Merge "Support network isolation without external nets"

4 files changed, 237 insertions, 0 deletions

diff --git a/network/config/bond-with-vlans/README.md b/network/config/bond-with-vlans/README.md
index 1679df3c..98879b4f 100644
--- a/network/config/bond-with-vlans/README.md
+++ b/network/config/bond-with-vlans/README.md
@@ -1,6 +1,12 @@
 This directory contains Heat templates to help configure
 Vlans on a bonded pair of NICs for each Overcloud role.
 
+There are two versions of the controller role template, one with
+an external network interface, and another without. If the
+external network interface is not configured the ctlplane address
+ranges will be used for external (public) network traffic.
+
+
 Configuration
 -------------
 
@@ -13,3 +19,9 @@ something like this:
     OS::TripleO::Controller::Net::SoftwareConfig: network/config/bond-with-vlans/controller.yaml
     OS::TripleO::ObjectStorage::Net::SoftwareConfig: network/config/bond-with-vlans/swift-storage.yaml
     OS::TripleO::CephStorage::Net::SoftwareConfig: network/config/bond-with-vlans/ceph-storage.yaml
+
+Configuration with no External Network
+--------------------------------------
+Same as above except set the following value for the controller role:
+
+    OS::TripleO::Controller::Net::SoftwareConfig: network/config/bond-with-vlans/controller-no-external.yaml
diff --git a/network/config/bond-with-vlans/controller-no-external.yaml b/network/config/bond-with-vlans/controller-no-external.yaml
new file mode 100644
index 00000000..22579e8f
--- /dev/null
+++ b/network/config/bond-with-vlans/controller-no-external.yaml
@@ -0,0 +1,114 @@
+heat_template_version: 2015-04-30
+
+description: >
+  Software Config to drive os-net-config with 2 bonded nics on a bridge
+  with VLANs attached for the controller role.
+
+parameters:
+  ExternalIpSubnet:
+    default: ''
+    description: IP address/subnet on the external network
+    type: string
+  InternalApiIpSubnet:
+    default: ''
+    description: IP address/subnet on the internal API network
+    type: string
+  StorageIpSubnet:
+    default: ''
+    description: IP address/subnet on the storage network
+    type: string
+  StorageMgmtIpSubnet:
+    default: ''
+    description: IP address/subnet on the storage mgmt network
+    type: string
+  TenantIpSubnet:
+    default: ''
+    description: IP address/subnet on the tenant network
+    type: string
+  BondInterfaceOvsOptions:
+    default: ''
+    description: The ovs_options string for the bond interface. Set things like
+                 lacp=active and/or bond_mode=balance-slb using this option.
+    type: string
+  ExternalNetworkVlanID:
+    default: 10
+    description: Vlan ID for the external network traffic.
+    type: number
+  InternalApiNetworkVlanID:
+    default: 20
+    description: Vlan ID for the internal_api network traffic.
+    type: number
+  StorageNetworkVlanID:
+    default: 30
+    description: Vlan ID for the storage network traffic.
+    type: number
+  StorageMgmtNetworkVlanID:
+    default: 40
+    description: Vlan ID for the storage mgmt network traffic.
+    type: number
+  TenantNetworkVlanID:
+    default: 50
+    description: Vlan ID for the tenant network traffic.
+    type: number
+  ExternalInterfaceDefaultRoute:
+    default: '10.0.0.1'
+    description: default route for the external network
+    type: string
+
+resources:
+  OsNetConfigImpl:
+    type: OS::Heat::StructuredConfig
+    properties:
+      group: os-apply-config
+      config:
+        os_net_config:
+          network_config:
+            -
+              type: ovs_bridge
+              name: {get_input: bridge_name}
+              members:
+                -
+                  type: ovs_bond
+                  name: bond1
+                  ovs_options: {get_param: BondInterfaceOvsOptions}
+                  members:
+                    -
+                      type: interface
+                      name: nic2
+                      primary: true
+                    -
+                      type: interface
+                      name: nic3
+                -
+                  type: vlan
+                  device: bond1
+                  vlan_id: {get_param: InternalApiNetworkVlanID}
+                  addresses:
+                  -
+                    ip_netmask: {get_param: InternalApiIpSubnet}
+                -
+                  type: vlan
+                  device: bond1
+                  vlan_id: {get_param: StorageNetworkVlanID}
+                  addresses:
+                  -
+                    ip_netmask: {get_param: StorageIpSubnet}
+                -
+                  type: vlan
+                  device: bond1
+                  vlan_id: {get_param: StorageMgmtNetworkVlanID}
+                  addresses:
+                  -
+                    ip_netmask: {get_param: StorageMgmtIpSubnet}
+                -
+                  type: vlan
+                  device: bond1
+                  vlan_id: {get_param: TenantNetworkVlanID}
+                  addresses:
+                  -
+                    ip_netmask: {get_param: TenantIpSubnet}
+
+outputs:
+  OS::stack_id:
+    description: The OsNetConfigImpl resource.
+    value: {get_resource: OsNetConfigImpl}
diff --git a/network/config/single-nic-vlans/README.md b/network/config/single-nic-vlans/README.md
index e3e16574..6f128650 100644
--- a/network/config/single-nic-vlans/README.md
+++ b/network/config/single-nic-vlans/README.md
@@ -1,6 +1,11 @@
 This directory contains Heat templates to help configure
 Vlans on a single NICs for each Overcloud role.
 
+There are two versions of the controller role template, one with
+an external network interface, and another without. If the
+external network interface is not configured the ctlplane address
+ranges will be used for external (public) network traffic.
+
 Configuration
 -------------
 
@@ -17,3 +22,10 @@ something like this:
 Or use this Heat environment file:
 
   environments/net-single-nic-with-vlans.yaml
+
+
+Configuration with no External Network
+--------------------------------------
+Same as above except set the following value for the controller role:
+
+    OS::TripleO::Controller::Net::SoftwareConfig: network/config/single-nic-vlans/controller-no-external.yaml
diff --git a/network/config/single-nic-vlans/controller-no-external.yaml b/network/config/single-nic-vlans/controller-no-external.yaml
new file mode 100644
index 00000000..faf9e9c2
--- /dev/null
+++ b/network/config/single-nic-vlans/controller-no-external.yaml
@@ -0,0 +1,99 @@
+heat_template_version: 2015-04-30
+
+description: >
+  Software Config to drive os-net-config to configure VLANs for the
+  controller role. No external IP is configured.
+
+parameters:
+  ExternalIpSubnet:
+    default: ''
+    description: IP address/subnet on the external network
+    type: string
+  InternalApiIpSubnet:
+    default: ''
+    description: IP address/subnet on the internal API network
+    type: string
+  StorageIpSubnet:
+    default: ''
+    description: IP address/subnet on the storage network
+    type: string
+  StorageMgmtIpSubnet:
+    default: ''
+    description: IP address/subnet on the storage mgmt network
+    type: string
+  TenantIpSubnet:
+    default: ''
+    description: IP address/subnet on the tenant network
+    type: string
+  ExternalNetworkVlanID:
+    default: 10
+    description: Vlan ID for the external network traffic.
+    type: number
+  InternalApiNetworkVlanID:
+    default: 20
+    description: Vlan ID for the internal_api network traffic.
+    type: number
+  StorageNetworkVlanID:
+    default: 30
+    description: Vlan ID for the storage network traffic.
+    type: number
+  StorageMgmtNetworkVlanID:
+    default: 40
+    description: Vlan ID for the storage mgmt network traffic.
+    type: number
+  TenantNetworkVlanID:
+    default: 50
+    description: Vlan ID for the tenant network traffic.
+    type: number
+  ExternalInterfaceDefaultRoute:
+    default: '10.0.0.1'
+    description: default route for the external network
+    type: string
+
+resources:
+  OsNetConfigImpl:
+    type: OS::Heat::StructuredConfig
+    properties:
+      group: os-apply-config
+      config:
+        os_net_config:
+          network_config:
+            -
+              type: ovs_bridge
+              name: {get_input: bridge_name}
+              use_dhcp: true
+              members:
+                -
+                  type: interface
+                  name: nic1
+                  # force the MAC address of the bridge to this interface
+                  primary: true
+                -
+                  type: vlan
+                  vlan_id: {get_param: InternalApiNetworkVlanID}
+                  addresses:
+                  -
+                    ip_netmask: {get_param: InternalApiIpSubnet}
+                -
+                  type: vlan
+                  vlan_id: {get_param: StorageNetworkVlanID}
+                  addresses:
+                  -
+                    ip_netmask: {get_param: StorageIpSubnet}
+                -
+                  type: vlan
+                  vlan_id: {get_param: StorageMgmtNetworkVlanID}
+                  addresses:
+                  -
+                    ip_netmask: {get_param: StorageMgmtIpSubnet}
+                -
+                  type: vlan
+                  vlan_id: {get_param: TenantNetworkVlanID}
+                  addresses:
+                  -
+                    ip_netmask: {get_param: TenantIpSubnet}
+
+outputs:
+  OS::stack_id:
+    description: The OsNetConfigImpl resource.
+    value: {get_resource: OsNetConfigImpl}