diff options
Diffstat (limited to 'network/config')
27 files changed, 957 insertions, 43 deletions
diff --git a/network/config/bond-with-vlans/ceph-storage.yaml b/network/config/bond-with-vlans/ceph-storage.yaml index 93db8666..9f537c02 100644 --- a/network/config/bond-with-vlans/ceph-storage.yaml +++ b/network/config/bond-with-vlans/ceph-storage.yaml @@ -38,6 +38,19 @@ parameters: description: The ovs_options string for the bond interface. Set things like lacp=active and/or bond_mode=balance-slb using this option. type: string + constraints: + - allowed_pattern: "^((?!balance.tcp).)*$" + description: | + The balance-tcp bond mode is known to cause packet loss and + should not be used in BondInterfaceOvsOptions. + ExternalNetworkVlanID: + default: 10 + description: Vlan ID for the external network traffic. + type: number + InternalApiNetworkVlanID: + default: 20 + description: Vlan ID for the internal_api network traffic. + type: number StorageNetworkVlanID: default: 30 description: Vlan ID for the storage network traffic. @@ -46,6 +59,10 @@ parameters: default: 40 description: Vlan ID for the storage mgmt network traffic. type: number + TenantNetworkVlanID: + default: 50 + description: Vlan ID for the tenant network traffic. + type: number ManagementNetworkVlanID: default: 60 description: Vlan ID for the management network traffic. @@ -57,6 +74,14 @@ parameters: ControlPlaneDefaultRoute: # Override this via parameter_defaults description: The default route of the control plane network. type: string + ExternalInterfaceDefaultRoute: # Not used by default in this template + default: '10.0.0.1' + description: The default route of the external network. + type: string + ManagementInterfaceDefaultRoute: # Commented out by default in this template + default: unset + description: The default route of the management network. + type: string DnsServers: # Override this via parameter_defaults default: [] description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf. @@ -123,6 +148,8 @@ resources: - ip_netmask: {get_param: StorageMgmtIpSubnet} # Uncomment when including environments/network-management.yaml + # If setting default route on the Management interface, comment + # out the default route on the Control Plane. #- # type: vlan # device: bond1 @@ -130,6 +157,10 @@ resources: # addresses: # - # ip_netmask: {get_param: ManagementIpSubnet} + # routes: + # - + # default: true + # next_hop: {get_param: ManagementInterfaceDefaultRoute} outputs: OS::stack_id: diff --git a/network/config/bond-with-vlans/cinder-storage.yaml b/network/config/bond-with-vlans/cinder-storage.yaml index bea98c19..b4d71fa3 100644 --- a/network/config/bond-with-vlans/cinder-storage.yaml +++ b/network/config/bond-with-vlans/cinder-storage.yaml @@ -38,6 +38,15 @@ parameters: description: The ovs_options string for the bond interface. Set things like lacp=active and/or bond_mode=balance-slb using this option. type: string + constraints: + - allowed_pattern: "^((?!balance.tcp).)*$" + description: | + The balance-tcp bond mode is known to cause packet loss and + should not be used in BondInterfaceOvsOptions. + ExternalNetworkVlanID: + default: 10 + description: Vlan ID for the external network traffic. + type: number InternalApiNetworkVlanID: default: 20 description: Vlan ID for the internal_api network traffic. @@ -50,6 +59,10 @@ parameters: default: 40 description: Vlan ID for the storage mgmt network traffic. type: number + TenantNetworkVlanID: + default: 50 + description: Vlan ID for the tenant network traffic. + type: number ManagementNetworkVlanID: default: 60 description: Vlan ID for the management network traffic. @@ -61,6 +74,14 @@ parameters: ControlPlaneDefaultRoute: # Override this via parameter_defaults description: The default route of the control plane network. type: string + ExternalInterfaceDefaultRoute: # Not used by default in this template + default: '10.0.0.1' + description: The default route of the external network. + type: string + ManagementInterfaceDefaultRoute: # Commented out by default in this template + default: unset + description: The default route of the management network. + type: string DnsServers: # Override this via parameter_defaults default: [] description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf. @@ -134,6 +155,8 @@ resources: - ip_netmask: {get_param: StorageMgmtIpSubnet} # Uncomment when including environments/network-management.yaml + # If setting default route on the Management interface, comment + # out the default route on the Control Plane. #- # type: vlan # device: bond1 @@ -141,6 +164,10 @@ resources: # addresses: # - # ip_netmask: {get_param: ManagementIpSubnet} + # routes: + # - + # default: true + # next_hop: {get_param: ManagementInterfaceDefaultRoute} outputs: OS::stack_id: diff --git a/network/config/bond-with-vlans/compute-dpdk.yaml b/network/config/bond-with-vlans/compute-dpdk.yaml new file mode 100644 index 00000000..3fc764be --- /dev/null +++ b/network/config/bond-with-vlans/compute-dpdk.yaml @@ -0,0 +1,192 @@ +heat_template_version: 2015-04-30 + +description: > + Software Config to drive os-net-config with 2 bonded nics on a bridge + with VLANs attached for the compute role. + +parameters: + ControlPlaneIp: + default: '' + description: IP address/subnet on the ctlplane network + type: string + ExternalIpSubnet: + default: '' + description: IP address/subnet on the external network + type: string + InternalApiIpSubnet: + default: '' + description: IP address/subnet on the internal API network + type: string + StorageIpSubnet: + default: '' + description: IP address/subnet on the storage network + type: string + StorageMgmtIpSubnet: + default: '' + description: IP address/subnet on the storage mgmt network + type: string + TenantIpSubnet: + default: '' + description: IP address/subnet on the tenant network + type: string + ManagementIpSubnet: # Only populated when including environments/network-management.yaml + default: '' + description: IP address/subnet on the management network + type: string + BondInterfaceOvsOptions: + default: '' + description: The ovs_options string for the bond interface. Set things like + lacp=active and/or bond_mode=balance-slb using this option. + type: string + ExternalNetworkVlanID: + default: 10 + description: Vlan ID for the external network traffic. + type: number + InternalApiNetworkVlanID: + default: 20 + description: Vlan ID for the internal_api network traffic. + type: number + StorageNetworkVlanID: + default: 30 + description: Vlan ID for the storage network traffic. + type: number + StorageMgmtNetworkVlanID: + default: 40 + description: Vlan ID for the storage mgmt network traffic. + type: number + TenantNetworkVlanID: + default: 50 + description: Vlan ID for the tenant network traffic. + type: number + ManagementNetworkVlanID: + default: 60 + description: Vlan ID for the management network traffic. + type: number + ControlPlaneSubnetCidr: # Override this via parameter_defaults + default: '24' + description: The subnet CIDR of the control plane network. + type: string + ControlPlaneDefaultRoute: # Override this via parameter_defaults + description: The default route of the control plane network. + type: string + ExternalInterfaceDefaultRoute: # Not used by default in this template + default: '10.0.0.1' + description: The default route of the external network. + type: string + ManagementInterfaceDefaultRoute: # Commented out by default in this template + default: unset + description: The default route of the management network. + type: string + DnsServers: # Override this via parameter_defaults + default: [] + description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf. + type: comma_delimited_list + EC2MetadataIp: # Override this via parameter_defaults + description: The IP address of the EC2 metadata server. + type: string + +resources: + OsNetConfigImpl: + type: OS::Heat::StructuredConfig + properties: + group: os-apply-config + config: + os_net_config: + network_config: + - + type: interface + name: nic1 + use_dhcp: false + dns_servers: {get_param: DnsServers} + addresses: + - + ip_netmask: + list_join: + - '/' + - - {get_param: ControlPlaneIp} + - {get_param: ControlPlaneSubnetCidr} + routes: + - + ip_netmask: 169.254.169.254/32 + next_hop: {get_param: EC2MetadataIp} + - + default: true + next_hop: {get_param: ControlPlaneDefaultRoute} + - + type: ovs_bridge + name: {get_input: bridge_name} + members: + - + type: ovs_bond + name: bond1 + ovs_options: {get_param: BondInterfaceOvsOptions} + members: + - + type: interface + name: nic2 + primary: true + - + type: interface + name: nic3 + - + type: vlan + device: bond1 + vlan_id: {get_param: InternalApiNetworkVlanID} + addresses: + - + ip_netmask: {get_param: InternalApiIpSubnet} + - + type: vlan + device: bond1 + vlan_id: {get_param: StorageNetworkVlanID} + addresses: + - + ip_netmask: {get_param: StorageIpSubnet} + - + type: vlan + device: bond1 + vlan_id: {get_param: TenantNetworkVlanID} + addresses: + - + ip_netmask: {get_param: TenantIpSubnet} + # Uncomment when including environments/network-management.yaml + # If setting default route on the Management interface, comment + # out the default route on the Control Plane. + #- + # type: vlan + # device: bond1 + # vlan_id: {get_param: ManagementNetworkVlanID} + # addresses: + # - + # ip_netmask: {get_param: ManagementIpSubnet} + # routes: + # - + # default: true + # next_hop: {get_param: ManagementInterfaceDefaultRoute} + - + type: ovs_user_bridge + name: br-link + members: + - + type: ovs_dpdk_bond + name: dpdkbond0 + members: + - + type: ovs_dpdk_port + name: dpdk0 + members: + - + type: interface + name: nic4 + - + type: ovs_dpdk_port + name: dpdk1 + members: + - + type: interface + name: nic5 + +outputs: + OS::stack_id: + description: The OsNetConfigImpl resource. + value: {get_resource: OsNetConfigImpl} diff --git a/network/config/bond-with-vlans/compute.yaml b/network/config/bond-with-vlans/compute.yaml index 774bf02d..b2cfb0a2 100644 --- a/network/config/bond-with-vlans/compute.yaml +++ b/network/config/bond-with-vlans/compute.yaml @@ -38,6 +38,15 @@ parameters: description: The ovs_options string for the bond interface. Set things like lacp=active and/or bond_mode=balance-slb using this option. type: string + constraints: + - allowed_pattern: "^((?!balance.tcp).)*$" + description: | + The balance-tcp bond mode is known to cause packet loss and + should not be used in BondInterfaceOvsOptions. + ExternalNetworkVlanID: + default: 10 + description: Vlan ID for the external network traffic. + type: number InternalApiNetworkVlanID: default: 20 description: Vlan ID for the internal_api network traffic. @@ -46,6 +55,10 @@ parameters: default: 30 description: Vlan ID for the storage network traffic. type: number + StorageMgmtNetworkVlanID: + default: 40 + description: Vlan ID for the storage mgmt network traffic. + type: number TenantNetworkVlanID: default: 50 description: Vlan ID for the tenant network traffic. @@ -61,6 +74,14 @@ parameters: ControlPlaneDefaultRoute: # Override this via parameter_defaults description: The default route of the control plane network. type: string + ExternalInterfaceDefaultRoute: # Not used by default in this template + default: '10.0.0.1' + description: The default route of the external network. + type: string + ManagementInterfaceDefaultRoute: # Commented out by default in this template + default: unset + description: The default route of the management network. + type: string DnsServers: # Override this via parameter_defaults default: [] description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf. @@ -134,6 +155,8 @@ resources: - ip_netmask: {get_param: TenantIpSubnet} # Uncomment when including environments/network-management.yaml + # If setting default route on the Management interface, comment + # out the default route on the Control Plane. #- # type: vlan # device: bond1 @@ -141,6 +164,10 @@ resources: # addresses: # - # ip_netmask: {get_param: ManagementIpSubnet} + # routes: + # - + # default: true + # next_hop: {get_param: ManagementInterfaceDefaultRoute} outputs: OS::stack_id: diff --git a/network/config/bond-with-vlans/controller-no-external.yaml b/network/config/bond-with-vlans/controller-no-external.yaml index d9532439..4c3e59fa 100644 --- a/network/config/bond-with-vlans/controller-no-external.yaml +++ b/network/config/bond-with-vlans/controller-no-external.yaml @@ -38,6 +38,11 @@ parameters: description: The ovs_options string for the bond interface. Set things like lacp=active and/or bond_mode=balance-slb using this option. type: string + constraints: + - allowed_pattern: "^((?!balance.tcp).)*$" + description: | + The balance-tcp bond mode is known to cause packet loss and + should not be used in BondInterfaceOvsOptions. ExternalNetworkVlanID: default: 10 description: Vlan ID for the external network traffic. @@ -62,10 +67,17 @@ parameters: default: 60 description: Vlan ID for the management network traffic. type: number + ControlPlaneDefaultRoute: # Override this via parameter_defaults + description: The default route of the control plane network. + type: string ExternalInterfaceDefaultRoute: default: '10.0.0.1' description: default route for the external network type: string + ManagementInterfaceDefaultRoute: # Commented out by default in this template + default: unset + description: The default route of the management network. + type: string ControlPlaneSubnetCidr: # Override this via parameter_defaults default: '24' description: The subnet CIDR of the control plane network. @@ -102,6 +114,9 @@ resources: - ip_netmask: 169.254.169.254/32 next_hop: {get_param: EC2MetadataIp} + - + default: true + next_hop: {get_param: ControlPlaneDefaultRoute} - type: ovs_bridge name: {get_input: bridge_name} @@ -148,6 +163,8 @@ resources: - ip_netmask: {get_param: TenantIpSubnet} # Uncomment when including environments/network-management.yaml + # If setting default route on the Management interface, comment + # out the default route on the Control Plane. #- # type: vlan # device: bond1 @@ -155,6 +172,10 @@ resources: # addresses: # - # ip_netmask: {get_param: ManagementIpSubnet} + # routes: + # - + # default: true + # next_hop: {get_param: ManagementInterfaceDefaultRoute} outputs: OS::stack_id: diff --git a/network/config/bond-with-vlans/controller-v6.yaml b/network/config/bond-with-vlans/controller-v6.yaml index 7869ebfc..1361d969 100644 --- a/network/config/bond-with-vlans/controller-v6.yaml +++ b/network/config/bond-with-vlans/controller-v6.yaml @@ -40,6 +40,11 @@ parameters: description: The ovs_options string for the bond interface. Set things like lacp=active and/or bond_mode=balance-slb using this option. type: string + constraints: + - allowed_pattern: "^((?!balance.tcp).)*$" + description: | + The balance-tcp bond mode is known to cause packet loss and + should not be used in BondInterfaceOvsOptions. ExternalNetworkVlanID: default: 10 description: Vlan ID for the external network traffic. @@ -64,10 +69,6 @@ parameters: default: 60 description: Vlan ID for the management network traffic. type: number - ExternalInterfaceDefaultRoute: - default: '10.0.0.1' - description: default route for the external network - type: string ControlPlaneSubnetCidr: # Override this via parameter_defaults default: '24' description: The subnet CIDR of the control plane network. @@ -75,6 +76,14 @@ parameters: ControlPlaneDefaultRoute: # Override this via parameter_defaults description: The default route of the control plane network. type: string + ExternalInterfaceDefaultRoute: + default: '10.0.0.1' + description: default route for the external network + type: string + ManagementInterfaceDefaultRoute: # Commented out by default in this template + default: unset + description: The default route of the management network. + type: string DnsServers: # Override this via parameter_defaults default: [] description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf. @@ -106,6 +115,7 @@ resources: - ip_netmask: 169.254.169.254/32 next_hop: {get_param: EC2MetadataIp} + # IPv4 Default Route - default: true next_hop: {get_param: ControlPlaneDefaultRoute} @@ -134,6 +144,7 @@ resources: - ip_netmask: {get_param: ExternalIpSubnet} routes: + # IPv6 Default Route - default: true next_hop: {get_param: ExternalInterfaceDefaultRoute} @@ -166,6 +177,9 @@ resources: - ip_netmask: {get_param: TenantIpSubnet} # Uncomment when including environments/network-management.yaml + # If setting default route on the Management interface, comment + # out the default route on the External interface. This will + # make the External API unreachable from remote subnets. #- # type: vlan # device: bond1 @@ -173,6 +187,10 @@ resources: # addresses: # - # ip_netmask: {get_param: ManagementIpSubnet} + # routes: + # - + # default: true + # next_hop: {get_param: ManagementInterfaceDefaultRoute} outputs: OS::stack_id: diff --git a/network/config/bond-with-vlans/controller.yaml b/network/config/bond-with-vlans/controller.yaml index d3627ead..677c90c5 100644 --- a/network/config/bond-with-vlans/controller.yaml +++ b/network/config/bond-with-vlans/controller.yaml @@ -38,6 +38,11 @@ parameters: description: The ovs_options string for the bond interface. Set things like lacp=active and/or bond_mode=balance-slb using this option. type: string + constraints: + - allowed_pattern: "^((?!balance.tcp).)*$" + description: | + The balance-tcp bond mode is known to cause packet loss and + should not be used in BondInterfaceOvsOptions. ExternalNetworkVlanID: default: 10 description: Vlan ID for the external network traffic. @@ -62,10 +67,17 @@ parameters: default: 60 description: Vlan ID for the management network traffic. type: number + ControlPlaneDefaultRoute: # Override this via parameter_defaults + description: The default route of the control plane network. + type: string ExternalInterfaceDefaultRoute: default: '10.0.0.1' description: default route for the external network type: string + ManagementInterfaceDefaultRoute: # Commented out by default in this template + default: unset + description: The default route of the management network. + type: string ControlPlaneSubnetCidr: # Override this via parameter_defaults default: '24' description: The subnet CIDR of the control plane network. @@ -158,6 +170,9 @@ resources: - ip_netmask: {get_param: TenantIpSubnet} # Uncomment when including environments/network-management.yaml + # If setting default route on the Management interface, comment + # out the default route on the External interface. This will + # make the External API unreachable from remote subnets. #- # type: vlan # device: bond1 @@ -165,6 +180,10 @@ resources: # addresses: # - # ip_netmask: {get_param: ManagementIpSubnet} + # routes: + # - + # default: true + # next_hop: {get_param: ManagementInterfaceDefaultRoute} outputs: OS::stack_id: diff --git a/network/config/bond-with-vlans/swift-storage.yaml b/network/config/bond-with-vlans/swift-storage.yaml index de9121e5..e16d6b6e 100644 --- a/network/config/bond-with-vlans/swift-storage.yaml +++ b/network/config/bond-with-vlans/swift-storage.yaml @@ -38,6 +38,15 @@ parameters: description: The ovs_options string for the bond interface. Set things like lacp=active and/or bond_mode=balance-slb using this option. type: string + constraints: + - allowed_pattern: "^((?!balance.tcp).)*$" + description: | + The balance-tcp bond mode is known to cause packet loss and + should not be used in BondInterfaceOvsOptions. + ExternalNetworkVlanID: + default: 10 + description: Vlan ID for the external network traffic. + type: number InternalApiNetworkVlanID: default: 20 description: Vlan ID for the internal_api network traffic. @@ -50,6 +59,10 @@ parameters: default: 40 description: Vlan ID for the storage mgmt network traffic. type: number + TenantNetworkVlanID: + default: 50 + description: Vlan ID for the tenant network traffic. + type: number ManagementNetworkVlanID: default: 60 description: Vlan ID for the management network traffic. @@ -61,6 +74,14 @@ parameters: ControlPlaneDefaultRoute: # Override this via parameter_defaults description: The default route of the control plane network. type: string + ExternalInterfaceDefaultRoute: # Not used by default in this template + default: '10.0.0.1' + description: The default route of the external network. + type: string + ManagementInterfaceDefaultRoute: # Commented out by default in this template + default: unset + description: The default route of the management network. + type: string DnsServers: # Override this via parameter_defaults default: [] description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf. @@ -134,6 +155,8 @@ resources: - ip_netmask: {get_param: StorageMgmtIpSubnet} # Uncomment when including environments/network-management.yaml + # If setting default route on the Management interface, comment + # out the default route on the Control Plane. #- # type: vlan # device: bond1 @@ -141,6 +164,10 @@ resources: # addresses: # - # ip_netmask: {get_param: ManagementIpSubnet} + # routes: + # - + # default: true + # next_hop: {get_param: ManagementInterfaceDefaultRoute} outputs: OS::stack_id: diff --git a/network/config/multiple-nics/ceph-storage.yaml b/network/config/multiple-nics/ceph-storage.yaml index 84cb0f12..c31c6e65 100644 --- a/network/config/multiple-nics/ceph-storage.yaml +++ b/network/config/multiple-nics/ceph-storage.yaml @@ -57,10 +57,6 @@ parameters: default: 60 description: Vlan ID for the management network traffic. type: number - ExternalInterfaceDefaultRoute: - default: '10.0.0.1' - description: default route for the external network - type: string ControlPlaneSubnetCidr: # Override this via parameter_defaults default: '24' description: The subnet CIDR of the control plane network. @@ -68,6 +64,14 @@ parameters: ControlPlaneDefaultRoute: # Override this via parameter_defaults description: The default route of the control plane network. type: string + ExternalInterfaceDefaultRoute: # Not used by default in this template + default: '10.0.0.1' + description: The default route of the external network. + type: string + ManagementInterfaceDefaultRoute: # Commented out by default in this template + default: unset + description: The default route of the management network. + type: string DnsServers: # Override this via parameter_defaults default: [] description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf. @@ -118,6 +122,8 @@ resources: - ip_netmask: {get_param: StorageMgmtIpSubnet} # Uncomment when including environments/network-management.yaml + # If setting default route on the Management interface, comment + # out the default route on the Control Plane. #- # type: interface # name: nic7 @@ -125,6 +131,10 @@ resources: # addresses: # - # ip_netmask: {get_param: ManagementIpSubnet} + # routes: + # - + # default: true + # next_hop: {get_param: ManagementInterfaceDefaultRoute} outputs: OS::stack_id: diff --git a/network/config/multiple-nics/cinder-storage.yaml b/network/config/multiple-nics/cinder-storage.yaml index 0b0218c5..4f8b7f64 100644 --- a/network/config/multiple-nics/cinder-storage.yaml +++ b/network/config/multiple-nics/cinder-storage.yaml @@ -57,10 +57,6 @@ parameters: default: 60 description: Vlan ID for the management network traffic. type: number - ExternalInterfaceDefaultRoute: - default: '10.0.0.1' - description: default route for the external network - type: string ControlPlaneSubnetCidr: # Override this via parameter_defaults default: '24' description: The subnet CIDR of the control plane network. @@ -68,6 +64,14 @@ parameters: ControlPlaneDefaultRoute: # Override this via parameter_defaults description: The default route of the control plane network. type: string + ExternalInterfaceDefaultRoute: # Not used by default in this template + default: '10.0.0.1' + description: The default route of the external network. + type: string + ManagementInterfaceDefaultRoute: # Commented out by default in this template + default: unset + description: The default route of the management network. + type: string DnsServers: # Override this via parameter_defaults default: [] description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf. @@ -125,6 +129,8 @@ resources: - ip_netmask: {get_param: InternalApiIpSubnet} # Uncomment when including environments/network-management.yaml + # If setting default route on the Management interface, comment + # out the default route on the Control Plane. #- # type: interface # name: nic7 @@ -132,6 +138,10 @@ resources: # addresses: # - # ip_netmask: {get_param: ManagementIpSubnet} + # routes: + # - + # default: true + # next_hop: {get_param: ManagementInterfaceDefaultRoute} outputs: OS::stack_id: diff --git a/network/config/multiple-nics/compute.yaml b/network/config/multiple-nics/compute.yaml index 97eef52b..77514745 100644 --- a/network/config/multiple-nics/compute.yaml +++ b/network/config/multiple-nics/compute.yaml @@ -57,10 +57,6 @@ parameters: default: 60 description: Vlan ID for the management network traffic. type: number - ExternalInterfaceDefaultRoute: - default: '10.0.0.1' - description: default route for the external network - type: string ControlPlaneSubnetCidr: # Override this via parameter_defaults default: '24' description: The subnet CIDR of the control plane network. @@ -68,6 +64,14 @@ parameters: ControlPlaneDefaultRoute: # Override this via parameter_defaults description: The default route of the control plane network. type: string + ExternalInterfaceDefaultRoute: # Not used by default in this template + default: '10.0.0.1' + description: The default route of the external network. + type: string + ManagementInterfaceDefaultRoute: # Commented out by default in this template + default: unset + description: The default route of the management network. + type: string DnsServers: # Override this via parameter_defaults default: [] description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf. @@ -133,6 +137,8 @@ resources: # force the MAC address of the bridge to this interface primary: true # Uncomment when including environments/network-management.yaml + # If setting default route on the Management interface, comment + # out the default route on the Control Plane. #- # type: interface # name: nic7 @@ -140,6 +146,10 @@ resources: # addresses: # - # ip_netmask: {get_param: ManagementIpSubnet} + # routes: + # - + # default: true + # next_hop: {get_param: ManagementInterfaceDefaultRoute} outputs: OS::stack_id: diff --git a/network/config/multiple-nics/controller-v6.yaml b/network/config/multiple-nics/controller-v6.yaml index b69879fb..da1f95f1 100644 --- a/network/config/multiple-nics/controller-v6.yaml +++ b/network/config/multiple-nics/controller-v6.yaml @@ -59,10 +59,6 @@ parameters: default: 60 description: Vlan ID for the management network traffic. type: number - ExternalInterfaceDefaultRoute: - default: '10.0.0.1' - description: default route for the external network - type: string ControlPlaneSubnetCidr: # Override this via parameter_defaults default: '24' description: The subnet CIDR of the control plane network. @@ -70,6 +66,14 @@ parameters: ControlPlaneDefaultRoute: # Override this via parameter_defaults description: The default route of the control plane network. type: string + ExternalInterfaceDefaultRoute: + default: '10.0.0.1' + description: default route for the external network + type: string + ManagementInterfaceDefaultRoute: # Commented out by default in this template + default: unset + description: The default route of the management network. + type: string DnsServers: # Override this via parameter_defaults default: [] description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf. @@ -102,6 +106,7 @@ resources: - ip_netmask: 169.254.169.254/32 next_hop: {get_param: EC2MetadataIp} + # IPv4 Default Route - default: true next_hop: {get_param: ControlPlaneDefaultRoute} @@ -150,6 +155,7 @@ resources: - ip_netmask: {get_param: ExternalIpSubnet} routes: + # IPv6 Default Route - default: true next_hop: {get_param: ExternalInterfaceDefaultRoute} @@ -160,6 +166,9 @@ resources: # force the MAC address of the bridge to this interface primary: true # Uncomment when including environments/network-management.yaml + # If setting default route on the Management interface, comment + # out the default route on the External interface. This will + # make the External API unreachable from remote subnets. #- # type: interface # name: nic7 @@ -167,6 +176,10 @@ resources: # addresses: # - # ip_netmask: {get_param: ManagementIpSubnet} + # routes: + # - + # default: true + # next_hop: {get_param: ManagementInterfaceDefaultRoute} outputs: OS::stack_id: diff --git a/network/config/multiple-nics/controller.yaml b/network/config/multiple-nics/controller.yaml index 377fd116..7a1f9e5f 100644 --- a/network/config/multiple-nics/controller.yaml +++ b/network/config/multiple-nics/controller.yaml @@ -57,10 +57,6 @@ parameters: default: 60 description: Vlan ID for the management network traffic. type: number - ExternalInterfaceDefaultRoute: - default: '10.0.0.1' - description: default route for the external network - type: string ControlPlaneSubnetCidr: # Override this via parameter_defaults default: '24' description: The subnet CIDR of the control plane network. @@ -68,6 +64,14 @@ parameters: ControlPlaneDefaultRoute: # Override this via parameter_defaults description: The default route of the control plane network. type: string + ExternalInterfaceDefaultRoute: + default: '10.0.0.1' + description: default route for the external network + type: string + ManagementInterfaceDefaultRoute: # Commented out by default in this template + default: unset + description: The default route of the management network. + type: string DnsServers: # Override this via parameter_defaults default: [] description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf. @@ -155,6 +159,9 @@ resources: # force the MAC address of the bridge to this interface primary: true # Uncomment when including environments/network-management.yaml + # If setting default route on the Management interface, comment + # out the default route on the External interface. This will + # make the External API unreachable from remote subnets. #- # type: interface # name: nic7 @@ -162,6 +169,10 @@ resources: # addresses: # - # ip_netmask: {get_param: ManagementIpSubnet} + # routes: + # - + # default: true + # next_hop: {get_param: ManagementInterfaceDefaultRoute} outputs: OS::stack_id: diff --git a/network/config/multiple-nics/swift-storage.yaml b/network/config/multiple-nics/swift-storage.yaml index b75bbd6e..05083105 100644 --- a/network/config/multiple-nics/swift-storage.yaml +++ b/network/config/multiple-nics/swift-storage.yaml @@ -57,10 +57,6 @@ parameters: default: 60 description: Vlan ID for the management network traffic. type: number - ExternalInterfaceDefaultRoute: - default: '10.0.0.1' - description: default route for the external network - type: string ControlPlaneSubnetCidr: # Override this via parameter_defaults default: '24' description: The subnet CIDR of the control plane network. @@ -68,6 +64,14 @@ parameters: ControlPlaneDefaultRoute: # Override this via parameter_defaults description: The default route of the control plane network. type: string + ExternalInterfaceDefaultRoute: # Not used by default in this template + default: '10.0.0.1' + description: The default route of the external network. + type: string + ManagementInterfaceDefaultRoute: # Commented out by default in this template + default: unset + description: The default route of the management network. + type: string DnsServers: # Override this via parameter_defaults default: [] description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf. @@ -125,6 +129,8 @@ resources: - ip_netmask: {get_param: InternalApiIpSubnet} # Uncomment when including environments/network-management.yaml + # If setting default route on the Management interface, comment + # out the default route on the Control Plane. #- # type: interface # name: nic7 @@ -132,6 +138,10 @@ resources: # addresses: # - # ip_netmask: {get_param: ManagementIpSubnet} + # routes: + # - + # default: true + # next_hop: {get_param: ManagementInterfaceDefaultRoute} outputs: OS::stack_id: diff --git a/network/config/single-nic-linux-bridge-vlans/ceph-storage.yaml b/network/config/single-nic-linux-bridge-vlans/ceph-storage.yaml index a46d7e20..fc8e8b6f 100644 --- a/network/config/single-nic-linux-bridge-vlans/ceph-storage.yaml +++ b/network/config/single-nic-linux-bridge-vlans/ceph-storage.yaml @@ -29,6 +29,18 @@ parameters: default: '' description: IP address/subnet on the tenant network type: string + ManagementIpSubnet: # Only populated when including environments/network-management.yaml + default: '' + description: IP address/subnet on the management network + type: string + ExternalNetworkVlanID: + default: 10 + description: Vlan ID for the external network traffic. + type: number + InternalApiNetworkVlanID: + default: 20 + description: Vlan ID for the internal_api network traffic. + type: number StorageNetworkVlanID: default: 30 description: Vlan ID for the storage network traffic. @@ -37,6 +49,14 @@ parameters: default: 40 description: Vlan ID for the storage mgmt network traffic. type: number + TenantNetworkVlanID: + default: 50 + description: Vlan ID for the tenant network traffic. + type: number + ManagementNetworkVlanID: + default: 60 + description: Vlan ID for the management network traffic. + type: number ControlPlaneSubnetCidr: # Override this via parameter_defaults default: '24' description: The subnet CIDR of the control plane network. @@ -44,6 +64,14 @@ parameters: ControlPlaneDefaultRoute: # Override this via parameter_defaults description: The default route of the control plane network. type: string + ExternalInterfaceDefaultRoute: # Not used by default in this template + default: '10.0.0.1' + description: The default route of the external network. + type: string + ManagementInterfaceDefaultRoute: # Commented out by default in this template + default: unset + description: The default route of the management network. + type: string DnsServers: # Override this via parameter_defaults default: [] description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf. @@ -99,6 +127,20 @@ resources: addresses: - ip_netmask: {get_param: StorageMgmtIpSubnet} + # Uncomment when including environments/network-management.yaml + # If setting default route on the Management interface, comment + # out the default route on the Control Plane. + #- + # type: vlan + # vlan_id: {get_param: ManagementNetworkVlanID} + # device: br-storage + # addresses: + # - + # ip_netmask: {get_param: ManagementIpSubnet} + # routes: + # - + # default: true + # next_hop: {get_param: ManagementInterfaceDefaultRoute} outputs: OS::stack_id: diff --git a/network/config/single-nic-linux-bridge-vlans/cinder-storage.yaml b/network/config/single-nic-linux-bridge-vlans/cinder-storage.yaml index 08613a3b..6fb247ed 100644 --- a/network/config/single-nic-linux-bridge-vlans/cinder-storage.yaml +++ b/network/config/single-nic-linux-bridge-vlans/cinder-storage.yaml @@ -29,6 +29,14 @@ parameters: default: '' description: IP address/subnet on the tenant network type: string + ManagementIpSubnet: # Only populated when including environments/network-management.yaml + default: '' + description: IP address/subnet on the management network + type: string + ExternalNetworkVlanID: + default: 10 + description: Vlan ID for the external network traffic. + type: number InternalApiNetworkVlanID: default: 20 description: Vlan ID for the internal_api network traffic. @@ -41,6 +49,14 @@ parameters: default: 40 description: Vlan ID for the storage mgmt network traffic. type: number + TenantNetworkVlanID: + default: 50 + description: Vlan ID for the tenant network traffic. + type: number + ManagementNetworkVlanID: + default: 60 + description: Vlan ID for the management network traffic. + type: number ControlPlaneSubnetCidr: # Override this via parameter_defaults default: '24' description: The subnet CIDR of the control plane network. @@ -48,6 +64,14 @@ parameters: ControlPlaneDefaultRoute: # Override this via parameter_defaults description: The default route of the control plane network. type: string + ExternalInterfaceDefaultRoute: # Not used by default in this template + default: '10.0.0.1' + description: The default route of the external network. + type: string + ManagementInterfaceDefaultRoute: # Commented out by default in this template + default: unset + description: The default route of the management network. + type: string DnsServers: # Override this via parameter_defaults default: [] description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf. @@ -110,6 +134,20 @@ resources: addresses: - ip_netmask: {get_param: StorageMgmtIpSubnet} + # Uncomment when including environments/network-management.yaml + # If setting default route on the Management interface, comment + # out the default route on the Control Plane. + #- + # type: vlan + # vlan_id: {get_param: ManagementNetworkVlanID} + # device: br-storage + # addresses: + # - + # ip_netmask: {get_param: ManagementIpSubnet} + # routes: + # - + # default: true + # next_hop: {get_param: ManagementInterfaceDefaultRoute} outputs: OS::stack_id: diff --git a/network/config/single-nic-linux-bridge-vlans/compute.yaml b/network/config/single-nic-linux-bridge-vlans/compute.yaml index b6522c67..e31720d8 100644 --- a/network/config/single-nic-linux-bridge-vlans/compute.yaml +++ b/network/config/single-nic-linux-bridge-vlans/compute.yaml @@ -29,6 +29,14 @@ parameters: default: '' description: IP address/subnet on the tenant network type: string + ManagementIpSubnet: # Only populated when including environments/network-management.yaml + default: '' + description: IP address/subnet on the management network + type: string + ExternalNetworkVlanID: + default: 10 + description: Vlan ID for the external network traffic. + type: number InternalApiNetworkVlanID: default: 20 description: Vlan ID for the internal_api network traffic. @@ -37,10 +45,18 @@ parameters: default: 30 description: Vlan ID for the storage network traffic. type: number + StorageMgmtNetworkVlanID: + default: 40 + description: Vlan ID for the storage mgmt network traffic. + type: number TenantNetworkVlanID: default: 50 description: Vlan ID for the tenant network traffic. type: number + ManagementNetworkVlanID: + default: 60 + description: Vlan ID for the management network traffic. + type: number ControlPlaneSubnetCidr: # Override this via parameter_defaults default: '24' description: The subnet CIDR of the control plane network. @@ -48,6 +64,14 @@ parameters: ControlPlaneDefaultRoute: # Override this via parameter_defaults description: The default route of the control plane network. type: string + ExternalInterfaceDefaultRoute: # Not used by default in this template + default: '10.0.0.1' + description: The default route of the external network. + type: string + ManagementInterfaceDefaultRoute: # Commented out by default in this template + default: unset + description: The default route of the management network. + type: string DnsServers: # Override this via parameter_defaults default: [] description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf. @@ -81,7 +105,6 @@ resources: ip_netmask: 169.254.169.254/32 next_hop: {get_param: EC2MetadataIp} - - ip_netmask: 0.0.0.0/0 default: true next_hop: {get_param: ControlPlaneDefaultRoute} members: @@ -111,6 +134,20 @@ resources: addresses: - ip_netmask: {get_param: TenantIpSubnet} + # Uncomment when including environments/network-management.yaml + # If setting default route on the Management interface, comment + # out the default route on the Control Plane. + #- + # type: vlan + # vlan_id: {get_param: ManagementNetworkVlanID} + # device: {get_input: bridge_name} + # addresses: + # - + # ip_netmask: {get_param: ManagementIpSubnet} + # routes: + # - + # default: true + # next_hop: {get_param: ManagementInterfaceDefaultRoute} outputs: OS::stack_id: diff --git a/network/config/single-nic-linux-bridge-vlans/controller-v6.yaml b/network/config/single-nic-linux-bridge-vlans/controller-v6.yaml new file mode 100644 index 00000000..80125149 --- /dev/null +++ b/network/config/single-nic-linux-bridge-vlans/controller-v6.yaml @@ -0,0 +1,178 @@ +heat_template_version: 2015-04-30 + +description: > + Software Config to drive os-net-config to configure VLANs for the + controller role with IPv6 on the External network. The IPv6 default + route is on the External network, and the IPv4 default route is on + the Control Plane. + +parameters: + ControlPlaneIp: + default: '' + description: IP address/subnet on the ctlplane network + type: string + ExternalIpSubnet: + default: '' + description: IP address/subnet on the external network + type: string + InternalApiIpSubnet: + default: '' + description: IP address/subnet on the internal API network + type: string + StorageIpSubnet: + default: '' + description: IP address/subnet on the storage network + type: string + StorageMgmtIpSubnet: + default: '' + description: IP address/subnet on the storage mgmt network + type: string + TenantIpSubnet: + default: '' + description: IP address/subnet on the tenant network + type: string + ManagementIpSubnet: # Only populated when including environments/network-management.yaml + default: '' + description: IP address/subnet on the management network + type: string + ExternalNetworkVlanID: + default: 10 + description: Vlan ID for the external network traffic. + type: number + InternalApiNetworkVlanID: + default: 20 + description: Vlan ID for the internal_api network traffic. + type: number + StorageNetworkVlanID: + default: 30 + description: Vlan ID for the storage network traffic. + type: number + StorageMgmtNetworkVlanID: + default: 40 + description: Vlan ID for the storage mgmt network traffic. + type: number + TenantNetworkVlanID: + default: 50 + description: Vlan ID for the tenant network traffic. + type: number + ManagementNetworkVlanID: + default: 60 + description: Vlan ID for the management network traffic. + type: number + ControlPlaneDefaultRoute: # Override this via parameter_defaults + description: The default route of the control plane network. + type: string + ExternalInterfaceDefaultRoute: + default: '10.0.0.1' + description: default route for the external network + type: string + ManagementInterfaceDefaultRoute: # Commented out by default in this template + default: unset + description: The default route of the management network. + type: string + ControlPlaneSubnetCidr: # Override this via parameter_defaults + default: '24' + description: The subnet CIDR of the control plane network. + type: string + DnsServers: # Override this via parameter_defaults + default: [] + description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf. + type: comma_delimited_list + EC2MetadataIp: # Override this via parameter_defaults + description: The IP address of the EC2 metadata server. + type: string + +resources: + OsNetConfigImpl: + type: OS::Heat::StructuredConfig + properties: + group: os-apply-config + config: + os_net_config: + network_config: + - + type: linux_bridge + name: {get_input: bridge_name} + use_dhcp: false + dns_servers: {get_param: DnsServers} + addresses: + - + ip_netmask: + list_join: + - '/' + - - {get_param: ControlPlaneIp} + - {get_param: ControlPlaneSubnetCidr} + routes: + - + ip_netmask: 169.254.169.254/32 + next_hop: {get_param: EC2MetadataIp} + # IPv4 Default Route + - + default: true + next_hop: {get_param: ControlPlaneDefaultRoute} + members: + - + type: interface + name: {get_input: interface_name} + # force the MAC address of the bridge to this interface + primary: true + - + type: vlan + vlan_id: {get_param: ExternalNetworkVlanID} + device: {get_input: bridge_name} + addresses: + - + ip_netmask: {get_param: ExternalIpSubnet} + routes: + # IPv6 Default Route + - + default: true + next_hop: {get_param: ExternalInterfaceDefaultRoute} + - + type: vlan + vlan_id: {get_param: InternalApiNetworkVlanID} + device: {get_input: bridge_name} + addresses: + - + ip_netmask: {get_param: InternalApiIpSubnet} + - + type: vlan + vlan_id: {get_param: StorageNetworkVlanID} + device: {get_input: bridge_name} + addresses: + - + ip_netmask: {get_param: StorageIpSubnet} + - + type: vlan + vlan_id: {get_param: StorageMgmtNetworkVlanID} + device: {get_input: bridge_name} + addresses: + - + ip_netmask: {get_param: StorageMgmtIpSubnet} + - + type: vlan + vlan_id: {get_param: TenantNetworkVlanID} + device: {get_input: bridge_name} + addresses: + - + ip_netmask: {get_param: TenantIpSubnet} + # Uncomment when including environments/network-management.yaml + # If setting default route on the Management interface, comment + # out the default route on the External interface. This will + # make the External API unreachable from remote subnets. + #- + # type: vlan + # vlan_id: {get_param: ManagementNetworkVlanID} + # device: {get_input: bridge_name} + # addresses: + # - + # ip_netmask: {get_param: ManagementIpSubnet} + # routes: + # - + # default: true + # next_hop: {get_param: ManagementInterfaceDefaultRoute} + +outputs: + OS::stack_id: + description: The OsNetConfigImpl resource. + value: {get_resource: OsNetConfigImpl} diff --git a/network/config/single-nic-linux-bridge-vlans/controller.yaml b/network/config/single-nic-linux-bridge-vlans/controller.yaml index 72105481..aef5d4e3 100644 --- a/network/config/single-nic-linux-bridge-vlans/controller.yaml +++ b/network/config/single-nic-linux-bridge-vlans/controller.yaml @@ -29,6 +29,10 @@ parameters: default: '' description: IP address/subnet on the tenant network type: string + ManagementIpSubnet: # Only populated when including environments/network-management.yaml + default: '' + description: IP address/subnet on the management network + type: string ExternalNetworkVlanID: default: 10 description: Vlan ID for the external network traffic. @@ -49,10 +53,21 @@ parameters: default: 50 description: Vlan ID for the tenant network traffic. type: number + ManagementNetworkVlanID: + default: 60 + description: Vlan ID for the management network traffic. + type: number + ControlPlaneDefaultRoute: # Override this via parameter_defaults + description: The default route of the control plane network. + type: string ExternalInterfaceDefaultRoute: default: '10.0.0.1' description: default route for the external network type: string + ManagementInterfaceDefaultRoute: # Commented out by default in this template + default: unset + description: The default route of the management network. + type: string ControlPlaneSubnetCidr: # Override this via parameter_defaults default: '24' description: The subnet CIDR of the control plane network. @@ -64,9 +79,6 @@ parameters: EC2MetadataIp: # Override this via parameter_defaults description: The IP address of the EC2 metadata server. type: string - ControlPlaneDefaultRoute: # Override this via parameter_defaults - description: The default route of the control plane network. - type: string resources: OsNetConfigImpl: @@ -92,8 +104,8 @@ resources: - ip_netmask: 169.254.169.254/32 next_hop: {get_param: EC2MetadataIp} + # IPv4 Default Route - - ip_netmask: 0.0.0.0/0 default: true next_hop: {get_param: ControlPlaneDefaultRoute} members: @@ -110,8 +122,8 @@ resources: - ip_netmask: {get_param: ExternalIpSubnet} routes: + # IPv6 Default Route - - ip_netmask: 0.0.0.0/0 default: true next_hop: {get_param: ExternalInterfaceDefaultRoute} - @@ -142,6 +154,21 @@ resources: addresses: - ip_netmask: {get_param: TenantIpSubnet} + # Uncomment when including environments/network-management.yaml + # If setting default route on the Management interface, comment + # out the default route on the External interface. This will + # make the External API unreachable from remote subnets. + #- + # type: vlan + # vlan_id: {get_param: ManagementNetworkVlanID} + # device: {get_input: bridge_name} + # addresses: + # - + # ip_netmask: {get_param: ManagementIpSubnet} + # routes: + # - + # default: true + # next_hop: {get_param: ManagementInterfaceDefaultRoute} outputs: OS::stack_id: diff --git a/network/config/single-nic-linux-bridge-vlans/swift-storage.yaml b/network/config/single-nic-linux-bridge-vlans/swift-storage.yaml index 962b9890..a5d2f966 100644 --- a/network/config/single-nic-linux-bridge-vlans/swift-storage.yaml +++ b/network/config/single-nic-linux-bridge-vlans/swift-storage.yaml @@ -29,6 +29,14 @@ parameters: default: '' description: IP address/subnet on the tenant network type: string + ManagementIpSubnet: # Only populated when including environments/network-management.yaml + default: '' + description: IP address/subnet on the management network + type: string + ExternalNetworkVlanID: + default: 10 + description: Vlan ID for the external network traffic. + type: number InternalApiNetworkVlanID: default: 20 description: Vlan ID for the internal_api network traffic. @@ -41,6 +49,14 @@ parameters: default: 40 description: Vlan ID for the storage mgmt network traffic. type: number + TenantNetworkVlanID: + default: 50 + description: Vlan ID for the tenant network traffic. + type: number + ManagementNetworkVlanID: + default: 60 + description: Vlan ID for the management network traffic. + type: number ControlPlaneSubnetCidr: # Override this via parameter_defaults default: '24' description: The subnet CIDR of the control plane network. @@ -48,6 +64,14 @@ parameters: ControlPlaneDefaultRoute: # Override this via parameter_defaults description: The default route of the control plane network. type: string + ExternalInterfaceDefaultRoute: # Not used by default in this template + default: '10.0.0.1' + description: The default route of the external network. + type: string + ManagementInterfaceDefaultRoute: # Commented out by default in this template + default: unset + description: The default route of the management network. + type: string DnsServers: # Override this via parameter_defaults default: [] description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf. @@ -110,6 +134,20 @@ resources: addresses: - ip_netmask: {get_param: StorageMgmtIpSubnet} + # Uncomment when including environments/network-management.yaml + # If setting default route on the Management interface, comment + # out the default route on the Control Plane. + #- + # type: vlan + # vlan_id: {get_param: ManagementNetworkVlanID} + # device: br-storage + # addresses: + # - + # ip_netmask: {get_param: ManagementIpSubnet} + # routes: + # - + # default: true + # next_hop: {get_param: ManagementInterfaceDefaultRoute} outputs: OS::stack_id: diff --git a/network/config/single-nic-vlans/ceph-storage.yaml b/network/config/single-nic-vlans/ceph-storage.yaml index 80bc32d3..6fa288af 100644 --- a/network/config/single-nic-vlans/ceph-storage.yaml +++ b/network/config/single-nic-vlans/ceph-storage.yaml @@ -52,6 +52,14 @@ parameters: ControlPlaneDefaultRoute: # Override this via parameter_defaults description: The default route of the control plane network. type: string + ExternalInterfaceDefaultRoute: # Not used by default in this template + default: '10.0.0.1' + description: The default route of the external network. + type: string + ManagementInterfaceDefaultRoute: # Commented out by default in this template + default: unset + description: The default route of the management network. + type: string DnsServers: # Override this via parameter_defaults default: [] description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf. @@ -106,12 +114,18 @@ resources: - ip_netmask: {get_param: StorageMgmtIpSubnet} # Uncomment when including environments/network-management.yaml + # If setting default route on the Management interface, comment + # out the default route on the Control Plane. #- # type: vlan # vlan_id: {get_param: ManagementNetworkVlanID} # addresses: # - # ip_netmask: {get_param: ManagementIpSubnet} + # routes: + # - + # default: true + # next_hop: {get_param: ManagementInterfaceDefaultRoute} outputs: OS::stack_id: diff --git a/network/config/single-nic-vlans/cinder-storage.yaml b/network/config/single-nic-vlans/cinder-storage.yaml index e509443a..d1135776 100644 --- a/network/config/single-nic-vlans/cinder-storage.yaml +++ b/network/config/single-nic-vlans/cinder-storage.yaml @@ -56,6 +56,14 @@ parameters: ControlPlaneDefaultRoute: # Override this via parameter_defaults description: The default route of the control plane network. type: string + ExternalInterfaceDefaultRoute: # Not used by default in this template + default: '10.0.0.1' + description: The default route of the external network. + type: string + ManagementInterfaceDefaultRoute: # Commented out by default in this template + default: unset + description: The default route of the management network. + type: string DnsServers: # Override this via parameter_defaults default: [] description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf. @@ -116,12 +124,18 @@ resources: - ip_netmask: {get_param: StorageMgmtIpSubnet} # Uncomment when including environments/network-management.yaml + # If setting default route on the Management interface, comment + # out the default route on the Control Plane. #- # type: vlan # vlan_id: {get_param: ManagementNetworkVlanID} # addresses: # - # ip_netmask: {get_param: ManagementIpSubnet} + # routes: + # - + # default: true + # next_hop: {get_param: ManagementInterfaceDefaultRoute} outputs: OS::stack_id: diff --git a/network/config/single-nic-vlans/compute.yaml b/network/config/single-nic-vlans/compute.yaml index 8cf6825d..bd3cef34 100644 --- a/network/config/single-nic-vlans/compute.yaml +++ b/network/config/single-nic-vlans/compute.yaml @@ -56,6 +56,14 @@ parameters: ControlPlaneDefaultRoute: # Override this via parameter_defaults description: The default route of the control plane network. type: string + ExternalInterfaceDefaultRoute: # Not used by default in this template + default: '10.0.0.1' + description: The default route of the external network. + type: string + ManagementInterfaceDefaultRoute: # Commented out by default in this template + default: unset + description: The default route of the management network. + type: string DnsServers: # Override this via parameter_defaults default: [] description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf. @@ -116,12 +124,18 @@ resources: - ip_netmask: {get_param: TenantIpSubnet} # Uncomment when including environments/network-management.yaml + # If setting default route on the Management interface, comment + # out the default route on the Control Plane. #- # type: vlan # vlan_id: {get_param: ManagementNetworkVlanID} # addresses: # - # ip_netmask: {get_param: ManagementIpSubnet} + # routes: + # - + # default: true + # next_hop: {get_param: ManagementInterfaceDefaultRoute} outputs: OS::stack_id: diff --git a/network/config/single-nic-vlans/controller-no-external.yaml b/network/config/single-nic-vlans/controller-no-external.yaml index eb5e1e5a..8e8b0f5d 100644 --- a/network/config/single-nic-vlans/controller-no-external.yaml +++ b/network/config/single-nic-vlans/controller-no-external.yaml @@ -5,6 +5,10 @@ description: > controller role. No external IP is configured. parameters: + ControlPlaneIp: + default: '' + description: IP address/subnet on the ctlplane network + type: string ExternalIpSubnet: default: '' description: IP address/subnet on the external network @@ -53,10 +57,28 @@ parameters: default: 60 description: Vlan ID for the management network traffic. type: number + ControlPlaneDefaultRoute: # Override this via parameter_defaults + description: The default route of the control plane network. + type: string ExternalInterfaceDefaultRoute: default: '10.0.0.1' description: default route for the external network type: string + ManagementInterfaceDefaultRoute: # Commented out by default in this template + default: unset + description: The default route of the management network. + type: string + ControlPlaneSubnetCidr: # Override this via parameter_defaults + default: '24' + description: The subnet CIDR of the control plane network. + type: string + DnsServers: # Override this via parameter_defaults + default: [] + description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf. + type: comma_delimited_list + EC2MetadataIp: # Override this via parameter_defaults + description: The IP address of the EC2 metadata server. + type: string resources: OsNetConfigImpl: @@ -69,7 +91,22 @@ resources: - type: ovs_bridge name: {get_input: bridge_name} - use_dhcp: true + use_dhcp: false + dns_servers: {get_param: DnsServers} + addresses: + - + ip_netmask: + list_join: + - '/' + - - {get_param: ControlPlaneIp} + - {get_param: ControlPlaneSubnetCidr} + routes: + - + ip_netmask: 169.254.169.254/32 + next_hop: {get_param: EC2MetadataIp} + - + default: true + next_hop: {get_param: ControlPlaneDefaultRoute} members: - type: interface @@ -101,12 +138,18 @@ resources: - ip_netmask: {get_param: TenantIpSubnet} # Uncomment when including environments/network-management.yaml + # If setting default route on the Management interface, comment + # out the default route on the Control Plane. #- # type: vlan # vlan_id: {get_param: ManagementNetworkVlanID} # addresses: # - # ip_netmask: {get_param: ManagementIpSubnet} + # routes: + # - + # default: true + # next_hop: {get_param: ManagementInterfaceDefaultRoute} outputs: OS::stack_id: diff --git a/network/config/single-nic-vlans/controller-v6.yaml b/network/config/single-nic-vlans/controller-v6.yaml index 472e539d..ecbf2efb 100644 --- a/network/config/single-nic-vlans/controller-v6.yaml +++ b/network/config/single-nic-vlans/controller-v6.yaml @@ -59,10 +59,6 @@ parameters: default: 60 description: Vlan ID for the management network traffic. type: number - ExternalInterfaceDefaultRoute: - default: '10.0.0.1' - description: default route for the external network - type: string ControlPlaneSubnetCidr: # Override this via parameter_defaults default: '24' description: The subnet CIDR of the control plane network. @@ -70,6 +66,14 @@ parameters: ControlPlaneDefaultRoute: # Override this via parameter_defaults description: The default route of the control plane network. type: string + ExternalInterfaceDefaultRoute: + default: '10.0.0.1' + description: default route for the external network + type: string + ManagementInterfaceDefaultRoute: # Commented out by default in this template + default: unset + description: The default route of the management network. + type: string DnsServers: # Override this via parameter_defaults default: [] description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf. @@ -102,6 +106,7 @@ resources: - ip_netmask: 169.254.169.254/32 next_hop: {get_param: EC2MetadataIp} + # IPv4 Default Route - default: true next_hop: {get_param: ControlPlaneDefaultRoute} @@ -115,9 +120,10 @@ resources: type: vlan vlan_id: {get_param: ExternalNetworkVlanID} addresses: - - - ip_netmask: {get_param: ExternalIpSubnet} + - + ip_netmask: {get_param: ExternalIpSubnet} routes: + # IPv6 Default Route - default: true next_hop: {get_param: ExternalInterfaceDefaultRoute} @@ -145,12 +151,20 @@ resources: addresses: - ip_netmask: {get_param: TenantIpSubnet} - #- # Uncomment when including environments/network-management.yaml + # Uncomment when including environments/network-management.yaml + # If setting default route on the Management interface, comment + # out the default route on the External interface. This will + # make the External API unreachable from remote subnets. + #- # type: vlan # vlan_id: {get_param: ManagementNetworkVlanID} # addresses: # - # ip_netmask: {get_param: ManagementIpSubnet} + # routes: + # - + # default: true + # next_hop: {get_param: ManagementInterfaceDefaultRoute} outputs: OS::stack_id: diff --git a/network/config/single-nic-vlans/controller.yaml b/network/config/single-nic-vlans/controller.yaml index a5a0745d..c5979a89 100644 --- a/network/config/single-nic-vlans/controller.yaml +++ b/network/config/single-nic-vlans/controller.yaml @@ -57,10 +57,17 @@ parameters: default: 60 description: Vlan ID for the management network traffic. type: number + ControlPlaneDefaultRoute: # Override this via parameter_defaults + description: The default route of the control plane network. + type: string ExternalInterfaceDefaultRoute: default: '10.0.0.1' description: default route for the external network type: string + ManagementInterfaceDefaultRoute: # Commented out by default in this template + default: unset + description: The default route of the management network. + type: string ControlPlaneSubnetCidr: # Override this via parameter_defaults default: '24' description: The subnet CIDR of the control plane network. @@ -137,12 +144,20 @@ resources: addresses: - ip_netmask: {get_param: TenantIpSubnet} - #- # Uncomment when including environments/network-management.yaml + # Uncomment when including environments/network-management.yaml + # If setting default route on the Management interface, comment + # out the default route on the External interface. This will + # make the External API unreachable from remote subnets. + #- # type: vlan # vlan_id: {get_param: ManagementNetworkVlanID} # addresses: # - # ip_netmask: {get_param: ManagementIpSubnet} + # routes: + # - + # default: true + # next_hop: {get_param: ManagementInterfaceDefaultRoute} outputs: OS::stack_id: diff --git a/network/config/single-nic-vlans/swift-storage.yaml b/network/config/single-nic-vlans/swift-storage.yaml index efc03393..7b06580c 100644 --- a/network/config/single-nic-vlans/swift-storage.yaml +++ b/network/config/single-nic-vlans/swift-storage.yaml @@ -56,6 +56,14 @@ parameters: ControlPlaneDefaultRoute: # Override this via parameter_defaults description: The default route of the control plane network. type: string + ExternalInterfaceDefaultRoute: # Not used by default in this template + default: '10.0.0.1' + description: The default route of the external network. + type: string + ManagementInterfaceDefaultRoute: # Commented out by default in this template + default: unset + description: The default route of the management network. + type: string DnsServers: # Override this via parameter_defaults default: [] description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf. @@ -116,12 +124,18 @@ resources: - ip_netmask: {get_param: StorageMgmtIpSubnet} # Uncomment when including environments/network-management.yaml + # If setting default route on the Management interface, comment + # out the default route on the Control Plane. #- # type: vlan # vlan_id: {get_param: ManagementNetworkVlanID} # addresses: # - # ip_netmask: {get_param: ManagementIpSubnet} + # routes: + # - + # default: true + # next_hop: {get_param: ManagementInterfaceDefaultRoute} outputs: OS::stack_id: |