Add IPv6 Support to Isolated Networks

This change adds a new set of network templates with IPv6 subnets
that can be used instead of the existing IPv4 networks. Each network
can use either the IPv4 or IPv6 template, and the Neutron subnet will
be created with the specified IP version.

The default addresses used for the IPv6 networks use the fd00::/8
prefix for the internal isolated networks (this range is reserved
for private use similar to 10.0.0.0/8), and 2001:db8:fd00:1000::/64
is used as an example default for the External network
(2001:db8::/32 are the documentation addresses [RFC3849]), but this
would ordinarily be a globally addressable subnet. These
parameters may be overridden in an environment file.

This change will require updates to the OpenStack Puppet
Modules to support IPv6 addresses in some of the hieradata values.
Many of the OPM modules already have IPv6 support to support IPv6
deployments in Packstack, but some OPM packages that apply only to
Instack/TripleO deployments need to be updated.

IPv6 addresses used in URLs need to be surrounded by brackets in
order to differentiate IP address from port number. This change
adds a new output to the network/ports resources for
ip_address_uri, which is an IP address with brackets in the case
of IPv6, and a raw IP address without brackets for IPv4 ports.
This change also updates some URLs which are constructed in Heat.

This has been tested and problems were found with Puppet not
accepting IPv6 addresses. This is addressed in the latest Puppet.
Additional changes were required to make this work with Ceph.

IPv6 tunnel endpoints with Open vSwitch are not yet supported
(although support is coming soon), so this review leaves the
Tenant network as an isolated IPv4 network for the time being.

Change-Id: Ie7a742bdf1db533edda2998a53d28528f80ef8e2

25 files changed, 550 insertions, 0 deletions

diff --git a/network/ports/ctlplane_vip.yaml b/network/ports/ctlplane_vip.yaml
index 1d8b2916..5ac7d344 100644
--- a/network/ports/ctlplane_vip.yaml
+++ b/network/ports/ctlplane_vip.yaml
@@ -45,6 +45,9 @@ outputs:
   ip_address:
     description: Virtual IP network IP
     value: {get_attr: [VipPort, fixed_ips, 0, ip_address]}
+  ip_address_uri:
+    description: Virtual IP network IP (for compatibility with vip_v6.yaml)
+    value: {get_attr: [VipPort, fixed_ips, 0, ip_address]}
   ip_subnet:
     description: IP/Subnet CIDR for the ctlplane network.
     value:
diff --git a/network/ports/external.yaml b/network/ports/external.yaml
index df12cc80..c4f815fb 100644
--- a/network/ports/external.yaml
+++ b/network/ports/external.yaml
@@ -48,6 +48,9 @@ outputs:
   ip_address:
     description: external network IP
     value: {get_attr: [ExternalPort, fixed_ips, 0, ip_address]}
+  ip_address_uri:
+    description: external network IP (for compatibility with external_v6.yaml)
+    value: {get_attr: [ExternalPort, fixed_ips, 0, ip_address]}
   ip_subnet:
     description: IP/Subnet CIDR for the external network IP
     value:
diff --git a/network/ports/external_from_pool.yaml b/network/ports/external_from_pool.yaml
index 5e61683a..98f2aa35 100644
--- a/network/ports/external_from_pool.yaml
+++ b/network/ports/external_from_pool.yaml
@@ -33,6 +33,9 @@ outputs:
   ip_address:
     description: external network IP
     value: {get_param: [IPPool, {get_param: ExternalNetName}, {get_param: NodeIndex}]}
+  ip_address_uri:
+    description: external network IP (for compatibility with IPv6)
+    value: {get_param: [IPPool, {get_param: ExternalNetName}, {get_param: NodeIndex}]}
   ip_subnet:
     description: IP/Subnet CIDR for the external network IP
     value:
diff --git a/network/ports/external_v6.yaml b/network/ports/external_v6.yaml
new file mode 100644
index 00000000..522caaa0
--- /dev/null
+++ b/network/ports/external_v6.yaml
@@ -0,0 +1,68 @@
+heat_template_version: 2015-04-30
+
+description: >
+  Creates a port on the external network. The IP address will be chosen
+  automatically if FixedIPs is empty.
+
+parameters:
+  ExternalNetName:
+    description: Name of the external neutron network
+    default: external
+    type: string
+  PortName:
+    description: Name of the port
+    default: ''
+    type: string
+  ControlPlaneIP: # Here for compatability with noop.yaml
+    description: IP address on the control plane
+    default: ''
+    type: string
+  ControlPlaneNetwork: # Here for compatibility with ctlplane_vip.yaml
+    description: The name of the undercloud Neutron control plane
+    default: ctlplane
+    type: string
+  FixedIPs:
+    description: >
+        Control the IP allocation for the VIP port. E.g.
+        [{'ip_address':'1.2.3.4'}]
+    default: []
+    type: json
+  IPPool: # Here for compatibility with from_pool.yaml
+    default: {}
+    type: json
+  NodeIndex: # Here for compatibility with from_pool.yaml
+    default: 0
+    type: number
+
+resources:
+
+  ExternalPort:
+    type: OS::Neutron::Port
+    properties:
+      network: {get_param: ExternalNetName}
+      name: {get_param: PortName}
+      fixed_ips: {get_param: FixedIPs}
+      replacement_policy: AUTO
+
+outputs:
+  ip_address:
+    description: external network IP
+    value: {get_attr: [ExternalPort, fixed_ips, 0, ip_address]}
+  ip_address_uri:
+    description: external network IP with brackets suitable for a URL
+    value:
+          list_join:
+          - ''
+          - - '['
+            - {get_attr: [ExternalPort, fixed_ips, 0, ip_address]}
+            - ']'
+  ip_subnet:
+    # FIXME: this assumes a 2 digit subnet CIDR (need more heat functions?)
+    description: IP/Subnet CIDR for the external network IP
+    value:
+          list_join:
+            - ''
+            - - {get_attr: [ExternalPort, fixed_ips, 0, ip_address]}
+              - '/'
+              - {get_attr: [ExternalPort, subnets, 0, cidr, -2]}
+              - {get_attr: [ExternalPort, subnets, 0, cidr, -1]}
diff --git a/network/ports/from_service.yaml b/network/ports/from_service.yaml
index 6b669f41..359d77a7 100644
--- a/network/ports/from_service.yaml
+++ b/network/ports/from_service.yaml
@@ -32,3 +32,6 @@ outputs:
   ip_address:
     description: network IP
     value: {get_param: [ServiceVips, {get_param: ServiceName}]}
+  ip_address_uri:
+    description: network IP (for compatibility with IPv6)
+    value: {get_param: [ServiceVips, {get_param: ServiceName}]}
diff --git a/network/ports/internal_api.yaml b/network/ports/internal_api.yaml
index 4039f9d7..1d521a8d 100644
--- a/network/ports/internal_api.yaml
+++ b/network/ports/internal_api.yaml
@@ -43,6 +43,10 @@ outputs:
   ip_address:
     description: internal API network IP
     value: {get_attr: [InternalApiPort, fixed_ips, 0, ip_address]}
+  ip_address_uri:
+    description: |
+        internal API network IP (for compatibility with internal_api_v6.yaml)
+    value: {get_attr: [InternalApiPort, fixed_ips, 0, ip_address]}
   ip_subnet:
     description: IP/Subnet CIDR for the internal API network IP
     value:
diff --git a/network/ports/internal_api_from_pool.yaml b/network/ports/internal_api_from_pool.yaml
index 18ccd2b2..c7b04847 100644
--- a/network/ports/internal_api_from_pool.yaml
+++ b/network/ports/internal_api_from_pool.yaml
@@ -33,6 +33,9 @@ outputs:
   ip_address:
     description: internal API network IP
     value: {get_param: [IPPool, {get_param: InternalApiNetName}, {get_param: NodeIndex}]}
+  ip_address_uri:
+    description: internal API network IP (for compatibility with internal_api_v6.yaml)
+    value: {get_param: [IPPool, {get_param: InternalApiNetName}, {get_param: NodeIndex}]}
   ip_subnet:
     description: IP/Subnet CIDR for the internal API network IP
     value:
diff --git a/network/ports/internal_api_v6.yaml b/network/ports/internal_api_v6.yaml
new file mode 100644
index 00000000..279e6bd0
--- /dev/null
+++ b/network/ports/internal_api_v6.yaml
@@ -0,0 +1,63 @@
+heat_template_version: 2015-04-30
+
+description: >
+  Creates a port on the internal_api network.
+
+parameters:
+  InternalApiNetName:
+    description: Name of the internal API neutron network
+    default: internal_api
+    type: string
+  PortName:
+    description: Name of the port
+    default: ''
+    type: string
+  ControlPlaneIP: # Here for compatability with noop.yaml
+    description: IP address on the control plane
+    default: ''
+    type: string
+  FixedIPs:
+    description: >
+        Control the IP allocation for the VIP port. E.g.
+        [{'ip_address':'1.2.3.4'}]
+    default: []
+    type: json
+  IPPool: # Here for compatibility with from_pool.yaml
+    default: {}
+    type: json
+  NodeIndex: # Here for compatibility with from_pool.yaml
+    default: 0
+    type: number
+
+resources:
+
+  InternalApiPort:
+    type: OS::Neutron::Port
+    properties:
+      network: {get_param: InternalApiNetName}
+      name: {get_param: PortName}
+      fixed_ips: {get_param: FixedIPs}
+      replacement_policy: AUTO
+
+outputs:
+  ip_address:
+    description: internal API network IP
+    value: {get_attr: [InternalApiPort, fixed_ips, 0, ip_address]}
+  ip_address_uri:
+    description: internal api network IP with brackets suitable for a URL
+    value:
+          list_join:
+          - ''
+          - - '['
+            - {get_attr: [InternalApiPort, fixed_ips, 0, ip_address]}
+            - ']'
+  ip_subnet:
+    # FIXME: this assumes a 2 digit subnet CIDR (need more heat functions?)
+    description: IP/Subnet CIDR for the internal API network IP
+    value:
+          list_join:
+            - ''
+            - - {get_attr: [InternalApiPort, fixed_ips, 0, ip_address]}
+              - '/'
+              - {get_attr: [InternalApiPort, subnets, 0, cidr, -2]}
+              - {get_attr: [InternalApiPort, subnets, 0, cidr, -1]}
diff --git a/network/ports/management.yaml b/network/ports/management.yaml
index 8ad2eb47..967b66e1 100644
--- a/network/ports/management.yaml
+++ b/network/ports/management.yaml
@@ -36,6 +36,9 @@ outputs:
   ip_address:
     description: management network IP
     value: {get_attr: [ManagementPort, fixed_ips, 0, ip_address]}
+  ip_address_uri:
+    description: management network IP (for compatibility with management_v6.yaml)
+    value: {get_attr: [ManagementPort, fixed_ips, 0, ip_address]}
   ip_subnet:
     description: IP/Subnet CIDR for the management network IP
     value:
diff --git a/network/ports/management_from_pool.yaml b/network/ports/management_from_pool.yaml
index bbd62f5b..fc87e39a 100644
--- a/network/ports/management_from_pool.yaml
+++ b/network/ports/management_from_pool.yaml
@@ -33,6 +33,9 @@ outputs:
   ip_address:
     description: management network IP
     value: {get_param: [IPPool, {get_param: ManagementNetName}, {get_param: NodeIndex}]}
+  ip_address_uri:
+    description: management network IP (for compatibility with management_v6.yaml)
+    value: {get_param: [IPPool, {get_param: ManagementNetName}, {get_param: NodeIndex}]}
   ip_subnet:
     description: IP/Subnet CIDR for the management network IP
     value:
diff --git a/network/ports/management_v6.yaml b/network/ports/management_v6.yaml
new file mode 100644
index 00000000..a94ebc7b
--- /dev/null
+++ b/network/ports/management_v6.yaml
@@ -0,0 +1,54 @@
+heat_template_version: 2015-10-15
+
+description: >
+  Creates a port on the management network. The IP address will be chosen
+  automatically if FixedIPs is empty.
+
+parameters:
+  ManagementNetName:
+    description: Name of the management neutron network
+    default: management
+    type: string
+  PortName:
+    description: Name of the port
+    default: ''
+    type: string
+  ControlPlaneIP: # Here for compatibility with noop.yaml
+    description: IP address on the control plane
+    type: string
+  IPPool: # Here for compatibility with from_pool.yaml
+    default: {}
+    type: json
+  NodeIndex: # Here for compatibility with from_pool.yaml
+    default: 0
+    type: number
+
+resources:
+
+  ManagementPort:
+    type: OS::Neutron::Port
+    properties:
+      network: {get_param: ManagementNetName}
+      name: {get_param: PortName}
+      replacement_policy: AUTO
+
+outputs:
+  ip_address:
+    description: management network IP
+    value: {get_attr: [ManagementPort, fixed_ips, 0, ip_address]}
+  ip_address_uri:
+    description: management network IP with brackets suitable for a URL
+    value:
+          list_join:
+          - ''
+          - - '['
+            - {get_attr: [ManagementPort, fixed_ips, 0, ip_address]}
+            - ']'
+  ip_subnet:
+    description: IP/Subnet CIDR for the management network IP
+    value:
+          list_join:
+            - ''
+            - - {get_attr: [ManagementPort, fixed_ips, 0, ip_address]}
+              - '/'
+              - {str_split: ['/', {get_attr: [ManagementPort, subnets, 0, cidr]}, 1]}
diff --git a/network/ports/net_ip_map.yaml b/network/ports/net_ip_map.yaml
index c6386025..6bb4557b 100644
--- a/network/ports/net_ip_map.yaml
+++ b/network/ports/net_ip_map.yaml
@@ -7,21 +7,45 @@ parameters:
   ExternalIp:
     default: ''
     type: string
+  ExternalIpUri:
+    default: ''
+    type: string
+    description: IP address with brackets in case of IPv6
   InternalApiIp:
     default: ''
     type: string
+  InternalApiIpUri:
+    default: ''
+    type: string
+    description: IP address with brackets in case of IPv6
   StorageIp:
     default: ''
     type: string
+  StorageIpUri:
+    default: ''
+    type: string
+    description: IP address with brackets in case of IPv6
   StorageMgmtIp:
     default: ''
     type: string
+  StorageMgmtIpUri:
+    default: ''
+    type: string
+    description: IP address with brackets in case of IPv6
   TenantIp:
     default: ''
     type: string
+  TenantIpUri:
+    default: ''
+    type: string
+    description: IP address with brackets in case of IPv6
   ManagementIp:
     default: ''
     type: string
+  ManagementIpUri:
+    default: ''
+    type: string
+    description: IP address with brackets in case of IPv6
 
 outputs:
   net_ip_map:
@@ -36,3 +60,15 @@ outputs:
       storage_mgmt: {get_param: StorageMgmtIp}
       tenant: {get_param: TenantIp}
       management: {get_param: ManagementIp}
+  net_ip_uri_map:
+    description: >
+      A Hash containing a mapping of netowrk names to assigned IPs for a
+      specific machine with brackets around IPv6 addresses for use in URLs.
+    value:
+      ctlplane: {get_param: ControlPlaneIp}
+      external: {get_param: ExternalIpUri}
+      internal_api: {get_param: InternalApiIpUri}
+      storage: {get_param: StorageIpUri}
+      storage_mgmt: {get_param: StorageMgmtIpUri}
+      tenant: {get_param: TenantIpUri}
+      management: {get_param: ManagementIpUri}
diff --git a/network/ports/net_vip_map_external.yaml b/network/ports/net_vip_map_external.yaml
index 23e1f992..a40a0bfc 100644
--- a/network/ports/net_vip_map_external.yaml
+++ b/network/ports/net_vip_map_external.yaml
@@ -24,18 +24,33 @@ parameters:
   ExternalIp:
     default: ''
     type: string
+  ExternalIpUri:
+    default: ''
+    type: string
   InternalApiIp:
     default: ''
     type: string
+  InternalApiIpUri:
+    default: ''
+    type: string
   StorageIp:
     default: ''
     type: string
+  StorageIpUri:
+    default: ''
+    type: string
   StorageMgmtIp:
     default: ''
     type: string
+  StorageMgmtIpUri:
+    default: ''
+    type: string
   TenantIp:
     default: ''
     type: string
+  TenantIpUri:
+    default: ''
+    type: string
 
 outputs:
   net_ip_map:
@@ -48,3 +63,13 @@ outputs:
       internal_api: {get_param: InternalApiNetworkVip}
       storage: {get_param: StorageNetworkVip}
       storage_mgmt: {get_param: StorageMgmtNetworkVip}
+  net_ip_uri_map:
+    description: >
+      A Hash containing a mapping of netowrk names to assigned IPs for a
+      specific machine with brackets around IPv6 addresses for use in URLs.
+    value:
+      ctlplane: {get_param: ControlPlaneIP}
+      external: {get_param: ExternalNetworkVip}
+      internal_api: {get_param: InternalApiNetworkVip}
+      storage: {get_param: StorageNetworkVip}
+      storage_mgmt: {get_param: StorageMgmtNetworkVip}
diff --git a/network/ports/noop.yaml b/network/ports/noop.yaml
index ac946cd9..96c461e0 100644
--- a/network/ports/noop.yaml
+++ b/network/ports/noop.yaml
@@ -44,6 +44,9 @@ outputs:
   ip_address:
     description: pass thru network IP
     value: {get_param: ControlPlaneIP}
+  ip_address_uri:
+    description: pass thru network IP (for compatibility with vip_v6.yaml)
+    value: {get_param: ControlPlaneIP}
   ip_subnet:
     description: IP/Subnet CIDR for the pass thru network IP
     value:
diff --git a/network/ports/storage.yaml b/network/ports/storage.yaml
index 579554fb..1ed5cca1 100644
--- a/network/ports/storage.yaml
+++ b/network/ports/storage.yaml
@@ -43,6 +43,9 @@ outputs:
   ip_address:
     description: storage network IP
     value: {get_attr: [StoragePort, fixed_ips, 0, ip_address]}
+  ip_address_uri:
+    description: storage network IP (for compatibility with storage_v6.yaml)
+    value: {get_attr: [StoragePort, fixed_ips, 0, ip_address]}
   ip_subnet:
     description: IP/Subnet CIDR for the storage network IP
     value:
diff --git a/network/ports/storage_from_pool.yaml b/network/ports/storage_from_pool.yaml
index 13c16c15..dfc9e752 100644
--- a/network/ports/storage_from_pool.yaml
+++ b/network/ports/storage_from_pool.yaml
@@ -33,6 +33,9 @@ outputs:
   ip_address:
     description: storage network IP
     value: {get_param: [IPPool, {get_param: StorageNetName}, {get_param: NodeIndex}]}
+  ip_address_uri:
+    description: storage network IP (for compatibility with storage_v6.yaml)
+    value: {get_param: [IPPool, {get_param: StorageNetName}, {get_param: NodeIndex}]}
   ip_subnet:
     description: IP/Subnet CIDR for the storage network IP
     value:
diff --git a/network/ports/storage_mgmt.yaml b/network/ports/storage_mgmt.yaml
index f97e337b..548d226a 100644
--- a/network/ports/storage_mgmt.yaml
+++ b/network/ports/storage_mgmt.yaml
@@ -43,6 +43,10 @@ outputs:
   ip_address:
     description: storage_mgmt network IP
     value: {get_attr: [StorageMgmtPort, fixed_ips, 0, ip_address]}
+  ip_address_uri:
+    description: |
+        storage_mgmt network IP (for compatibility with storage_mgmt_v6.yaml)
+    value: {get_attr: [StorageMgmtPort, fixed_ips, 0, ip_address]}
   ip_subnet:
     description: IP/Subnet CIDR for the storage_mgmt network IP
     value:
diff --git a/network/ports/storage_mgmt_from_pool.yaml b/network/ports/storage_mgmt_from_pool.yaml
index 7c033ebd..9c757a6e 100644
--- a/network/ports/storage_mgmt_from_pool.yaml
+++ b/network/ports/storage_mgmt_from_pool.yaml
@@ -33,6 +33,9 @@ outputs:
   ip_address:
     description: storage MGMT network IP
     value: {get_param: [IPPool, {get_param: StorageMgmtNetName}, {get_param: NodeIndex}]}
+  ip_address_uri:
+    description: storage MGMT network IP (for compatibility with storage_mgmt_v6.yaml)
+    value: {get_param: [IPPool, {get_param: StorageMgmtNetName}, {get_param: NodeIndex}]}
   ip_subnet:
     description: IP/Subnet CIDR for the storage MGMT network IP
     value:
diff --git a/network/ports/storage_mgmt_v6.yaml b/network/ports/storage_mgmt_v6.yaml
new file mode 100644
index 00000000..61956be2
--- /dev/null
+++ b/network/ports/storage_mgmt_v6.yaml
@@ -0,0 +1,63 @@
+heat_template_version: 2015-04-30
+
+description: >
+  Creates a port on the storage_mgmt API network.
+
+parameters:
+  StorageMgmtNetName:
+    description: Name of the storage_mgmt API neutron network
+    default: storage_mgmt
+    type: string
+  PortName:
+    description: Name of the port
+    default: ''
+    type: string
+  ControlPlaneIP: # Here for compatability with noop.yaml
+    description: IP address on the control plane
+    default: ''
+    type: string
+  FixedIPs:
+    description: >
+        Control the IP allocation for the VIP port. E.g.
+        [{'ip_address':'1.2.3.4'}]
+    default: []
+    type: json
+  IPPool: # Here for compatibility with from_pool.yaml
+    default: {}
+    type: json
+  NodeIndex: # Here for compatibility with from_pool.yaml
+    default: 0
+    type: number
+
+resources:
+
+  StorageMgmtPort:
+    type: OS::Neutron::Port
+    properties:
+      network: {get_param: StorageMgmtNetName}
+      name: {get_param: PortName}
+      fixed_ips: {get_param: FixedIPs}
+      replacement_policy: AUTO
+
+outputs:
+  ip_address:
+    description: storage_mgmt network IP
+    value: {get_attr: [StorageMgmtPort, fixed_ips, 0, ip_address]}
+  ip_address_uri:
+    description: storage_mgmt network IP with brackets suitable for a URI
+    value:
+          list_join:
+          - ''
+          - - '['
+            - {get_attr: [StorageMgmtPort, fixed_ips, 0, ip_address]}
+            - ']'
+  ip_subnet:
+    # FIXME: this assumes a 2 digit subnet CIDR (need more heat functions?)
+    description: IP/Subnet CIDR for the storage_mgmt network IP
+    value:
+          list_join:
+            - ''
+            - - {get_attr: [StorageMgmtPort, fixed_ips, 0, ip_address]}
+              - '/'
+              - {get_attr: [StorageMgmtPort, subnets, 0, cidr, -2]}
+              - {get_attr: [StorageMgmtPort, subnets, 0, cidr, -1]}
diff --git a/network/ports/storage_v6.yaml b/network/ports/storage_v6.yaml
new file mode 100644
index 00000000..13b62276
--- /dev/null
+++ b/network/ports/storage_v6.yaml
@@ -0,0 +1,63 @@
+heat_template_version: 2015-04-30
+
+description: >
+  Creates a port on the storage network.
+
+parameters:
+  StorageNetName:
+    description: Name of the storage neutron network
+    default: storage
+    type: string
+  PortName:
+    description: Name of the port
+    default: ''
+    type: string
+  ControlPlaneIP: # Here for compatability with noop.yaml
+    description: IP address on the control plane
+    default: ''
+    type: string
+  FixedIPs:
+    description: >
+        Control the IP allocation for the VIP port. E.g.
+        [{'ip_address':'1.2.3.4'}]
+    default: []
+    type: json
+  IPPool: # Here for compatibility with from_pool.yaml
+    default: {}
+    type: json
+  NodeIndex: # Here for compatibility with from_pool.yaml
+    default: 0
+    type: number
+
+resources:
+
+  StoragePort:
+    type: OS::Neutron::Port
+    properties:
+      network: {get_param: StorageNetName}
+      name: {get_param: PortName}
+      fixed_ips: {get_param: FixedIPs}
+      replacement_policy: AUTO
+
+outputs:
+  ip_address:
+    description: storage network IP
+    value: {get_attr: [StoragePort, fixed_ips, 0, ip_address]}
+  ip_address_uri:
+    description: storage network IP with brackets suitable for a URL
+    value:
+          list_join:
+          - ''
+          - - '['
+            - {get_attr: [StoragePort, fixed_ips, 0, ip_address]}
+            - ']'
+  ip_subnet:
+    # FIXME: this assumes a 2 digit subnet CIDR (need more heat functions?)
+    description: IP/Subnet CIDR for the storage network IP
+    value:
+          list_join:
+            - ''
+            - - {get_attr: [StoragePort, fixed_ips, 0, ip_address]}
+              - '/'
+              - {get_attr: [StoragePort, subnets, 0, cidr, -2]}
+              - {get_attr: [StoragePort, subnets, 0, cidr, -1]}
diff --git a/network/ports/tenant.yaml b/network/ports/tenant.yaml
index cc0771ea..d8f78c49 100644
--- a/network/ports/tenant.yaml
+++ b/network/ports/tenant.yaml
@@ -43,6 +43,9 @@ outputs:
   ip_address:
     description: tenant network IP
     value: {get_attr: [TenantPort, fixed_ips, 0, ip_address]}
+  ip_address_uri:
+    description: tenant network IP (for compatibility with tenant_v6.yaml)
+    value: {get_attr: [TenantPort, fixed_ips, 0, ip_address]}
   ip_subnet:
     description: IP/Subnet CIDR for the tenant network IP
     value:
diff --git a/network/ports/tenant_from_pool.yaml b/network/ports/tenant_from_pool.yaml
index 17e4ac8a..d5f3156e 100644
--- a/network/ports/tenant_from_pool.yaml
+++ b/network/ports/tenant_from_pool.yaml
@@ -33,6 +33,9 @@ outputs:
   ip_address:
     description: tenant network IP
     value: {get_param: [IPPool, {get_param: TenantNetName}, {get_param: NodeIndex}]}
+  ip_address_uri:
+    description: tenant network IP (for compatibility with tenant_v6.yaml)
+    value: {get_param: [IPPool, {get_param: TenantNetName}, {get_param: NodeIndex}]}
   ip_subnet:
     description: IP/Subnet CIDR for the tenant network IP
     value:
diff --git a/network/ports/tenant_v6.yaml b/network/ports/tenant_v6.yaml
new file mode 100644
index 00000000..6ca37549
--- /dev/null
+++ b/network/ports/tenant_v6.yaml
@@ -0,0 +1,63 @@
+heat_template_version: 2015-04-30
+
+description: >
+  Creates a port on the tenant network.
+
+parameters:
+  TenantNetName:
+    description: Name of the tenant neutron network
+    default: tenant
+    type: string
+  PortName:
+    description: Name of the port
+    default: ''
+    type: string
+  ControlPlaneIP: # Here for compatability with noop.yaml
+    description: IP address on the control plane
+    default: ''
+    type: string
+  FixedIPs:
+    description: >
+        Control the IP allocation for the VIP port. E.g.
+        [{'ip_address':'1.2.3.4'}]
+    default: []
+    type: json
+  IPPool: # Here for compatibility with from_pool.yaml
+    default: {}
+    type: json
+  NodeIndex: # Here for compatibility with from_pool.yaml
+    default: 0
+    type: number
+
+resources:
+
+  TenantPort:
+    type: OS::Neutron::Port
+    properties:
+      network: {get_param: TenantNetName}
+      name: {get_param: PortName}
+      fixed_ips: {get_param: FixedIPs}
+      replacement_policy: AUTO
+
+outputs:
+  ip_address:
+    description: tenant network IP
+    value: {get_attr: [TenantPort, fixed_ips, 0, ip_address]}
+  ip_address_uri:
+    description: tenant network IP with brackets suitable for a URL
+    value:
+          list_join:
+          - ''
+          - - '['
+            - {get_attr: [TenantPort, fixed_ips, 0, ip_address]}
+            - ']'
+  ip_subnet:
+    # FIXME: this assumes a 2 digit subnet CIDR (need more heat functions?)
+    description: IP/Subnet CIDR for the tenant network IP
+    value:
+          list_join:
+            - ''
+            - - {get_attr: [TenantPort, fixed_ips, 0, ip_address]}
+              - '/'
+              - {get_attr: [TenantPort, subnets, 0, cidr, -2]}
+              - {get_attr: [TenantPort, subnets, 0, cidr, -1]}
diff --git a/network/ports/vip.yaml b/network/ports/vip.yaml
index fb251994..38322907 100644
--- a/network/ports/vip.yaml
+++ b/network/ports/vip.yaml
@@ -45,6 +45,9 @@ outputs:
   ip_address:
     description: Virtual IP network IP
     value: {get_attr: [VipPort, fixed_ips, 0, ip_address]}
+  ip_address_uri:
+    description: Virtual IP network IP (for compatibility with vip.yaml)
+    value: {get_attr: [VipPort, fixed_ips, 0, ip_address]}
   ip_subnet:
     description: IP/Subnet CIDR for the network associated with this IP
     value:
diff --git a/network/ports/vip_v6.yaml b/network/ports/vip_v6.yaml
new file mode 100644
index 00000000..de927094
--- /dev/null
+++ b/network/ports/vip_v6.yaml
@@ -0,0 +1,65 @@
+heat_template_version: 2015-04-30
+
+description: >
+  Creates a port for a VIP on the isolated network NetworkName.
+  The IP address will be chosen automatically if FixedIPs is empty.
+
+parameters:
+  ServiceName: # Here for compatibility with from_service.yaml
+    description: Name of the service to lookup
+    default: ''
+    type: string
+  NetworkName:
+    description: Name of the network where the VIP will be created
+    default: internal_api
+    type: string
+  PortName:
+    description: Name of the port
+    default: ''
+    type: string
+  ControlPlaneIP: # Here for compatability with noop.yaml
+    description: IP address on the control plane
+    default: ''
+    type: string
+  ControlPlaneNetwork:
+    description: The name of the undercloud Neutron control plane
+    default: ctlplane
+    type: string
+  FixedIPs:
+    description: >
+        Control the IP allocation for the VIP port. E.g.
+        [{'ip_address':'1.2.3.4'}]
+    default: []
+    type: json
+
+resources:
+  VipPort:
+    type: OS::Neutron::Port
+    properties:
+      network: {get_param: NetworkName}
+      name: {get_param: PortName}
+      fixed_ips: {get_param: FixedIPs}
+      replacement_policy: AUTO
+
+outputs:
+  ip_address:
+    description: Virtual IP network IP
+    value: {get_attr: [VipPort, fixed_ips, 0, ip_address]}
+  ip_address_uri:
+    description: Virtual IP with brackets suitable for a URL
+    value:
+          list_join:
+          - ''
+          - - '['
+            - {get_attr: [VipPort, fixed_ips, 0, ip_address]}
+            - ']'
+  ip_subnet:
+    # FIXME: this assumes a 2 digit subnet CIDR (need more heat functions?)
+    description: IP/Subnet CIDR for the network associated with this IP
+    value:
+          list_join:
+            - ''
+            - - {get_attr: [VipPort, fixed_ips, 0, ip_address]}
+              - '/'
+              - {get_attr: [VipPort, subnets, 0, cidr, -2]}
+              - {get_attr: [VipPort, subnets, 0, cidr, -1]}