diff options
50 files changed, 833 insertions, 204 deletions
diff --git a/ci/environments/multinode-container-upgrade.yaml b/ci/environments/multinode-container-upgrade.yaml deleted file mode 100644 index 24bb1f49..00000000 --- a/ci/environments/multinode-container-upgrade.yaml +++ /dev/null @@ -1,70 +0,0 @@ -# NOTE: This is an environment specific for containers CI. Mainly we -# deploy non-pacemakerized overcloud. Once we are able to deploy and -# upgrade pacemakerized and containerized overcloud, we should remove -# this file and use normal CI multinode environments/scenarios. - -resource_registry: - OS::TripleO::Controller::Net::SoftwareConfig: ../common/net-config-multinode-os-net-config.yaml - OS::TripleO::Compute::Net::SoftwareConfig: ../common/net-config-multinode-os-net-config.yaml - - # NOTE: This is needed because of upgrades from Ocata to Pike. We - # deploy the initial environment with Ocata templates, and - # overcloud-resource-registry.yaml there doesn't have this Docker - # mapping at all. After we stop CI'ing Ocata->Pike upgrade, we can - # remove this. - OS::TripleO::Services::Docker: OS::Heat::None - -parameter_defaults: - ControllerServices: - - OS::TripleO::Services::CephMon - - OS::TripleO::Services::CephOSD - - OS::TripleO::Services::CinderApi - - OS::TripleO::Services::CinderScheduler - - OS::TripleO::Services::CinderVolume - - OS::TripleO::Services::Docker - - OS::TripleO::Services::Kernel - - OS::TripleO::Services::Keystone - - OS::TripleO::Services::GlanceApi - - OS::TripleO::Services::HeatApi - - OS::TripleO::Services::HeatApiCfn - - OS::TripleO::Services::HeatApiCloudwatch - - OS::TripleO::Services::HeatEngine - - OS::TripleO::Services::MySQL - - OS::TripleO::Services::MySQLClient - - OS::TripleO::Services::NeutronDhcpAgent - - OS::TripleO::Services::NeutronL3Agent - - OS::TripleO::Services::NeutronMetadataAgent - - OS::TripleO::Services::NeutronServer - - OS::TripleO::Services::NeutronCorePlugin - - OS::TripleO::Services::NeutronOvsAgent - - OS::TripleO::Services::RabbitMQ - - OS::TripleO::Services::HAproxy - - OS::TripleO::Services::Keepalived - - OS::TripleO::Services::Memcached - - OS::TripleO::Services::Pacemaker - - OS::TripleO::Services::NovaConductor - - OS::TripleO::Services::NovaApi - - OS::TripleO::Services::NovaPlacement - - OS::TripleO::Services::NovaMetadata - - OS::TripleO::Services::NovaScheduler - - OS::TripleO::Services::Ntp - - OS::TripleO::Services::SwiftProxy - - OS::TripleO::Services::SwiftStorage - - OS::TripleO::Services::SwiftRingBuilder - - OS::TripleO::Services::Snmp - - OS::TripleO::Services::Timezone - - OS::TripleO::Services::TripleoPackages - - OS::TripleO::Services::NovaCompute - - OS::TripleO::Services::NovaLibvirt - - OS::TripleO::Services::Sshd - ControllerExtraConfig: - nova::compute::libvirt::services::libvirt_virt_type: qemu - nova::compute::libvirt::libvirt_virt_type: qemu - # Required for Centos 7.3 and Qemu 2.6.0 - nova::compute::libvirt::libvirt_cpu_mode: 'none' - #NOTE(gfidente): not great but we need this to deploy on ext4 - #http://docs.ceph.com/docs/jewel/rados/configuration/filesystem-recommendations/ - ceph::profile::params::osd_max_object_name_len: 256 - ceph::profile::params::osd_max_object_namespace_len: 64 - SwiftCeilometerPipelineEnabled: False - Debug: True diff --git a/docker/docker-puppet.py b/docker/docker-puppet.py index 340a9e9f..4d9d40d4 100755 --- a/docker/docker-puppet.py +++ b/docker/docker-puppet.py @@ -190,37 +190,23 @@ def mp_puppet_config((config_volume, puppet_tags, manifest, config_image, volume if [ -n "$PUPPET_TAGS" ]; then TAGS="--tags \"$PUPPET_TAGS\"" fi + + # workaround LP1696283 + mkdir -p /etc/ssh + touch /etc/ssh/ssh_known_hosts + FACTER_hostname=$HOSTNAME FACTER_uuid=docker /usr/bin/puppet apply --verbose $TAGS /etc/config.pp # Disables archiving if [ -z "$NO_ARCHIVE" ]; then - rm -Rf /var/lib/config-data/${NAME} - - # copying etc should be enough for most services - mkdir -p /var/lib/config-data/${NAME}/etc - cp -a /etc/* /var/lib/config-data/${NAME}/etc/ - - # workaround LP1696283 - mkdir -p /var/lib/config-data/${NAME}/etc/ssh - touch /var/lib/config-data/${NAME}/etc/ssh/ssh_known_hosts - - if [ -d /root/ ]; then - cp -a /root/ /var/lib/config-data/${NAME}/root/ - fi - if [ -d /var/lib/ironic/tftpboot/ ]; then - mkdir -p /var/lib/config-data/${NAME}/var/lib/ironic/ - cp -a /var/lib/ironic/tftpboot/ /var/lib/config-data/${NAME}/var/lib/ironic/tftpboot/ - fi - if [ -d /var/lib/ironic/httpboot/ ]; then - mkdir -p /var/lib/config-data/${NAME}/var/lib/ironic/ - cp -a /var/lib/ironic/httpboot/ /var/lib/config-data/${NAME}/var/lib/ironic/httpboot/ - fi - - # apache services may files placed in /var/www/ - if [ -d /var/www/ ]; then - mkdir -p /var/lib/config-data/${NAME}/var/www - cp -a /var/www/* /var/lib/config-data/${NAME}/var/www/ - fi + archivedirs=("/etc" "/root" "/var/lib/ironic/tftpboot" "/var/lib/ironic/httpboot" "/var/www") + rsync_srcs="" + for d in "${archivedirs[@]}"; do + if [ -d "$d" ]; then + rsync_srcs+=" $d" + fi + done + rsync -a -R --delay-updates --delete-after $rsync_srcs /var/lib/config-data/${NAME} # Write a checksum of the config-data dir, this is used as a # salt to trigger container restart when the config changes diff --git a/docker/docker-steps.j2 b/docker/docker-steps.j2 index a56ca02b..3dd963b9 100644 --- a/docker/docker-steps.j2 +++ b/docker/docker-steps.j2 @@ -139,10 +139,6 @@ resources: - name: Write kolla config json files copy: content="{{item.value|to_json}}" dest="{{item.key}}" force=yes with_dict: "{{kolla_config}}" - - name: Install paunch FIXME remove when packaged - shell: | - yum -y install python-pip - pip install paunch ######################################################## # Bootstrap tasks, only performed on bootstrap_server_id ######################################################## @@ -220,26 +216,31 @@ resources: {% endfor %} # END CONFIG STEPS - {{role.name}}PostConfig: - type: OS::TripleO::Tasks::{{role.name}}PostConfig + # Note, this should be the last step to execute configuration changes. + # Ensure that all {{role.name}}ExtraConfigPost steps are executed + # after all the previous deployment steps. + {{role.name}}ExtraConfigPost: depends_on: {% for dep in roles %} - {{dep.name}}Deployment_Step5 {% endfor %} + type: OS::TripleO::NodeExtraConfigPost properties: - servers: {get_param: servers} - input_values: - update_identifier: {get_param: DeployIdentifier} + servers: {get_param: [servers, {{role.name}}]} - # Note, this should come last, so use depends_on to ensure - # this is created after any other resources. - {{role.name}}ExtraConfigPost: + # The {{role.name}}PostConfig steps are in charge of + # quiescing all services, i.e. in the Controller case, + # we should run a full service reload. + {{role.name}}PostConfig: + type: OS::TripleO::Tasks::{{role.name}}PostConfig depends_on: {% for dep in roles %} - - {{dep.name}}PostConfig + - {{dep.name}}ExtraConfigPost {% endfor %} - type: OS::TripleO::NodeExtraConfigPost properties: - servers: {get_param: [servers, {{role.name}}]} + servers: {get_param: servers} + input_values: + update_identifier: {get_param: DeployIdentifier} + {% endfor %} diff --git a/docker/docker-toool b/docker/docker-toool index 36aba4a7..0b87ea92 100755 --- a/docker/docker-toool +++ b/docker/docker-toool @@ -75,6 +75,9 @@ def parse_opts(argv): def docker_arg_map(key, value): value = str(value).encode('ascii', 'ignore') + if len(value) == 0: + return '' + return { 'environment': "--env=%s" % value, # 'image': value, diff --git a/docker/services/manila-api.yaml b/docker/services/manila-api.yaml new file mode 100644 index 00000000..47d0f579 --- /dev/null +++ b/docker/services/manila-api.yaml @@ -0,0 +1,112 @@ +heat_template_version: pike + +description: > + OpenStack containerized Manila API service + +parameters: + DockerNamespace: + description: namespace + default: 'tripleoupstream' + type: string + DockerManilaApiImage: + description: image + default: 'centos-binary-manila-api:latest' + type: string + DockerManilaConfigImage: + description: image + default: 'centos-binary-manila-base:latest' + EndpointMap: + default: {} + description: Mapping of service endpoint -> protocol. Typically set + via parameter_defaults in the resource registry. + type: json + ServiceNetMap: + default: {} + description: Mapping of service_name -> network name. Typically set + via parameter_defaults in the resource registry. This + mapping overrides those in ServiceNetMapDefaults. + type: json + DefaultPasswords: + default: {} + type: json + RoleName: + default: '' + description: Role name on which the service is applied + type: string + RoleParameters: + default: {} + description: Parameters specific to the role + type: json + +resources: + + ManilaApiPuppetBase: + type: ../../puppet/services/manila-api.yaml + properties: + EndpointMap: {get_param: EndpointMap} + ServiceNetMap: {get_param: ServiceNetMap} + DefaultPasswords: {get_param: DefaultPasswords} + +outputs: + role_data: + description: Role data for the Manila API role. + value: + service_name: {get_attr: [ManilaApiPuppetBase, role_data, service_name]} + config_settings: {get_attr: [ManilaApiPuppetBase, role_data, config_settings]} + step_config: &step_config + {get_attr: [ManilaApiPuppetBase, role_data, step_config]} + service_config_settings: {get_attr: [ManilaApiPuppetBase, role_data, service_config_settings]} + # BEGIN DOCKER SETTINGS # + puppet_config: + config_volume: manila + puppet_tags: manila_config,manila_api_paste_ini + step_config: *step_config + config_image: + list_join: + - '/' + - [ {get_param: DockerNamespace}, {get_param: DockerManilaConfigImage} ] + kolla_config: + /var/lib/kolla/config_files/manila_api.json: + command: /usr/bin/manila-api --config-file /usr/share/manila/manila-dist.conf --config-file /etc/manila/manila.conf + permissions: + - path: /var/log/manila + owner: manila:manila + recurse: true + docker_config: + step_3: + manila_api_db_sync: + user: root + image: &manila_api_image + list_join: + - '/' + - [ {get_param: DockerNamespace}, {get_param: DockerManilaApiImage} ] + net: host + detach: false + volumes: + - /var/lib/config-data/manila/etc/manila/:/etc/manila:ro + - /etc/hosts:/etc/hosts:ro + - /etc/localtime:/etc/localtime:ro + - logs:/var/log + command: "/usr/bin/bootstrap_host_exec manila_api su manila -s /bin/bash -c '/usr/bin/manila-manage db sync'" + step_4: + manila_api: + image: *manila_api_image + net: host + restart: always + volumes: + - /var/lib/kolla/config_files/manila_api.json:/var/lib/kolla/config_files/config.json:ro + - /var/lib/config-data/manila/etc/manila/:/etc/manila/:ro + - /etc/hosts:/etc/hosts:ro + - /etc/localtime:/etc/localtime:ro + - /var/log/containers/manila:/var/log/manila + environment: + - KOLLA_CONFIG_STRATEGY=COPY_ALWAYS + host_prep_tasks: + - name: Create persistent manila logs directory + file: + path: /var/log/containers/manila + state: directory + upgrade_tasks: + - name: Stop and disable manila_api service + tags: step2 + service: name=openstack-manila-api state=stopped enabled=no diff --git a/docker/services/pacemaker/haproxy.yaml b/docker/services/pacemaker/haproxy.yaml index ae19652e..7557afd6 100644 --- a/docker/services/pacemaker/haproxy.yaml +++ b/docker/services/pacemaker/haproxy.yaml @@ -60,11 +60,7 @@ outputs: list_join: - '/' - [ {get_param: DockerNamespace}, {get_param: DockerHAProxyImage} ] - step_config: - list_join: - - "\n" - - - &noop_pcmk "['pcmk_bundle', 'pcmk_resource', 'pcmk_property', 'pcmk_constraint', 'pcmk_resource_default'].each |String $val| { noop_resource($val) }" - - 'include ::tripleo::profile::pacemaker::haproxy_bundle' + step_config: "" service_config_settings: {get_attr: [HAProxyBase, role_data, service_config_settings]} # BEGIN DOCKER SETTINGS puppet_config: @@ -74,8 +70,8 @@ outputs: list_join: - "\n" - - "exec {'wait-for-settle': command => '/bin/true' }" - - &noop_firewall "class tripleo::firewall(){}; define tripleo::firewall::rule( $port = undef, $dport = undef, $sport = undef, $proto = undef, $action = undef, $state = undef, $source = undef, $iniface = undef, $chain = undef, $destination = undef, $extras = undef){}" - - *noop_pcmk + - "class tripleo::firewall(){}; define tripleo::firewall::rule( $port = undef, $dport = undef, $sport = undef, $proto = undef, $action = undef, $state = undef, $source = undef, $iniface = undef, $chain = undef, $destination = undef, $extras = undef){}" + - "['pcmk_bundle', 'pcmk_resource', 'pcmk_property', 'pcmk_constraint', 'pcmk_resource_default'].each |String $val| { noop_resource($val) }" - 'include ::tripleo::profile::pacemaker::haproxy_bundle' config_image: *haproxy_image kolla_config: @@ -88,6 +84,7 @@ outputs: detach: false net: host user: root + privileged: true command: - '/bin/bash' - '-c' @@ -98,14 +95,20 @@ outputs: - - "cp -a /tmp/puppet-etc/* /etc/puppet; echo '{\"step\": 2}' > /etc/puppet/hieradata/docker.json" - "FACTER_uuid=docker puppet apply --tags file,file_line,concat,augeas,TAGS -v -e 'CONFIG'" params: - TAGS: 'pacemaker::resource::bundle,pacemaker::property,pacemaker::resource::ip,pacemaker::resource::ocf,pacemaker::constraint::order,pacemaker::constraint::colocation' + TAGS: 'tripleo::firewall::rule,pacemaker::resource::bundle,pacemaker::property,pacemaker::resource::ip,pacemaker::resource::ocf,pacemaker::constraint::order,pacemaker::constraint::colocation' CONFIG: list_join: - ';' - - - *noop_firewall - - 'include ::tripleo::profile::base::pacemaker;include ::tripleo::profile::pacemaker::haproxy_bundle' + - - 'include ::tripleo::profile::base::pacemaker' + - 'include ::tripleo::profile::pacemaker::haproxy_bundle' image: *haproxy_image volumes: + # puppet saves iptables rules in /etc/sysconfig + - /etc/sysconfig:/etc/sysconfig:rw + # saving rules require accessing /usr/libexec/iptables/iptables.init, just bind-mount + # the necessary bit and prevent systemd to try to reload the service in the container + - /usr/libexec/iptables:/usr/libexec/iptables:ro + - /usr/libexec/initscripts/legacy-actions:/usr/libexec/initscripts/legacy-actions:ro - /etc/hosts:/etc/hosts:ro - /etc/localtime:/etc/localtime:ro - /etc/puppet:/tmp/puppet-etc:ro diff --git a/docker/services/sahara-api.yaml b/docker/services/sahara-api.yaml new file mode 100644 index 00000000..10670796 --- /dev/null +++ b/docker/services/sahara-api.yaml @@ -0,0 +1,119 @@ +heat_template_version: pike + +description: > + OpenStack Sahara service configured with Puppet + +parameters: + DockerNamespace: + description: namespace + default: 'tripleoupstream' + type: string + DockerSaharaApiImage: + description: image + default: 'centos-binary-sahara-api:latest' + type: string + EndpointMap: + default: {} + description: Mapping of service endpoint -> protocol. Typically set + via parameter_defaults in the resource registry. + type: json + ServiceNetMap: + default: {} + description: Mapping of service_name -> network name. Typically set + via parameter_defaults in the resource registry. This + mapping overrides those in ServiceNetMapDefaults. + type: json + DefaultPasswords: + default: {} + type: json + RoleName: + default: '' + description: Role name on which the service is applied + type: string + RoleParameters: + default: {} + description: Parameters specific to the role + type: json + +resources: + + ContainersCommon: + type: ./containers-common.yaml + + SaharaApiPuppetBase: + type: ../../puppet/services/sahara-api.yaml + properties: + EndpointMap: {get_param: EndpointMap} + ServiceNetMap: {get_param: ServiceNetMap} + DefaultPasswords: {get_param: DefaultPasswords} + +outputs: + role_data: + description: Role data for the Sahara API role. + value: + service_name: {get_attr: [SaharaApiPuppetBase, role_data, service_name]} + config_settings: + map_merge: + - get_attr: [SaharaApiPuppetBase, role_data, config_settings] + - sahara::sync_db: false + step_config: &step_config + get_attr: [SaharaApiPuppetBase, role_data, step_config] + service_config_settings: {get_attr: [SaharaApiPuppetBase, role_data, service_config_settings]} + # BEGIN DOCKER SETTINGS # + puppet_config: + config_volume: sahara + puppet_tags: sahara_api_paste_ini,sahara_cluster_template,sahara_config,sahara_node_group_template + step_config: *step_config + config_image: &sahara_image + list_join: + - '/' + - [ {get_param: DockerNamespace}, {get_param: DockerSaharaApiImage} ] + kolla_config: + /var/lib/kolla/config_files/sahara-api.json: + command: /usr/bin/sahara-api --config-file /etc/sahara/sahara.conf + permissions: + - path: /var/lib/sahara + owner: sahara:sahara + recurse: true + - path: /var/log/sahara + owner: sahara:sahara + recurse: true + docker_config: + step_3: + sahara_db_sync: + image: *sahara_image + net: host + privileged: false + detach: false + volumes: &sahara_volumes + list_concat: + - {get_attr: [ContainersCommon, volumes]} + - + - /var/lib/kolla/config_files/sahara-api.json:/var/lib/kolla/config_files/config.json + - /var/lib/config-data/sahara/etc/sahara/:/etc/sahara/:ro + - /lib/modules:/lib/modules:ro + - /var/lib/sahara:/var/lib/sahara + - /var/log/containers/sahara:/var/log/sahara + command: "/usr/bin/bootstrap_host_exec sahara_api su sahara -s /bin/bash -c 'sahara-db-manage --config-file /etc/sahara/sahara.conf upgrade head'" + step_4: + sahara_api: + image: *sahara_image + net: host + privileged: false + restart: always + volumes: *sahara_volumes + environment: + - KOLLA_CONFIG_STRATEGY=COPY_ALWAYS + host_prep_tasks: + - name: create /var/lib/sahara + file: + path: /var/lib/sahara + state: directory + - name: create persistent sahara logs directory + file: + path: /var/log/containers/sahara + state: directory + upgrade_tasks: + - name: Stop and disable sahara_api service + tags: step2 + service: name=openstack-sahara-api state=stopped enabled=no diff --git a/docker/services/sahara-engine.yaml b/docker/services/sahara-engine.yaml new file mode 100644 index 00000000..41b5790b --- /dev/null +++ b/docker/services/sahara-engine.yaml @@ -0,0 +1,110 @@ +heat_template_version: pike + +description: > + OpenStack Sahara service configured with Puppet + +parameters: + DockerNamespace: + description: namespace + default: 'tripleoupstream' + type: string + DockerSaharaEngineImage: + description: image + default: 'centos-binary-sahara-engine:latest' + type: string + EndpointMap: + default: {} + description: Mapping of service endpoint -> protocol. Typically set + via parameter_defaults in the resource registry. + type: json + ServiceNetMap: + default: {} + description: Mapping of service_name -> network name. Typically set + via parameter_defaults in the resource registry. This + mapping overrides those in ServiceNetMapDefaults. + type: json + DefaultPasswords: + default: {} + type: json + RoleName: + default: '' + description: Role name on which the service is applied + type: string + RoleParameters: + default: {} + description: Parameters specific to the role + type: json + +resources: + + ContainersCommon: + type: ./containers-common.yaml + + SaharaEnginePuppetBase: + type: ../../puppet/services/sahara-engine.yaml + properties: + EndpointMap: {get_param: EndpointMap} + ServiceNetMap: {get_param: ServiceNetMap} + DefaultPasswords: {get_param: DefaultPasswords} + +outputs: + role_data: + description: Role data for the Sahara Engine role. + value: + service_name: {get_attr: [SaharaEnginePuppetBase, role_data, service_name]} + config_settings: + map_merge: + - get_attr: [SaharaEnginePuppetBase, role_data, config_settings] + - sahara::sync_db: false + step_config: &step_config + get_attr: [SaharaEnginePuppetBase, role_data, step_config] + service_config_settings: {get_attr: [SaharaEnginePuppetBase, role_data, service_config_settings]} + # BEGIN DOCKER SETTINGS # + puppet_config: + config_volume: sahara + puppet_tags: sahara_engine_paste_ini,sahara_cluster_template,sahara_config,sahara_node_group_template + step_config: *step_config + config_image: &sahara_image + list_join: + - '/' + - [ {get_param: DockerNamespace}, {get_param: DockerSaharaEngineImage} ] + kolla_config: + /var/lib/kolla/config_files/sahara-engine.json: + command: /usr/bin/sahara-engine --config-file /etc/sahara/sahara.conf + permissions: + - path: /var/lib/sahara + owner: sahara:sahara + recurse: true + - path: /var/log/sahara + owner: sahara:sahara + recurse: true + docker_config: + step_4: + sahara_engine: + image: *sahara_image + net: host + privileged: false + restart: always + volumes: &sahara_volumes + list_concat: + - {get_attr: [ContainersCommon, volumes]} + - + - /var/lib/kolla/config_files/sahara-engine.json:/var/lib/kolla/config_files/config.json + - /var/lib/config-data/sahara/etc/sahara/:/etc/sahara/:ro + - /var/lib/sahara:/var/lib/sahara + - /var/log/containers/sahara:/var/log/sahara + environment: + - KOLLA_CONFIG_STRATEGY=COPY_ALWAYS + host_prep_tasks: + - name: create /var/lib/sahara + file: + path: /var/lib/sahara + state: directory + - name: create persistent sahara logs directory + file: + path: /var/log/containers/sahara + state: directory + upgrade_tasks: + - name: Stop and disable sahara_engine service + tags: step2 + service: name=openstack-sahara-engine state=stopped enabled=no diff --git a/docker/services/sensu-client.yaml b/docker/services/sensu-client.yaml new file mode 100644 index 00000000..e6bdf155 --- /dev/null +++ b/docker/services/sensu-client.yaml @@ -0,0 +1,131 @@ +heat_template_version: pike + +description: > + Containerized Sensu client service + +parameters: + DockerNamespace: + description: namespace + default: 'tripleoupstream' + type: string + DockerSensuClientImage: + description: image + default: 'centos-binary-sensu-client:latest' + type: string + EndpointMap: + default: {} + description: Mapping of service endpoint -> protocol. Typically set + via parameter_defaults in the resource registry. + type: json + ServiceNetMap: + default: {} + description: Mapping of service_name -> network name. Typically set + via parameter_defaults in the resource registry. This + mapping overrides those in ServiceNetMapDefaults. + type: json + DefaultPasswords: + default: {} + type: json + RoleName: + default: '' + description: Role name on which the service is applied + type: string + RoleParameters: + default: {} + description: Parameters specific to the role + type: json + SensuDockerCheckCommand: + type: string + default: | + for i in $(docker ps --format '{{.ID}}'); do + if result=$(docker inspect --format='{{.State.Health.Status}}' $i 2>/dev/null); then + if [ "$result" != 'healthy' ]; then + echo "$(docker inspect --format='{{.Name}}' $i) ($i): $(docker inspect --format='{{json .State}}' $i)" && exit 2; + fi + fi + done + SensuDockerCheckInterval: + type: number + description: The frequency in seconds the docker health check is executed. + default: 10 + SensuDockerCheckHandlers: + default: [] + description: The Sensu event handler to use for events + created by the docker health check. + type: comma_delimited_list + SensuDockerCheckOccurrences: + type: number + description: The number of event occurrences before sensu-plugin-aware handler should take action. + default: 3 + SensuDockerCheckRefresh: + type: number + description: The number of seconds sensu-plugin-aware handlers should wait before taking second action. + default: 90 + +resources: + + ContainersCommon: + type: ./containers-common.yaml + + SensuClientBase: + type: ../../puppet/services/monitoring/sensu-client.yaml + properties: + EndpointMap: {get_param: EndpointMap} + ServiceNetMap: {get_param: ServiceNetMap} + DefaultPasswords: {get_param: DefaultPasswords} + +outputs: + role_data: + description: Role data for the Sensu client role. + value: + service_name: {get_attr: [SensuClientBase, role_data, service_name]} + config_settings: + map_merge: + - get_attr: [SensuClientBase, role_data, config_settings] + - sensu::checks: + check-docker-health: + standalone: true + command: {get_param: SensuDockerCheckCommand} + interval: {get_param: SensuDockerCheckInterval} + handlers: {get_param: SensuDockerCheckHandlers} + occurrences: {get_param: SensuDockerCheckOccurrences} + refresh: {get_param: SensuDockerCheckRefresh} + step_config: &step_config + get_attr: [SensuClientBase, role_data, step_config] + service_config_settings: {get_attr: [SensuClientBase, role_data, service_config_settings]} + # BEGIN DOCKER SETTINGS + puppet_config: + config_volume: sensu + puppet_tags: sensu_rabbitmq_config,sensu_client_config,sensu_check_config,sensu_check + step_config: *step_config + config_image: &sensu_client_image + list_join: + - '/' + - [ {get_param: DockerNamespace}, {get_param: DockerSensuClientImage} ] + kolla_config: + /var/lib/kolla/config_files/sensu-client.json: + command: /usr/bin/sensu-client -d /etc/sensu/conf.d/ + docker_config: + step_3: + sensu_client: + image: *sensu_client_image + net: host + privileged: true + # NOTE(mmagr) kolla image changes the user to 'sensu', we need it + # to be root have rw permission to docker.sock to run successfully + # "docker inspect" command + user: root + restart: always + volumes: + list_concat: + - {get_attr: [ContainersCommon, volumes]} + - + - /var/run/docker.sock:/var/run/docker.sock:rw + - /var/lib/kolla/config_files/sensu-client.json:/var/lib/kolla/config_files/config.json:ro + - /var/lib/config-data/sensu/etc/sensu/:/etc/sensu/:ro + environment: + - KOLLA_CONFIG_STRATEGY=COPY_ALWAYS + upgrade_tasks: + - name: Stop and disable sensu-client service + tags: step2 + service: name=sensu-client.service state=stopped enabled=no diff --git a/docker/services/swift-ringbuilder.yaml b/docker/services/swift-ringbuilder.yaml index bfd445d0..075d8d7c 100644 --- a/docker/services/swift-ringbuilder.yaml +++ b/docker/services/swift-ringbuilder.yaml @@ -58,6 +58,14 @@ parameters: default: true description: 'Use a local directory for Swift storage services when building rings' type: boolean + SwiftRingGetTempurl: + default: '' + description: A temporary Swift URL to download rings from. + type: string + SwiftRingPutTempurl: + default: '' + description: A temporary Swift URL to upload rings to. + type: string resources: @@ -75,14 +83,17 @@ outputs: description: Role data for Swift Ringbuilder configuration in containers. value: service_name: {get_attr: [SwiftRingbuilderBase, role_data, service_name]} - config_settings: {get_attr: [SwiftRingbuilderBase, role_data, config_settings]} + config_settings: + map_merge: + - {get_attr: [SwiftRingbuilderBase, role_data, config_settings]} + - tripleo::profile::base::swift::ringbuilder:skip_consistency_check: true step_config: &step_config get_attr: [SwiftRingbuilderBase, role_data, step_config] service_config_settings: {get_attr: [SwiftRingbuilderBase, role_data, service_config_settings]} # BEGIN DOCKER SETTINGS puppet_config: config_volume: 'swift' - puppet_tags: exec,ring_object_device,swift::ringbuilder::create,tripleo::profile::base::swift::add_devices,swift::ringbuilder::rebalance + puppet_tags: exec,fetch_swift_ring_tarball,extract_swift_ring_tarball,ring_object_device,swift::ringbuilder::create,tripleo::profile::base::swift::add_devices,swift::ringbuilder::rebalance,create_swift_ring_tarball,upload_swift_ring_tarball step_config: *step_config config_image: list_join: diff --git a/docker/services/swift-storage.yaml b/docker/services/swift-storage.yaml index 017fb123..55aea208 100644 --- a/docker/services/swift-storage.yaml +++ b/docker/services/swift-storage.yaml @@ -46,6 +46,11 @@ parameters: via parameter_defaults in the resource registry. This mapping overrides those in ServiceNetMapDefaults. type: json + SwiftRawDisks: + default: {} + description: 'A hash of additional raw devices to use as Swift backend (eg. {sdb: {}})' + type: json + resources: @@ -66,7 +71,11 @@ outputs: description: Role data for the swift storage services. value: service_name: {get_attr: [SwiftStorageBase, role_data, service_name]} - config_settings: {get_attr: [SwiftStorageBase, role_data, config_settings]} + config_settings: + map_merge: + - {get_attr: [SwiftStorageBase, role_data, config_settings]} + # FIXME (cschwede): re-enable this once checks works inside containers + - swift::storage::all::mount_check: false step_config: &step_config get_attr: [SwiftStorageBase, role_data, step_config] service_config_settings: {get_attr: [SwiftStorageBase, role_data, service_config_settings]} @@ -348,6 +357,18 @@ outputs: with_items: - /var/log/containers/swift - /srv/node + - name: Format and mount devices defined in SwiftRawDisks + mount: + name: /srv/node/{{ item }} + src: /dev/{{ item }} + fstype: xfs + opts: noatime + state: mounted + with_items: + - repeat: + template: 'DEVICE' + for_each: + DEVICE: {get_param: SwiftRawDisks} upgrade_tasks: - name: Stop and disable swift storage services tags: step2 diff --git a/environments/docker.yaml b/environments/docker.yaml index 02cc6a0a..4151c0d4 100644 --- a/environments/docker.yaml +++ b/environments/docker.yaml @@ -27,7 +27,6 @@ resource_registry: OS::TripleO::Services::NeutronDhcpAgent: ../docker/services/neutron-dhcp.yaml OS::TripleO::Services::NeutronL3Agent: ../docker/services/neutron-l3.yaml OS::TripleO::Services::MySQL: ../docker/services/database/mysql.yaml - OS::TripleO::Services::HAProxy: ../docker/services/haproxy.yaml OS::TripleO::Services::RabbitMQ: ../docker/services/rabbitmq.yaml OS::TripleO::Services::MongoDb: ../docker/services/database/mongodb.yaml OS::TripleO::Services::Redis: ../docker/services/database/redis.yaml diff --git a/environments/enable-tls.yaml b/environments/enable-tls.yaml index 39ded654..481459cb 100644 --- a/environments/enable-tls.yaml +++ b/environments/enable-tls.yaml @@ -2,6 +2,7 @@ # For these values to take effect, one of the tls-endpoints-*.yaml environments # must also be used. parameter_defaults: + HorizonSecureCookies: True SSLCertificate: | The contents of your certificate go here SSLIntermediateCertificate: '' diff --git a/environments/network-isolation.j2.yaml b/environments/network-isolation.j2.yaml new file mode 100644 index 00000000..3ef9b275 --- /dev/null +++ b/environments/network-isolation.j2.yaml @@ -0,0 +1,37 @@ +{%- set primary_role = [roles[0]] -%} +{%- for role in roles -%} + {%- if 'primary' in role.tags and 'controller' in role.tags -%} + {%- set _ = primary_role.pop() -%} + {%- set _ = primary_role.append(role) -%} + {%- endif -%} +{%- endfor -%} +{%- set primary_role_name = primary_role[0].name -%} +# Enable the creation of Neutron networks for isolated Overcloud +# traffic and configure each role to assign ports (related +# to that role) on these networks. +# primary role is: {{primary_role_name}} +resource_registry: + # networks as defined in network_data.yaml + {%- for network in networks if network.enabled|default(true) %} + OS::TripleO::Network::{{network.name}}: ../network/{{network.name.lower()}}.yaml + {%- endfor %} + + # Port assignments for the VIPs + {%- for network in networks if network.vip %} + OS::TripleO::Network::Ports::{{network.name}}VipPort: ../network/ports/{{network.name_lower|default(network.name.lower())}}.yaml + {%- endfor %} + OS::TripleO::Network::Ports::RedisVipPort: ../network/ports/vip.yaml + + + OS::TripleO::{{primary_role_name}}::Ports::RedisVipPort: ../network/ports/vip.yaml + +{%- for role in roles %} + # Port assignments for the {{role.name}} + {%- for network in networks %} + {%- if network.name in role.networks|default([]) and network.enabled|default(true) %} + OS::TripleO::{{role.name}}::Ports::{{network.name}}Port: ../network/ports/{{network.name_lower|default(network.name.lower())}}.yaml + {%- else %} + OS::TripleO::{{role.name}}::Ports::{{network.name}}Port: ../network/ports/noop.yaml + {%- endif %} + {%- endfor %} +{%- endfor %} diff --git a/environments/network-isolation.yaml b/environments/network-isolation.yaml deleted file mode 100644 index a6b4b8ae..00000000 --- a/environments/network-isolation.yaml +++ /dev/null @@ -1,59 +0,0 @@ -# Enable the creation of Neutron networks for isolated Overcloud -# traffic and configure each role to assign ports (related -# to that role) on these networks. -resource_registry: - OS::TripleO::Network::External: ../network/external.yaml - OS::TripleO::Network::InternalApi: ../network/internal_api.yaml - OS::TripleO::Network::StorageMgmt: ../network/storage_mgmt.yaml - OS::TripleO::Network::Storage: ../network/storage.yaml - OS::TripleO::Network::Tenant: ../network/tenant.yaml - # Management network is optional and disabled by default. - # To enable it, include environments/network-management.yaml - #OS::TripleO::Network::Management: ../network/management.yaml - - # Port assignments for the VIPs - OS::TripleO::Network::Ports::ExternalVipPort: ../network/ports/external.yaml - OS::TripleO::Network::Ports::InternalApiVipPort: ../network/ports/internal_api.yaml - OS::TripleO::Network::Ports::StorageVipPort: ../network/ports/storage.yaml - OS::TripleO::Network::Ports::StorageMgmtVipPort: ../network/ports/storage_mgmt.yaml - OS::TripleO::Network::Ports::RedisVipPort: ../network/ports/vip.yaml - - # Port assignments for the controller role - OS::TripleO::Controller::Ports::ExternalPort: ../network/ports/external.yaml - OS::TripleO::Controller::Ports::InternalApiPort: ../network/ports/internal_api.yaml - OS::TripleO::Controller::Ports::StoragePort: ../network/ports/storage.yaml - OS::TripleO::Controller::Ports::StorageMgmtPort: ../network/ports/storage_mgmt.yaml - OS::TripleO::Controller::Ports::TenantPort: ../network/ports/tenant.yaml - #OS::TripleO::Controller::Ports::ManagementPort: ../network/ports/management.yaml - - # Port assignments for the compute role - OS::TripleO::Compute::Ports::ExternalPort: ../network/ports/noop.yaml - OS::TripleO::Compute::Ports::InternalApiPort: ../network/ports/internal_api.yaml - OS::TripleO::Compute::Ports::StoragePort: ../network/ports/storage.yaml - OS::TripleO::Compute::Ports::StorageMgmtPort: ../network/ports/noop.yaml - OS::TripleO::Compute::Ports::TenantPort: ../network/ports/tenant.yaml - #OS::TripleO::Compute::Ports::ManagementPort: ../network/ports/management.yaml - - # Port assignments for the ceph storage role - OS::TripleO::CephStorage::Ports::ExternalPort: ../network/ports/noop.yaml - OS::TripleO::CephStorage::Ports::InternalApiPort: ../network/ports/noop.yaml - OS::TripleO::CephStorage::Ports::StoragePort: ../network/ports/storage.yaml - OS::TripleO::CephStorage::Ports::StorageMgmtPort: ../network/ports/storage_mgmt.yaml - OS::TripleO::CephStorage::Ports::TenantPort: ../network/ports/noop.yaml - #OS::TripleO::CephStorage::Ports::ManagementPort: ../network/ports/management.yaml - - # Port assignments for the swift storage role - OS::TripleO::SwiftStorage::Ports::ExternalPort: ../network/ports/noop.yaml - OS::TripleO::SwiftStorage::Ports::InternalApiPort: ../network/ports/internal_api.yaml - OS::TripleO::SwiftStorage::Ports::StoragePort: ../network/ports/storage.yaml - OS::TripleO::SwiftStorage::Ports::StorageMgmtPort: ../network/ports/storage_mgmt.yaml - OS::TripleO::SwiftStorage::Ports::TenantPort: ../network/ports/noop.yaml - #OS::TripleO::SwiftStorage::Ports::ManagementPort: ../network/ports/management.yaml - - # Port assignments for the block storage role - OS::TripleO::BlockStorage::Ports::ExternalPort: ../network/ports/noop.yaml - OS::TripleO::BlockStorage::Ports::InternalApiPort: ../network/ports/internal_api.yaml - OS::TripleO::BlockStorage::Ports::StoragePort: ../network/ports/storage.yaml - OS::TripleO::BlockStorage::Ports::StorageMgmtPort: ../network/ports/storage_mgmt.yaml - OS::TripleO::BlockStorage::Ports::TenantPort: ../network/ports/noop.yaml - #OS::TripleO::BlockStorage::Ports::ManagementPort: ../network/ports/management.yaml diff --git a/environments/services-docker/manila.yaml b/environments/services-docker/manila.yaml new file mode 100644 index 00000000..6f7608c1 --- /dev/null +++ b/environments/services-docker/manila.yaml @@ -0,0 +1,2 @@ +resource_registry: + OS::TripleO::Services::ManilaApi: ../../docker/services/manila-api.yaml diff --git a/environments/services-docker/sahara.yaml b/environments/services-docker/sahara.yaml new file mode 100644 index 00000000..d0bf9fe1 --- /dev/null +++ b/environments/services-docker/sahara.yaml @@ -0,0 +1,3 @@ +resource_registry: + OS::TripleO::Services::SaharaApi: ../../docker/services/sahara-api.yaml + OS::TripleO::Services::SaharaEngine: ../../docker/services/sahara-engine.yaml diff --git a/environments/services-docker/sensu-client.yaml b/environments/services-docker/sensu-client.yaml new file mode 100644 index 00000000..c03104d2 --- /dev/null +++ b/environments/services-docker/sensu-client.yaml @@ -0,0 +1,3 @@ + +resource_registry: + OS::TripleO::Services::SensuClient: ../../docker/services/sensu-client.yaml diff --git a/environments/tls-everywhere-endpoints-dns.yaml b/environments/tls-everywhere-endpoints-dns.yaml index 865ed4c3..3f1bd04e 100644 --- a/environments/tls-everywhere-endpoints-dns.yaml +++ b/environments/tls-everywhere-endpoints-dns.yaml @@ -72,8 +72,8 @@ parameter_defaults: IronicAdmin: {protocol: 'https', port: '6385', host: 'CLOUDNAME'} IronicInternal: {protocol: 'https', port: '6385', host: 'CLOUDNAME'} IronicPublic: {protocol: 'https', port: '13385', host: 'CLOUDNAME'} - IronicInspectorAdmin: {protocol: 'http', port: '5050', host: 'CLOUDNAME'} - IronicInspectorInternal: {protocol: 'http', port: '5050', host: 'CLOUDNAME'} + IronicInspectorAdmin: {protocol: 'https', port: '5050', host: 'CLOUDNAME'} + IronicInspectorInternal: {protocol: 'https', port: '5050', host: 'CLOUDNAME'} IronicInspectorPublic: {protocol: 'https', port: '13050', host: 'CLOUDNAME'} KeystoneAdmin: {protocol: 'https', port: '35357', host: 'CLOUDNAME'} KeystoneInternal: {protocol: 'https', port: '5000', host: 'CLOUDNAME'} diff --git a/extraconfig/tasks/post_puppet_pacemaker.j2.yaml b/extraconfig/tasks/post_puppet_pacemaker.j2.yaml index 7fc258d6..6bf5afb0 100644 --- a/extraconfig/tasks/post_puppet_pacemaker.j2.yaml +++ b/extraconfig/tasks/post_puppet_pacemaker.j2.yaml @@ -10,8 +10,8 @@ parameters: resources: -{%- for role in roles -%} -{% if "controller" in role.tags %} +{%- for role in roles %} + {%- if 'controller' in role.tags %} {{role.name}}PostPuppetMaintenanceModeConfig: type: OS::Heat::SoftwareConfig properties: @@ -37,6 +37,6 @@ resources: properties: servers: {get_param: [servers, {{role.name}}]} input_values: {get_param: input_values} -{%- endif -%} -{% endfor %} + {%- endif %} +{%- endfor %} diff --git a/plan-samples/README.rst b/plan-samples/README.rst new file mode 100644 index 00000000..44b9d0cd --- /dev/null +++ b/plan-samples/README.rst @@ -0,0 +1,22 @@ +================================= +Samples for plan-environment.yaml +================================= + +The ``plan-environment.yaml`` file provides the details of the plan to be +deployed by TripleO. Along with the details of the heat environments and +parameters, it is also possible to provide workflow specific parameters to the +TripleO mistral workflows. A new section ``workflow_parameters`` has been +added to provide workflow specific parameters. This provides a clear +separation of heat environment parameters and the workflow only parameters. +These customized plan environment files can be provided as with ``-p`` option +to the ``openstack overcloud deploy`` and ``openstack overcloud plan create`` +commands. The sample format to provide the workflow specific parameters:: + + workflow_parameters: + tripleo.derive_params.v1.derive_parameters: + # DPDK Parameters + number_of_pmd_cpu_threads_per_numa_node: 2 + + +All the parameters specified under the workflow name will be passed as +``user_input`` to the workflow, while invoking from the tripleoclient.
\ No newline at end of file diff --git a/plan-samples/plan-environment-derived-params.yaml b/plan-samples/plan-environment-derived-params.yaml new file mode 100644 index 00000000..964e57d2 --- /dev/null +++ b/plan-samples/plan-environment-derived-params.yaml @@ -0,0 +1,35 @@ +version: 1.0 + +name: overcloud +description: > + Default Deployment plan +template: overcloud.yaml +environments: + - path: overcloud-resource-registry-puppet.yaml +workflow_parameters: + tripleo.derive_params.v1.derive_parameters: + ######### DPDK Parameters ######### + # Specifices the minimum number of CPU threads to be allocated for DPDK + # PMD threads. The actual allocation will be based on network config, if + # the a DPDK port is associated with a numa node, then this configuration + # will be used, else 0. + number_of_pmd_cpu_threads_per_numa_node: 4 + # Amount of memory to be configured as huge pages in percentage. Ouf the + # total available memory (excluding the NovaReservedHostMemory), the + # specified percentage of the remaining is configured as huge pages. + huge_page_allocation_percentage: 90 + ######### HCI Parameters ######### + hci_profile: default + hci_profile_config: + default: + average_guest_memory_size_in_mb: 2048 + average_guest_cpu_utilization_percentage: 50 + many_small_vms: + average_guest_memory_size_in_mb: 1024 + average_guest_cpu_utilization_percentage: 20 + few_large_vms: + average_guest_memory_size_in_mb: 4096 + average_guest_cpu_utilization_percentage: 80 + nfv_default: + average_guest_memory_size_in_mb: 8192 + average_guest_cpu_utilization_percentage: 90 diff --git a/puppet/blockstorage-role.yaml b/puppet/blockstorage-role.yaml index 60ddeb8a..25e509b5 100644 --- a/puppet/blockstorage-role.yaml +++ b/puppet/blockstorage-role.yaml @@ -466,6 +466,7 @@ resources: fqdn_tenant: {get_attr: [NetHostMap, value, tenant, fqdn]} fqdn_management: {get_attr: [NetHostMap, value, management, fqdn]} fqdn_ctlplane: {get_attr: [NetHostMap, value, ctlplane, fqdn]} + fqdn_external: {get_attr: [NetHostMap, value, external, fqdn]} # Resource for site-specific injection of root certificate NodeTLSCAData: diff --git a/puppet/cephstorage-role.yaml b/puppet/cephstorage-role.yaml index 9d30ab29..ca89be8a 100644 --- a/puppet/cephstorage-role.yaml +++ b/puppet/cephstorage-role.yaml @@ -471,6 +471,7 @@ resources: fqdn_tenant: {get_attr: [NetHostMap, value, tenant, fqdn]} fqdn_management: {get_attr: [NetHostMap, value, management, fqdn]} fqdn_ctlplane: {get_attr: [NetHostMap, value, ctlplane, fqdn]} + fqdn_external: {get_attr: [NetHostMap, value, external, fqdn]} # Resource for site-specific injection of root certificate NodeTLSCAData: diff --git a/puppet/compute-role.yaml b/puppet/compute-role.yaml index 06a31ec9..abfacd36 100644 --- a/puppet/compute-role.yaml +++ b/puppet/compute-role.yaml @@ -479,6 +479,7 @@ resources: fqdn_tenant: {get_attr: [NetHostMap, value, tenant, fqdn]} fqdn_management: {get_attr: [NetHostMap, value, management, fqdn]} fqdn_ctlplane: {get_attr: [NetHostMap, value, ctlplane, fqdn]} + fqdn_external: {get_attr: [NetHostMap, value, external, fqdn]} NovaComputeDeployment: type: OS::TripleO::SoftwareDeployment diff --git a/puppet/controller-role.yaml b/puppet/controller-role.yaml index cccfdef1..396eda8d 100644 --- a/puppet/controller-role.yaml +++ b/puppet/controller-role.yaml @@ -541,6 +541,7 @@ resources: fqdn_tenant: {get_attr: [NetHostMap, value, tenant, fqdn]} fqdn_management: {get_attr: [NetHostMap, value, management, fqdn]} fqdn_ctlplane: {get_attr: [NetHostMap, value, ctlplane, fqdn]} + fqdn_external: {get_attr: [NetHostMap, value, external, fqdn]} # Hook for site-specific additional pre-deployment config, e.g extra hieradata ControllerExtraConfigPre: diff --git a/puppet/objectstorage-role.yaml b/puppet/objectstorage-role.yaml index 19ea1b65..42b1a78a 100644 --- a/puppet/objectstorage-role.yaml +++ b/puppet/objectstorage-role.yaml @@ -451,6 +451,7 @@ resources: fqdn_tenant: {get_attr: [NetHostMap, value, tenant, fqdn]} fqdn_management: {get_attr: [NetHostMap, value, management, fqdn]} fqdn_ctlplane: {get_attr: [NetHostMap, value, ctlplane, fqdn]} + fqdn_external: {get_attr: [NetHostMap, value, external, fqdn]} SwiftStorageHieraDeploy: type: OS::Heat::StructuredDeployment diff --git a/puppet/puppet-steps.j2 b/puppet/puppet-steps.j2 index 360c633a..5567d65d 100644 --- a/puppet/puppet-steps.j2 +++ b/puppet/puppet-steps.j2 @@ -44,26 +44,31 @@ update_identifier: {get_param: DeployIdentifier} {% endfor %} - {{role.name}}PostConfig: - type: OS::TripleO::Tasks::{{role.name}}PostConfig + # Note, this should be the last step to execute configuration changes. + # Ensure that all {{role.name}}ExtraConfigPost steps are executed + # after all the previous deployment steps. + {{role.name}}ExtraConfigPost: depends_on: {% for dep in roles %} - {{dep.name}}Deployment_Step5 {% endfor %} + type: OS::TripleO::NodeExtraConfigPost properties: - servers: {get_param: servers} - input_values: - update_identifier: {get_param: DeployIdentifier} + servers: {get_param: [servers, {{role.name}}]} - # Note, this should come last, so use depends_on to ensure - # this is created after any other resources. - {{role.name}}ExtraConfigPost: + # The {{role.name}}PostConfig steps are in charge of + # quiescing all services, i.e. in the Controller case, + # we should run a full service reload. + {{role.name}}PostConfig: + type: OS::TripleO::Tasks::{{role.name}}PostConfig depends_on: {% for dep in roles %} - - {{dep.name}}PostConfig + - {{dep.name}}ExtraConfigPost {% endfor %} - type: OS::TripleO::NodeExtraConfigPost properties: - servers: {get_param: [servers, {{role.name}}]} + servers: {get_param: servers} + input_values: + update_identifier: {get_param: DeployIdentifier} + {% endfor %} diff --git a/puppet/role.role.j2.yaml b/puppet/role.role.j2.yaml index 7af90e24..409b0a33 100644 --- a/puppet/role.role.j2.yaml +++ b/puppet/role.role.j2.yaml @@ -493,6 +493,7 @@ resources: fqdn_tenant: {get_attr: [NetHostMap, value, tenant, fqdn]} fqdn_management: {get_attr: [NetHostMap, value, management, fqdn]} fqdn_ctlplane: {get_attr: [NetHostMap, value, ctlplane, fqdn]} + fqdn_external: {get_attr: [NetHostMap, value, external, fqdn]} # Resource for site-specific injection of root certificate NodeTLSCAData: diff --git a/puppet/services/cinder-backend-netapp.yaml b/puppet/services/cinder-backend-netapp.yaml index bddc8e1a..fbde4c0a 100644 --- a/puppet/services/cinder-backend-netapp.yaml +++ b/puppet/services/cinder-backend-netapp.yaml @@ -93,6 +93,12 @@ parameters: CinderNetappWebservicePath: type: string default: '/devmgr/v2' + CinderNetappNasSecureFileOperations: + type: string + default: 'false' + CinderNetappNasSecureFilePermissions: + type: string + default: 'false' # DEPRECATED options for compatibility with older versions CinderNetappEseriesHostType: type: string @@ -133,5 +139,7 @@ outputs: cinder::backend::netapp::netapp_storage_pools: {get_param: CinderNetappStoragePools} cinder::backend::netapp::netapp_host_type: {get_param: CinderNetappHostType} cinder::backend::netapp::netapp_webservice_path: {get_param: CinderNetappWebservicePath} + cinder::backend::netapp::nas_secure_file_operations: {get_param: CinderNetappNasSecureFileOperations} + cinder::backend::netapp::nas_secure_file_permissions: {get_param: CinderNetappNasSecureFilePermissions} step_config: | include ::tripleo::profile::base::cinder::volume diff --git a/puppet/services/cinder-volume.yaml b/puppet/services/cinder-volume.yaml index fe95222b..1f8c345d 100644 --- a/puppet/services/cinder-volume.yaml +++ b/puppet/services/cinder-volume.yaml @@ -40,6 +40,20 @@ parameters: NFS servers used by Cinder NFS backend. Effective when CinderEnableNfsBackend is true. type: comma_delimited_list + CinderNasSecureFileOperations: + default: false + description: > + Controls whether security enhanced NFS file operations are enabled. + Valid values are 'auto', 'true' or 'false'. Effective when + CinderEnableNfsBackend is true. + type: string + CinderNasSecureFilePermissions: + default: false + description: > + Controls whether security enhanced NFS file permissions are enabled. + Valid values are 'auto', 'true' or 'false'. Effective when + CinderEnableNfsBackend is true. + type: string CinderRbdPoolName: default: volumes type: string @@ -105,6 +119,8 @@ outputs: tripleo::profile::base::cinder::volume::cinder_enable_rbd_backend: {get_param: CinderEnableRbdBackend} tripleo::profile::base::cinder::volume::nfs::cinder_nfs_mount_options: {get_param: CinderNfsMountOptions} tripleo::profile::base::cinder::volume::nfs::cinder_nfs_servers: {get_param: CinderNfsServers} + tripleo::profile::base::cinder::volume::nfs::cinder_nas_secure_file_operations: {get_param: CinderNasSecureFileOperations} + tripleo::profile::base::cinder::volume::nfs::cinder_nas_secure_file_permissions: {get_param: CinderNasSecureFilePermissions} tripleo::profile::base::cinder::volume::iscsi::cinder_lvm_loop_device_size: {get_param: CinderLVMLoopDeviceSize} tripleo::profile::base::cinder::volume::iscsi::cinder_iscsi_helper: {get_param: CinderISCSIHelper} tripleo::profile::base::cinder::volume::iscsi::cinder_iscsi_protocol: {get_param: CinderISCSIProtocol} diff --git a/puppet/services/gnocchi-base.yaml b/puppet/services/gnocchi-base.yaml index f4067ef6..b4af7e85 100644 --- a/puppet/services/gnocchi-base.yaml +++ b/puppet/services/gnocchi-base.yaml @@ -34,6 +34,10 @@ parameters: default: 30 description: Delay between processing metrics. type: number + NumberOfStorageSacks: + default: 128 + description: Number of storage sacks to create. + type: number GnocchiPassword: description: The password for the gnocchi service and db account. type: string @@ -87,7 +91,11 @@ outputs: query: read_default_file: /etc/my.cnf.d/tripleo.cnf read_default_group: tripleo - gnocchi::db::sync::extra_opts: '' + gnocchi::db::sync::extra_opts: + str_replace: + template: " --sacks-number NUM_SACKS" + params: + NUM_SACKS: {get_param: NumberOfStorageSacks} gnocchi::storage::metric_processing_delay: {get_param: MetricProcessingDelay} gnocchi::storage::swift::swift_user: 'service:gnocchi' gnocchi::storage::swift::swift_auth_version: 3 diff --git a/puppet/services/horizon.yaml b/puppet/services/horizon.yaml index 93bced8b..092d0720 100644 --- a/puppet/services/horizon.yaml +++ b/puppet/services/horizon.yaml @@ -55,7 +55,7 @@ parameters: HorizonSecureCookies: description: Set CSRF_COOKIE_SECURE / SESSION_COOKIE_SECURE in Horizon type: boolean - default: true + default: false MemcachedIPv6: default: false description: Enable IPv6 features in Memcached. diff --git a/puppet/services/ironic-conductor.yaml b/puppet/services/ironic-conductor.yaml index b1676715..0e8c8e12 100644 --- a/puppet/services/ironic-conductor.yaml +++ b/puppet/services/ironic-conductor.yaml @@ -164,6 +164,12 @@ outputs: ironic::my_ip: {get_param: [ServiceNetMap, IronicNetwork]} ironic::pxe::common::http_port: {get_param: IronicIPXEPort} # Credentials to access other services + ironic::cinder::auth_url: {get_param: [EndpointMap, KeystoneInternal, uri_no_suffix]} + ironic::cinder::username: 'ironic' + ironic::cinder::password: {get_param: IronicPassword} + ironic::cinder::project_name: 'service' + ironic::cinder::user_domain_name: 'Default' + ironic::cinder::project_domain_name: 'Default' ironic::glance::auth_url: {get_param: [EndpointMap, KeystoneInternal, uri_no_suffix]} ironic::glance::username: 'ironic' ironic::glance::password: {get_param: IronicPassword} diff --git a/puppet/services/pacemaker_remote.yaml b/puppet/services/pacemaker_remote.yaml index 74aaf599..c49b0848 100644 --- a/puppet/services/pacemaker_remote.yaml +++ b/puppet/services/pacemaker_remote.yaml @@ -34,6 +34,42 @@ parameters: MonitoringSubscriptionPacemakerRemote: default: 'overcloud-pacemaker_remote' type: string + EnableFencing: + default: false + description: Whether to enable fencing in Pacemaker or not. + type: boolean + FencingConfig: + default: {} + description: | + Pacemaker fencing configuration. The JSON should have + the following structure: + { + "devices": [ + { + "agent": "AGENT_NAME", + "host_mac": "HOST_MAC_ADDRESS", + "params": {"PARAM_NAME": "PARAM_VALUE"} + } + ] + } + For instance: + { + "devices": [ + { + "agent": "fence_xvm", + "host_mac": "52:54:00:aa:bb:cc", + "params": { + "multicast_address": "225.0.0.12", + "port": "baremetal_0", + "manage_fw": true, + "manage_key_file": true, + "key_file": "/etc/fence_xvm.key", + "key_file_password": "abcdef" + } + } + ] + } + type: json PacemakerRemoteLoggingSource: type: json default: @@ -60,6 +96,8 @@ outputs: proto: 'tcp' dport: - 3121 + tripleo::fencing::config: {get_param: FencingConfig} + enable_fencing: {get_param: EnableFencing} tripleo::profile::base::pacemaker_remote::remote_authkey: {get_param: PacemakerRemoteAuthkey} step_config: | include ::tripleo::profile::base::pacemaker_remote diff --git a/releasenotes/notes/add-cinder-nas-secure-parameters-53f9d6a6e9bc129b.yaml b/releasenotes/notes/add-cinder-nas-secure-parameters-53f9d6a6e9bc129b.yaml new file mode 100644 index 00000000..73b9f9c9 --- /dev/null +++ b/releasenotes/notes/add-cinder-nas-secure-parameters-53f9d6a6e9bc129b.yaml @@ -0,0 +1,5 @@ +--- +features: + - Add parameters to control the Cinder NAS security settings associated + with the NFS and NetApp Cinder back ends. The settings are disabled + by default. diff --git a/releasenotes/notes/derive-params-custom-plan-env-3a810ff58a68e0ad.yaml b/releasenotes/notes/derive-params-custom-plan-env-3a810ff58a68e0ad.yaml new file mode 100644 index 00000000..d8fcbfec --- /dev/null +++ b/releasenotes/notes/derive-params-custom-plan-env-3a810ff58a68e0ad.yaml @@ -0,0 +1,4 @@ +--- +features: + - Added a custom plan-environment file for providing workflow specific + inputs for the derived parameters workflow. diff --git a/releasenotes/notes/num-storage-sacks-f640be5fcd374a6b.yaml b/releasenotes/notes/num-storage-sacks-f640be5fcd374a6b.yaml new file mode 100644 index 00000000..e5adb6a9 --- /dev/null +++ b/releasenotes/notes/num-storage-sacks-f640be5fcd374a6b.yaml @@ -0,0 +1,3 @@ +--- +features: + - Add support to configure number of sacks in gnocchi. diff --git a/roles/BlockStorage.yaml b/roles/BlockStorage.yaml index 6d77247c..b0117400 100644 --- a/roles/BlockStorage.yaml +++ b/roles/BlockStorage.yaml @@ -4,6 +4,10 @@ - name: BlockStorage description: | Cinder Block Storage node role + networks: + - InternalApi + - Storage + - StorageMgmt ServicesDefault: - OS::TripleO::Services::AuditD - OS::TripleO::Services::BlockStorageCinderVolume diff --git a/roles/CephStorage.yaml b/roles/CephStorage.yaml index d3de6bae..647c4d5a 100644 --- a/roles/CephStorage.yaml +++ b/roles/CephStorage.yaml @@ -4,6 +4,9 @@ - name: CephStorage description: | Ceph OSD Storage node role + networks: + - Storage + - StorageMgmt ServicesDefault: - OS::TripleO::Services::AuditD - OS::TripleO::Services::CACerts diff --git a/roles/Compute.yaml b/roles/Compute.yaml index c7e2b276..75a6f608 100644 --- a/roles/Compute.yaml +++ b/roles/Compute.yaml @@ -5,6 +5,10 @@ description: | Basic Compute Node role CountDefault: 1 + networks: + - InternalApi + - Tenant + - Storage HostnameFormatDefault: '%stackname%-novacompute-%index%' disable_upgrade_deployment: True ServicesDefault: diff --git a/roles/Controller.yaml b/roles/Controller.yaml index 36c46c8c..b0a13138 100644 --- a/roles/Controller.yaml +++ b/roles/Controller.yaml @@ -9,6 +9,12 @@ tags: - primary - controller + networks: + - External + - InternalApi + - Storage + - StorageMgmt + - Tenant HostnameFormatDefault: '%stackname%-controller-%index%' ServicesDefault: - OS::TripleO::Services::AodhApi diff --git a/roles/ControllerOpenstack.yaml b/roles/ControllerOpenstack.yaml index 2d1702e8..6cf2120e 100644 --- a/roles/ControllerOpenstack.yaml +++ b/roles/ControllerOpenstack.yaml @@ -9,6 +9,12 @@ tags: - primary - controller + networks: + - External + - InternalApi + - Storage + - StorageMgmt + - Tenant HostnameFormatDefault: '%stackname%-controller-%index%' ServicesDefault: - OS::TripleO::Services::AodhApi diff --git a/roles/Database.yaml b/roles/Database.yaml index 3ef751a7..75b26a8c 100644 --- a/roles/Database.yaml +++ b/roles/Database.yaml @@ -4,6 +4,8 @@ - name: Database description: | Standalone database role with the database being managed via Pacemaker + networks: + - InternalApi HostnameFormatDefault: '%stackname%-database-%index%' ServicesDefault: - OS::TripleO::Services::AuditD diff --git a/roles/Messaging.yaml b/roles/Messaging.yaml index cbef61ab..5b06063f 100644 --- a/roles/Messaging.yaml +++ b/roles/Messaging.yaml @@ -4,6 +4,8 @@ - name: Messaging description: | Standalone messaging role with RabbitMQ being managed via Pacemaker + networks: + - InternalApi HostnameFormatDefault: '%stackname%-messaging-%index%' ServicesDefault: - OS::TripleO::Services::AuditD diff --git a/roles/Networker.yaml b/roles/Networker.yaml index b393fa7b..a28eaa63 100644 --- a/roles/Networker.yaml +++ b/roles/Networker.yaml @@ -5,6 +5,8 @@ description: | Standalone networking role to run Neutron services their own. Includes Pacemaker integration via PacemakerRemote + networks: + - InternalApi HostnameFormatDefault: '%stackname%-networker-%index%' ServicesDefault: - OS::TripleO::Services::AuditD diff --git a/roles/ObjectStorage.yaml b/roles/ObjectStorage.yaml index 3741ca66..27dc1233 100644 --- a/roles/ObjectStorage.yaml +++ b/roles/ObjectStorage.yaml @@ -4,6 +4,10 @@ - name: ObjectStorage description: | Swift Object Storage node role + networks: + - InternalApi + - Storage + - StorageMgmt disable_upgrade_deployment: True ServicesDefault: - OS::TripleO::Services::AuditD diff --git a/roles/README.rst b/roles/README.rst index 6c742332..cd1fcb47 100644 --- a/roles/README.rst +++ b/roles/README.rst @@ -58,6 +58,10 @@ Role Options * description: (string) as few sentences describing the role and information pertaining to the usage of the role. + * networks: (list), optional list of networks which the role will have + access to when network isolation is enabled. The names should match + those defined in network_data.yaml. + Working with Roles ================== The tripleoclient provides a series of commands that can be used to view diff --git a/roles/Telemetry.yaml b/roles/Telemetry.yaml index 0f60364b..d23ab6e3 100644 --- a/roles/Telemetry.yaml +++ b/roles/Telemetry.yaml @@ -4,6 +4,8 @@ - name: Telemetry description: | Telemetry role that has all the telemetry services. + networks: + - InternalApi HostnameFormatDefault: '%stackname%-telemetry-%index%' ServicesDefault: - OS::TripleO::Services::AodhApi diff --git a/roles_data.yaml b/roles_data.yaml index a00f89bf..f96e5625 100644 --- a/roles_data.yaml +++ b/roles_data.yaml @@ -12,6 +12,12 @@ tags: - primary - controller + networks: + - External + - InternalApi + - Storage + - StorageMgmt + - Tenant HostnameFormatDefault: '%stackname%-controller-%index%' ServicesDefault: - OS::TripleO::Services::AodhApi @@ -129,6 +135,10 @@ description: | Basic Compute Node role CountDefault: 1 + networks: + - InternalApi + - Tenant + - Storage HostnameFormatDefault: '%stackname%-novacompute-%index%' disable_upgrade_deployment: True ServicesDefault: @@ -169,6 +179,10 @@ - name: BlockStorage description: | Cinder Block Storage node role + networks: + - InternalApi + - Storage + - StorageMgmt ServicesDefault: - OS::TripleO::Services::AuditD - OS::TripleO::Services::BlockStorageCinderVolume @@ -194,6 +208,10 @@ - name: ObjectStorage description: | Swift Object Storage node role + networks: + - InternalApi + - Storage + - StorageMgmt disable_upgrade_deployment: True ServicesDefault: - OS::TripleO::Services::AuditD @@ -220,6 +238,9 @@ - name: CephStorage description: | Ceph OSD Storage node role + networks: + - Storage + - StorageMgmt ServicesDefault: - OS::TripleO::Services::AuditD - OS::TripleO::Services::CACerts |