aboutsummaryrefslogtreecommitdiffstats
path: root/manifests/profile
AgeCommit message (Collapse)AuthorFilesLines
2016-10-05Change rabbitmq queues HA mode from ha-all to ha-exactlyMichele Baldessari1-1/+21
It turns out that reducing number of rabbitmq queues in cluster significantly improves performance of cluster especially in the case of failover recovery time. Right now the cluster uses ha-all mode for rabbitmq queues. It is best to change this to "ha-exactly" mode and reduce the number of queue copies to ceil(N/2) where N is number of controllers in the cluster - so in typical scenario of 3 controller It would be 2 by default. It does not make much sense to keep the copies of queues over whole cluster since if the quorum of nodes is lost then the rest of cluster nodes will be stopped anyway. We let the user override this with a parameter. I.e. for a 3 node controlplane cluster we will go from this: pcs resource show rabbitmq Resource: rabbitmq (class=ocf provider=heartbeat type=rabbitmq-cluster) Attributes: set_policy="ha-all ^(?!amq\.).* {"ha-mode":"all"}" To this: pcs resource show rabbitmq Resource: rabbitmq (class=ocf provider=heartbeat type=rabbitmq-cluster) Attributes: set_policy="ha-all ^(?!amq\.).* {"ha-mode":"exactly","ha-params":2}" According to Marin Krcmarik's testing recovery time from failure was reduced significantly. Co-Authored-By: Marian Krcmarik <mkrcmari@redhat.com> Change-Id: Ib62001c03e1e08f58cf0c6e0ba07a8879a584084 Partial-Bug: #1628998
2016-10-03Fix the timeout for pacemaker systemd resourcesMichele Baldessari32-10/+40
Back in the Mitaka cycle via the change If6b43982c958f63bc78ad997400bf1279c23df7e we made sure that the default start and stop timeouts for pacemaker systemd resources is 200s (>= twice the default 90s DefaultTimeoutStopSec in systemd). We did this change by setting puppet resource defaults for the Pacemaker::Resource::Service class: Pacemaker::Resource::Service { op_params => 'start timeout=200s stop timeout=200s', } The problem is that after the composable services rework, this does not work anymore and the pacemaker systemd resources that still exist do not have these timeouts set. We want to move away from resource defaults for this because its results are dependent on the inclusion order which in tripleo is not guaranteed any longer (https://docs.puppet.com/puppet/latest/reference/lang_scope.html#scope-lookup-rules) The only services affected in Newton are: cinder-volume, cinder-backup, manila-share, haproxy. I preferred fixing all the pacemaker resources because it seems the cleanest and most logical commit. Change-Id: If89a95706514e536a7a2949871a0002c79b6046e Closes-Bug: #1629366
2016-10-03Merge "Add swift proxy for ceilometer middleware"Jenkins1-0/+1
2016-10-03Merge "Cinder: Add iSCSI protocol parameter"Jenkins1-0/+6
2016-09-30Add ceilometer profile rspec testingAlex Schultz1-23/+45
This change adds rspec testing for the ceilometer profiles. While writing these tests, the tripleo::profile::base::ceilometer::collector class needed to have the hiera lookups moved to class parameters to allow for testing the possible options around the database backend. These tests add coverage for ipv4 and ipv6 configurations for the collector profile as well as excluding mongodb on the backend. Change-Id: I1abae040104e8492a9fe266de74080e1e7701731
2016-09-30telemetry: normalize coordination_urlEmilien Macchi3-3/+10
Normalize coordination_url for Telemetry services, so we can deploy them with IPv6. Change-Id: Ic6de09acf0d36ca90cc2041c0add1bc2b4a369a5 Partial-Bug: #1629279 Depends-On: I038e2bac22e3bfa5047d2e76e23cff664546464d
2016-09-28Merge "Move db syncs into mysql base role"Jenkins16-54/+63
2016-09-27Move db syncs into mysql base roleDan Prince16-54/+63
This patch moves the various DB syncs into the MySQL role. Database creation needs to occur on the MySQL server to avoid permission issues. This patch also moves database creation to step 2 so we can guarantee that all per-service databases exist at this time. This avoids complex ordering needed during step 3 where services, on different hosts, can run their own db sync's in a distributed fashion. Change-Id: I05cc0afa9373429a3197c194c3e8f784ae96de5f Partial-bug: #1620595
2016-09-26Merge "Add pameter for gmcast.listen_addr configuration"Jenkins1-4/+9
2016-09-26Merge "Make mysql bind-address configurable"Jenkins2-5/+14
2016-09-26Merge "Move inclusion of ::manila::db::mysql in manila/api profile"Jenkins5-33/+77
2016-09-26Add pameter for gmcast.listen_addr configurationJuan Antonio Osorio Robles1-4/+9
having an actual name for that configuration will allow us to pass a more proper name via t-h-t. Change-Id: Iea4bd67074824e5dc6732fd7e408743e693d80b3
2016-09-26Merge "Fix Swift manifest for Puppet4 deployment"Jenkins2-2/+2
2016-09-24Make mysql bind-address configurableJuan Antonio Osorio Robles2-5/+14
It used to be hardcoded that the bind-address was always coming from the $::hostname fact. This is wrong, as it disregards where we have configured the mysql address. This commit actually makes it configurable, so we'll be able to set it via hieradata. On the other hand, we use the hiera key that we already set 'mysql_bind_host' as a default; if, for some reason, that's unavailable then we fall back to $::hostname. Related-Bug: #1627060 Change-Id: I316acfd514aac63b84890e20283c4ca611ccde8b
2016-09-23Add swift proxy for ceilometer middlewarePradeep Kilambi1-0/+1
swift proxy has already been updated to use updated ceilometermiddleware as indicated here [1]. Include it in the proxy class. [1] https://github.com/openstack/puppet-swift/commit/e8ad981eff0f97c24a53197c42caf350627d3c9f Change-Id: Ie49f4a750368ff174b23b8d6baa743d0956d727e
2016-09-23Move inclusion of ::manila::db::mysql in manila/api profileGiulio Fidente5-33/+77
In puppet-manila it is the api service performing db sync, not scheduler. This change moves ::manila::db::mysql (which creates the empty database and users) in the tripleo manila/api profile. Also moves rabbit config into a general manila base profile as that would be needed by the scheduler service as well. Change-Id: I2b537f735b8d1be8f39e8c274be3872b193c1014
2016-09-23Add support for rabbit hosts to mistralBrad P. Crochet1-1/+8
The mistral puppet did not have support for configuring the rabbit hosts. This change adds that support. Change-Id: I6cb2cbf4a2abf494668d24b8c36b0d525643f0af
2016-09-21Merge "Manage tripleo-ui configuration files with puppet"Jenkins1-0/+2
2016-09-21Fix Swift manifest for Puppet4 deploymentEmilien Macchi2-2/+2
1) swift/ringbuilder: seed must be a String Because we use validate_re in puppet-swift and puppet4 requires the regex to be a string, not an integer. 2) Fix Swift package name In puppet4, we need the resource title, not the resource name. Change-Id: I50cea96d45e0eb46c19040d9a7105ab72c2dbef7
2016-09-21Merge "swift: normalize memcache servers IP addresses"Jenkins1-1/+1
2016-09-20swift: normalize memcache servers IP addressesEmilien Macchi1-1/+1
In the case of memcache servers are IPv6, make sure brackets set in the way we construct the list of memcache server + memcache port parameter. Also add unit-tests to test that the output is what we want in the configuration. Depends-On: I8d361ce9cfcfe6a3f8592b2b7991971a3c748c75 Closes-Bug: 1625335 Change-Id: I9fb8168d8fb56c9d8465d58a45fd8c6edfee6fdd
2016-09-20Fixup manila-cephfs native backend defaultsmarios1-41/+7
The puppet-tripleo side for manila-cephfs landed without specifying defaults for all class params [1] so when cephfs isn't enabled e.g. only generic, then you will get errors for those params. See review comments at [2] for reports of this. This will fixup the manila-cephfs puppet-tripleo side to be more in line with the tidy up adding netapp at [3]. The config is all moved tripleo-heat-templates side. The tht review for this is at https://review.openstack.org/#/c/358525/ and that will now depend on this review. [1] https://review.openstack.org/#/c/354047/ [2] https://review.openstack.org/#/c/354019/ [3] https://review.openstack.org/#/c/354014/ Change-Id: I918f6f23ae0bd3542bcfe1bf0c797d4e6aa8f4d9
2016-09-17Merge "Swift add_devices.pp IPv6 handling"Jenkins1-1/+4
2016-09-17Merge "Fix dependencies for HAProxy when certmonger is used"Jenkins1-0/+3
2016-09-17Merge "mysql: never add brackets to mysql_bind_host"Jenkins1-1/+1
2016-09-17Merge "Wait for MongoDB connections before creating replset"Jenkins1-0/+7
2016-09-16Wait for MongoDB connections before creating replsetJiri Stransky1-0/+7
Sometimes the mongodb_replset resource fails with: Could not evaluate: Can't find master host for replicaset tripleo. This issue is intermittent so the fix cannot be perfectly verified, but the assumption is that if we wait for MongoDB to be reachable on all nodes, it will assure that the members will appear to the puppet module as alive when creating or verifying the replset. If the validation fails, it should help us uncover which of the members was causing trouble. Change-Id: I0bcd0d063a7a766483426fdd5ea81cbe1dfaa348 Closes-Bug: #1624420
2016-09-16Swift add_devices.pp IPv6 handlingGabriele Cerami1-1/+4
Add brackets to IPv6 addresses before forming $object from $base Change-Id: I4568d538561a0102b69f331a122d4989333a3bfa Closes-Bug: #1623096
2016-09-16Merge "Add manila-netapp backend to manila class and tidy up generic"Jenkins1-81/+41
2016-09-16Add manila-netapp backend to manila class and tidy up genericmarios1-81/+41
This adds support for the manila-netapp backend. The backend specific config is set tht side. So this change also tidies up the manila generic config, which is unnecessarily being duplicated here ( see https://review.openstack.org/#/c/354019/ ) Change-Id: Ic6f8e8d27ca20b9badddea5d16550aa18bff8418
2016-09-16Manage tripleo-ui configuration files with puppetMartin André1-0/+2
This commit ensures the tripleo-ui configuration files are present and are matching the environment. Change-Id: I0deeffa9026b1f5cd36a9810aaee7832e31c3c93
2016-09-16mysql: never add brackets to mysql_bind_hostEmilien Macchi1-1/+1
Don't add brackets on mysql_bind_host parameter in Galera config. Having brackets from this parameter works with old version of Galera but not newest one. So let's remove them at all, so we can safely upgrade Galera in RDO. Change-Id: Ic904d4efda162f18ec8dffb91c2f383f54361f41 Closes-Bug: #1622755
2016-09-15Fix dependencies for HAProxy when certmonger is usedJuan Antonio Osorio Robles1-0/+3
Installing the undercloud with generate_service_certificate=True fails if HAProxy is not pre-installed. This is due to missing dependency setting on our puppet manifests. We need to specify that the PEM file needs to be written only if the haproxy user and group exist (which comes from the package) and that the haproxy frontend configuration needs to be notified if there are changes in the certificates. Change-Id: Iba3030e4489eb31f9c07ab49913687d8b595a91b Closes-Bug: #1623805
2016-09-12Add validations profile for tripleoTomas Sedovic1-0/+29
This adds the tripleo::profile::base::validations profile which sets up the `validations` user and installs the openstack-tripleo-validations package. Change-Id: Ib2b1ddcda3a41cb7263171d3024f05ba8bfd2f28
2016-09-09Merge "Add Ceph RGW profile"Jenkins1-0/+63
2016-09-08Cinder: Add iSCSI protocol parameterDimitri Savineau1-0/+6
This patch allows to spefify the iscsi_protocol in the iSCSI cinder backend when we want to use iSCSI Extensions for RDMA (iSER). The default value remains 'iscsi'. Change-Id: I6d2c4d71fb3ab1f7749d6e1defb59e86b9364cc1
2016-09-07gnocchi: move statsd and metricd at step5Emilien Macchi2-2/+6
Gnocchi statsd and metricd require Keystone resources to be in place when using Swift backend, because those services will try to access to Swift containers. To do so, we want to move the service start at step 5 instead of 4 and also require Keystone resource to be managed before starting the services. Change-Id: Ie5bc1481a8700c7cd080a76d0978146a84825767 Closes-Bug: #1621164
2016-09-06Merge "Include heat base profile outside of step"Jenkins4-4/+8
2016-09-06Merge "Add Ceph RGW listener to HAProxy"Jenkins1-0/+3
2016-09-06Merge "Convert ringbuilder to build devices array"Jenkins1-4/+26
2016-09-05Merge "Ironic: update included drivers"Jenkins1-3/+7
2016-09-05Merge "Ironic: manage PXE environment for conductors"Jenkins1-0/+8
2016-09-05Merge "updates to fluentd support"Jenkins2-39/+180
2016-09-04Ironic: update included driversDmitry Tantsur1-3/+7
Configure drac, ilo and ssh drivers out of box. Remove deprecated ironic::drivers::deploy. This change brings the default driver list closer to one of undercloud. Change-Id: I8b9a136a0ff22916d7c468bbb0df7248bc35a5c2 Partially-Implements: blueprint ironic-integration
2016-09-03Merge "Make service profiles default to rabbitmq_node_ips"Jenkins11-11/+85
2016-09-02Merge "Plumgrid helper"Jenkins1-0/+45
2016-09-02Merge "Opencontrail vrouter profile"Jenkins1-0/+40
2016-09-02Plumgrid helperDan Prince1-0/+45
Extra settings that need to be applied for plumgrid where compute nodes are running. Change-Id: Ided5483f0f36f0efd5a09112832d07f028a2a7f9
2016-09-02Convert ringbuilder to build devices arraySteven Hardy1-4/+26
Currently we have some hard-coded mangling in t-h-t but we instead need to build the array based on the nodes running swift storage, combined with the SwiftRawDisks parameter. This will enable running SwiftStorage on nodes other than Controller and SwiftStorage roles, and is required for custom-roles due to the hard-coded stuff in the role templates and overcloud.yaml Change-Id: I11deed1df712ecccf85d36a75b3bd2e9d226af36 Partially-Implements: blueprint custom-roles
2016-09-02Merge "Create memcache_servers list in swift proxy profile"Jenkins1-1/+14