summaryrefslogtreecommitdiffstats
path: root/spec
AgeCommit message (Collapse)AuthorFilesLines
2017-01-25Merge "Make sure we bind the rabbit inter-cluster to a specific interface"Jenkins1-0/+11
2017-01-23Merge "Add Ceph RBD mirror Pacemaker profile"Jenkins1-0/+64
2017-01-20Merge "cinder: move glance params into common"Jenkins2-4/+6
2017-01-20Make sure we bind the rabbit inter-cluster to a specific interfaceMichele Baldessari1-0/+11
Currently the inter-cluster communication port listens to all ip addresses: tcp 0 0 0.0.0.0:25672 0.0.0.0:* LISTEN 25631/beam.smp In order to limit it to listen only to the network assigned to rabbitmq we need to add the following: {kernel, [ ... {inet_dist_use_interface, {172,17,0,16}}, ... ]} In order to do the conversion from an ip address to the Erlang representation we add a function that takes a string and returns a converted output. The (~400 randomly generated) IPv6/4 addresses at [1] have been parsed both via erl's built-in inet:parse_address() function and our ruby implementation. All converted ip addresses resulted in the same output [2], [3]. The only difference is that Erlang's parse_address() considers network ip addresses (e.g. 10.0.0.0) invalid whereas the ruby function does not. This should not be a problem as the use case here is to bind a service to a specific ip address on an interface and if anything we likely prefer the less strict behaviour, given that at least in theory it is perfectly valid for an interface to have a network address assigned to it. [1] http://acksyn.org/files/tripleo/ip-addresses.txt [2] http://acksyn.org/files/tripleo/ip-addresses-ruby.txt [3] http://acksyn.org/files/tripleo/ip-addresses-erl.txt Change-Id: I211c75b9bab25c545bcc7f90f34edebc92bba788 Partial-Bug: #1645898
2017-01-19cinder: move glance params into commonEmilien Macchi2-4/+6
glance params are also used by cinder-volume. This patch aims to use cinder::glance in common roles for cinder, so we can split cinder api and cinder volume. Depends-On: Id81c029318016068481dd614ed62cc4bfaf0f3e8 Change-Id: I9703efb38c2a3166c7f21c5c1b942f33abb9e76c
2017-01-19Add base profile for Octavia servicesbeagles2-0/+254
Adds initial base profile and profile for API service. Partially-implements: blueprint octavia-service-integration Change-Id: I77783029797be4fb488c6e743c51d228eba9c474
2017-01-18Merge "Remove legacy flag and use composable interface"Jenkins1-14/+2
2017-01-18Add Ceph RBD mirror Pacemaker profileGiulio Fidente1-0/+64
This change adds a profile for the Ceph RBD mirror service, which should be managed by Pacemaker to make sure there is always a single instance running. Change-Id: Ic63dc5cffece38942d305f538f71dd58a5d50789 Partial-Bug: #1652177
2017-01-18Remove legacy flag and use composable interfacePradeep Kilambi1-14/+2
We dont need this flag anymore as we will disable api using composable interface instead. See I67900f7e6816212831aea8ed18f323652857fbd3 Closes-bug: #1656364 Change-Id: Ib6aea02bde6ad7e5223336579f0a99d6cd3ee98f
2017-01-17Merge "Call VF configuration from udev rules"Jenkins1-1/+10
2017-01-14nova: disable ::nova::db::sync_cell_v2Emilien Macchi1-3/+5
This feature is broken for us now and there is work in progress in Nova to improve nova cell deployment. Until it's fixed upstream, we need to disable cells deployment for now, so we can promote our CI. Change-Id: I379ba9e94a92ed225a03a67fc975b542447a9c8b Related-Bug: #1649341
2017-01-10Merge "Rspec tests for nova profiles"Jenkins11-0/+800
2017-01-09Rspec tests for nova profilesAlex Schultz11-0/+800
This change fixes the hiera calls in the base nova profile to use the parameter rather than continue to call hiera. Additionally this change includes basic test coverage for the various nova profiles. Change-Id: If393606eeb3c39ed3a2655bd89c5c276a9cf106e
2017-01-09Add support for not using admin_token in Ceph/RGWKeith Schincke2-0/+18
This patch add the option for using Keyston V3 authention with the Ceph/RGW service instead of using the admin_token Change-Id: I42861afcac221478dcb68be13b6dbc2533a7f158
2017-01-05firewall: add IPv6 supportEmilien Macchi1-13/+57
This patch adds support for ip6tables rules in TripleO, in a intuitive and flexible fashion. 1) Default firewal rules 'source' parameter to undef. It was 0.0.0.0/0 before but now undef, so we don't need complex logic to support ipv6 rules. undef will create empty source, which is the same as 0.0.0.0/0 or ::/0. 2) Automatically convert icmp rules to ipv6-icmp for ipv6 rules. 3) Automatically create IPv6 rules like it's for IPv4. 4) Only create rules that can be created, depending on source/destination ip version. This patch should be backward compatible and adds a layer of security for IPv6 deployments. If previous deployments were manually creating Ipv6 rules, it's possible that this patch will override them. Our framework is able to configure any rule, so it shouldn't be a problem for upgrades. Co-Authored-By: Ben Nemec <bnemec@redhat.com> Closes-Bug: #1654050 Change-Id: I98a00a9ae265d3e5854632e749cc8c3a1647298c
2017-01-04Adds a profile for the Ceph MDS serviceGiulio Fidente1-0/+59
This change adds a profile to deploy the Ceph MDS service and some basic unit tests for it. Depends-On: I558b43deaa9b243c54f3d7ae945f11dd4925eb5d Change-Id: Iaecc3ff7acb851776c5057c42a5a513a70425d2c Partial-Bug: #1644784
2017-01-04Merge "Adds ability to populate SSH Banner text"Jenkins1-0/+30
2016-12-22[CVE-2016-9599] Enforce Firewall TCP / UDP rules managementEmilien Macchi1-2/+15
This closes CVE-2016-9599. 1) Sanitize dynamic HAproxy endpoints firewall rules Build the hash of firewall rules only when a port is specified. The HAproxy endpoints are using TCP protocol, which means we have to specify a port to the IPtables rules. Some services don't have public network exposure (e.g. Glance Registry), which means they don't need haproxy_ssl rule. The code prepare the hash depending on the service_port and public_ssl_port parameters and create the actual firewall rules only if one of those or both parameters are specified. It will prevent new services without public exposure to open all traffic because no port is specified. 2) Secure Firewall rules creations The code won't allow to create TCP / UDP IPtables rules in INPUT or OUTPUT chains without port or sport or dport, because doing it would allow an IPtables rule opening all traffic for TCP or UDP. If we try to do that, Puppet catalog will fail with an error explaining why. Example of use-cases: - creating VRRP rules wouldn't require port parameters. - creating TCP or UDP rules would require port parameters. 3) Allow to open all traffic for TCO / UDP (when desired) Some use-cases require to open all traffic for all ports on TCP / UDP. It will be possible if the user gives port = 'all' when creating the firewall rule. Backward compatibility: - if our users created custom TCP / UDP firewall rules without port parameters, it won't work anymore, for security purpose. - if you users want to open TCP / UDP for all ports, they need to pass port = 'all' and the rule will be created, though a warning will be displayed because this is insecure. - if our users created custom VRRP rules without port parameters, it will still work correctly and rules will be created. - TCP / UDP rules in FORWARD chain without port are still accepted. Change-Id: I19396c8ab06b91fee3253cdfcb834482f4040a59 Closes-Bug: #1651831
2016-12-21Adds ability to populate SSH Banner textLuke Hinds1-0/+30
A puppet manifest to allow the toggle of 'Banner' in sshd_config and enable population of an SSH login banner needed for security compliance such as DISA STIG If `Bannertext` is set as a parameter, the `Banner` key within sshd_config is toggled to `/etc/issue` and the content is copied into the `/etc/issue` file Change-Id: Ie9f8afdfa9930428f06c9669fedb460dc1064d5e Closes-Bug: #1640306
2016-12-19Merge "Disable legacy ceilometer api by default"Jenkins1-2/+14
2016-12-17Merge "Add tripleo::ui rspec tests"Jenkins1-0/+99
2016-12-09Disable legacy ceilometer api by defaultPradeep Kilambi1-2/+14
Ceilometer api is deprectaed in Ocata. Lets disable by default. This can still be enabled by setting enable_legacy_ceilometer_api param. Change-Id: Iffb8c2cfed53d8b29e777c35cee44921194239e9
2016-12-09Merge "Add cinder profile spec tests"Jenkins21-0/+1107
2016-12-09Merge "Delete MidoNet deprecated classes and their tests"Jenkins3-216/+0
2016-12-07Delete MidoNet deprecated classes and their testsAlejandro Andreu3-216/+0
MidoNet no longer uses the API component. It has been renamed/refactored to "cluster" as it can be seen on the docs at https://blog.midonet.org/introducing-midonet-cluster-services/ Also there is no need to have a Cassandra and Zookeeper dedicated classes, as we leverage this through the use of the midonet_openstack puppet module. Change-Id: I2f17aeeac2d1b121be0d445ff555320d5af5d270 Partial-Bug: #1647302
2016-12-06Add tripleo::ui rspec testsAlex Schultz1-0/+99
Change-Id: I2eb5b84dbeedde58153bceb707fd15cce8f03d5e
2016-12-05Add cinder profile spec testsAlex Schultz21-0/+1107
This change adds rspec testing for the cinder profiles with in puppet-tripleo. Additionally while testing, it was found that the backends may incorrectly have an extra , included in the settings for cinder volume when running puppet 3. This change includes a fix the cinder volume backends to make sure we are not improperly configuring it with a trailing comma. Change-Id: Ibdfee330413b6f9aecdf42a5508c21126fc05973
2016-11-28Use FQDNs for the services' RabbitMQ configurationJuan Antonio Osorio Robles9-10/+10
This replaces the services' IP-based RabbitMQ configuration and uses FQDNs instead. Change-Id: I2be81aecacf50839a029533247981f5edf59cb7f
2016-11-25Merge "Do not configure state matching when using GRE"Jenkins1-1/+3
2016-11-24Do not configure state matching when using GREBrent Eagles1-1/+3
The firewall rule quite reasonably sets up a default state matching rule but this is invalid for GRE. This patch conditionally adds the state matching if the protocol is not GRE. Closes-Bug: #1644360 Change-Id: Ie4ca41d0f36e79ba6822c358e21b827105736dd7
2016-11-17Remove Combination alarms supportPradeep Kilambi1-16/+0
combination alarms are completely removed in Ocata. Remove this from tripleo. Change-Id: Icdf81d2f489db33533a1a0979cba3b5a652535d5
2016-11-11Normalize civetweb binding address if IPv6Giulio Fidente1-4/+12
The civetweb binding format is IP:PORT; this change ensures the IP is enclosed in brackets if IPv6. To do so we add the bind_ip and bind_port parameters to the rgw service class. Change-Id: Ib84fa3479c2598bff7e89ad60a1c7d5f2c22c18c Co-Authored-By: Lukas Bezdicka <social@v3.sk> Related-Bug: #1636515
2016-11-11Call VF configuration from udev rulesBrent Eagles1-1/+10
When a physical function that was allocated to a guest is released back the system, it is not automatically brought "up" and the VF configuration is not restored. This patch creates a file containing some udev rules to force the VF configuration. Note: we may find that the ifup-local script is no longer required but this will require further testing. Change-Id: Ie6e78730aa0a748b3b5100ab7c7bc007d8ab176d Partial-Bug: #1639901
2016-11-01Merge "Add barbican profile rspec testing"Jenkins3-0/+166
2016-10-19Add barbican profile rspec testingAlex Schultz3-0/+166
This change adds rspec tests for the barbican profiles to ensure they function as expected. Change-Id: I73f5405ade2cc73024efbeb2cfbfc831a2120f51
2016-10-17Add port to rabbitmq node ip listBrent Eagles2-3/+3
We use the rabbit_hosts configuration for most of our services but we haven't been adding the configured port. This patch appends the IP port used provided to the service's heat template to the IPs in the list. Note: while we could use the value set for the rabbitmq server in rabbitmq::port, it doesn't allow for dealing with SSL. This also is also backwards compatible with the RabbitClientPort parameters used in the heat templates. Change-Id: I0000f039144a6b0e98c0a148dc69324f60db3d8b Closes-Bug: #1633580
2016-10-14packages: run upgrade at 'setup' stageEmilien Macchi1-3/+2
Instead of using an operator to make sure we upgrade package before any service, which causes dependency cycles with iptables puppet module, let's do another approach where we upgrade rpms in the 'setup' stage, which is a stage that runs before configure and running services. In that way, we'll remove dependency cycles and make sure packages are upgrades before configure and running TripleO services. Change-Id: I1be83f88be1959885c980ab4f428477d412751f7
2016-10-07Only run ceilometer::db::sync on bootstrap nodeAlex Schultz1-2/+7
The ceilometer::db::sync is included by default in ceilometer::db but we only want it to run on the bootstrap node. This change passes the sync_db parameter to ceilometer::db to manage the db sync process rather than trying to manage the inclusion of ceilometer::db::sync within the profile class. Change-Id: Ib56db1a90dd6fbfe7582fc57b7728df81942cce2 Closes-Bug: #1629373
2016-10-05Add ceph profile rspec testingAlex Schultz6-0/+403
This change adds rspec testing for the ceph profiles in puppet-tripleo. Change-Id: I08954e011848d6b747735f11b3cbff5707460c26
2016-09-30Add ceilometer profile rspec testingAlex Schultz5-0/+309
This change adds rspec testing for the ceilometer profiles. While writing these tests, the tripleo::profile::base::ceilometer::collector class needed to have the hiera lookups moved to class parameters to allow for testing the possible options around the database backend. These tests add coverage for ipv4 and ipv6 configurations for the collector profile as well as excluding mongodb on the backend. Change-Id: I1abae040104e8492a9fe266de74080e1e7701731
2016-09-30Add aodh profile rspec testingAlex Schultz8-1/+349
This change adds rspec testing for the aodh profile and serves as an example as to how to add in spec testing using hieradata to provide some required parameters. This testing adds improved coverage for expectations around computed configuration items as well as for conditions around the steps within the tripleo deployment Change-Id: Ic763a544289a222fea97020a98821c1e375651a3
2016-09-23Merge "Switch puppet-tripleo to use puppet-openstack_spec_helper"Jenkins1-0/+5
2016-09-23Merge "Add in rspec-puppet-facts support"Jenkins10-181/+132
2016-09-22Switch puppet-tripleo to use puppet-openstack_spec_helperEmilien Macchi1-0/+5
Align puppet-tripleo with other Puppet OpenStack modules to use puppet-openstack_spec_helper. Here are the benefits: - Allow to use Depends-On between Puppet OpenStack modules and puppet-tripleo, and unit tests will work correctly with dependencies. - Use the Puppet OpenStack gemspec file that handle gems dependencies to test the module. - Allow to re-use ruby helper that Puppet OpenStack modules have in unit tests, to avoid duplicated code. - Don't manage .fixtures.yml file, it will be generated by Puppet OpenStack tooling. TripleO dependencies will live in Puppetfile_extras. Change-Id: Ic66e9f872c57545327a9fb4b8ae86fbf0abbd8be
2016-09-21Add in rspec-puppet-facts supportAlex Schultz10-181/+132
This change pulls in rspec-puppet-facts to provide the basic default facts for puppet-tripleo rspec tests. rspec-puppet-facts provides an easy to use interface to allow for the same set of tests to be executed with multiple sets of operating system facts. In most cases this includes defaults for Debian/RedHat based systems. In puppet-tripleo's case this is just RHEL/CentOS. We are removing the Fedora listing from the metadata.json as we only support RHEL and CentOS for tripleo. This change also updates the existing rspec tests to leverage rspec-puppet-facts to be more consistent with how facts are defined. Change-Id: I0ddc71799d74ee95b9828aea6a8dcb4abb4e4e62
2016-09-21Add FQDN testcase in swift proxy profile rspec testsEmilien Macchi1-0/+15
Add more coverage in our unit testing for FQDNs. Change-Id: I74859cdecc0d81138b2fe986883c4f7c49b8cab3
2016-09-20swift: normalize memcache servers IP addressesEmilien Macchi1-0/+89
In the case of memcache servers are IPv6, make sure brackets set in the way we construct the list of memcache server + memcache port parameter. Also add unit-tests to test that the output is what we want in the configuration. Depends-On: I8d361ce9cfcfe6a3f8592b2b7991971a3c748c75 Closes-Bug: 1625335 Change-Id: I9fb8168d8fb56c9d8465d58a45fd8c6edfee6fdd
2016-08-29Configure the numvfs for SRIOV interfaceskarthik s4-0/+166
This patch shall create VFs via the PCI SYS interface. Default value : $::os_service_default Sample Format : ['eth0:4','eth2:128'] For values as in sample format, the sriov_numvfs config files for eth0 and eth2 will have the values 4 and 128 respectively The SR-IOV numvfs configuration shall be persisted in /sbin/ifup-local so that, during the bootup of the compute nodes, the numvfs configuration will be restored. Change-Id: I7450b904475bdf46498d9af633416b3eba12f761 Implements: blueprint tripleo-sriov Signed-off-by: karthik s <ksundara@redhat.com>
2016-07-25Unit tests for HAproxy dual stackEmilien Macchi1-0/+72
Change-Id: I6a959609523bd7fa681cd86522a56fff7c92352b
2016-05-25Add lookup_hiera_hash functionGiulio Fidente4-0/+31
The lookup_hiera_hash function is meant to lookup for the value of a given key from a given Hiera hash. In the manifests this is possible by saving the value of the hash in a variable first but when driving lookups from the Heat templates we can't do it. Change-Id: Ie31bb70314db44a0a18e86090cc74aa4df5de169