summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2017-07-06Add option for innodb_flush_log_at_trx_commit = 2 for Galera onlyMike Bayer2-35/+61
The innodb_flush_log_at_trx_commit flag changes the timing of when the log buffer is written to disk for writes. At its default of 1, transactions are written to disk and the buffer flushed on a per-transaction basis; but when set to 2, the flush of the buffer proceeds only once per second. This removes the durability guarantee for the single node. However the central concept of Galera is that durability is achieved via the cluster as a whole, in that transactions are replicated to other nodes before the commit succeeds (though not necessarily written to disk unless wsrep_causal_reads is set). In this model, data would only be lost of all nodes of the Galera cluster were killed within one second of each other. Percona's blog post at https://www.percona.com/blog/2014/11/17/typical-misconceptions-on-galera-for-mysql/ recommends that the value of 2 should be considered "safe" for a Galera cluster unless you are in fact worried that all three nodes will be powered off simultaneously. The value here is added as an option only, defaulting to the usual default of "1", flush per transaction. Change-Id: Id5a30f1daf978e094a74db2d284febbc9ae64bb3
2017-07-02Fix openstackdocsthemeZhongShengping2-5/+10
See the docs[0] how to use it. Also add the variables for the bug log feature. [0]https://docs.openstack.org/openstackdocstheme/latest/ Change-Id: I11b183986a389291d9ab02cb1d0be36c3d73bdb0
2017-06-30Merge "Merge the nova HAproxy TLS options"Jenkins1-1/+1
2017-06-29Zaqar: support configurable backendsDan Prince2-12/+45
This patch updates the Zaqar profile so that we have support for configuring alternate versions of the messaging and management backends. In Pike instack-undercloud started using the swift/sqlalchemy backends and the intent here is to update the new containers undercloud to use a similar default (thus letting us drop Mongodb). Change-Id: Ie6a56b9163950cee2c0341afa0c0ddce665f3704
2017-06-28Merge the nova HAproxy TLS optionsRob Crittenden1-1/+1
This makes sure that we set the necessary options so HAProxy uses TLS to contact nova. It was commented out when nova was moved to not run over httpd. Since that is no longer the case we can re-enable it. Change-Id: I026a7dab30b00a4e93966f650f098c570b0b624b Depends-On: Iac35b7ddcd8a800901548c75ca8d5083ad17e4d3
2017-06-28Merge "Split docker options and insecure registry"Jenkins2-12/+21
2017-06-27Merge "Change CRL refresh to run every 2 hours"Jenkins1-3/+3
2017-06-27Split docker options and insecure registryBogdan Dobrelya2-12/+21
Use augeas to modify only parameters' dedicated configuration. Split options from insecure registry. Overlapping those params may unschedule the docker service restarts for some cases, ending up with a split brain state for the docker service run-time config vs changed /etc/sysconfig/options config. Change-Id: Ic5640061837b022f7175f0db0dc269f9a61e6023 Signed-off-by: Bogdan Dobrelya <bdobreli@redhat.com>
2017-06-27Always start httpd at the same time (TLS proxy)Juan Antonio Osorio Robles2-7/+21
For the TLS everywhere job, there are some apache vhosts set up that serve as TLS proxies. These need to be started at the same time as the rest of the apache vhosts too. Change-Id: I15e67c7c04142cff01704e2590d3b2a6a949cc06
2017-06-27Always start httpd at the same timeJuan Antonio Osorio Robles14-23/+186
Puppet wipes out whatever is not in it's resource catalog each run for httpd. This causes httpd to restart if in the next step there are reasources added that were not there earlier. This patch, thus changes the instances of httpd to start at the same time: On step 3 for the bootstrap node, and on step 4 for every other node. Closes-Bug: #1699502 Change-Id: I3d29728c1ab7bd5b78100f89e00e5fa082f97b0c Co-Authored-By: Alex Schultz <aschultz@redhat.com>
2017-06-27Merge "MySQL: configure ::zaqar::db::mysql selectively"Jenkins1-0/+4
2017-06-26MySQL: configure ::zaqar::db::mysql selectivelyDan Prince1-0/+4
Adds the ability to create an empty MySQL database for Zaqar if zaqar is enabled and settings for the mysql backend are also available in hiera. This should allow Zaqar's database to get created when needed, but skipped if MongoDB is used instead (per overcloud defaults). Change-Id: I3598e39c0a3cdf80b96e728d9aa8a7e6505e0690
2017-06-26Change CRL refresh to run every 2 hoursJuan Antonio Osorio Robles1-3/+3
The default CA issues CRLs for 4 hours by default. So we need to change these values to reflect this, else we'll get verification issues due to the CRL having expired before its refreshed. However, the nextupdate value for the CRLs might not be aligned with the cron job. And getting this alignment is not entirely trivial. So I opted for updating every 2 hours to address this. Change-Id: I732b400462c5cabd7c6c18c007fc9e8c87b700d3
2017-06-26Force MySQL users to use SSL if internal TLS is enabledJuan Antonio Osorio Robles1-0/+3
This forces the MySQL users to use SSL when connecting to MySQL. bp tls-via-certmonger Depends-On: I24e4c195a31109835739e78a6b53d36f661f9fd0 Change-Id: I98856955132b680a159144204da1d5b400fe9794
2017-06-26Switch from oslosphinx to openstackdocsthemeZhongShengping2-4/+5
As part of the docs migration work[0] for Pike we need to switch to use the openstackdocstheme. [0]https://review.openstack.org/#/c/472275/ Change-Id: Ic82c4a2ec9fe26c8621ab2c7c9598b1582f73156
2017-06-23Merge "Remove manifest/profile/baseui.pp"Jenkins1-22/+0
2017-06-23Merge "Make collectd to log also to file"Jenkins1-0/+9
2017-06-22Merge "Deploy ironic-api with WSGI"Jenkins1-3/+55
2017-06-21Merge "Adds OpenDaylight resources for configuring cluster with docker"Jenkins2-0/+88
2017-06-21Merge "Ignore failures when loading nf_conntrack_proto_sctp kernel module"Jenkins3-5/+91
2017-06-21Merge "Enable TLS for MySQL's replication traffic"Jenkins1-6/+43
2017-06-21Make collectd to log also to fileMartin Mágr1-0/+9
This change will make possible to set collectd to log to file (/var/log/collectd.log by default). Change-Id: I50289ad6657852d37abbf12938128ff9ab9e3bac
2017-06-21Deploy ironic-api with WSGIDmitry Tantsur1-3/+55
Change-Id: I952c86db88dcd611722a3feaea88f618eee17620
2017-06-21Merge "Make enabling haproxy stats interface configurable"Jenkins1-13/+20
2017-06-21Merge "Allow certmonger mysql resource to use several DNS names"Jenkins1-1/+8
2017-06-21Enable TLS for MySQL's replication trafficJuan Antonio Osorio Robles1-6/+43
This enables the options so Galera can use TLS for the replication traffic. bp tls-via-certmonger Depends-On: I9252303b92a2805ba83f86a85770db2551a014d3 Change-Id: I2ee3bf4bbda3f65f5b03440ecbc75f14225a2428
2017-06-21Allow certmonger mysql resource to use several DNS namesJuan Antonio Osorio Robles1-1/+8
This allows for several SubjectAltNames which will subsequently be used for the replication traffic as well. bp tls-via-certmonger Change-Id: Ic68266eaf39d6803f7c3e299095578bbcfd63b88
2017-06-20Merge "Add maxconn parameter to MySQL / HAProxy"Jenkins4-0/+130
2017-06-20Ignore failures when loading nf_conntrack_proto_sctp kernel moduleOr Idgar3-5/+91
Ignore failures if nf_conntrack_proto_sctp module failed to load. Since RHEL 7.4, nf_conntrack_proto_sctp module is compiled into the kernel instead of as a module as the sctp support. TripleO will still try to load the module to support RHEL 7.3, but in the future will remove the module management and rely on the kernel provided in newer versions of RHEL. Co-Authored-By: Or Idgar <oidgar@redhat.com> Co-Authored-By: Alex Schultz <aschultz@redhat.com> Co-Authored-By: Emilien Macchi <emilien@redhat.com> Change-Id: I8f1c841a7c0f3b1247aba2b959b6dfbe43d8cd79 Closes-Bug: 1695885
2017-06-20Merge "Require the UI package when creating the virtual host"Jenkins2-4/+3
2017-06-20Make enabling haproxy stats interface configurableJuan Antonio Osorio Robles1-13/+20
Some people might or might not want to enable it. So this makes it configurable. It defaults to true as we were always deploying it before. Change-Id: I8d2a08cdaf3e5ec3d1a69d4f95e57522508c8610
2017-06-20Add maxconn parameter to MySQL / HAProxyMike Bayer4-0/+130
Allows configurability of maxconn as applies to the MySQL section of the HAProxy config, both for clustercheck and single node. Also adds a new test for the haproxy class overall to exercise options. Change-Id: I023682dd5e85cc78d6dd3e5214a53863acc4f303
2017-06-19Merge "Fix the port for Panko API"Jenkins1-2/+2
2017-06-19Remove manifest/profile/baseui.ppCarlos Camacho1-22/+0
This file is not needed anymore. Change-Id: I904443624c18cc5116bc6027c016b9ccdd5e10aa Closes-bug: 1698105 Depends-On: Ie20ecabea91ca4c2040c5ef3bf6c71b2b53d26ef
2017-06-19Require the UI package when creating the virtual hostCarlos Camacho2-4/+3
Quickstart is failing with this error: Error: Cannot create /var/www/openstack-tripleo-ui/dist; parent directory /var/www/openstack-tripleo-ui does not exist Error: /Stage[main]/Tripleo::Ui/Apache::Vhost[tripleo-ui]/File[/var/www/openstack-tripleo-ui/dist] ensure: change from absent to directory failed: Cannot create /var/www/openstack-tripleo-ui/dist; parent directory /var/www/openstack-tripleo-ui does not exist Puppet cant create the folders tree by itself. Closes-bug: 1698105 Change-Id: I5cce963a6225552f4b7253cb34edc72b392b9dda
2017-06-19Merge "Fixes an issue when rebooting with an NFS mount."Jenkins1-1/+1
2017-06-19Merge "Addition of Nuage as mechanism driver for ML2"Jenkins2-0/+35
2017-06-16Merge "Ensure hiera step value is an integer"Jenkins176-177/+177
2017-06-16Merge "For http service endpoints always redirect to https"Jenkins2-13/+15
2017-06-16Merge "Only set the stonith property on the pacemaker_master node"Jenkins2-10/+5
2017-06-16For http service endpoints always redirect to httpsJuan Antonio Osorio Robles2-13/+15
If public TLS is enabled, this sets as default that services should always redirect to https. Change-Id: I19b9d07ac8925366ed27fefcaca4fdb9a9ab1b37
2017-06-15Fix redis when hostname has capital lettersAlex Schultz3-1/+108
The bootstrap_nodeid comparison should be case insensitive. Change-Id: I1e6672bb0219c1cf56ab21dd911c6f33e2436cc3 Closes-Bug: #1698190
2017-06-15Move gnocchi upgrade and api to step 4Pradeep Kilambi2-32/+14
gnocchi upgrade requires storage sacks to be initialized. This means we need to ensure the storage backends are up before running the upgrade and starting the api. Lets move the api to step 4 so we can ensure other dependencies are in place. Co-Authored-By: Juan Antonio Osorio Robles <jaosorior@redhat.com> Depends-On: Ibfa9fb39f60c1e4a802d189b32ff4c34476c93d3 Change-Id: If2ae48b21389e76fd638c0b48c148a5d4f227630
2017-06-14Addition of Nuage as mechanism driver for ML2lokesh-jain2-0/+35
Adding Nuage as mechanism driver where ML2 is the neutron core plugin. ML2 base profile includes Nuage when mechanism driver is Nuage. Added Nuage neutron ML2 profile for tripleo. Change-Id: Ib56a7ad8f43fc6274eebc83bd2a62e68c030599d
2017-06-14Merge "Do not create VIP for pacemaker OVN OCF resource"Jenkins1-29/+7
2017-06-14Merge "Remove condition to match hdr(host) in haproxy redirect rule"Jenkins1-1/+1
2017-06-14Only set the stonith property on the pacemaker_master nodeMichele Baldessari2-10/+5
It makes little sense to enforce the stonith property on remote nodes and/or all cluster nodes. We can just enforce it once on the pacemaker_master node as it is a cluster-wide property anyway. We can also remove the tripleo::fencing -> pacemaker::stonith constraint in the pacemaker remote profile now as the fencing stuff happens on step 5 anyway and the property is set at step 1. While this works in general it creates extra CIB changes for nothing and slows down the deployment. Change-Id: Ifef08033043a4cc90a6261e962d2fdecdf275650 Closes-Bug: #1696336
2017-06-14Ensure hiera step value is an integerSteve Baker176-177/+177
The step is typically set with the hieradata setting an integer value: {"step": 1} However it would be useful for the value to be a string so that substitutions are possible, for example: {"step": "%{::step}"} This change ensures the step parameter defaults to an integer by calling Integer(hiera('step')) This change was made by manually removing the undef defaults from fluentd.pp, uchiwa.pp, and sensu.pp then bulk updating with: find ./ -type f -print0 |xargs -0 sed -i "s/= hiera('step')/= Integer(hiera('step'))/" Change-Id: I8a47ca53a7dea8391103abcb8960a97036a6f5b3
2017-06-14Merge "Changed author"Jenkins1-1/+1
2017-06-14Merge "Add environment variable"Jenkins1-1/+1