Age | Commit message (Collapse) | Author | Files | Lines |
|
MTU value is already written to ifcfg file if provided on the interface,
but for dpdk port, we have to apply this to ovs-vsctl command via ovs_extra.
This patch is adding the support to configure the given mtu vlaue to the
dpdk port using ovs_extra.
implements: blueprint ovs-2-6-features-dpdk
Change-Id: Ic01ed8cee2edbd648de0b64dc7f01da80c153d81
|
|
Vector Packet Processing (VPP) is a high performance packet processing
stack that runs in user space in Linux. VPP is used as an alternative to
kernel networking stack for accelerated network data path. VPP uses DPDK
poll-mode drivers to bind system interfaces rather than kernel drivers.
VPP bound interfacees are not visible to kernel networking stack and
therefore require different configuration steps in os-net-config.
VPP interface will be used in Openstack by either Neutron ML2 driver
networking-vpp as an alternative to OVS, or by Opendaylight SDN
controller with Honeycomb agent.
This patch adds interface configuration support to os-net-config.
The kernel nic specified to be VPP interface type will be bound to
VPP with a DPDK poll-mode driver. Note that os-net-config will only
configure those settings that affect interface binding, all other
configurations for VPP will be configured throught TripleO Heat
Templates.
Implements: blueprint fdio-integration-tripleo
Change-Id: Iebb40b7c5b252c51e86b6f44bcf36ed206101390
Signed-off-by: Feng Pan <fpan@redhat.com>
|
|
This change adds a flag to the base interface type, nm_controlled.
If this flag is true, the ifcfg file will contain NM_CONTROLLED=yes.
Since this flag is applied at the base it applies to any interface
type.
Note that not all interface types are supported by NetworkManager
at this time, so this option should be used with caution.
A demonstration of the usage is included in the
linux_bond_networkmanager.yaml file in the sample directory.
Change-Id: I2df6ce5b4bdb04651f27fc5daa64aa752e47f3b1
Closes-Bug: 1671888
|
|
OvS needs to be restarted after adding a DPDK port. This change
shall be removed on migration to OvS 2.7 where DPDK Hotplug support
is available.
Co-Authored-By: Saravanan KR <skramaja@redhat.com>
Closes-Bug: #1668375
Signed-off-by: karthik s <ksundara@redhat.com>
Change-Id: I250bb8e9a8e50874a82bf7f159e5a9d5677ef5ac
|
|
|
|
Network service is failing and not started when interface is binded
with dpdk driver and interface config file is available.
In such case, removing config file for the interface which is binded with
dpdk driver.
Change-Id: Id445fbfe7abdd54c2ea522960224c7f0e412dd30
Closes-Bug: #1657661
|
|
While creating DPDK bond, if-up of the bond interface
itself will activate the member interfaces. Individual
members should not be called for ifup.
Additionally, removing the option to select the primary
active-slave member for the bond, because of #1654975.
Once it is fixed, primary selection from the network
config will be added.
Change-Id: I83527ada4a3618927d55b7aa06d436686b12d5b8
Closes-Bug: #1643026.
|
|
This patch improves Python 3 compatibility by replacing .iteritems()
with .items() for iterating over dicts and fixing two tests to use
portable string comparison.
Change-Id: I8e1acafe372f1696823561d6aa8aae5437d34025
Closes-Bug: #1654187
|
|
This patch adds support for enabling hotplugging on interfaces (disabled
by default). This is useful for configuring SR-IOV root devices so that
they "return" to the system when no longer used by a VM.
Note: also updates an invalid value in the interface and ib_interface
sample files.
Partial-Bug: #1639901
Change-Id: Idfc17d6f20bb306271838895bc53f4b109dd664d
|
|
|
|
As described in https://bugs.launchpad.net/tripleo/+bug/1640598,
there are situations in which the dhclient instance started by
dhcp-all-interfaces runs even after the interface is no longer
configured for DHCP. This change will terminate the instance
using the '-r' argument if 'BOOTPROTO' is not set to 'dhcp' in
the ifcfg file for the interface. The dhclient will only be
stopped if a dhclient pid file exists, the pid file will be
removed after stopping dhclient.
Co-Authored-By: Dan Sneddon <dsneddon@redhat.com>
Change-Id: I8a52ef5fb8052f185c01dcc27a1ecd70f5d630c8
Closes-Bug: 1640598
|
|
This patch add an optional option to specify
the ETHTOOL_OPTS for each interface.
ETHTOOL_OPTS option will be written to the ifcfg file.
Change-Id: I6b594e89ba6b4c17e8df79def997f6c9ea427a3a
|
|
route_options will append additional options
to route definitions.
Change-Id: I2b70efdd9c6df7ea252576e245fbc0e9c46ea4bd
|
|
Adding options to NFVSwitch type bridge will give flexibility and
avoid specific attributes like 'cpus' in the yaml file (which will now
be moved into the options)
Change-Id: I4d715b641c54de969b9195b1a4b16195b2d7e595
|
|
- refactor test_object unit-test for IVS to follow other object class tests
- add new CLI unit test for IVS
- cleanup comments from https://review.openstack.org/#/c/345599
Change-Id: I0c337b019ae90ee7b2f207ff9b5060ed67bf182f
|
|
Add functionality to os-net-config to allow DPDK bonding of
interfaces, and implement support for parameters to be passed
by TripleO Heat Templates.
Implements: blueprint tripleo-ovs-dpdk
Depends-On: Id4a23ced28b92a642c180a35c55080e5f4e2e05d
Change-Id: If1c91402d2d393140dc1b4a678e68a1bcdbe81e4
|
|
Add support in os-net-config for DPDK ports and OVS user bridges,
and implement parameters which will be set by the TripleO Heat
Templates when using TripleO.
Implements: blueprint tripleo-ovs-dpdk
Change-Id: Id4a23ced28b92a642c180a35c55080e5f4e2e05d
|
|
|
|
The latest version of os-net-config is not reliably enabling bonding
when there are no existing bonds on the system. This is due to an
order-of-operations problem where it tries to bring up the bond
before the slave interfaces. This can result in an error because
the bonding module is not present.
This change activates the bond only after the interfaces have been
activated. This should ensure that the bonding module is loaded.
Change-Id: I62e4b10a88168948ed59170285223fb4f8d8de88
Fixes-bug: 1611471
|
|
These changes are to generate /etc/sysconf/network-scripts/ifcfg-* and
/etc/sysconfig/nfvswitch configuration files for nfvswitch and its interfaces.
NFVSwitch is a virtual switch implementation based on DPDK for datacenter
workloads with very high throughput needs.
Change-Id: If02edb9c4c54c014f67290fe0c34e2fc73cb95bd
|
|
This change adds support for Linux adapter teams using teamd to
manage the bonds instead of the kernel bonding module. Adapter
teams using teamd can act like bonds, but also support additional
features and possibly more robust fault tolerance.
This implementation is fairly straightforward, in order to maintain
backward compatibility with templates made for Linux bonds. The only
difference in the syntax between the two is type: team instead of
type: linux_bond, and the bonding_options format is different.
The configuration files for teams should contain the team options
as a JSON string. The options that can be used are documented in
the teamd.conf(5) man page.
If an interface is marked as primary, the priority will be changed
from default 0 to 100, making this interface the preferred one. In
addition, the MAC address of the Team and all member interfaces will
be set to that of the primary interface. At this time, there is no
way to set the priority of link members individually, only the
interface marked primary will have a non-default priority.
This change has been tested on bare metal and worked for a team
with two bonded interfaces using LACP. The team was part of an
OVS bridge, and there was a VLAN interface on the team. Everything
worked as expected. Unit tests are included and passing.
Change-Id: If1d516ce8f9ada76375c3a52c5557d3f7348981a
Implements: blueprint os-net-config-teaming
|
|
This patch adds support for Infiniband interfaces. The only difference
between Inifiniband and regular interfaces at this time is that an
interface with type "ib_interface" will have "TYPE=Infiniband" added
to the ifcfg file.
However, the Infiniband interface is implemented as a full new class,
so in the future we can add script functions or additional config
options to the Infiniband interface config if needed.
Unit tests for both the object and the ifcfg implementation are
included. This patch does not include an implementation for systems
that use /etc/network/interfaces (Debian-based systems).
Note that this change has not yet been tested on bare metal with
Infiniband hardware.
Fixes bug: https://bugzilla.redhat.com/show_bug.cgi?id=1326616
Change-Id: Iaeaca9cd71e2cea6147951d49aecc7458be4ca0b
|
|
OVS patch ports are used to connect two OVS bridges so traffic can flow
between them. This is generally useful for various cases.
Specifically it could be used to connect the bridges created by TripleO
networking configurations (br-ex, etc) to the bridge created by the
multinode networking setup in infra's nodepool (br_pub). This allows the
nodes in a multinode deployment to have connectivity across private
subnets where such traffic is typically firewalled off in public clouds.
Change-Id: I11404106cb3f53734f6fc9a35c22f905a0770245
|
|
Adds support for configuring OVS Tunnels via os-net-config. Tunnels are
configured as members of ovs_bridge's where the type is set to
ovs_tunnel. The object also supports setting OVS extra and options so
that additional tunnel data can be defined, such as remote_ip.
Change-Id: I31ac1cbe8a13247a1529c0f99a0aea5807888844
|
|
|
|
PEERDNS=no ensures resolv.conf is not modified by ifup/ifdown when
restarting an interface.
Closes-bug: #1567004
Change-Id: Idec15d4c1630638ce8362f9d95ae3c09bcae86a3
|
|
Bumps the version of hacking to match that in global-requirements.txt.
Change-Id: I7bb98dc773ce821b025d534f537f1a1704a50f9e
Closes-bug: #1566463
|
|
When configuring a linux bond with interfaces we have a bug
(due to a missing unit test) where the interfaces weren't
being configured with MASTER=<bond_name> SLAVE=yes. This
patch adds a unit test to check for the required configuration
and cleans up the logic in impl_ifcfg.py to handle it correctly
by simply checking for the linux_bond_name property which
is already set for us via objects.py.
See also: https://bugzilla.redhat.com/show_bug.cgi?id=1323717
Change-Id: Ic632c52265dcbbe6c0ace782e633a2030ad25e6f
Closes-bug: 1566428
|
|
The current order of operations of bringing up interfaces starts
with the bridges, and restarts the members of the bridges. This
works well when an OVS bond is part of an OVS bridge, but does not
work well when Linux bonding is used with no bridges (such as in
the case of the Nuage plugin, which creates the bridges outside of
the ifcfg files).
This change will ensure that Linux bonds are brought up first, then
any bridges are brought up, interfaces are brought up next, and the
VLAN interfacs are brought up last. This corrects a race condition
where any VLAN which was brought up before the bond would not be
active, and the VLAN would have to be brought up by hand.
This change also fixes a logging issue where os-net-config would
report that no changes were necessary when changes were made. Now,
the logging messages indicating that "No changes were necessary"
show up when no changes are required, instead of when changes are
actually made.
Change-Id: I1efee3dfd8e8cef01b054bb57a3085cc7eb60372
|
|
|
|
This change adds the ability to write IPv6 routes to the system
NIC configuration. In the ifcfg provider, IPv6 routes must be
written to network-scripts/route6-<interface> rather than
route-interface. This patch checks the next hop, and if it is an
IPv6 address (assumed because of the presence of ":"), then the
route will be written to route6-<interface>. This patch includes
tests to confirm proper operation.
Change-Id: I3563800c774a6082a896c7508f5a92e25418fe63
|
|
This change cleans up some of the Linux Bond and Linux Bridge logic
that processes member interfaces and VLANs.
One bug is fixed, where a VLAN might be assigned as a slave
interface on a bond.
Changes were made so that if VLANs are placed under a Linux Bond,
the PHYSDEV is set to the bond, so the device: does not need to
be specified in the config.
This change ensures that if a bridge has a bond and VLANs as members,
that the VLAN will be a member of the bridge and not the bond.
Change-Id: Id329737f0032e781b111741086ded83f378297a7
|
|
This change generates /etc/sysconf/network-scripts/ifcfg-* for ivs.
It also generates /etc/sysconf/ivs configuration file for ivs.
It supports only RedHat at this point.
Indigo Virtual Switch (IVS, https://github.com/floodlight/ivs)
is a virtual switch for Linux. It is compatible with the KVM
hypervisor and leveraging the Open vSwitch kernel module for
packet forwarding. There are three major differences between
IVS and OVS:
1. Each node can have at most one ivs, name is not required.
2. Bond is not allowed to attach to an ivs. It is the SDN
controller's job to dynamically form bonds on ivs.
3. IP address can only be statically assigned.
Change-Id: I276d736794d123405de793c2a4eb2c1ee55a0fad
|
|
There are times when it is desirable to set the MTU of an
"interface" to 1500 -- when the external network and the storage
network are different VLANs on the same physical interface, for
example.
Change-Id: Ic5ea6ad05118fd57c26c898a460c19969de4109d
Closes-Bug: #1539821
|
|
Add the VLAN=yes parameter if the interface name is in the foo.123 format.
This is the behavior and Debian allow the same os-net-config configuration
file to be consistent with Red Hat systems.
See also: https://bugzilla.redhat.com/show_bug.cgi?id=1283812
Change-Id: Iab2a4861e2231b34899c379963abbef59cf73328
Closes-Bug: #1518449
|
|
|
|
This patch adds support for Linux Bridges to os-net-config. This is
done completely with ifcfg files, brctl is not used directly.
Hierarchy is preserved, so a Linux Bridge may have a Linux Bond
as a member, which in turn may have multiple interfaces as members.
This changeset has been updated to include a more specific example
for Linux bridge configuration (that doesn't combine bridging and
bonding).
This change depends on the change to add support for Linux Bonds.
Change-Id: I1ddacd514b02af30139a868071d82cde19b1f946
|
|
|
|
|
|
This change adds support for Linux Bonding to the impl_ifcfg
in os-net-config. This change adds support for configuring Linux
Bonds using the Bonding module rather than Open vSwitch. Most of
the options for Linux Bonds are the same as OVS, with the exception
of bonding_options instead of ovs_options.
Change-Id: If8c6de1554234277843de9fac58536dd5b0a941b
|
|
|
|
Adds in the ability to optionally configure DNS
server settings via the ifcfg file formats.
The dns_servers JSON is an array which currently
supports either 1 or 2 DNS servers (per limitations
of the ifcfg format).
Change-Id: I9edecfdd4e1d0f39883b72be554cd92c5685881d
|
|
Currently only the first IPv4/v6 address is assigned to a NIC
even if multiple addresses are specified in config file.
With this change, ifcfg implementation can configure multiple
IPv4/v6 addresses for a NIC.
Also this enables os-net-config to configure IPv6 netmasks.
Change-Id: I31b39abae36e0620dbbcb1001fa51f5ca2bd9ea2
|
|
This patch fixes an issue in the ifcfg provider implementation
that caused interfaces to be started twice. This can
cause failures if the interface uses DHCP and dhclient
was already running.
The child_members function was incorrectly adding the interface
name to the child members set on key error. This patch removes
that logic and simply ignores key errors.
Change-Id: Ibe0e32bc09979bc68b92a722b2bfa383e77502a9
Closes-bug: #1485634
|
|
Change-Id: Ice1b8d17804cf7a0aafd308945a5e960fe927bbc
|
|
This patch adds an optional flag that can be used to
pass in args for dhclient when using DHCP.
This use case for this is to be able to control which
DHCP options dhclient listens for and we can thus
disable specific options (like routing) for some
network configurations.
Change-Id: Ic21de0615ea0ef304843c55cc5abe43cb1771169
|
|
This change sets one of the member interfaces of a bond as the primary
interface, which results in that interface being the active slave.
This change adds a step to the apply method in impl_ifcfg which runs
'ovs-appctl bond/set-active-slave <bond> <iface>' after bringing up
the bond interfaces. This step ensures that the bonds work correctly
without LACP switch support. If a member interface on the bond is set
as primary, that interface will be used.
Co-Authored-By: Dan Prince <dprince@redhat.com>
Change-Id: I795bb3b8ef977f9276bfec062b197c473393942e
|
|
|
|
Updates the ifcfg provider so that we don't set
the OVSDHCPINTERFACES config setting if
the interface is private. This doesn't seem to cause
any functional issues but it is not required
and can be confusing.
Change-Id: I9d51905df87969ae1b221680e8f0b5befc7b6bfe
|
|
When using the ifcfg provider vlans on bridges (or bonds)
fail to startup correctly. This is because VLANs on an OVS
bridge are configured as internal ports and these should not
have the VLAN=yes or PHYSDEV ifcfg settings specified.
Change-Id: Ieb743eda8f0a25cdaca43bdea767af26bf504f15
Closes-bug: #1453904
|