diff options
| -rw-r--r-- | manifests/database/mysql.pp | 367 | ||||
| -rw-r--r-- | templates/database/clustercheck.erb | 56 | ||||
| -rw-r--r-- | templates/database/debian.cnf.erb | 13 | ||||
| -rwxr-xr-x | templates/database/etc_initd_mysql_Debian | 202 | ||||
| -rwxr-xr-x | templates/database/etc_initd_mysql_RedHat | 48 | ||||
| -rw-r--r-- | templates/database/mysql.conf.erb | 69 | ||||
| -rw-r--r-- | templates/database/mysqlchk.erb | 23 |
7 files changed, 778 insertions, 0 deletions
diff --git a/manifests/database/mysql.pp b/manifests/database/mysql.pp new file mode 100644 index 0000000..dae80b3 --- /dev/null +++ b/manifests/database/mysql.pp @@ -0,0 +1,367 @@ +# +# Copyright (C) 2015 eNovance SAS <licensing@enovance.com> +# +# Licensed under the Apache License, Version 2.0 (the "License"); you may +# not use this file except in compliance with the License. You may obtain +# a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless optional by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT +# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the +# License for the specific language governing permissions and limitations +# under the License. +# +# == Class: tripleo::database::mysql +# +# Configure a MySQL for TripleO with or without HA. +# +# === Parameters +# +# [*bind_address*] +# (optional) IP to bind MySQL daemon. +# Defaults to undef +# +# [*mysql_root_password*] +# (optional) MySQL root password. +# Defaults to 'secrete' +# +# [*mysql_sys_maint_password*] +# (optional) The MySQL debian-sys-maint password. +# Debian only parameter. +# Defaults to 'sys-maint' +# +# [*galera_clustercheck_dbpassword*] +# (optional) The MySQL password for Galera cluster check +# Defaults to 'password' +# +# [*galera_clustercheck_dbuser*] +# (optional) The MySQL username for Galera cluster check (using monitoring database) +# Defaults to 'clustercheck' +# +# [*galera_clustercheck_ipaddress*] +# (optional) The name or ip address of host running monitoring database (clustercheck) +# Defaults to undef +# +# [*galera_gcache*] +# (optional) Size of the Galera gcache +# wsrep_provider_options, for master/slave mode +# Defaults to '1G' +# +# [*galera_master*] +# (optional) Hostname or IP of the Galera master node, databases and users +# resources are created on this node and propagated on the cluster. +# Defining to false means we disable MySQL HA and run a single node setup. +# Defaults to false +# +# [*controller_host*] +# (optional) Array of internal ip of the controller nodes. +# They need access to all OpenStack databases. +# Defaults to false +# +# [*database_host*] +# (optional) Array of internal ip of the database nodes. +# Used to boostrap Galera cluster. +# Defaults to false +# +# [*ceilometer_database_connection*] +# (optional) URL to connect at Ceilometer database. +# Example: 'mysql://user:password@host/database' +# Defaults to undef +# +# [*cinder_database_connection*] +# (optional) URL to connect at Cinder database. +# Example: 'mysql://user:password@host/database' +# Defaults to undef +# +# [*glance_database_connection*] +# (optional) URL to connect at Glance database. +# Example: 'mysql://user:password@host/database' +# Defaults to undef +# +# [*heat_database_connection*] +# (optional) URL to connect at Heat database. +# Example: 'mysql://user:password@host/database' +# Defaults to undef +# +# [*keystone_database_connection*] +# (optional) URL to connect at Keystone database. +# Example: 'mysql://user:password@host/database' +# Defaults to undef +# +# [*neutron_database_connection*] +# (optional) URL to connect at Neutron database. +# Example: 'mysql://user:password@host/database' +# Defaults to undef +# +# [*nova_database_connection*] +# (optional) URL to connect at Nova database. +# Example: 'mysql://user:password@host/database' +# Defaults to undef +# +class tripleo::database::mysql ( + $bind_address = undef, + $mysql_root_password = 'secrete', + $mysql_sys_maint_password = 'sys-maint', + $galera_clustercheck_dbpassword = 'secrete', + $galera_clustercheck_dbuser = 'clustercheck', + $galera_clustercheck_ipaddress = undef, + $galera_gcache = '1G', + $galera_master = false, + $controller_host = false, + $database_host = false, + $ceilometer_database_connection = undef, + $cinder_database_connection = undef, + $glance_database_connection = undef, + $heat_database_connection = undef, + $keystone_database_connection = undef, + $neutron_database_connection = undef, + $nova_database_connection = undef, +) { + + include ::xinetd + + $gcomm_definition = inline_template('<%= @database_host.join(",") + "?pc.wait_prim=no" -%>') + + # If HA enabled + if $galera_master { + # Specific to Galera master node + if $::hostname == $galera_master { + mysql_database { 'monitoring': + ensure => 'present', + charset => 'utf8', + collate => 'utf8_unicode_ci', + require => File['/root/.my.cnf'] + } + mysql_user { "${galera_clustercheck_dbuser}@localhost": + ensure => 'present', + password_hash => mysql_password($galera_clustercheck_dbpassword), + require => File['/root/.my.cnf'] + } + mysql_grant { "${galera_clustercheck_dbuser}@localhost/monitoring": + ensure => 'present', + options => ['GRANT'], + privileges => ['ALL'], + table => 'monitoring.*', + user => "${galera_clustercheck_dbuser}@localhost", + } + Database_user<<| |>> + } else { + # NOTE(sileht): Only the master must create the password + # into the database, slave nodes must just use the password. + # The one in the database have been retrieved via galera. + file { "${::root_home}/.my.cnf": + content => "[client]\nuser=root\nhost=localhost\npassword=${mysql_root_password}\n", + owner => 'root', + mode => '0600', + } + } + + # Specific to Red Hat or Debian systems + case $::osfamily { + 'RedHat': { + $mysql_server_package_name = 'mariadb-galera-server' + $mysql_client_package_name = 'mariadb' + $wsrep_provider = '/usr/lib64/galera/libgalera_smm.so' + $mysql_server_config_file = '/etc/my.cnf' + $mysql_init_file = '/usr/lib/systemd/system/mysql-bootstrap.service' + + if $::hostname == $galera_master { + $mysql_service_name = 'mysql-bootstrap' + } else { + $mysql_service_name = 'mariadb' + } + + # In Red Hat, the package does not perform the mysql db installation. + # We need to do this manually. + # Note: in MariaDB repository, package perform this action in post-install, + # but MariaDB is not packaged for Red Hat / CentOS 7 in MariaDB repository. + exec { 'bootstrap-mysql': + command => '/usr/bin/mysql_install_db --rpm --user=mysql', + unless => 'test -d /var/lib/mysql/mysql', + before => Service['mysqld'], + require => [Package[$mysql_server_package_name], File[$mysql_server_config_file]] + } + + } + 'Debian': { + $mysql_server_package_name = 'mariadb-galera-server' + $mysql_client_package_name = 'mariadb-client' + $wsrep_provider = '/usr/lib/galera/libgalera_smm.so' + $mysql_server_config_file = '/etc/mysql/my.cnf' + $mysql_init_file = '/etc/init.d/mysql-bootstrap' + + if $::hostname == $galera_master { + $mysql_service_name = 'mysql-bootstrap' + } else { + $mysql_service_name = 'mysql' + } + + mysql_user { 'debian-sys-maint@localhost': + ensure => 'present', + password_hash => mysql_password($mysql_sys_maint_password), + require => File['/root/.my.cnf'] + } + + file{'/etc/mysql/debian.cnf': + ensure => file, + content => template('tripleo/database/debian.cnf.erb'), + owner => 'root', + group => 'root', + mode => '0600', + require => Exec['clean-mysql-binlog'], + } + } + default: { + err "${::osfamily} not supported yet" + } + } + + file { $mysql_init_file : + content => template("tripleo/database/etc_initd_mysql_${::osfamily}"), + owner => 'root', + mode => '0755', + group => 'root', + notify => Service['mysqld'], + before => Package[$mysql_server_package_name], + } + + class { 'mysql::server': + manage_config_file => false, + config_file => $mysql_server_config_file, + package_name => $mysql_server_package_name, + service_name => $mysql_service_name, + override_options => { + 'mysqld' => { + 'bind-address' => $bind_address, + } + }, + root_password => $mysql_root_password, + notify => Service['xinetd'], + } + + file { $mysql_server_config_file: + content => template('tripleo/database/mysql.conf.erb'), + mode => '0644', + owner => 'root', + group => 'root', + notify => [Service['mysqld'],Exec['clean-mysql-binlog']], + require => Package[$mysql_server_package_name], + } + + class { 'mysql::client': + package_name => $mysql_client_package_name, + } + + # Haproxy http monitoring + augeas { 'mysqlchk': + context => '/files/etc/services', + changes => [ + 'ins service-name after service-name[last()]', + 'set service-name[last()] "mysqlchk"', + 'set service-name[. = "mysqlchk"]/port 9200', + 'set service-name[. = "mysqlchk"]/protocol tcp', + ], + onlyif => 'match service-name[. = "mysqlchk"] size == 0', + notify => [ Service['xinetd'], Exec['reload_xinetd'] ] + } + file { + '/etc/xinetd.d/mysqlchk': + content => template('tripleo/database/mysqlchk.erb'), + owner => 'root', + group => 'root', + mode => '0755', + require => File['/usr/bin/clustercheck'], + notify => [ Service['xinetd'], Exec['reload_xinetd'] ]; + '/usr/bin/clustercheck': + ensure => present, + content => template('tripleo/database/clustercheck.erb'), + mode => '0755', + owner => 'root', + group => 'root'; + } + + exec{'clean-mysql-binlog': + # first sync take a long time + command => "/bin/bash -c '/usr/bin/mysqladmin --defaults-file=/root/.my.cnf shutdown ; /bin/rm ${::mysql::params::datadir}/ib_logfile*'", + path => '/usr/bin', + notify => Service['mysqld'], + refreshonly => true, + onlyif => "stat ${::mysql::params::datadir}/ib_logfile0 && test `du -sh ${::mysql::params::datadir}/ib_logfile0 | cut -f1` != '256M'", + } + } else { + # When HA is disabled + class { 'mysql::server': + override_options => { + 'mysqld' => { + 'bind-address' => $bind_address, + } + }, + root_password => $mysql_root_password, + } + } + + # On master node (when using Galera) or single node (when no HA) + if $galera_master == $::hostname or ! $galera_master { + # Create all the database schemas + $allowed_hosts = ['%',$controller_host] + $keystone_dsn = split($keystone_database_connection, '[@:/?]') + class { 'keystone::db::mysql': + user => $keystone_dsn[3], + password => $keystone_dsn[4], + host => $keystone_dsn[5], + dbname => $keystone_dsn[6], + allowed_hosts => $allowed_hosts, + } + $glance_dsn = split($glance_database_connection, '[@:/?]') + class { 'glance::db::mysql': + user => $glance_dsn[3], + password => $glance_dsn[4], + host => $glance_dsn[5], + dbname => $glance_dsn[6], + allowed_hosts => $allowed_hosts, + } + $nova_dsn = split($nova_database_connection, '[@:/?]') + class { 'nova::db::mysql': + user => $nova_dsn[3], + password => $nova_dsn[4], + host => $nova_dsn[5], + dbname => $nova_dsn[6], + allowed_hosts => $allowed_hosts, + } + $neutron_dsn = split($neutron_database_connection, '[@:/?]') + class { 'neutron::db::mysql': + user => $neutron_dsn[3], + password => $neutron_dsn[4], + host => $neutron_dsn[5], + dbname => $neutron_dsn[6], + allowed_hosts => $allowed_hosts, + } + $cinder_dsn = split($cinder_database_connection, '[@:/?]') + class { 'cinder::db::mysql': + user => $cinder_dsn[3], + password => $cinder_dsn[4], + host => $cinder_dsn[5], + dbname => $cinder_dsn[6], + allowed_hosts => $allowed_hosts, + } + $heat_dsn = split($heat_database_connection, '[@:/?]') + class { 'heat::db::mysql': + user => $heat_dsn[3], + password => $heat_dsn[4], + host => $heat_dsn[5], + dbname => $heat_dsn[6], + allowed_hosts => $allowed_hosts, + } + $ceilometer_dsn = split($ceilometer_database_connection, '[@:/?]') + class { 'ceilometer::db::mysql': + user => $ceilometer_dsn[3], + password => $ceilometer_dsn[4], + host => $ceilometer_dsn[5], + dbname => $ceilometer_dsn[6], + allowed_hosts => $allowed_hosts, + } + } + +} diff --git a/templates/database/clustercheck.erb b/templates/database/clustercheck.erb new file mode 100644 index 0000000..cc3231b --- /dev/null +++ b/templates/database/clustercheck.erb @@ -0,0 +1,56 @@ +#!/bin/bash +# Managed by puppet +# +# Script to make a proxy (ie HAProxy) capable of monitoring Galera cluster +# +# Author: Olaf van Zandwijk <olaf.vanzandwijk@nedap.com> +# Mehdi Abaakouk <mehdi.abaakouk@enovance.com> +# +# Documentation and download: https://github.com/olafz/percona-clustercheck +# +# Based on the original script from Unai Rodriguez +# +MYSQL_USERNAME='<%= @galera_clustercheck_dbuser %>' +MYSQL_PASSWORD='<%= @galera_clustercheck_dbpassword %>' + +TIMEOUT=10 +ERR_FILE="/dev/null" +AVAILABLE_WHEN_DONOR=0 + +MYSQL_CMDLINE="mysql -nNE --connect-timeout=$TIMEOUT --user=${MYSQL_USERNAME} --password=${MYSQL_PASSWORD} " + +mysql_get_status(){ + ( $MYSQL_CMDLINE -e "SHOW STATUS LIKE '$1';" | tail -1 ) 2>>${ERR_FILE} +} +mysql_get_var(){ + ( $MYSQL_CMDLINE -e "SHOW GLOBAL VARIABLES LIKE '$1';" | tail -1 ) 2>>${ERR_FILE} +} + +http_response(){ + status=$1 + shift + msg="$@" + if [ "$status" == 200 ]; then + /bin/echo -en "HTTP/1.1 200 OK\r\n" + else + /bin/echo -en "HTTP/1.1 503 Service Unavailable\r\n" + fi + /bin/echo -en "Content-Type: text/plain\r\n" + /bin/echo -en "\r\n" + /bin/echo -en "$msg\r\n" + /bin/echo -en "\r\n" +} + + +WSREP_LOCAL_STATE=$(mysql_get_status wsrep_local_state) +WSREP_READY=$(mysql_get_status wsrep_ready) +WSREP_CONNECTED=$(mysql_get_status wsrep_connected) +READY_ONLY=$(mysql_get_var read_only) + +case ${AVAILABLE_WHEN_DONOR}-${WSREP_LOCAL_STATE}-${WSREP_READY}-${WSREP_CONNECTED}-${READY_ONLY} in + 1-2-ON-ON-OFF|0-4-ON-ON-OFF) http_response 200 "Mariadb Cluster Node is synced, ready and connected." ;; + *-*-OFF-*-*) http_response 503 "Mariadb Cluster Node is not ready." ;; + *-*-*-OFF-*) http_response 503 "Mariadb Cluster Node is not connected" ;; + *-*-*-*-ON) http_response 503 "Mariadb Cluster Node is readonly" ;; + *) http_response 503 "Mariadb Cluster Node is not synced" ;; +esac diff --git a/templates/database/debian.cnf.erb b/templates/database/debian.cnf.erb new file mode 100644 index 0000000..ddcc442 --- /dev/null +++ b/templates/database/debian.cnf.erb @@ -0,0 +1,13 @@ +# Managed by Puppet +# +[client] +host = localhost +user = debian-sys-maint +password = <%= @mysql_sys_maint_password %> +socket = /var/run/mysqld/mysqld.sock +[mysql_upgrade] +host = localhost +user = debian-sys-maint +password = <%= @mysql_sys_maint_password %> +socket = /var/run/mysqld/mysqld.sock +basedir = /usr diff --git a/templates/database/etc_initd_mysql_Debian b/templates/database/etc_initd_mysql_Debian new file mode 100755 index 0000000..292251f --- /dev/null +++ b/templates/database/etc_initd_mysql_Debian @@ -0,0 +1,202 @@ +#!/bin/bash +# +### BEGIN INIT INFO +# Provides: mysql-bootstrap +# Required-Start: $remote_fs $syslog +# Required-Stop: $remote_fs $syslog +# Should-Start: $network $named $time +# Should-Stop: $network $named $time +# Default-Start: 2 3 4 5 +# Default-Stop: 0 1 6 +# Short-Description: Start and stop the mysql database server daemon +# Description: Controls the main MariaDB database server daemon "mysqld" +# and its wrapper script "mysqld_safe". +### END INIT INFO +# +# Managed by Puppet +# +MYSQLD_STARTUP_TIMEOUT=${MYSQLD_STARTUP_TIMEOUT:-60} +[ -e /etc/mysql/my.cnf ] && \ + MYSQLD_DATA_DIR=$(awk -F= '/^datadir/{print $2}' /etc/mysql/my.cnf | sed -e 's/^ *//') +MYSQLD_DATA_DIR=${MYSQLD_DATA_DIR:-<%= scope.lookupvar('::mysql::datadir') %>} +set -e +set -u +${DEBIAN_SCRIPT_DEBUG:+ set -v -x} + +test -x /usr/sbin/mysqld || exit 0 + +. /lib/lsb/init-functions + +SELF=$(cd $(dirname $0); pwd -P)/$(basename $0) +CONF=/etc/mysql/my.cnf +MYADMIN="/usr/bin/mysqladmin --defaults-file=/etc/mysql/debian.cnf" + +# priority can be overriden and "-s" adds output to stderr +ERR_LOGGER="logger -p daemon.err -t /etc/init.d/mysql -i" + +# Safeguard (relative paths, core dumps..) +cd / +umask 077 + +# mysqladmin likes to read /root/.my.cnf. This is usually not what I want +# as many admins e.g. only store a password without a username there and +# so break my scripts. +export HOME=/etc/mysql/ + +## Fetch a particular option from mysql's invocation. +# +# Usage: void mysqld_get_param option +mysqld_get_param() { + /usr/sbin/mysqld --print-defaults \ + | tr " " "\n" \ + | grep -- "--$1" \ + | tail -n 1 \ + | cut -d= -f2 +} + +## Do some sanity checks before even trying to start mysqld. +sanity_checks() { + # check for config file + if [ ! -r /etc/mysql/my.cnf ]; then + log_warning_msg "$0: WARNING: /etc/mysql/my.cnf cannot be read. See README.Debian.gz" + echo "WARNING: /etc/mysql/my.cnf cannot be read. See README.Debian.gz" | $ERR_LOGGER + fi + + # check for diskspace shortage + datadir=`mysqld_get_param datadir` + if LC_ALL=C BLOCKSIZE= df --portability $datadir/. | tail -n 1 | awk '{ exit ($4>4096) }'; then + log_failure_msg "$0: ERROR: The partition with $datadir is too full!" + echo "ERROR: The partition with $datadir is too full!" | $ERR_LOGGER + exit 1 + fi +} + +## Checks if there is a server running and if so if it is accessible. +# +# check_alive insists on a pingable server +# check_dead also fails if there is a lost mysqld in the process list +# +# Usage: boolean mysqld_status [check_alive|check_dead] [warn|nowarn] +mysqld_status () { + ping_output=`$MYADMIN ping 2>&1`; ping_alive=$(( ! $? )) + + ps_alive=0 + pidfile=`mysqld_get_param pid-file` + if [ -f "$pidfile" ] && ps `cat $pidfile` >/dev/null 2>&1; then ps_alive=1; fi + + if [ "$1" = "check_alive" -a $ping_alive = 1 ] || + [ "$1" = "check_dead" -a $ping_alive = 0 -a $ps_alive = 0 ]; then + return 0 # EXIT_SUCCESS + else + if [ "$2" = "warn" ]; then + echo -e "$ps_alive processes alive and '$MYADMIN ping' resulted in\n$ping_output\n" | $ERR_LOGGER -p daemon.debug + fi + return 1 # EXIT_FAILURE + fi +} + +# +# main() +# + +case "${1:-''}" in + 'start') + sanity_checks; + # Start daemon + log_daemon_msg "Starting MariaDB database server" "mysqld" + if mysqld_status check_alive nowarn; then + log_progress_msg "already running" + log_end_msg 0 + else + # Could be removed during boot + test -e /var/run/mysqld || install -m 755 -o mysql -g root -d /var/run/mysqld + + # Start MariaDB! in a Galera setup we want to use + # new-cluster only when the galera cluster hasn't been + # bootstraped + if [ -e ${MYSQLD_DATA_DIR}/grastate.dat ]; then + # normal boot + /usr/bin/mysqld_safe "${@:2}" > /dev/null 2>&1 & + else + # bootstrap boot + log_progress_msg " (Galera bootstrap) " + /usr/bin/mysqld_safe "${@:2}" --wsrep-new-cluster > /dev/null 2>&1 & + fi + + # 6s was reported in #352070 to be too few when using ndbcluster + for i in $(seq 1 "${MYSQLD_STARTUP_TIMEOUT:-30}"); do + sleep 1 + if mysqld_status check_alive nowarn ; then break; fi + log_progress_msg "." + done + if mysqld_status check_alive warn; then + log_end_msg 0 + # Now start mysqlcheck or whatever the admin wants. + output=$(/etc/mysql/debian-start) + [ -n "$output" ] && log_action_msg "$output" + else + log_end_msg 1 + log_failure_msg "Please take a look at the syslog" + fi + fi + ;; + + 'stop') + # * As a passwordless mysqladmin (e.g. via ~/.my.cnf) must be possible + # at least for cron, we can rely on it here, too. (although we have + # to specify it explicit as e.g. sudo environments points to the normal + # users home and not /root) + log_daemon_msg "Stopping MariaDB database server" "mysqld" + if ! mysqld_status check_dead nowarn; then + set +e + shutdown_out=`$MYADMIN shutdown 2>&1`; r=$? + set -e + if [ "$r" -ne 0 ]; then + log_end_msg 1 + [ "$VERBOSE" != "no" ] && log_failure_msg "Error: $shutdown_out" + log_daemon_msg "Killing MariaDB database server by signal" "mysqld" + killall -15 mysqld + server_down= + for i in `seq 1 600`; do + sleep 1 + if mysqld_status check_dead nowarn; then server_down=1; break; fi + done + if test -z "$server_down"; then killall -9 mysqld; fi + fi + fi + + if ! mysqld_status check_dead warn; then + log_end_msg 1 + log_failure_msg "Please stop MariaDB manually and read /usr/share/doc/mariadb-server-5.5/README.Debian.gz!" + exit -1 + else + log_end_msg 0 + fi + ;; + + 'restart') + set +e; $SELF stop; set -e + $SELF start + ;; + + 'reload'|'force-reload') + log_daemon_msg "Reloading MariaDB database server" "mysqld" + $MYADMIN reload + log_end_msg 0 + ;; + + 'status') + if mysqld_status check_alive nowarn; then + log_action_msg "$($MYADMIN version)" + else + log_action_msg "MariaDB is stopped." + exit 3 + fi + ;; + + *) + echo "Usage: $SELF start|stop|restart|reload|force-reload|status" + exit 1 + ;; +esac + diff --git a/templates/database/etc_initd_mysql_RedHat b/templates/database/etc_initd_mysql_RedHat new file mode 100755 index 0000000..5efdde2 --- /dev/null +++ b/templates/database/etc_initd_mysql_RedHat @@ -0,0 +1,48 @@ +# It's not recommended to modify this file in-place, because it will be +# overwritten during package upgrades. If you want to customize, the +# best way is to create a file "/etc/systemd/system/mariadb.service", +# containing +# .include /lib/systemd/system/mariadb.service +# ...make your changes here... +# or create a file "/etc/systemd/system/mariadb.service.d/foo.conf", +# which doesn't need to include ".include" call and which will be parsed +# after the file mariadb.service itself is parsed. +# +# For more info about custom unit files, see systemd.unit(5) or +# http://fedoraproject.org/wiki/Systemd#How_do_I_customize_a_unit_file.2F_add_a_custom_unit_file.3F +# For example, if you want to increase mysql's open-files-limit to 10000, +# you need to increase systemd's LimitNOFILE setting, so create a file named +# "/etc/systemd/system/mariadb.service.d/limits.conf" containing: +# [Service] +# LimitNOFILE=10000 +# Note: /usr/lib/... is recommended in the .include line though /lib/... +# still works. +# Don't forget to reload systemd daemon after you change unit configuration: +# root> systemctl --system daemon-reload +# +# Managed by Puppet +# + +[Unit] +Description=MariaDB database server +After=syslog.target +After=network.target + +[Service] +Type=simple +User=mysql +Group=mysql +ExecStartPre=/usr/libexec/mariadb-prepare-db-dir %n +# Note: we set --basedir to prevent probes that might trigger SELinux alarms, +# per bug #547485 +ExecStart=/usr/bin/mysqld_safe --wsrep-new-cluster --basedir=/usr +ExecStartPost=/usr/libexec/mariadb-wait-ready $MAINPID + +# Give a reasonable amount of time for the server to start up/shut down +TimeoutSec=60 + +# Place temp files in a secure directory, not /tmp +PrivateTmp=true + +[Install] +WantedBy=multi-user.target diff --git a/templates/database/mysql.conf.erb b/templates/database/mysql.conf.erb new file mode 100644 index 0000000..a997a7b --- /dev/null +++ b/templates/database/mysql.conf.erb @@ -0,0 +1,69 @@ +# MANAGED BY PUPPET +# +[mysqld] +bind-address = <%= @bind_address %> +default_storage_engine = innodb +collation_server = utf8_general_ci +init_connect = 'SET NAMES utf8' +character_set_server = utf8 +max_connections = 1000 +skip_name_resolve = 1 +connect_timeout = 5 +wait_timeout = 600 +max_allowed_packet = 64M +thread_cache_size = 128 +sort_buffer_size = 4M +bulk_insert_buffer_size = 16M +tmp_table_size = 512M +max_heap_table_size = 128M +query_cache_type = 0 +myisam_recover = BACKUP +key_buffer_size = 16M +open_files_limit = 65535 +table_open_cache = 1024 +table_definition_cache = 500 +myisam_sort_buffer_size = 512M +concurrent_insert = 2 +read_buffer_size = 2M +read_rnd_buffer_size = 1M +slow_query_log = 1 +slow_query_log_file = /var/log/mysql/slow.log +log_error = /var/log/mysql/error.log +long_query_time = 1 +log_slow_verbosity = query_plan +innodb_buffer_pool_size = 512M +innodb_flush_log_at_trx_commit = 1 +innodb_lock_wait_timeout = 50 +innodb_thread_concurrency = 48 +innodb_file_per_table = 1 +innodb_open_files = 65535 +innodb_io_capacity = 1000 +innodb_file_format = Barracuda +innodb_file_format_max = Barracuda +innodb_max_dirty_pages_pct = 50 +binlog_format = ROW +innodb_autoinc_lock_mode = 2 +innodb_locks_unsafe_for_binlog = 1 +wsrep_provider = "<%= @wsrep_provider %>" +wsrep_cluster_name = "galera_cluster" +wsrep_cluster_address = "gcomm://<%= @gcomm_definition %>" +wsrep_sst_auth = root:<%= @mysql_root_password %> +wsrep_drupal_282555_workaround = 0 +wsrep_sst_method = rsync +wsrep_node_address = "<%= @bind_address %>" +wsrep_node_incoming_address = "<%= @bind_address %>" +# This is the minimal value (proc*2) +wsrep_slave_threads = "<%= @processorcount.to_i * 2 %>" + +# Thoses TWEAK assume that the galera cluster is used in master/slave mode +wsrep_provider_options = "gcache.size=<%= @galera_gcache %>;gcs.fc_master_slave=1;gcs.fc_limit=256;gcs.fc_factor=0.9" + +# this value here are used by /usr/bin/innobackupex +# and wsrep_sst_xtrabackup take only one configuration file and use the last one +# (/etc/mysql/my.cnf is not used) +datadir = /var/lib/mysql +tmpdir = /tmp/ +innodb_flush_method = O_DIRECT +innodb_log_buffer_size = 32M +innodb_log_file_size = 256M +innodb_log_files_in_group = 2 diff --git a/templates/database/mysqlchk.erb b/templates/database/mysqlchk.erb new file mode 100644 index 0000000..f9fea1d --- /dev/null +++ b/templates/database/mysqlchk.erb @@ -0,0 +1,23 @@ +# Managed by puppet +# +# default: on +# description: mysqlchk +service mysqlchk +{ +# this is a config for xinetd, place it in /etc/xinetd.d/ + disable = no + flags = REUSE + socket_type = stream + port = 9200 + wait = no + user = nobody + server = /usr/bin/clustercheck + log_on_failure += USERID + log_on_success = + #FIXME(sbadia) Security: Restrict this parameter to HAProxy pool. + only_from = 0.0.0.0/0 + bind = <%= @galera_clustercheck_ipaddress %> + # recommended to put the IPs that need + # to connect exclusively (security purposes) + per_source = UNLIMITED +} |