diff options
Diffstat (limited to 'environments')
50 files changed, 1166 insertions, 110 deletions
diff --git a/environments/cinder-dellsc-config.yaml b/environments/cinder-dellsc-config.yaml index 99e517bf..681a2fe9 100644 --- a/environments/cinder-dellsc-config.yaml +++ b/environments/cinder-dellsc-config.yaml @@ -19,3 +19,4 @@ parameter_defaults: CinderDellScSecondarySanLogin: 'Admin' CinderDellScSecondarySanPassword: '' CinderDellScSecondaryScApiPort: 3033 + CinderDellScExcludedDomainIp: '' diff --git a/environments/cinder-netapp-config.yaml b/environments/cinder-netapp-config.yaml index dfd15893..83ecbbe4 100644 --- a/environments/cinder-netapp-config.yaml +++ b/environments/cinder-netapp-config.yaml @@ -1,3 +1,7 @@ +# ************************************************************************************* +# DEPRECATED: Use tripleo-heat-templates/environments/storage/cinder-netapp-config.yaml +# instead. +# ************************************************************************************* # A Heat environment file which can be used to enable a # a Cinder NetApp backend, configured via puppet resource_registry: diff --git a/environments/docker-services-tls-everywhere.yaml b/environments/docker-services-tls-everywhere.yaml index e37f2515..3ca04697 100644 --- a/environments/docker-services-tls-everywhere.yaml +++ b/environments/docker-services-tls-everywhere.yaml @@ -35,13 +35,11 @@ resource_registry: OS::TripleO::PostDeploySteps: ../docker/post.yaml OS::TripleO::PostUpgradeSteps: ../docker/post-upgrade.yaml - OS::TripleO::Services: ../docker/services/services.yaml - parameter_defaults: - # Defaults to 'tripleoupstream'. Specify a local docker registry - # Example: 192.168.24.1:8787/tripleoupstream - DockerNamespace: tripleoupstream - DockerNamespaceIsRegistry: false + # To specify a local docker registry, enable these + # where 192.168.24.1 is the host running docker-distribution + #DockerNamespace: 192.168.24.1:8787/tripleoupstream + #DockerNamespaceIsRegistry: true ComputeServices: - OS::TripleO::Services::CACerts @@ -50,3 +48,4 @@ parameter_defaults: - OS::TripleO::Services::NovaLibvirt - OS::TripleO::Services::ComputeNeutronOvsAgent - OS::TripleO::Services::Docker + - OS::TripleO::Services::Sshd diff --git a/environments/docker.yaml b/environments/docker.yaml index cbd5b687..03713e83 100644 --- a/environments/docker.yaml +++ b/environments/docker.yaml @@ -2,10 +2,11 @@ resource_registry: # This can be used when you don't want to run puppet on the host, # e.g atomic, but it has been replaced with OS::TripleO::Services::Docker # OS::TripleO::NodeUserData: ../docker/firstboot/setup_docker_host.yaml - OS::TripleO::Services::Docker: ../puppet/services/docker.yaml # The compute node still needs extra initialization steps OS::TripleO::Compute::NodeUserData: ../docker/firstboot/setup_docker_host.yaml + OS::TripleO::Services::Docker: ../puppet/services/docker.yaml + #NOTE (dprince) add roles to be docker enabled as we support them OS::TripleO::Services::NovaLibvirt: ../docker/services/nova-libvirt.yaml OS::TripleO::Services::ComputeNeutronOvsAgent: ../docker/services/neutron-ovs-agent.yaml @@ -18,7 +19,9 @@ resource_registry: OS::TripleO::Services::NovaApi: ../docker/services/nova-api.yaml OS::TripleO::Services::NovaPlacement: ../docker/services/nova-placement.yaml OS::TripleO::Services::NovaConductor: ../docker/services/nova-conductor.yaml + OS::TripleO::Services::NovaConsoleauth: ../docker/services/nova-consoleauth.yaml OS::TripleO::Services::NovaScheduler: ../docker/services/nova-scheduler.yaml + OS::TripleO::Services::NovaVncProxy: ../docker/services/nova-vnc-proxy.yaml OS::TripleO::Services::NeutronServer: ../docker/services/neutron-api.yaml OS::TripleO::Services::NeutronApi: ../docker/services/neutron-api.yaml OS::TripleO::Services::NeutronCorePlugin: ../docker/services/neutron-plugin-ml2.yaml @@ -27,6 +30,7 @@ resource_registry: OS::TripleO::Services::NeutronDhcpAgent: ../docker/services/neutron-dhcp.yaml OS::TripleO::Services::NeutronL3Agent: ../docker/services/neutron-l3.yaml OS::TripleO::Services::MySQL: ../docker/services/database/mysql.yaml + OS::TripleO::Services::MySQLClient: ../docker/services/database/mysql-client.yaml OS::TripleO::Services::RabbitMQ: ../docker/services/rabbitmq.yaml OS::TripleO::Services::MongoDb: ../docker/services/database/mongodb.yaml OS::TripleO::Services::Redis: ../docker/services/database/redis.yaml @@ -43,14 +47,21 @@ resource_registry: OS::TripleO::Services::AodhListener: ../docker/services/aodh-listener.yaml OS::TripleO::Services::PankoApi: ../docker/services/panko-api.yaml OS::TripleO::Services::CeilometerAgentCentral: ../docker/services/ceilometer-agent-central.yaml + OS::TripleO::Services::CeilometerAgentIpmi: ../docker/services/ceilometer-agent-ipmi.yaml OS::TripleO::Services::CeilometerAgentCompute: ../docker/services/ceilometer-agent-compute.yaml OS::TripleO::Services::CeilometerAgentNotification: ../docker/services/ceilometer-agent-notification.yaml + OS::TripleO::Services::Horizon: ../docker/services/horizon.yaml + OS::TripleO::Services::Iscsid: ../docker/services/iscsid.yaml + OS::TripleO::Services::Multipathd: ../docker/services/multipathd.yaml + # FIXME: Had to remove these to unblock containers CI. They should be put back when fixed. + # OS::TripleO::Services::CinderApi: ../docker/services/cinder-api.yaml + # OS::TripleO::Services::CinderScheduler: ../docker/services/cinder-scheduler.yaml + # OS::TripleO::Services::CinderBackup: ../docker/services/cinder-backup.yaml + # OS::TripleO::Services::CinderVolume: ../docker/services/cinder-volume.yaml OS::TripleO::PostDeploySteps: ../docker/post.yaml OS::TripleO::PostUpgradeSteps: ../docker/post-upgrade.yaml - OS::TripleO::Services: ../docker/services/services.yaml - parameter_defaults: # To specify a local docker registry, enable these # where 192.168.24.1 is the host running docker-distribution @@ -63,3 +74,4 @@ parameter_defaults: - OS::TripleO::Services::ComputeNeutronOvsAgent - OS::TripleO::Services::Docker - OS::TripleO::Services::CeilometerAgentCompute + - OS::TripleO::Services::Sshd diff --git a/environments/enable-tls.yaml b/environments/enable-tls.yaml index 39ded654..175e1fd7 100644 --- a/environments/enable-tls.yaml +++ b/environments/enable-tls.yaml @@ -1,7 +1,11 @@ +# ******************************************************************************** +# DEPRECATED: Use tripleo-heat-templates/environments/ssl/enable-tls.yaml instead. +# ******************************************************************************** # Use this environment to pass in certificates for SSL deployments. # For these values to take effect, one of the tls-endpoints-*.yaml environments # must also be used. parameter_defaults: + HorizonSecureCookies: True SSLCertificate: | The contents of your certificate go here SSLIntermediateCertificate: '' diff --git a/environments/host-config-and-reboot.j2.yaml b/environments/host-config-and-reboot.j2.yaml new file mode 100644 index 00000000..d5f69ec5 --- /dev/null +++ b/environments/host-config-and-reboot.j2.yaml @@ -0,0 +1,18 @@ +resource_registry: +{% for role in roles %} + OS::TripleO::{{role.name}}::PreNetworkConfig: ../extraconfig/pre_network/host_config_and_reboot.yaml +{% endfor %} + +#parameter_defaults: + # Note: There are no global parameters which can be applied to all roles as + # these configuration have to be specific to role. + + # Sample parameters for Compute and ComputeOvsDpdk roles + #ComputeParameters: + #KernelArgs: "" + #TunedProfileName: "" + #HostIsolatedCoreList: "" + #ComputeOvsDpdkParameters: + #KernelArgs: "" + #TunedProfileName: "" + #HostIsolatedCoreList: "" diff --git a/environments/host-config-pre-network.j2.yaml b/environments/host-config-pre-network.j2.yaml deleted file mode 100644 index c79e28b4..00000000 --- a/environments/host-config-pre-network.j2.yaml +++ /dev/null @@ -1,16 +0,0 @@ -resource_registry: -# Create the registry only for roles with the word "Compute" in it. Like ComputeOvsDpdk, ComputeSriov, etc., -{%- for role in roles -%} -{% if "Compute" in role.name %} - OS::TripleO::{{role.name}}::PreNetworkConfig: ../extraconfig/pre_network/{{role.name.lower()}}-host_config_and_reboot.yaml -{%- endif -%} -{% endfor %} - -#parameter_defaults: - # Sample parameters for Compute and ComputeOvsDpdk roles - #ComputeKernelArgs: "" - #ComputeTunedProfileName: "" - #ComputeHostCpuList: "" - #ComputeOvsDpdkKernelArgs: "" - #ComputeOvsDpdkTunedProfileName: "" - #ComputeOvsDpdkHostCpuList: "" diff --git a/environments/hyperconverged-ceph.yaml b/environments/hyperconverged-ceph.yaml index 6fd71013..05a3a391 100644 --- a/environments/hyperconverged-ceph.yaml +++ b/environments/hyperconverged-ceph.yaml @@ -19,6 +19,7 @@ parameter_defaults: - OS::TripleO::Services::Kernel - OS::TripleO::Services::ComputeNeutronCorePlugin - OS::TripleO::Services::ComputeNeutronOvsAgent + - OS::TripleO::Services::NeutronLinuxbridgeAgent - OS::TripleO::Services::ComputeCeilometerAgent - OS::TripleO::Services::ComputeNeutronL3Agent - OS::TripleO::Services::ComputeNeutronMetadataAgent @@ -35,3 +36,4 @@ parameter_defaults: - OS::TripleO::Services::NeutronVppAgent - OS::TripleO::Services::MySQLClient - OS::TripleO::Services::Docker + - OS::TripleO::Services::Iscsid diff --git a/environments/inject-trust-anchor-hiera.yaml b/environments/inject-trust-anchor-hiera.yaml index b4908c1b..95d2de95 100644 --- a/environments/inject-trust-anchor-hiera.yaml +++ b/environments/inject-trust-anchor-hiera.yaml @@ -1,3 +1,7 @@ +# ************************************************************************************** +# DEPRECATED: Use tripleo-heat-templates/environments/ssl/inject-trust-anchor-hiera.yaml +# instead. +# ************************************************************************************** parameter_defaults: CAMap: first-ca-name: diff --git a/environments/inject-trust-anchor.yaml b/environments/inject-trust-anchor.yaml index 3ecb0d27..1b0f7066 100644 --- a/environments/inject-trust-anchor.yaml +++ b/environments/inject-trust-anchor.yaml @@ -1,3 +1,7 @@ +# ******************************************************************************** +# DEPRECATED: Use tripleo-heat-templates/environments/ssl/inject-trust-anchor.yaml +# instead. +# ******************************************************************************** parameter_defaults: SSLRootCertificate: | The contents of your root CA certificate go here diff --git a/environments/network-isolation.j2.yaml b/environments/network-isolation.j2.yaml new file mode 100644 index 00000000..6a7318fc --- /dev/null +++ b/environments/network-isolation.j2.yaml @@ -0,0 +1,37 @@ +{%- set primary_role = [roles[0]] -%} +{%- for role in roles -%} + {%- if 'primary' in role.tags and 'controller' in role.tags -%} + {%- set _ = primary_role.pop() -%} + {%- set _ = primary_role.append(role) -%} + {%- endif -%} +{%- endfor -%} +{%- set primary_role_name = primary_role[0].name -%} +# Enable the creation of Neutron networks for isolated Overcloud +# traffic and configure each role to assign ports (related +# to that role) on these networks. +# primary role is: {{primary_role_name}} +resource_registry: + # networks as defined in network_data.yaml + {%- for network in networks if network.enabled|default(true) %} + OS::TripleO::Network::{{network.name}}: ../network/{{network.name_lower|default(network.name.lower())}}.yaml + {%- endfor %} + + # Port assignments for the VIPs + {%- for network in networks if network.vip %} + OS::TripleO::Network::Ports::{{network.name}}VipPort: ../network/ports/{{network.name_lower|default(network.name.lower())}}.yaml + {%- endfor %} + OS::TripleO::Network::Ports::RedisVipPort: ../network/ports/vip.yaml + + + OS::TripleO::{{primary_role_name}}::Ports::RedisVipPort: ../network/ports/vip.yaml + +{%- for role in roles %} + # Port assignments for the {{role.name}} + {%- for network in networks %} + {%- if network.name in role.networks|default([]) and network.enabled|default(true) %} + OS::TripleO::{{role.name}}::Ports::{{network.name}}Port: ../network/ports/{{network.name_lower|default(network.name.lower())}}.yaml + {%- else %} + OS::TripleO::{{role.name}}::Ports::{{network.name}}Port: ../network/ports/noop.yaml + {%- endif %} + {%- endfor %} +{%- endfor %} diff --git a/environments/network-isolation.yaml b/environments/network-isolation.yaml deleted file mode 100644 index a6b4b8ae..00000000 --- a/environments/network-isolation.yaml +++ /dev/null @@ -1,59 +0,0 @@ -# Enable the creation of Neutron networks for isolated Overcloud -# traffic and configure each role to assign ports (related -# to that role) on these networks. -resource_registry: - OS::TripleO::Network::External: ../network/external.yaml - OS::TripleO::Network::InternalApi: ../network/internal_api.yaml - OS::TripleO::Network::StorageMgmt: ../network/storage_mgmt.yaml - OS::TripleO::Network::Storage: ../network/storage.yaml - OS::TripleO::Network::Tenant: ../network/tenant.yaml - # Management network is optional and disabled by default. - # To enable it, include environments/network-management.yaml - #OS::TripleO::Network::Management: ../network/management.yaml - - # Port assignments for the VIPs - OS::TripleO::Network::Ports::ExternalVipPort: ../network/ports/external.yaml - OS::TripleO::Network::Ports::InternalApiVipPort: ../network/ports/internal_api.yaml - OS::TripleO::Network::Ports::StorageVipPort: ../network/ports/storage.yaml - OS::TripleO::Network::Ports::StorageMgmtVipPort: ../network/ports/storage_mgmt.yaml - OS::TripleO::Network::Ports::RedisVipPort: ../network/ports/vip.yaml - - # Port assignments for the controller role - OS::TripleO::Controller::Ports::ExternalPort: ../network/ports/external.yaml - OS::TripleO::Controller::Ports::InternalApiPort: ../network/ports/internal_api.yaml - OS::TripleO::Controller::Ports::StoragePort: ../network/ports/storage.yaml - OS::TripleO::Controller::Ports::StorageMgmtPort: ../network/ports/storage_mgmt.yaml - OS::TripleO::Controller::Ports::TenantPort: ../network/ports/tenant.yaml - #OS::TripleO::Controller::Ports::ManagementPort: ../network/ports/management.yaml - - # Port assignments for the compute role - OS::TripleO::Compute::Ports::ExternalPort: ../network/ports/noop.yaml - OS::TripleO::Compute::Ports::InternalApiPort: ../network/ports/internal_api.yaml - OS::TripleO::Compute::Ports::StoragePort: ../network/ports/storage.yaml - OS::TripleO::Compute::Ports::StorageMgmtPort: ../network/ports/noop.yaml - OS::TripleO::Compute::Ports::TenantPort: ../network/ports/tenant.yaml - #OS::TripleO::Compute::Ports::ManagementPort: ../network/ports/management.yaml - - # Port assignments for the ceph storage role - OS::TripleO::CephStorage::Ports::ExternalPort: ../network/ports/noop.yaml - OS::TripleO::CephStorage::Ports::InternalApiPort: ../network/ports/noop.yaml - OS::TripleO::CephStorage::Ports::StoragePort: ../network/ports/storage.yaml - OS::TripleO::CephStorage::Ports::StorageMgmtPort: ../network/ports/storage_mgmt.yaml - OS::TripleO::CephStorage::Ports::TenantPort: ../network/ports/noop.yaml - #OS::TripleO::CephStorage::Ports::ManagementPort: ../network/ports/management.yaml - - # Port assignments for the swift storage role - OS::TripleO::SwiftStorage::Ports::ExternalPort: ../network/ports/noop.yaml - OS::TripleO::SwiftStorage::Ports::InternalApiPort: ../network/ports/internal_api.yaml - OS::TripleO::SwiftStorage::Ports::StoragePort: ../network/ports/storage.yaml - OS::TripleO::SwiftStorage::Ports::StorageMgmtPort: ../network/ports/storage_mgmt.yaml - OS::TripleO::SwiftStorage::Ports::TenantPort: ../network/ports/noop.yaml - #OS::TripleO::SwiftStorage::Ports::ManagementPort: ../network/ports/management.yaml - - # Port assignments for the block storage role - OS::TripleO::BlockStorage::Ports::ExternalPort: ../network/ports/noop.yaml - OS::TripleO::BlockStorage::Ports::InternalApiPort: ../network/ports/internal_api.yaml - OS::TripleO::BlockStorage::Ports::StoragePort: ../network/ports/storage.yaml - OS::TripleO::BlockStorage::Ports::StorageMgmtPort: ../network/ports/storage_mgmt.yaml - OS::TripleO::BlockStorage::Ports::TenantPort: ../network/ports/noop.yaml - #OS::TripleO::BlockStorage::Ports::ManagementPort: ../network/ports/management.yaml diff --git a/environments/networking/neutron-midonet.yaml b/environments/networking/neutron-midonet.yaml new file mode 100644 index 00000000..ad8da8cf --- /dev/null +++ b/environments/networking/neutron-midonet.yaml @@ -0,0 +1,66 @@ +# ******************************************************************* +# This file was created automatically by the sample environment +# generator. Developers should use `tox -e genconfig` to update it. +# Users are recommended to make changes to a copy of the file instead +# of the original, if any customizations are needed. +# ******************************************************************* +# title: Enable the Neutron MidoNet Services +# description: | +# A Heat environment that can be used to deploy MidoNet Services +parameter_defaults: + # Native Transport Port + # Type: string + CassandraClientPort: 9042 + + # The port for the Thrift RPC service, which is used for client connections + # Type: string + CassandraClientPortThrift: 9160 + + # The SSL port for encrypted communication. Unused unless enabled in encryption_options + # Type: string + CassandraSslStoragePort: 7001 + + # The Cassandra port for inter-node communication + # Type: string + CassandraStoragePort: 7000 + + # Name of the tunnel zone used to tunnel packages + # Type: string + TunnelZoneName: tunnelzone_tripleo + + # Type of the tunnels on the overlay. Choose between `gre` and `vxlan` + # Type: string + TunnelZoneType: vxlan + + # ****************************************************** + # Static parameters - these are values that must be + # included in the environment but should not be changed. + # ****************************************************** + # Whether enable Cassandra cluster on Controller + # Type: boolean + EnableCassandraOnController: True + + # Whether enable Zookeeper cluster on Controller + # Type: boolean + EnableZookeeperOnController: True + + # The core plugin for Neutron. The value should be the entrypoint to be loaded + # from neutron.core_plugins namespace. + # Type: string + NeutronCorePlugin: midonet.neutron.plugin_v1.MidonetPluginV2 + + # If True, DHCP provide metadata route to VM. + # Type: boolean + NeutronEnableIsolatedMetadata: True + + # ********************* + # End static parameters + # ********************* +resource_registry: + OS::TripleO::AllNodesExtraConfig: ../../puppet/extraconfig/all_nodes/neutron-midonet-all-nodes.yaml + OS::TripleO::Controller::Net::SoftwareConfig: ../../net-config-linux-bridge.yaml + OS::TripleO::Services::ComputeNeutronCorePlugin: ../../puppet/services/neutron-compute-plugin-midonet.yaml + OS::TripleO::Services::ComputeNeutronOvsAgent: OS::Heat::None + OS::TripleO::Services::NeutronCorePlugin: OS::TripleO::Services::NeutronCorePluginMidonet + OS::TripleO::Services::NeutronL3Agent: OS::Heat::None + OS::TripleO::Services::NeutronOvsAgent: OS::Heat::None diff --git a/environments/neutron-bgpvpn-opendaylight.yaml b/environments/neutron-bgpvpn-opendaylight.yaml new file mode 100644 index 00000000..1d2e0774 --- /dev/null +++ b/environments/neutron-bgpvpn-opendaylight.yaml @@ -0,0 +1,12 @@ +# A Heat environment file that can be used to deploy Neutron BGPVPN service +# +# This environment file deploys Neutron BGPVPN service and configures +# Opendaylight as its service provider. +# +# - OpenDaylight: BGPVPN:OpenDaylight:networking_bgpvpn.neutron.services.service_drivers.opendaylight.odl.OpenDaylightBgpvpnDriver:default +resource_registry: + OS::TripleO::Services::NeutronBgpVpnApi: ../puppet/services/neutron-bgpvpn-api.yaml + +parameter_defaults: + NeutronServicePlugins: 'router, networking_bgpvpn.neutron.services.plugin.BGPVPNPlugin' + BgpvpnServiceProvider: 'BGPVPN:OpenDaylight:networking_bgpvpn.neutron.services.service_drivers.opendaylight.odl.OpenDaylightBgpvpnDriver:default' diff --git a/environments/neutron-linuxbridge.yaml b/environments/neutron-linuxbridge.yaml new file mode 100644 index 00000000..c8045cc9 --- /dev/null +++ b/environments/neutron-linuxbridge.yaml @@ -0,0 +1,8 @@ +## A Heat environment that can be used to deploy linuxbridge +resource_registry: + OS::TripleO::Services::ComputeNeutronOvsAgent: OS::Heat::None + OS::TripleO::Services::NeutronOvsAgent: OS::Heat::None + OS::TripleO::Services::NeutronLinuxbridgeAgent: ../puppet/services/neutron-linuxbridge-agent.yaml + +parameter_defaults: + NeutronMechanismDrivers: ['linuxbridge'] diff --git a/environments/neutron-midonet.yaml b/environments/neutron-midonet.yaml index c120d0b3..64cea2a6 100644 --- a/environments/neutron-midonet.yaml +++ b/environments/neutron-midonet.yaml @@ -1,3 +1,7 @@ +# ****************************************************************************** +# DEPRECATED: Use tripleo-heat-templates/environments/networking/neutron-midonet +# instead. +# ****************************************************************************** # A Heat environment that can be used to deploy MidoNet Services resource_registry: OS::TripleO::AllNodesExtraConfig: ../puppet/extraconfig/all_nodes/neutron-midonet-all-nodes.yaml diff --git a/environments/neutron-ml2-ovn-ha.yaml b/environments/neutron-ml2-ovn-ha.yaml new file mode 100644 index 00000000..c592d576 --- /dev/null +++ b/environments/neutron-ml2-ovn-ha.yaml @@ -0,0 +1,24 @@ +# A Heat environment file which can be used to enable OVN +# extensions, configured via puppet +resource_registry: + OS::TripleO::Services::NeutronCorePlugin: OS::TripleO::Services::NeutronCorePluginML2OVN + OS::TripleO::Services::ComputeNeutronCorePlugin: ../puppet/services/neutron-compute-plugin-ovn.yaml + OS::TripleO::Services::OVNDBs: ../puppet/services/pacemaker/ovn-dbs.yaml +# Disabling Neutron services that overlap with OVN + OS::TripleO::Services::NeutronL3Agent: OS::Heat::None + OS::TripleO::Services::NeutronOvsAgent: OS::Heat::None + OS::TripleO::Services::NeutronMetadataAgent: OS::Heat::None + OS::TripleO::Services::NeutronDhcpAgent: OS::Heat::None + OS::TripleO::Services::ComputeNeutronOvsAgent: OS::Heat::None + +parameter_defaults: + NeutronMechanismDrivers: ovn + OVNVifType: ovs + OVNNeutronSyncMode: log + OVNQosDriver: ovn-qos + OVNTunnelEncapType: geneve + NeutronEnableDHCPAgent: false + NeutronTypeDrivers: 'geneve,vxlan,vlan,flat' + NeutronNetworkType: 'geneve' + NeutronServicePlugins: 'qos,ovn-router' + NeutronVniRanges: ['1:65536', ] diff --git a/environments/neutron-opendaylight-dpdk.yaml b/environments/neutron-opendaylight-dpdk.yaml new file mode 100644 index 00000000..9ee4eb7e --- /dev/null +++ b/environments/neutron-opendaylight-dpdk.yaml @@ -0,0 +1,37 @@ +# A Heat environment that can be used to deploy OpenDaylight with L3 DVR and DPDK +resource_registry: + OS::TripleO::Services::NeutronOvsAgent: OS::Heat::None + OS::TripleO::Services::ComputeNeutronOvsAgent: OS::Heat::None + OS::TripleO::Services::ComputeNeutronCorePlugin: OS::Heat::None + OS::TripleO::Services::OpenDaylightApi: ../puppet/services/opendaylight-api.yaml + OS::TripleO::Services::OpenDaylightOvs: ../puppet/services/opendaylight-ovs.yaml + OS::TripleO::Services::NeutronL3Agent: OS::Heat::None + +parameter_defaults: + NeutronEnableForceMetadata: true + NeutronMechanismDrivers: 'opendaylight_v2' + NeutronServicePlugins: 'odl-router_v2' + NovaSchedulerDefaultFilters: "RamFilter,ComputeFilter,AvailabilityZoneFilter,ComputeCapabilitiesFilter,ImagePropertiesFilter,NUMATopologyFilter" + ## Deploying DPDK requires enabling hugepages for the overcloud compute nodes. + ## It also requires enabling IOMMU when using the VFIO (vfio-pci) OvsDpdkDriverType. + ## This can be done using ComputeKernelArgs as shown below. + ComputeParameters: + #ComputeKernelArgs: "intel_iommu=on default_hugepagesz=2MB hugepagesz=2MB hugepages=2048" + ## Attempting to deploy DPDK without appropriate values for the below parameters may lead to unstable deployments + ## due to CPU contention of DPDK PMD threads. + OvsEnableDpdk: True + ## It is highly recommended to to enable isolcpus (via ComputeKernelArgs) on compute overcloud nodes and set the following parameters: + #OvsDpdkSocketMemory: "" # Sets the amount of hugepage memory to assign per NUMA node. + # It is recommended to use the socket closest to the PCIe slot used for the + # desired DPDK NIC. Format should be comma separated per socket string such as: + # "<socket 0 mem MB>,<socket 1 mem MB>", for example: "1024,0". + #OvsDpdkDriverType: "vfio-pci" # Ensure the Overcloud NIC to be used for DPDK supports this UIO/PMD driver. + #OvsPmdCoreList: "" # List or range of CPU cores for PMD threads to be pinned to. Note, NIC + # location to cores on socket, number of hyper-threaded logical cores, and + # desired number of PMD threads can all play a role in configuring this setting. + # These cores should be on the same socket where OvsDpdkSocketMemory is assigned. + # If using hyperthreading then specify both logical cores that would equal the + # physical core. Also, specifying more than one core will trigger multiple PMD + # threads to be spawned, which may improve dataplane performance. + #NovaVcpuPinSet: "" # Cores to pin Nova instances to. For maximum performance, select cores + # on the same NUMA node(s) selected for previous settings. diff --git a/environments/neutron-ovs-dpdk.yaml b/environments/neutron-ovs-dpdk.yaml index 004b8ac0..ecfd0fea 100644 --- a/environments/neutron-ovs-dpdk.yaml +++ b/environments/neutron-ovs-dpdk.yaml @@ -1,18 +1,31 @@ -## A Heat environment that can be used to deploy DPDK with OVS +# A Heat environment that can be used to deploy DPDK with OVS +# Deploying DPDK requires enabling hugepages for the overcloud nodes resource_registry: OS::TripleO::Services::ComputeNeutronOvsAgent: ../puppet/services/neutron-ovs-dpdk-agent.yaml parameter_defaults: - ## NeutronDpdkCoreList and NeutronDpdkMemoryChannels are REQUIRED settings. - ## Attempting to deploy DPDK without appropriate values will cause deployment to fail or lead to unstable deployments. - #NeutronDpdkCoreList: "" - #NeutronDpdkMemoryChannels: "" - NeutronDatapathType: "netdev" - NeutronVhostuserSocketDir: "/var/run/openvswitch" - - #NeutronDpdkSocketMemory: "" - #NeutronDpdkDriverType: "vfio-pci" - #NovaReservedHostMemory: 4096 - #NovaVcpuPinSet: "" - + NeutronVhostuserSocketDir: "/var/lib/vhost_sockets" + NovaSchedulerDefaultFilters: "RamFilter,ComputeFilter,AvailabilityZoneFilter,ComputeCapabilitiesFilter,ImagePropertiesFilter,NUMATopologyFilter" + ## Deploying DPDK requires enabling hugepages for the overcloud compute nodes. + ## It also requires enabling IOMMU when using the VFIO (vfio-pci) OvsDpdkDriverType. + ## This can be done using ComputeKernelArgs as shown below. + #ComputeParameters: + #ComputeKernelArgs: "intel_iommu=on default_hugepagesz=2MB hugepagesz=2MB hugepages=2048" + ## Attempting to deploy DPDK without appropriate values for the below parameters may lead to unstable deployments + ## due to CPU contention of DPDK PMD threads. + ## It is highly recommended to to enable isolcpus (via ComputeKernelArgs) on compute overcloud nodes and set the following parameters: + #OvsDpdkSocketMemory: "" # Sets the amount of hugepage memory to assign per NUMA node. + # It is recommended to use the socket closest to the PCIe slot used for the + # desired DPDK NIC. Format should be comma separated per socket string such as: + # "<socket 0 mem MB>,<socket 1 mem MB>", for example: "1024,0". + #OvsDpdkDriverType: "vfio-pci" # Ensure the Overcloud NIC to be used for DPDK supports this UIO/PMD driver. + #OvsPmdCoreList: "" # List or range of CPU cores for PMD threads to be pinned to. Note, NIC + # location to cores on socket, number of hyper-threaded logical cores, and + # desired number of PMD threads can all play a role in configuring this setting. + # These cores should be on the same socket where OvsDpdkSocketMemory is assigned. + # If using hyperthreading then specify both logical cores that would equal the + # physical core. Also, specifying more than one core will trigger multiple PMD + # threads to be spawned, which may improve dataplane performance. + #NovaVcpuPinSet: "" # Cores to pin Nova instances to. For maximum performance, select cores + # on the same NUMA node(s) selected for previous settings. diff --git a/environments/nonha-arch.yaml b/environments/nonha-arch.yaml new file mode 100644 index 00000000..7fdcc100 --- /dev/null +++ b/environments/nonha-arch.yaml @@ -0,0 +1,16 @@ +# An environment which creates an Overcloud without the use of pacemaker +# (i.e. only with keepalived and systemd for all resources) +resource_registry: + OS::TripleO::Tasks::ControllerPreConfig: OS::Heat::None + OS::TripleO::Tasks::ControllerPostConfig: OS::Heat::None + OS::TripleO::Tasks::ControllerPostPuppetRestart: OS::Heat::None + + OS::TripleO::Services::CinderVolume: ../puppet/services/cinder-volume.yaml + OS::TripleO::Services::RabbitMQ: ../puppet/services/rabbitmq.yaml + OS::TripleO::Services::HAproxy: ../puppet/services/haproxy.yaml + OS::TripleO::Services::Redis: ../puppet/services/database/redis.yaml + OS::TripleO::Services::MySQL: ../puppet/services/database/mysql.yaml + OS::TripleO::Services::Keepalived: OS::Heat::None + OS::TripleO::Services::Pacemaker: OS::Heat::None + OS::TripleO::Services::PacemakerRemote: OS::Heat::None + diff --git a/environments/overcloud-baremetal.j2.yaml b/environments/overcloud-baremetal.j2.yaml new file mode 100644 index 00000000..668e28de --- /dev/null +++ b/environments/overcloud-baremetal.j2.yaml @@ -0,0 +1,19 @@ +resource_registry: + OS::TripleO::AllNodes::SoftwareConfig: OS::Heat::None + OS::TripleO::PostDeploySteps: OS::Heat::None + OS::TripleO::DefaultPasswords: OS::Heat::None + OS::TripleO::RandomString: OS::Heat::None + OS::TripleO::AllNodesDeployment: OS::Heat::None + +parameter_defaults: + # Deploy no services +{% for role in roles %} + {{role.name}}Services: [] +{% endfor %} + + # Consistent Hostname format + ControllerHostnameFormat: overcloud-controller-%index% + ComputeHostnameFormat: overcloud-novacompute-%index% + ObjectStorageHostnameFormat: overcloud-objectstorage-%index% + CephStorageHostnameFormat: overcloud-cephstorage-%index% + BlockStorageHostnameFormat: overcloud-blockstorage-%index% diff --git a/environments/overcloud-services.yaml b/environments/overcloud-services.yaml new file mode 100644 index 00000000..c409b899 --- /dev/null +++ b/environments/overcloud-services.yaml @@ -0,0 +1,7 @@ +parameter_defaults: + # Consistent Hostname format + ControllerDeployedServerHostnameFormat: overcloud-controller-%index% + ComputeDeployedServerHostnameFormat: overcloud-novacompute-%index% + ObjectStorageDeployedServerHostnameFormat: overcloud-objectstorage-%index% + CephStorageDeployedServerHostnameFormat: overcloud-cephstorage-%index% + BlockStorageDeployedServerHostnameFormat: overcloud-blockstorage-%index% diff --git a/environments/predictable-placement/custom-hostnames.yaml b/environments/predictable-placement/custom-hostnames.yaml new file mode 100644 index 00000000..0d9d520b --- /dev/null +++ b/environments/predictable-placement/custom-hostnames.yaml @@ -0,0 +1,33 @@ +# ******************************************************************* +# This file was created automatically by the sample environment +# generator. Developers should use `tox -e genconfig` to update it. +# Users are recommended to make changes to a copy of the file instead +# of the original, if any customizations are needed. +# ******************************************************************* +# title: Custom Hostnames +# description: | +# Hostname format for each role +# Note %index% is translated into the index of the node, e.g 0/1/2 etc +# and %stackname% is replaced with OS::stack_name in the template below. +# If you want to use the heat generated names, pass '' (empty string). +parameter_defaults: + # Format for BlockStorage node hostnames Note %index% is translated into the index of the node, e.g 0/1/2 etc and %stackname% is replaced with the stack name e.g overcloud + # Type: string + BlockStorageHostnameFormat: '%stackname%-blockstorage-%index%' + + # Format for CephStorage node hostnames Note %index% is translated into the index of the node, e.g 0/1/2 etc and %stackname% is replaced with the stack name e.g overcloud + # Type: string + CephStorageHostnameFormat: '%stackname%-cephstorage-%index%' + + # Format for Compute node hostnames Note %index% is translated into the index of the node, e.g 0/1/2 etc and %stackname% is replaced with the stack name e.g overcloud + # Type: string + ComputeHostnameFormat: '%stackname%-novacompute-%index%' + + # Format for Controller node hostnames Note %index% is translated into the index of the node, e.g 0/1/2 etc and %stackname% is replaced with the stack name e.g overcloud + # Type: string + ControllerHostnameFormat: '%stackname%-controller-%index%' + + # Format for ObjectStorage node hostnames Note %index% is translated into the index of the node, e.g 0/1/2 etc and %stackname% is replaced with the stack name e.g overcloud + # Type: string + ObjectStorageHostnameFormat: '%stackname%-objectstorage-%index%' + diff --git a/environments/puppet-ceph-devel.yaml b/environments/puppet-ceph-devel.yaml index 8fc4bf29..6a69914b 100644 --- a/environments/puppet-ceph-devel.yaml +++ b/environments/puppet-ceph-devel.yaml @@ -20,5 +20,5 @@ parameter_defaults: GlanceBackend: rbd GnocchiBackend: rbd CinderEnableIscsiBackend: false - CephPoolDefaultSite: 1 + CephPoolDefaultSize: 1 diff --git a/environments/puppet-ceph-external.yaml b/environments/puppet-ceph-external.yaml index 5f8b02ad..2f577c26 100644 --- a/environments/puppet-ceph-external.yaml +++ b/environments/puppet-ceph-external.yaml @@ -1,3 +1,7 @@ +# ****************************************************************************** +# DEPRECATED: Use tripleo-heat-templates/environments/storage/ceph-external.yaml +# instead. +# ****************************************************************************** # A Heat environment file which can be used to enable the # use of an externally managed Ceph cluster. resource_registry: diff --git a/environments/services-docker/collectd.yaml b/environments/services-docker/collectd.yaml new file mode 100644 index 00000000..1623a888 --- /dev/null +++ b/environments/services-docker/collectd.yaml @@ -0,0 +1,2 @@ +resource_registry: + OS::TripleO::Services::Collectd: ../../docker/services/collectd.yaml diff --git a/environments/services-docker/congress.yaml b/environments/services-docker/congress.yaml new file mode 100644 index 00000000..5d4c7307 --- /dev/null +++ b/environments/services-docker/congress.yaml @@ -0,0 +1,2 @@ +resource_registry: + OS::TripleO::Services::Congress: ../../docker/services/congress-api.yaml diff --git a/environments/services-docker/ec2-api.yaml b/environments/services-docker/ec2-api.yaml new file mode 100644 index 00000000..24cbb032 --- /dev/null +++ b/environments/services-docker/ec2-api.yaml @@ -0,0 +1,2 @@ +resource_registry: + OS::TripleO::Services::Ec2Api: ../../docker/services/ec2-api.yaml diff --git a/environments/services-docker/manila.yaml b/environments/services-docker/manila.yaml new file mode 100644 index 00000000..795309f6 --- /dev/null +++ b/environments/services-docker/manila.yaml @@ -0,0 +1,3 @@ +resource_registry: + OS::TripleO::Services::ManilaApi: ../../docker/services/manila-api.yaml + OS::TripleO::Services::ManilaScheduler: ../../docker/services/manila-scheduler.yaml diff --git a/environments/services-docker/octavia.yaml b/environments/services-docker/octavia.yaml new file mode 100644 index 00000000..b677a4f6 --- /dev/null +++ b/environments/services-docker/octavia.yaml @@ -0,0 +1,5 @@ +resource_registry: + OS::TripleO::Services::OctaviaApi: ../../docker/services/octavia-api.yaml + OS::TripleO::Services::OctaviaHousekeeping: ../../docker/services/octavia-housekeeping.yaml + OS::TripleO::Services::OctaviaHealthManager: ../../docker/services/octavia-health-manager.yaml + OS::TripleO::Services::OctaviaWorker: ../../docker/services/octavia-worker.yaml diff --git a/environments/services-docker/sahara.yaml b/environments/services-docker/sahara.yaml new file mode 100644 index 00000000..d0bf9fe1 --- /dev/null +++ b/environments/services-docker/sahara.yaml @@ -0,0 +1,3 @@ +resource_registry: + OS::TripleO::Services::SaharaApi: ../../docker/services/sahara-api.yaml + OS::TripleO::Services::SaharaEngine: ../../docker/services/sahara-engine.yaml diff --git a/environments/services-docker/sensu-client.yaml b/environments/services-docker/sensu-client.yaml new file mode 100644 index 00000000..c03104d2 --- /dev/null +++ b/environments/services-docker/sensu-client.yaml @@ -0,0 +1,3 @@ + +resource_registry: + OS::TripleO::Services::SensuClient: ../../docker/services/sensu-client.yaml diff --git a/environments/services-docker/tacker.yaml b/environments/services-docker/tacker.yaml new file mode 100644 index 00000000..cba8d6b9 --- /dev/null +++ b/environments/services-docker/tacker.yaml @@ -0,0 +1,2 @@ +resource_registry: + OS::TripleO::Services::Tacker: ../../docker/services/tacker.yaml diff --git a/environments/services-docker/undercloud-ceilometer.yaml b/environments/services-docker/undercloud-ceilometer.yaml index 07a61c20..ca55b4d9 100644 --- a/environments/services-docker/undercloud-ceilometer.yaml +++ b/environments/services-docker/undercloud-ceilometer.yaml @@ -1,3 +1,4 @@ resource_registry: OS::TripleO::Services::UndercloudCeilometerAgentCentral: ../../docker/services/ceilometer-agent-central.yaml OS::TripleO::Services::UndercloudCeilometerAgentNotification: ../../docker/services/ceilometer-agent-notification.yaml + OS::TripleO::Services::UndercloudCeilometerAgentIpmi: ../../docker/services/ceilometer-agent-ipmi.yaml diff --git a/environments/services/ironic.yaml b/environments/services/ironic.yaml index b1317382..b81b0269 100644 --- a/environments/services/ironic.yaml +++ b/environments/services/ironic.yaml @@ -1,5 +1,6 @@ resource_registry: OS::TripleO::Services::IronicApi: ../../puppet/services/ironic-api.yaml OS::TripleO::Services::IronicConductor: ../../puppet/services/ironic-conductor.yaml - OS::TripleO::Services::IronicPxe: ../../puppet/services/ironic-pxe.yaml OS::TripleO::Services::NovaIronic: ../../puppet/services/nova-ironic.yaml +parameter_defaults: + NovaSchedulerDiscoverHostsInCellsInterval: 15 diff --git a/environments/ssl/enable-tls.yaml b/environments/ssl/enable-tls.yaml new file mode 100644 index 00000000..c8ed2bd2 --- /dev/null +++ b/environments/ssl/enable-tls.yaml @@ -0,0 +1,41 @@ +# ******************************************************************* +# This file was created automatically by the sample environment +# generator. Developers should use `tox -e genconfig` to update it. +# Users are recommended to make changes to a copy of the file instead +# of the original, if any customizations are needed. +# ******************************************************************* +# title: Enable SSL on OpenStack Public Endpoints +# description: | +# Use this environment to pass in certificates for SSL deployments. +# For these values to take effect, one of the tls-endpoints-*.yaml environments +# must also be used. +parameter_defaults: + # The content of the SSL certificate (without Key) in PEM format. + # Mandatory. This parameter must be set by the user. + # Type: string + SSLCertificate: | + The contents of your certificate go here + + # The content of an SSL intermediate CA certificate in PEM format. + # Type: string + SSLIntermediateCertificate: '' + + # The content of the SSL Key in PEM format. + # Mandatory. This parameter must be set by the user. + # Type: string + SSLKey: | + The contents of the private key go here + + # ****************************************************** + # Static parameters - these are values that must be + # included in the environment but should not be changed. + # ****************************************************** + # The filepath of the certificate as it will be stored in the controller. + # Type: string + DeployedSSLCertificatePath: /etc/pki/tls/private/overcloud_endpoint.pem + + # ********************* + # End static parameters + # ********************* +resource_registry: + OS::TripleO::NodeTLSData: ../../puppet/extraconfig/tls/tls-cert-inject.yaml diff --git a/environments/ssl/inject-trust-anchor-hiera.yaml b/environments/ssl/inject-trust-anchor-hiera.yaml new file mode 100644 index 00000000..db3f2677 --- /dev/null +++ b/environments/ssl/inject-trust-anchor-hiera.yaml @@ -0,0 +1,22 @@ +# ******************************************************************* +# This file was created automatically by the sample environment +# generator. Developers should use `tox -e genconfig` to update it. +# Users are recommended to make changes to a copy of the file instead +# of the original, if any customizations are needed. +# ******************************************************************* +# title: Inject SSL Trust Anchor on Overcloud Nodes +# description: | +# When using an SSL certificate signed by a CA that is not in the default +# list of CAs, this environment allows adding a custom CA certificate to +# the overcloud nodes. +parameter_defaults: + # Map containing the CA certs and information needed for deploying them. + # Type: json + CAMap: + first-ca-name: + content: | + The content of the CA cert goes here + second-ca-name: + content: | + The content of the CA cert goes here + diff --git a/environments/ssl/inject-trust-anchor.yaml b/environments/ssl/inject-trust-anchor.yaml new file mode 100644 index 00000000..521a4191 --- /dev/null +++ b/environments/ssl/inject-trust-anchor.yaml @@ -0,0 +1,20 @@ +# ******************************************************************* +# This file was created automatically by the sample environment +# generator. Developers should use `tox -e genconfig` to update it. +# Users are recommended to make changes to a copy of the file instead +# of the original, if any customizations are needed. +# ******************************************************************* +# title: Inject SSL Trust Anchor on Overcloud Nodes +# description: | +# When using an SSL certificate signed by a CA that is not in the default +# list of CAs, this environment allows adding a custom CA certificate to +# the overcloud nodes. +parameter_defaults: + # The content of a CA's SSL certificate file in PEM format. This is evaluated on the client side. + # Mandatory. This parameter must be set by the user. + # Type: string + SSLRootCertificate: | + The contents of your certificate go here + +resource_registry: + OS::TripleO::NodeTLSCAData: ../../puppet/extraconfig/tls/ca-inject.yaml diff --git a/environments/ssl/tls-endpoints-public-dns.yaml b/environments/ssl/tls-endpoints-public-dns.yaml new file mode 100644 index 00000000..216afece --- /dev/null +++ b/environments/ssl/tls-endpoints-public-dns.yaml @@ -0,0 +1,131 @@ +# ******************************************************************* +# This file was created automatically by the sample environment +# generator. Developers should use `tox -e genconfig` to update it. +# Users are recommended to make changes to a copy of the file instead +# of the original, if any customizations are needed. +# ******************************************************************* +# title: Deploy Public SSL Endpoints as DNS Names +# description: | +# Use this environment when deploying an SSL-enabled overcloud where the public +# endpoint is a DNS name. +parameter_defaults: + # Mapping of service endpoint -> protocol. Typically set via parameter_defaults in the resource registry. + # Type: json + EndpointMap: + AodhAdmin: {protocol: 'http', port: '8042', host: 'IP_ADDRESS'} + AodhInternal: {protocol: 'http', port: '8042', host: 'IP_ADDRESS'} + AodhPublic: {protocol: 'https', port: '13042', host: 'CLOUDNAME'} + BarbicanAdmin: {protocol: 'http', port: '9311', host: 'IP_ADDRESS'} + BarbicanInternal: {protocol: 'http', port: '9311', host: 'IP_ADDRESS'} + BarbicanPublic: {protocol: 'https', port: '13311', host: 'CLOUDNAME'} + CeilometerAdmin: {protocol: 'http', port: '8777', host: 'IP_ADDRESS'} + CeilometerInternal: {protocol: 'http', port: '8777', host: 'IP_ADDRESS'} + CeilometerPublic: {protocol: 'https', port: '13777', host: 'CLOUDNAME'} + CephRgwAdmin: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + CephRgwInternal: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + CephRgwPublic: {protocol: 'https', port: '13808', host: 'CLOUDNAME'} + CinderAdmin: {protocol: 'http', port: '8776', host: 'IP_ADDRESS'} + CinderInternal: {protocol: 'http', port: '8776', host: 'IP_ADDRESS'} + CinderPublic: {protocol: 'https', port: '13776', host: 'CLOUDNAME'} + CongressAdmin: {protocol: 'http', port: '1789', host: 'IP_ADDRESS'} + CongressInternal: {protocol: 'http', port: '1789', host: 'IP_ADDRESS'} + CongressPublic: {protocol: 'https', port: '13789', host: 'CLOUDNAME'} + ContrailAnalyticsApiAdmin: {protocol: 'http', port: '8081', host: 'IP_ADDRESS'} + ContrailAnalyticsApiInternal: {protocol: 'http', port: '8081', host: 'IP_ADDRESS'} + ContrailAnalyticsApiPublic: {protocol: 'http', port: '8081', host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorHttpAdmin: {protocol: 'http', port: '8089', + host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorHttpInternal: {protocol: 'http', port: '8089', + host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorHttpPublic: {protocol: 'http', port: '8089', + host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorSandeshAdmin: {protocol: 'http', port: '8086', + host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorSandeshInternal: {protocol: 'http', port: '8086', + host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorSandeshPublic: {protocol: 'http', port: '8086', + host: 'IP_ADDRESS'} + ContrailAnalyticsHttpAdmin: {protocol: 'http', port: '8090', host: 'IP_ADDRESS'} + ContrailAnalyticsHttpInternal: {protocol: 'http', port: '8090', host: 'IP_ADDRESS'} + ContrailAnalyticsHttpPublic: {protocol: 'http', port: '8090', host: 'IP_ADDRESS'} + ContrailAnalyticsRedisAdmin: {protocol: 'http', port: '6379', host: 'IP_ADDRESS'} + ContrailAnalyticsRedisInternal: {protocol: 'http', port: '6379', host: 'IP_ADDRESS'} + ContrailAnalyticsRedisPublic: {protocol: 'http', port: '6379', host: 'IP_ADDRESS'} + ContrailConfigAdmin: {protocol: 'http', port: '8082', host: 'IP_ADDRESS'} + ContrailConfigInternal: {protocol: 'http', port: '8082', host: 'IP_ADDRESS'} + ContrailConfigPublic: {protocol: 'http', port: '8082', host: 'IP_ADDRESS'} + ContrailDiscoveryAdmin: {protocol: 'http', port: '5998', host: 'IP_ADDRESS'} + ContrailDiscoveryInternal: {protocol: 'http', port: '5998', host: 'IP_ADDRESS'} + ContrailDiscoveryPublic: {protocol: 'http', port: '5998', host: 'IP_ADDRESS'} + ContrailWebuiHttpAdmin: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + ContrailWebuiHttpInternal: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + ContrailWebuiHttpPublic: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + ContrailWebuiHttpsAdmin: {protocol: 'http', port: '8143', host: 'IP_ADDRESS'} + ContrailWebuiHttpsInternal: {protocol: 'http', port: '8143', host: 'IP_ADDRESS'} + ContrailWebuiHttpsPublic: {protocol: 'http', port: '8143', host: 'IP_ADDRESS'} + Ec2ApiAdmin: {protocol: 'http', port: '8788', host: 'IP_ADDRESS'} + Ec2ApiInternal: {protocol: 'http', port: '8788', host: 'IP_ADDRESS'} + Ec2ApiPublic: {protocol: 'https', port: '13788', host: 'CLOUDNAME'} + GlanceAdmin: {protocol: 'http', port: '9292', host: 'IP_ADDRESS'} + GlanceInternal: {protocol: 'http', port: '9292', host: 'IP_ADDRESS'} + GlancePublic: {protocol: 'https', port: '13292', host: 'CLOUDNAME'} + GnocchiAdmin: {protocol: 'http', port: '8041', host: 'IP_ADDRESS'} + GnocchiInternal: {protocol: 'http', port: '8041', host: 'IP_ADDRESS'} + GnocchiPublic: {protocol: 'https', port: '13041', host: 'CLOUDNAME'} + HeatAdmin: {protocol: 'http', port: '8004', host: 'IP_ADDRESS'} + HeatInternal: {protocol: 'http', port: '8004', host: 'IP_ADDRESS'} + HeatPublic: {protocol: 'https', port: '13004', host: 'CLOUDNAME'} + HeatCfnAdmin: {protocol: 'http', port: '8000', host: 'IP_ADDRESS'} + HeatCfnInternal: {protocol: 'http', port: '8000', host: 'IP_ADDRESS'} + HeatCfnPublic: {protocol: 'https', port: '13005', host: 'CLOUDNAME'} + HorizonPublic: {protocol: 'https', port: '443', host: 'CLOUDNAME'} + IronicAdmin: {protocol: 'http', port: '6385', host: 'IP_ADDRESS'} + IronicInternal: {protocol: 'http', port: '6385', host: 'IP_ADDRESS'} + IronicPublic: {protocol: 'https', port: '13385', host: 'CLOUDNAME'} + IronicInspectorAdmin: {protocol: 'http', port: '5050', host: 'IP_ADDRESS'} + IronicInspectorInternal: {protocol: 'http', port: '5050', host: 'IP_ADDRESS'} + IronicInspectorPublic: {protocol: 'https', port: '13050', host: 'CLOUDNAME'} + KeystoneAdmin: {protocol: 'http', port: '35357', host: 'IP_ADDRESS'} + KeystoneInternal: {protocol: 'http', port: '5000', host: 'IP_ADDRESS'} + KeystonePublic: {protocol: 'https', port: '13000', host: 'CLOUDNAME'} + ManilaAdmin: {protocol: 'http', port: '8786', host: 'IP_ADDRESS'} + ManilaInternal: {protocol: 'http', port: '8786', host: 'IP_ADDRESS'} + ManilaPublic: {protocol: 'https', port: '13786', host: 'CLOUDNAME'} + MistralAdmin: {protocol: 'http', port: '8989', host: 'IP_ADDRESS'} + MistralInternal: {protocol: 'http', port: '8989', host: 'IP_ADDRESS'} + MistralPublic: {protocol: 'https', port: '13989', host: 'CLOUDNAME'} + MysqlInternal: {protocol: 'mysql+pymysql', port: '3306', host: 'IP_ADDRESS'} + NeutronAdmin: {protocol: 'http', port: '9696', host: 'IP_ADDRESS'} + NeutronInternal: {protocol: 'http', port: '9696', host: 'IP_ADDRESS'} + NeutronPublic: {protocol: 'https', port: '13696', host: 'CLOUDNAME'} + NovaAdmin: {protocol: 'http', port: '8774', host: 'IP_ADDRESS'} + NovaInternal: {protocol: 'http', port: '8774', host: 'IP_ADDRESS'} + NovaPublic: {protocol: 'https', port: '13774', host: 'CLOUDNAME'} + NovaPlacementAdmin: {protocol: 'http', port: '8778', host: 'IP_ADDRESS'} + NovaPlacementInternal: {protocol: 'http', port: '8778', host: 'IP_ADDRESS'} + NovaPlacementPublic: {protocol: 'https', port: '13778', host: 'CLOUDNAME'} + NovaVNCProxyAdmin: {protocol: 'http', port: '6080', host: 'IP_ADDRESS'} + NovaVNCProxyInternal: {protocol: 'http', port: '6080', host: 'IP_ADDRESS'} + NovaVNCProxyPublic: {protocol: 'https', port: '13080', host: 'CLOUDNAME'} + OctaviaAdmin: {protocol: 'http', port: '9876', host: 'IP_ADDRESS'} + OctaviaInternal: {protocol: 'http', port: '9876', host: 'IP_ADDRESS'} + OctaviaPublic: {protocol: 'https', port: '13876', host: 'CLOUDNAME'} + PankoAdmin: {protocol: 'http', port: '8779', host: 'IP_ADDRESS'} + PankoInternal: {protocol: 'http', port: '8779', host: 'IP_ADDRESS'} + PankoPublic: {protocol: 'https', port: '13779', host: 'CLOUDNAME'} + SaharaAdmin: {protocol: 'http', port: '8386', host: 'IP_ADDRESS'} + SaharaInternal: {protocol: 'http', port: '8386', host: 'IP_ADDRESS'} + SaharaPublic: {protocol: 'https', port: '13386', host: 'CLOUDNAME'} + SwiftAdmin: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + SwiftInternal: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + SwiftPublic: {protocol: 'https', port: '13808', host: 'CLOUDNAME'} + TackerAdmin: {protocol: 'http', port: '9890', host: 'IP_ADDRESS'} + TackerInternal: {protocol: 'http', port: '9890', host: 'IP_ADDRESS'} + TackerPublic: {protocol: 'https', port: '13989', host: 'CLOUDNAME'} + ZaqarAdmin: {protocol: 'http', port: '8888', host: 'IP_ADDRESS'} + ZaqarInternal: {protocol: 'http', port: '8888', host: 'IP_ADDRESS'} + ZaqarPublic: {protocol: 'https', port: '13888', host: 'CLOUDNAME'} + ZaqarWebSocketAdmin: {protocol: 'ws', port: '9000', host: 'IP_ADDRESS'} + ZaqarWebSocketInternal: {protocol: 'ws', port: '9000', host: 'IP_ADDRESS'} + ZaqarWebSocketPublic: {protocol: 'wss', port: '9000', host: 'CLOUDNAME'} + diff --git a/environments/ssl/tls-endpoints-public-ip.yaml b/environments/ssl/tls-endpoints-public-ip.yaml new file mode 100644 index 00000000..d216ab7f --- /dev/null +++ b/environments/ssl/tls-endpoints-public-ip.yaml @@ -0,0 +1,131 @@ +# ******************************************************************* +# This file was created automatically by the sample environment +# generator. Developers should use `tox -e genconfig` to update it. +# Users are recommended to make changes to a copy of the file instead +# of the original, if any customizations are needed. +# ******************************************************************* +# title: Deploy Public SSL Endpoints as IP Addresses +# description: | +# Use this environment when deploying an SSL-enabled overcloud where the public +# endpoint is an IP address. +parameter_defaults: + # Mapping of service endpoint -> protocol. Typically set via parameter_defaults in the resource registry. + # Type: json + EndpointMap: + AodhAdmin: {protocol: 'http', port: '8042', host: 'IP_ADDRESS'} + AodhInternal: {protocol: 'http', port: '8042', host: 'IP_ADDRESS'} + AodhPublic: {protocol: 'https', port: '13042', host: 'IP_ADDRESS'} + BarbicanAdmin: {protocol: 'http', port: '9311', host: 'IP_ADDRESS'} + BarbicanInternal: {protocol: 'http', port: '9311', host: 'IP_ADDRESS'} + BarbicanPublic: {protocol: 'https', port: '13311', host: 'IP_ADDRESS'} + CeilometerAdmin: {protocol: 'http', port: '8777', host: 'IP_ADDRESS'} + CeilometerInternal: {protocol: 'http', port: '8777', host: 'IP_ADDRESS'} + CeilometerPublic: {protocol: 'https', port: '13777', host: 'IP_ADDRESS'} + CephRgwAdmin: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + CephRgwInternal: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + CephRgwPublic: {protocol: 'https', port: '13808', host: 'IP_ADDRESS'} + CinderAdmin: {protocol: 'http', port: '8776', host: 'IP_ADDRESS'} + CinderInternal: {protocol: 'http', port: '8776', host: 'IP_ADDRESS'} + CinderPublic: {protocol: 'https', port: '13776', host: 'IP_ADDRESS'} + CongressAdmin: {protocol: 'http', port: '1789', host: 'IP_ADDRESS'} + CongressInternal: {protocol: 'http', port: '1789', host: 'IP_ADDRESS'} + CongressPublic: {protocol: 'https', port: '13789', host: 'IP_ADDRESS'} + ContrailAnalyticsApiAdmin: {protocol: 'http', port: '8081', host: 'IP_ADDRESS'} + ContrailAnalyticsApiInternal: {protocol: 'http', port: '8081', host: 'IP_ADDRESS'} + ContrailAnalyticsApiPublic: {protocol: 'http', port: '8081', host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorHttpAdmin: {protocol: 'http', port: '8089', + host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorHttpInternal: {protocol: 'http', port: '8089', + host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorHttpPublic: {protocol: 'http', port: '8089', + host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorSandeshAdmin: {protocol: 'http', port: '8086', + host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorSandeshInternal: {protocol: 'http', port: '8086', + host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorSandeshPublic: {protocol: 'http', port: '8086', + host: 'IP_ADDRESS'} + ContrailAnalyticsHttpAdmin: {protocol: 'http', port: '8090', host: 'IP_ADDRESS'} + ContrailAnalyticsHttpInternal: {protocol: 'http', port: '8090', host: 'IP_ADDRESS'} + ContrailAnalyticsHttpPublic: {protocol: 'http', port: '8090', host: 'IP_ADDRESS'} + ContrailAnalyticsRedisAdmin: {protocol: 'http', port: '6379', host: 'IP_ADDRESS'} + ContrailAnalyticsRedisInternal: {protocol: 'http', port: '6379', host: 'IP_ADDRESS'} + ContrailAnalyticsRedisPublic: {protocol: 'http', port: '6379', host: 'IP_ADDRESS'} + ContrailConfigAdmin: {protocol: 'http', port: '8082', host: 'IP_ADDRESS'} + ContrailConfigInternal: {protocol: 'http', port: '8082', host: 'IP_ADDRESS'} + ContrailConfigPublic: {protocol: 'http', port: '8082', host: 'IP_ADDRESS'} + ContrailDiscoveryAdmin: {protocol: 'http', port: '5998', host: 'IP_ADDRESS'} + ContrailDiscoveryInternal: {protocol: 'http', port: '5998', host: 'IP_ADDRESS'} + ContrailDiscoveryPublic: {protocol: 'http', port: '5998', host: 'IP_ADDRESS'} + ContrailWebuiHttpAdmin: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + ContrailWebuiHttpInternal: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + ContrailWebuiHttpPublic: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + ContrailWebuiHttpsAdmin: {protocol: 'http', port: '8143', host: 'IP_ADDRESS'} + ContrailWebuiHttpsInternal: {protocol: 'http', port: '8143', host: 'IP_ADDRESS'} + ContrailWebuiHttpsPublic: {protocol: 'http', port: '8143', host: 'IP_ADDRESS'} + Ec2ApiAdmin: {protocol: 'http', port: '8788', host: 'IP_ADDRESS'} + Ec2ApiInternal: {protocol: 'http', port: '8788', host: 'IP_ADDRESS'} + Ec2ApiPublic: {protocol: 'https', port: '13788', host: 'IP_ADDRESS'} + GlanceAdmin: {protocol: 'http', port: '9292', host: 'IP_ADDRESS'} + GlanceInternal: {protocol: 'http', port: '9292', host: 'IP_ADDRESS'} + GlancePublic: {protocol: 'https', port: '13292', host: 'IP_ADDRESS'} + GnocchiAdmin: {protocol: 'http', port: '8041', host: 'IP_ADDRESS'} + GnocchiInternal: {protocol: 'http', port: '8041', host: 'IP_ADDRESS'} + GnocchiPublic: {protocol: 'https', port: '13041', host: 'IP_ADDRESS'} + HeatAdmin: {protocol: 'http', port: '8004', host: 'IP_ADDRESS'} + HeatInternal: {protocol: 'http', port: '8004', host: 'IP_ADDRESS'} + HeatPublic: {protocol: 'https', port: '13004', host: 'IP_ADDRESS'} + HeatCfnAdmin: {protocol: 'http', port: '8000', host: 'IP_ADDRESS'} + HeatCfnInternal: {protocol: 'http', port: '8000', host: 'IP_ADDRESS'} + HeatCfnPublic: {protocol: 'https', port: '13005', host: 'IP_ADDRESS'} + HorizonPublic: {protocol: 'https', port: '443', host: 'IP_ADDRESS'} + IronicAdmin: {protocol: 'http', port: '6385', host: 'IP_ADDRESS'} + IronicInternal: {protocol: 'http', port: '6385', host: 'IP_ADDRESS'} + IronicPublic: {protocol: 'https', port: '13385', host: 'IP_ADDRESS'} + IronicInspectorAdmin: {protocol: 'http', port: '5050', host: 'IP_ADDRESS'} + IronicInspectorInternal: {protocol: 'http', port: '5050', host: 'IP_ADDRESS'} + IronicInspectorPublic: {protocol: 'https', port: '13050', host: 'IP_ADDRESS'} + KeystoneAdmin: {protocol: 'http', port: '35357', host: 'IP_ADDRESS'} + KeystoneInternal: {protocol: 'http', port: '5000', host: 'IP_ADDRESS'} + KeystonePublic: {protocol: 'https', port: '13000', host: 'IP_ADDRESS'} + ManilaAdmin: {protocol: 'http', port: '8786', host: 'IP_ADDRESS'} + ManilaInternal: {protocol: 'http', port: '8786', host: 'IP_ADDRESS'} + ManilaPublic: {protocol: 'https', port: '13786', host: 'IP_ADDRESS'} + MistralAdmin: {protocol: 'http', port: '8989', host: 'IP_ADDRESS'} + MistralInternal: {protocol: 'http', port: '8989', host: 'IP_ADDRESS'} + MistralPublic: {protocol: 'https', port: '13989', host: 'IP_ADDRESS'} + MysqlInternal: {protocol: 'mysql+pymysql', port: '3306', host: 'IP_ADDRESS'} + NeutronAdmin: {protocol: 'http', port: '9696', host: 'IP_ADDRESS'} + NeutronInternal: {protocol: 'http', port: '9696', host: 'IP_ADDRESS'} + NeutronPublic: {protocol: 'https', port: '13696', host: 'IP_ADDRESS'} + NovaAdmin: {protocol: 'http', port: '8774', host: 'IP_ADDRESS'} + NovaInternal: {protocol: 'http', port: '8774', host: 'IP_ADDRESS'} + NovaPublic: {protocol: 'https', port: '13774', host: 'IP_ADDRESS'} + NovaPlacementAdmin: {protocol: 'http', port: '8778', host: 'IP_ADDRESS'} + NovaPlacementInternal: {protocol: 'http', port: '8778', host: 'IP_ADDRESS'} + NovaPlacementPublic: {protocol: 'https', port: '13778', host: 'IP_ADDRESS'} + NovaVNCProxyAdmin: {protocol: 'http', port: '6080', host: 'IP_ADDRESS'} + NovaVNCProxyInternal: {protocol: 'http', port: '6080', host: 'IP_ADDRESS'} + NovaVNCProxyPublic: {protocol: 'https', port: '13080', host: 'IP_ADDRESS'} + OctaviaAdmin: {protocol: 'http', port: '9876', host: 'IP_ADDRESS'} + OctaviaInternal: {protocol: 'http', port: '9876', host: 'IP_ADDRESS'} + OctaviaPublic: {protocol: 'https', port: '13876', host: 'IP_ADDRESS'} + PankoAdmin: {protocol: 'http', port: '8779', host: 'IP_ADDRESS'} + PankoInternal: {protocol: 'http', port: '8779', host: 'IP_ADDRESS'} + PankoPublic: {protocol: 'https', port: '13779', host: 'IP_ADDRESS'} + SaharaAdmin: {protocol: 'http', port: '8386', host: 'IP_ADDRESS'} + SaharaInternal: {protocol: 'http', port: '8386', host: 'IP_ADDRESS'} + SaharaPublic: {protocol: 'https', port: '13386', host: 'IP_ADDRESS'} + SwiftAdmin: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + SwiftInternal: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + SwiftPublic: {protocol: 'https', port: '13808', host: 'IP_ADDRESS'} + TackerAdmin: {protocol: 'http', port: '9890', host: 'IP_ADDRESS'} + TackerInternal: {protocol: 'http', port: '9890', host: 'IP_ADDRESS'} + TackerPublic: {protocol: 'https', port: '13989', host: 'IP_ADDRESS'} + ZaqarAdmin: {protocol: 'http', port: '8888', host: 'IP_ADDRESS'} + ZaqarInternal: {protocol: 'http', port: '8888', host: 'IP_ADDRESS'} + ZaqarPublic: {protocol: 'https', port: '13888', host: 'IP_ADDRESS'} + ZaqarWebSocketAdmin: {protocol: 'ws', port: '9000', host: 'IP_ADDRESS'} + ZaqarWebSocketInternal: {protocol: 'ws', port: '9000', host: 'IP_ADDRESS'} + ZaqarWebSocketPublic: {protocol: 'wss', port: '9000', host: 'IP_ADDRESS'} + diff --git a/environments/ssl/tls-everywhere-endpoints-dns.yaml b/environments/ssl/tls-everywhere-endpoints-dns.yaml new file mode 100644 index 00000000..63157ddd --- /dev/null +++ b/environments/ssl/tls-everywhere-endpoints-dns.yaml @@ -0,0 +1,131 @@ +# ******************************************************************* +# This file was created automatically by the sample environment +# generator. Developers should use `tox -e genconfig` to update it. +# Users are recommended to make changes to a copy of the file instead +# of the original, if any customizations are needed. +# ******************************************************************* +# title: Deploy All SSL Endpoints as DNS Names +# description: | +# Use this environment when deploying an overcloud where all the endpoints are +# DNS names and there's TLS in all endpoint types. +parameter_defaults: + # Mapping of service endpoint -> protocol. Typically set via parameter_defaults in the resource registry. + # Type: json + EndpointMap: + AodhAdmin: {protocol: 'https', port: '8042', host: 'CLOUDNAME'} + AodhInternal: {protocol: 'https', port: '8042', host: 'CLOUDNAME'} + AodhPublic: {protocol: 'https', port: '13042', host: 'CLOUDNAME'} + BarbicanAdmin: {protocol: 'https', port: '9311', host: 'CLOUDNAME'} + BarbicanInternal: {protocol: 'https', port: '9311', host: 'CLOUDNAME'} + BarbicanPublic: {protocol: 'https', port: '13311', host: 'CLOUDNAME'} + CeilometerAdmin: {protocol: 'https', port: '8777', host: 'CLOUDNAME'} + CeilometerInternal: {protocol: 'https', port: '8777', host: 'CLOUDNAME'} + CeilometerPublic: {protocol: 'https', port: '13777', host: 'CLOUDNAME'} + CephRgwAdmin: {protocol: 'https', port: '8080', host: 'CLOUDNAME'} + CephRgwInternal: {protocol: 'https', port: '8080', host: 'CLOUDNAME'} + CephRgwPublic: {protocol: 'https', port: '13808', host: 'CLOUDNAME'} + CinderAdmin: {protocol: 'https', port: '8776', host: 'CLOUDNAME'} + CinderInternal: {protocol: 'https', port: '8776', host: 'CLOUDNAME'} + CinderPublic: {protocol: 'https', port: '13776', host: 'CLOUDNAME'} + CongressAdmin: {protocol: 'https', port: '1789', host: 'CLOUDNAME'} + CongressInternal: {protocol: 'https', port: '1789', host: 'CLOUDNAME'} + CongressPublic: {protocol: 'https', port: '13789', host: 'CLOUDNAME'} + ContrailAnalyticsApiAdmin: {protocol: 'http', port: '8081', host: 'IP_ADDRESS'} + ContrailAnalyticsApiInternal: {protocol: 'http', port: '8081', host: 'IP_ADDRESS'} + ContrailAnalyticsApiPublic: {protocol: 'http', port: '8081', host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorHttpAdmin: {protocol: 'http', port: '8089', + host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorHttpInternal: {protocol: 'http', port: '8089', + host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorHttpPublic: {protocol: 'http', port: '8089', + host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorSandeshAdmin: {protocol: 'http', port: '8086', + host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorSandeshInternal: {protocol: 'http', port: '8086', + host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorSandeshPublic: {protocol: 'http', port: '8086', + host: 'IP_ADDRESS'} + ContrailAnalyticsHttpAdmin: {protocol: 'http', port: '8090', host: 'IP_ADDRESS'} + ContrailAnalyticsHttpInternal: {protocol: 'http', port: '8090', host: 'IP_ADDRESS'} + ContrailAnalyticsHttpPublic: {protocol: 'http', port: '8090', host: 'IP_ADDRESS'} + ContrailAnalyticsRedisAdmin: {protocol: 'http', port: '6379', host: 'IP_ADDRESS'} + ContrailAnalyticsRedisInternal: {protocol: 'http', port: '6379', host: 'IP_ADDRESS'} + ContrailAnalyticsRedisPublic: {protocol: 'http', port: '6379', host: 'IP_ADDRESS'} + ContrailConfigAdmin: {protocol: 'http', port: '8082', host: 'IP_ADDRESS'} + ContrailConfigInternal: {protocol: 'http', port: '8082', host: 'IP_ADDRESS'} + ContrailConfigPublic: {protocol: 'http', port: '8082', host: 'IP_ADDRESS'} + ContrailDiscoveryAdmin: {protocol: 'http', port: '5998', host: 'IP_ADDRESS'} + ContrailDiscoveryInternal: {protocol: 'http', port: '5998', host: 'IP_ADDRESS'} + ContrailDiscoveryPublic: {protocol: 'http', port: '5998', host: 'IP_ADDRESS'} + ContrailWebuiHttpAdmin: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + ContrailWebuiHttpInternal: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + ContrailWebuiHttpPublic: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + ContrailWebuiHttpsAdmin: {protocol: 'http', port: '8143', host: 'IP_ADDRESS'} + ContrailWebuiHttpsInternal: {protocol: 'http', port: '8143', host: 'IP_ADDRESS'} + ContrailWebuiHttpsPublic: {protocol: 'http', port: '8143', host: 'IP_ADDRESS'} + Ec2ApiAdmin: {protocol: 'https', port: '8788', host: 'CLOUDNAME'} + Ec2ApiInternal: {protocol: 'https', port: '8788', host: 'CLOUDNAME'} + Ec2ApiPublic: {protocol: 'https', port: '13788', host: 'CLOUDNAME'} + GlanceAdmin: {protocol: 'https', port: '9292', host: 'CLOUDNAME'} + GlanceInternal: {protocol: 'https', port: '9292', host: 'CLOUDNAME'} + GlancePublic: {protocol: 'https', port: '13292', host: 'CLOUDNAME'} + GnocchiAdmin: {protocol: 'https', port: '8041', host: 'CLOUDNAME'} + GnocchiInternal: {protocol: 'https', port: '8041', host: 'CLOUDNAME'} + GnocchiPublic: {protocol: 'https', port: '13041', host: 'CLOUDNAME'} + HeatAdmin: {protocol: 'https', port: '8004', host: 'CLOUDNAME'} + HeatInternal: {protocol: 'https', port: '8004', host: 'CLOUDNAME'} + HeatPublic: {protocol: 'https', port: '13004', host: 'CLOUDNAME'} + HeatCfnAdmin: {protocol: 'https', port: '8000', host: 'CLOUDNAME'} + HeatCfnInternal: {protocol: 'https', port: '8000', host: 'CLOUDNAME'} + HeatCfnPublic: {protocol: 'https', port: '13005', host: 'CLOUDNAME'} + HorizonPublic: {protocol: 'https', port: '443', host: 'CLOUDNAME'} + IronicAdmin: {protocol: 'https', port: '6385', host: 'CLOUDNAME'} + IronicInternal: {protocol: 'https', port: '6385', host: 'CLOUDNAME'} + IronicPublic: {protocol: 'https', port: '13385', host: 'CLOUDNAME'} + IronicInspectorAdmin: {protocol: 'http', port: '5050', host: 'CLOUDNAME'} + IronicInspectorInternal: {protocol: 'http', port: '5050', host: 'CLOUDNAME'} + IronicInspectorPublic: {protocol: 'https', port: '13050', host: 'CLOUDNAME'} + KeystoneAdmin: {protocol: 'https', port: '35357', host: 'CLOUDNAME'} + KeystoneInternal: {protocol: 'https', port: '5000', host: 'CLOUDNAME'} + KeystonePublic: {protocol: 'https', port: '13000', host: 'CLOUDNAME'} + ManilaAdmin: {protocol: 'https', port: '8786', host: 'CLOUDNAME'} + ManilaInternal: {protocol: 'https', port: '8786', host: 'CLOUDNAME'} + ManilaPublic: {protocol: 'https', port: '13786', host: 'CLOUDNAME'} + MistralAdmin: {protocol: 'https', port: '8989', host: 'CLOUDNAME'} + MistralInternal: {protocol: 'https', port: '8989', host: 'CLOUDNAME'} + MistralPublic: {protocol: 'https', port: '13989', host: 'CLOUDNAME'} + MysqlInternal: {protocol: 'mysql+pymysql', port: '3306', host: 'CLOUDNAME'} + NeutronAdmin: {protocol: 'https', port: '9696', host: 'CLOUDNAME'} + NeutronInternal: {protocol: 'https', port: '9696', host: 'CLOUDNAME'} + NeutronPublic: {protocol: 'https', port: '13696', host: 'CLOUDNAME'} + NovaAdmin: {protocol: 'https', port: '8774', host: 'CLOUDNAME'} + NovaInternal: {protocol: 'https', port: '8774', host: 'CLOUDNAME'} + NovaPublic: {protocol: 'https', port: '13774', host: 'CLOUDNAME'} + NovaPlacementAdmin: {protocol: 'https', port: '8778', host: 'CLOUDNAME'} + NovaPlacementInternal: {protocol: 'https', port: '8778', host: 'CLOUDNAME'} + NovaPlacementPublic: {protocol: 'https', port: '13778', host: 'CLOUDNAME'} + NovaVNCProxyAdmin: {protocol: 'https', port: '6080', host: 'CLOUDNAME'} + NovaVNCProxyInternal: {protocol: 'https', port: '6080', host: 'CLOUDNAME'} + NovaVNCProxyPublic: {protocol: 'https', port: '13080', host: 'CLOUDNAME'} + OctaviaAdmin: {protocol: 'https', port: '9876', host: 'IP_ADDRESS'} + OctaviaInternal: {protocol: 'https', port: '9876', host: 'IP_ADDRESS'} + OctaviaPublic: {protocol: 'https', port: '13876', host: 'CLOUDNAME'} + PankoAdmin: {protocol: 'https', port: '8779', host: 'CLOUDNAME'} + PankoInternal: {protocol: 'https', port: '8779', host: 'CLOUDNAME'} + PankoPublic: {protocol: 'https', port: '13779', host: 'CLOUDNAME'} + SaharaAdmin: {protocol: 'https', port: '8386', host: 'CLOUDNAME'} + SaharaInternal: {protocol: 'https', port: '8386', host: 'CLOUDNAME'} + SaharaPublic: {protocol: 'https', port: '13386', host: 'CLOUDNAME'} + SwiftAdmin: {protocol: 'https', port: '8080', host: 'CLOUDNAME'} + SwiftInternal: {protocol: 'https', port: '8080', host: 'CLOUDNAME'} + SwiftPublic: {protocol: 'https', port: '13808', host: 'CLOUDNAME'} + TackerAdmin: {protocol: 'https', port: '9890', host: 'CLOUDNAME'} + TackerInternal: {protocol: 'https', port: '9890', host: 'CLOUDNAME'} + TackerPublic: {protocol: 'https', port: '13989', host: 'CLOUDNAME'} + ZaqarAdmin: {protocol: 'https', port: '8888', host: 'CLOUDNAME'} + ZaqarInternal: {protocol: 'https', port: '8888', host: 'CLOUDNAME'} + ZaqarPublic: {protocol: 'https', port: '13888', host: 'CLOUDNAME'} + ZaqarWebSocketAdmin: {protocol: 'wss', port: '9000', host: 'CLOUDNAME'} + ZaqarWebSocketInternal: {protocol: 'wss', port: '9000', host: 'CLOUDNAME'} + ZaqarWebSocketPublic: {protocol: 'wss', port: '9000', host: 'CLOUDNAME'} + diff --git a/environments/storage/cinder-netapp-config.yaml b/environments/storage/cinder-netapp-config.yaml new file mode 100644 index 00000000..4cdba09b --- /dev/null +++ b/environments/storage/cinder-netapp-config.yaml @@ -0,0 +1,119 @@ +# ******************************************************************* +# This file was created automatically by the sample environment +# generator. Developers should use `tox -e genconfig` to update it. +# Users are recommended to make changes to a copy of the file instead +# of the original, if any customizations are needed. +# ******************************************************************* +# title: Enable the Cinder NetApp Backend +# description: | +# A Heat environment file which can be used to enable a +# a Cinder NetApp backend, configured via puppet +parameter_defaults: + # + # Type: string + CinderNetappBackendName: tripleo_netapp + + # + # Type: string + CinderNetappControllerIps: '' + + # + # Type: string + CinderNetappCopyOffloadToolPath: '' + + # + # Type: string + CinderNetappEseriesHostType: linux_dm_mp + + # + # Type: string + CinderNetappHostType: '' + + # + # Mandatory. This parameter must be set by the user. + # Type: string + CinderNetappLogin: <None> + + # + # Type: string + CinderNetappNfsMountOptions: '' + + # + # Type: string + CinderNetappNfsShares: '' + + # + # Type: string + CinderNetappNfsSharesConfig: /etc/cinder/shares.conf + + # + # Type: string + CinderNetappPartnerBackendName: '' + + # + # Mandatory. This parameter must be set by the user. + # Type: string + CinderNetappPassword: <None> + + # + # Type: string + CinderNetappSaPassword: '' + + # + # Mandatory. This parameter must be set by the user. + # Type: string + CinderNetappServerHostname: <None> + + # + # Type: string + CinderNetappServerPort: 80 + + # + # Type: string + CinderNetappSizeMultiplier: 1.2 + + # + # Type: string + CinderNetappStorageFamily: ontap_cluster + + # + # Type: string + CinderNetappStoragePools: '' + + # + # Type: string + CinderNetappStorageProtocol: nfs + + # + # Type: string + CinderNetappTransportType: http + + # + # Type: string + CinderNetappVfiler: '' + + # + # Type: string + CinderNetappVolumeList: '' + + # + # Type: string + CinderNetappVserver: '' + + # + # Type: string + CinderNetappWebservicePath: /devmgr/v2 + + # ****************************************************** + # Static parameters - these are values that must be + # included in the environment but should not be changed. + # ****************************************************** + # + # Type: boolean + CinderEnableNetappBackend: True + + # ********************* + # End static parameters + # ********************* +resource_registry: + OS::TripleO::ControllerExtraConfigPre: ../../puppet/extraconfig/pre_deploy/controller/cinder-netapp.yaml diff --git a/environments/storage/cinder-nfs.yaml b/environments/storage/cinder-nfs.yaml new file mode 100644 index 00000000..2de3e78c --- /dev/null +++ b/environments/storage/cinder-nfs.yaml @@ -0,0 +1,27 @@ +# ******************************************************************* +# This file was created automatically by the sample environment +# generator. Developers should use `tox -e genconfig` to update it. +# Users are recommended to make changes to a copy of the file instead +# of the original, if any customizations are needed. +# ******************************************************************* +# title: Enable Cinder NFS Backend +# description: | +# Configure and include this environment to enable the use of an NFS +# share as the backend for Cinder. +parameter_defaults: + # Whether to enable or not the Iscsi backend for Cinder + # Type: boolean + CinderEnableIscsiBackend: False + + # Whether to enable or not the NFS backend for Cinder + # Type: boolean + CinderEnableNfsBackend: True + + # Mount options for NFS mounts used by Cinder NFS backend. Effective when CinderEnableNfsBackend is true. + # Type: string + CinderNfsMountOptions: '' + + # NFS servers used by Cinder NFS backend. Effective when CinderEnableNfsBackend is true. + # Type: comma_delimited_list + CinderNfsServers: 192.168.122.1:/export/cinder + diff --git a/environments/storage/enable-ceph.yaml b/environments/storage/enable-ceph.yaml new file mode 100644 index 00000000..c629f74b --- /dev/null +++ b/environments/storage/enable-ceph.yaml @@ -0,0 +1,35 @@ +# ******************************************************************* +# This file was created automatically by the sample environment +# generator. Developers should use `tox -e genconfig` to update it. +# Users are recommended to make changes to a copy of the file instead +# of the original, if any customizations are needed. +# ******************************************************************* +# title: Enable Ceph Storage Backend +# description: | +# Include this environment to enable Ceph as the backend for +# Cinder, Nova, Gnocchi, and Glance. +parameter_defaults: + # The short name of the Cinder Backup backend to use. + # Type: string + CinderBackupBackend: rbd + + # Whether to enable or not the Iscsi backend for Cinder + # Type: boolean + CinderEnableIscsiBackend: False + + # Whether to enable or not the Rbd backend for Cinder + # Type: boolean + CinderEnableRbdBackend: True + + # The short name of the Glance backend to use. Should be one of swift, rbd, or file + # Type: string + GlanceBackend: rbd + + # The short name of the Gnocchi backend to use. Should be one of swift, rbd, or file + # Type: string + GnocchiBackend: rbd + + # Whether to enable or not the Rbd backend for Nova + # Type: boolean + NovaEnableRbdBackend: True + diff --git a/environments/storage/external-ceph.yaml b/environments/storage/external-ceph.yaml new file mode 100644 index 00000000..f1c9d516 --- /dev/null +++ b/environments/storage/external-ceph.yaml @@ -0,0 +1,78 @@ +# ******************************************************************* +# This file was created automatically by the sample environment +# generator. Developers should use `tox -e genconfig` to update it. +# Users are recommended to make changes to a copy of the file instead +# of the original, if any customizations are needed. +# ******************************************************************* +# title: Deploy Using an External Ceph Cluster +# description: | +# A Heat environment file which can be used to enable the +# use of an externally managed Ceph cluster. +parameter_defaults: + # The Ceph admin client key. Can be created with ceph-authtool --gen-print-key. + # Type: string + CephAdminKey: '' + + # The Ceph client key. Can be created with ceph-authtool --gen-print-key. Currently only used for external Ceph deployments to create the openstack user keyring. + # Mandatory. This parameter must be set by the user. + # Type: string + CephClientKey: <None> + + # + # Type: string + CephClientUserName: openstack + + # The Ceph cluster FSID. Must be a UUID. + # Mandatory. This parameter must be set by the user. + # Type: string + CephClusterFSID: <None> + + # List of externally managed Ceph Mon Host IPs. Only used for external Ceph deployments. + # Type: string + CephExternalMonHost: '' + + # Whether to enable or not the Iscsi backend for Cinder + # Type: boolean + CinderEnableIscsiBackend: False + + # Whether to enable or not the Rbd backend for Cinder + # Type: boolean + CinderEnableRbdBackend: True + + # + # Type: string + CinderRbdPoolName: volumes + + # The short name of the Glance backend to use. Should be one of swift, rbd, or file + # Type: string + GlanceBackend: rbd + + # + # Type: string + GlanceRbdPoolName: images + + # The short name of the Gnocchi backend to use. Should be one of swift, rbd, or file + # Type: string + GnocchiBackend: rbd + + # + # Type: string + GnocchiRbdPoolName: metrics + + # Whether to enable or not the Rbd backend for Nova + # Type: boolean + NovaEnableRbdBackend: True + + # + # Type: string + NovaRbdPoolName: vms + + # The default features enabled when creating a block device image. Only applies to format 2 images. Set to '1' for Jewel clients using older Ceph servers. + # Type: string + RbdDefaultFeatures: '' + +resource_registry: + OS::TripleO::Services::CephClient: OS::Heat::None + OS::TripleO::Services::CephExternal: ../../puppet/services/ceph-external.yaml + OS::TripleO::Services::CephMon: OS::Heat::None + OS::TripleO::Services::CephOSD: OS::Heat::None diff --git a/environments/storage/glance-nfs.yaml b/environments/storage/glance-nfs.yaml new file mode 100644 index 00000000..3c139306 --- /dev/null +++ b/environments/storage/glance-nfs.yaml @@ -0,0 +1,34 @@ +# ******************************************************************* +# This file was created automatically by the sample environment +# generator. Developers should use `tox -e genconfig` to update it. +# Users are recommended to make changes to a copy of the file instead +# of the original, if any customizations are needed. +# ******************************************************************* +# title: Enable Glance NFS Backend +# description: | +# Configure and include this environment to enable the use of an NFS +# share as the backend for Glance. +parameter_defaults: + # NFS mount options for image storage (when GlanceNfsEnabled is true) + # Type: string + GlanceNfsOptions: intr,context=system_u:object_r:glance_var_lib_t:s0 + + # NFS share to mount for image storage (when GlanceNfsEnabled is true) + # Type: string + GlanceNfsShare: '' + + # ****************************************************** + # Static parameters - these are values that must be + # included in the environment but should not be changed. + # ****************************************************** + # The short name of the Glance backend to use. Should be one of swift, rbd, or file + # Type: string + GlanceBackend: file + + # When using GlanceBackend 'file', mount NFS share for image storage. + # Type: boolean + GlanceNfsEnabled: True + + # ********************* + # End static parameters + # ********************* diff --git a/environments/tls-endpoints-public-dns.yaml b/environments/tls-endpoints-public-dns.yaml index 44432210..83b32495 100644 --- a/environments/tls-endpoints-public-dns.yaml +++ b/environments/tls-endpoints-public-dns.yaml @@ -1,3 +1,7 @@ +# ************************************************************************************* +# DEPRECATED: Use tripleo-heat-templates/environments/ssl/tls-endpoints-public-dns.yaml +# instead. +# ************************************************************************************* # Use this environment when deploying an SSL-enabled overcloud where the public # endpoint is a DNS name. parameter_defaults: @@ -100,9 +104,9 @@ parameter_defaults: OctaviaAdmin: {protocol: 'http', port: '9876', host: 'IP_ADDRESS'} OctaviaInternal: {protocol: 'http', port: '9876', host: 'IP_ADDRESS'} OctaviaPublic: {protocol: 'https', port: '13876', host: 'CLOUDNAME'} - PankoAdmin: {protocol: 'http', port: '8779', host: 'IP_ADDRESS'} - PankoInternal: {protocol: 'http', port: '8779', host: 'IP_ADDRESS'} - PankoPublic: {protocol: 'https', port: '13779', host: 'CLOUDNAME'} + PankoAdmin: {protocol: 'http', port: '8977', host: 'IP_ADDRESS'} + PankoInternal: {protocol: 'http', port: '8977', host: 'IP_ADDRESS'} + PankoPublic: {protocol: 'https', port: '13977', host: 'CLOUDNAME'} SaharaAdmin: {protocol: 'http', port: '8386', host: 'IP_ADDRESS'} SaharaInternal: {protocol: 'http', port: '8386', host: 'IP_ADDRESS'} SaharaPublic: {protocol: 'https', port: '13386', host: 'CLOUDNAME'} diff --git a/environments/tls-endpoints-public-ip.yaml b/environments/tls-endpoints-public-ip.yaml index 5ac2918b..8e502972 100644 --- a/environments/tls-endpoints-public-ip.yaml +++ b/environments/tls-endpoints-public-ip.yaml @@ -1,3 +1,7 @@ +# ************************************************************************************* +# DEPRECATED: Use tripleo-heat-templates/environments/ssl/tls-endpoints-public-ip.yaml +# instead. +# ************************************************************************************* # Use this environment when deploying an SSL-enabled overcloud where the public # endpoint is an IP address. parameter_defaults: @@ -100,9 +104,9 @@ parameter_defaults: OctaviaAdmin: {protocol: 'http', port: '9876', host: 'IP_ADDRESS'} OctaviaInternal: {protocol: 'http', port: '9876', host: 'IP_ADDRESS'} OctaviaPublic: {protocol: 'https', port: '13876', host: 'IP_ADDRESS'} - PankoAdmin: {protocol: 'http', port: '8779', host: 'IP_ADDRESS'} - PankoInternal: {protocol: 'http', port: '8779', host: 'IP_ADDRESS'} - PankoPublic: {protocol: 'https', port: '13779', host: 'IP_ADDRESS'} + PankoAdmin: {protocol: 'http', port: '8977', host: 'IP_ADDRESS'} + PankoInternal: {protocol: 'http', port: '8977', host: 'IP_ADDRESS'} + PankoPublic: {protocol: 'https', port: '13977', host: 'IP_ADDRESS'} SaharaAdmin: {protocol: 'http', port: '8386', host: 'IP_ADDRESS'} SaharaInternal: {protocol: 'http', port: '8386', host: 'IP_ADDRESS'} SaharaPublic: {protocol: 'https', port: '13386', host: 'IP_ADDRESS'} diff --git a/environments/tls-everywhere-endpoints-dns.yaml b/environments/tls-everywhere-endpoints-dns.yaml index 865ed4c3..84cabf10 100644 --- a/environments/tls-everywhere-endpoints-dns.yaml +++ b/environments/tls-everywhere-endpoints-dns.yaml @@ -72,8 +72,8 @@ parameter_defaults: IronicAdmin: {protocol: 'https', port: '6385', host: 'CLOUDNAME'} IronicInternal: {protocol: 'https', port: '6385', host: 'CLOUDNAME'} IronicPublic: {protocol: 'https', port: '13385', host: 'CLOUDNAME'} - IronicInspectorAdmin: {protocol: 'http', port: '5050', host: 'CLOUDNAME'} - IronicInspectorInternal: {protocol: 'http', port: '5050', host: 'CLOUDNAME'} + IronicInspectorAdmin: {protocol: 'https', port: '5050', host: 'CLOUDNAME'} + IronicInspectorInternal: {protocol: 'https', port: '5050', host: 'CLOUDNAME'} IronicInspectorPublic: {protocol: 'https', port: '13050', host: 'CLOUDNAME'} KeystoneAdmin: {protocol: 'https', port: '35357', host: 'CLOUDNAME'} KeystoneInternal: {protocol: 'https', port: '5000', host: 'CLOUDNAME'} @@ -100,9 +100,9 @@ parameter_defaults: OctaviaAdmin: {protocol: 'https', port: '9876', host: 'IP_ADDRESS'} OctaviaInternal: {protocol: 'https', port: '9876', host: 'IP_ADDRESS'} OctaviaPublic: {protocol: 'https', port: '13876', host: 'CLOUDNAME'} - PankoAdmin: {protocol: 'https', port: '8779', host: 'CLOUDNAME'} - PankoInternal: {protocol: 'https', port: '8779', host: 'CLOUDNAME'} - PankoPublic: {protocol: 'https', port: '13779', host: 'CLOUDNAME'} + PankoAdmin: {protocol: 'https', port: '8977', host: 'CLOUDNAME'} + PankoInternal: {protocol: 'https', port: '8977', host: 'CLOUDNAME'} + PankoPublic: {protocol: 'https', port: '13977', host: 'CLOUDNAME'} SaharaAdmin: {protocol: 'https', port: '8386', host: 'CLOUDNAME'} SaharaInternal: {protocol: 'https', port: '8386', host: 'CLOUDNAME'} SaharaPublic: {protocol: 'https', port: '13386', host: 'CLOUDNAME'} diff --git a/environments/undercloud.yaml b/environments/undercloud.yaml index 7a2716da..559d81df 100644 --- a/environments/undercloud.yaml +++ b/environments/undercloud.yaml @@ -18,3 +18,5 @@ parameter_defaults: HeatConvergenceEngine: false HeatMaxResourcesPerStack: -1 HeatMaxJsonBodySize: 2097152 + IronicInspectorInterface: br-ctlplane + IronicInspectorIpRange: '192.168.24.100,192.168.24.200' |