aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2015-08-02Allow to specify the root directory of the filesystemFrederic Lepied6-29/+47
Change-Id: Ice1b8d17804cf7a0aafd308945a5e960fe927bbc
2015-07-01Add support for dhclient_argsDan Prince4-15/+50
This patch adds an optional flag that can be used to pass in args for dhclient when using DHCP. This use case for this is to be able to control which DHCP options dhclient listens for and we can thus disable specific options (like routing) for some network configurations. Change-Id: Ic21de0615ea0ef304843c55cc5abe43cb1771169
2015-06-09Automate selection of active bond slaveDan Sneddon2-1/+18
This change selects an interface to be the active slave in a bond with active/passive characteristics. If one of the interfaces is marked as primary, it will be the active slave. If none of the interfaces are marked, the interface with the lowest alphanumeric value will be chosen. For instance em2 comes before em3. Co-Authored-By: Dan Prince <dprince@redhat.com> Change-Id: Ic9b4e8c68b788b98a19ea33a76c9210a80deabeb
2015-06-09Set primary interface on OVS bondsDan Sneddon3-1/+29
This change sets one of the member interfaces of a bond as the primary interface, which results in that interface being the active slave. This change adds a step to the apply method in impl_ifcfg which runs 'ovs-appctl bond/set-active-slave <bond> <iface>' after bringing up the bond interfaces. This step ensures that the bonds work correctly without LACP switch support. If a member interface on the bond is set as primary, that interface will be used. Co-Authored-By: Dan Prince <dprince@redhat.com> Change-Id: I795bb3b8ef977f9276bfec062b197c473393942e
2015-06-04Merge "Don't set OVSDHCPINTERFACES if bridge is static"Jenkins2-1/+25
2015-06-03Don't set OVSDHCPINTERFACES if bridge is staticDan Prince2-1/+25
Updates the ifcfg provider so that we don't set the OVSDHCPINTERFACES config setting if the interface is private. This doesn't seem to cause any functional issues but it is not required and can be confusing. Change-Id: I9d51905df87969ae1b221680e8f0b5befc7b6bfe
2015-06-03ifcfg: don't set VLAN=yes if is an ovs_portDan Prince2-5/+14
When using the ifcfg provider vlans on bridges (or bonds) fail to startup correctly. This is because VLANs on an OVS bridge are configured as internal ports and these should not have the VLAN=yes or PHYSDEV ifcfg settings specified. Change-Id: Ieb743eda8f0a25cdaca43bdea767af26bf504f15 Closes-bug: #1453904
2015-06-03Merge "-v trumps -d on the CLI"Jenkins1-3/+3
2015-05-14Add NM_CONTROLLED=no to each interface configurationDan Sneddon2-0/+8
In order to allow os-net-config to coexist with NetworkManager, this patch adds NM_CONTROLLED=no to the top of each interface configuration. This ensures that NetworkManager will not mess with interfaces that are configured by os-net-config. Change-Id: I9d226e032eb1cb411b6ea617936f4425c7fd2c74
2015-05-14Add 'eno*' interfaces to embedded_nicsDan Sneddon1-1/+2
On certain systems, the embedded NICs appear as eno1, eno2, etc. This patch adds 'eno' to 'em' and 'eth' as interface names that should be considered embedded NICs. Change-Id: Icc49596573bdbb8af25f934a647f0a2ab82adaa5
2015-05-11Add flag for DEFROUTE=no in ifcfg files to ignore DHCP gatewayDan Sneddon6-15/+79
When multiple interfaces are configured with DHCP, and more than one interface receives a gateway from the DHCP server(s), the resulting default gateway on the system is unpredictable. This change adds the "defroute" boolean to the configuration syntax for os-net-config. Any interface type may be marked so that the gateway received from the DHCP server will not be eligible as a default gateway for the system. This only works for ifcfg files, /etc/network/interfaces lacks an equivalent option. Change-Id: Id775f3506b2ec60c9a2833efd49fb8319151c00d Closes-Bug: 1449288
2015-04-30-v trumps -d on the CLIDan Prince1-3/+3
This patch updates the handling of the --debug and --verbose options so that if both are specified then log level is set to DEBUG. Change-Id: I65d5665631f5575d1c8343bb7c1b197a61e0e176 Closes-bug: #1450586
2015-03-19Mark ENI files as autogeneratedDan Prince2-6/+12
End users may not realize these files are autogenerated and may be surprised if they make changes to the /etc/sysconfig/network-scripts files which are then overwritten on reboot. Change-Id: I526c228463bd10de2cf3724aa4159b63a9aeff80
2015-03-05Enable renaming of interfaces without rebootSteven Hardy3-2/+28
When using persist_mapping to rename nics, you can either use --no-activate then reboot, or with this patch, allow activation and we'll take the device links down and rename on the fly avoiding the need for a reboot. Change-Id: Ife9486c9f5447e9c7a55f90ba075e22b6344ad67
2015-03-05Add a --no-activate option to disable device up/down actionsSteven Hardy5-21/+70
Allows you to only install the config, but not take interfaces down/up. Useful if you wish to defer activation of a new config until a later time (e.g reboot). Change-Id: I42f3195e1d3d5d3b9d1c9dbb1f7cf1364503cbd3
2015-03-04Merge "Strip trailing whitespace from yaml samples"Jenkins3-13/+13
2015-02-24Refactor ifup/ifdown into base-classSteven Hardy3-21/+19
Refactor some common code so the base-class handles the ifup/down Change-Id: Id1fee1d2d5c9315717611b7bf18f058c49fe3622
2015-02-24Refactor noop to enable logging of disabled operationsSteven Hardy3-40/+58
Currently we only output the config file contents in noop mode, but it's very useful to see what would be done in terms of taking interfaces up and down, and especially what will be removed when --cleanup mode is specified So this refactors the operations skipped by noop into the base-class so we can conveniently log what they would do when --noop is selected. Change-Id: Ia9cfa9a05b2df02c165a2ff992765ab63e55ae6b
2015-02-24Remove deprecated references to oslo-incubatorSteven Hardy17-2275/+9
Purge references to modules which have been deprecated by various oslo libraries. Requires changes to use oslo.utils and oslo.concurrency, which are added to the requirements, syncing with the latest in global requirements so we can also move to the un-namespaced oslo package names. Change-Id: Idacb71b7871330e3b3fabf4a926a5b8987614c4d
2015-02-24Move noop flag to provider base-classSteven Hardy4-16/+20
Moving this flag makes it easier to implement additional functions which work differently depending on noop mode being set, vs passing it into every function like apply() Change-Id: I796792aece3e40322523e910a3b87f7ab9a451dd
2015-02-24Add a persist_mapping option to the mapping fileSteven Hardy7-20/+81
This adds the option to permanently rewrite the configuration so the aliases are used instead of the system name. This is useful where you have a variety of hardware and you want to have consistent device naming accross all platforms - this allows you to essentially rename the interfaces permanently so they match the abstracted nicN names. Note, this needs to be run with --cleanup or the old (now conflicting) configs will still be in place, and it may require a reboot before the changes are fully applied. Change-Id: I5af146e764b72c4beaa41c549fabff0af8802152
2015-02-24Add mapping option to influence nicN mapping orderSteven Hardy6-33/+184
Currently there's a fixed mapping between abstracted interface names (nic1, nic2 etc) and the underlying biosdevname for the device. In many cases, this mapping based on system enumeration is sufficient, but in some cases, particularly when you perform detailed pre-deployment discovery of interfaces, you may wish to alter the mapping independently of the config (e.g if the config is in a heat template, and the discovery data is provided at runtime). So this adds a -m option to os-net-config, which enables a mapping file to be provided, such that specific interfaces may be mapped to their abstract names based on knowledge of the devices or the networks they are connected to. The mapping file has the following format, where em1 and em2 are device names as detected by the OS (e.g biosdevname): interface_mapping: nic1: em2 nic2: em1 Or you can use the device MAC instead: interface_mapping: nic1: 12:34:56:78:9a:bc nic2: 12:34:56:de:f0:12 Change-Id: I93e6d3ed733244834bb3c2126c91db705b4d9167
2015-01-15Strip trailing whitespace from yaml samplesSteven Hardy3-13/+13
Change-Id: Icdd35f6757d1179cb667fc2808bbd42655f7425b
2015-01-15test_cli add stderr/stdout sanity assertionsSteven Hardy1-8/+41
Currently no check for error output on stderr is made, and no sanity checked performed on the stdout string - both yaml and json versions could be empty and the test would still pass. So add sanity assertions for each case so the test is a bit more robust. Change-Id: Iced683ff3365e0766d345a2ce840b69b501fbb54
2015-01-14Derive sample location from test file, not pwdSteven Hardy1-1/+3
Currently test_cli fails if you don't run it from the repository top directory, so instead derive a relative path from the test, which e.g allows you to do nosetests -svx test_cli.py which can be more convenient when debugging. Change-Id: I120065ca17104be7c2f4bf00d3e4e281a3179703
2015-01-14Fix test_cli exit code assertionSteven Hardy1-14/+12
Currently we ignore the actual return code from the main() function, due to the try/catch, which isn't appropriate where we're directly calling the function. Instead assert the return value directly, which will catch failures where main returns a non-zero status. Change-Id: Ic92ca243230f732201f30cc63be5101f70c206bb
2015-01-14Add sample and cli test for simple interface configSteven Hardy3-0/+30
Adds a simple example showing how an individual interface can be configured, e.g outside of a bond etc. Change-Id: I05dcb4fabe718686e306bdc719b32f0fb40c1b5e
2014-12-17Merge "Fix verbose/debug loglevels"Jenkins1-2/+2
2014-12-16Merge "If setting a default route, use default netmask"Jenkins1-2/+5
2014-12-12Correct the ENI provider name log statementDan Prince1-1/+1
Change-Id: I88118836605fade6bc7978b2d65ed51cef0cdc80
2014-12-06Fix verbose/debug loglevelsSteven Hardy1-2/+2
These options seem to be reversed, in most other tools verbose means INFO and debug means DEBUG. Change-Id: I31005e4e10372018685a93dc2f80619f16c513d9
2014-12-05Workflow documentation is now in infra-manualJeremy Stanley1-4/+3
Replace URLs for workflow documentation to appropriate parts of the OpenStack Project Infrastructure Manual. Change-Id: Id21fe13d6c085966549006aa1f5b74c610b8a167
2014-11-24If setting a default route, use default netmaskJames Polley1-2/+5
Without this change, when configuring a default route, it's neccessary to explicitly provide an ip_netmask of 0.0.0.0/0 - otherwise line 177 errors because there's no route.ip_netmask. With this change, it's still possible to provide an ip_netmask for a default route (even though that makes no sense), but if none is provided The Right Thing is done. Change-Id: Idac59e571a72cc8d5693f811ec0121273b891d0f
2014-09-18Add a .gitreview file for os-net-configDan Prince1-0/+4
Change-Id: I3eedbacc359bf6209392b2e69a5a65a055d81390
2014-09-18Update child_members to use a SetDan Prince2-6/+8
Updates the impl_ifcfg.child_members method so that it uses a set instead of an array (this avoids dups). Also fixes an issue with this method which would cause tests to fail intermittently due to ordering differences. Adding each member object regardless solves this (not sure why I had commented out the children.append before) Also fixes an issue in test_cli which causes tests to fail on Debian which doesn't yet support the add_bond method on its ENI provider. This fix was to explicitly set --provider=ifcfg on the failing tests. We should be able to remove these once ENI supports bonding properly. Closes-bug: #1370615 Change-Id: Id9cfa2b2eaab27c93113956f5956facfa2a2aeee
2014-09-04Correct the setup.cfg OS.Dan Prince1-1/+1
2014-09-04Move versioning into version.pyDan Prince3-8/+21
2014-09-04Updated description in README.rstDan Prince1-3/+3
2014-09-04Minor updates to setup.cfg.Dan Prince1-9/+9
2014-08-26README.rst updates per yaml config changesDan Prince1-67/+55
2014-08-25ifcfg: restart child interfaces on updatesDan Prince2-19/+84
If a top level bridge or bond is modified we also want to restart the child interfaces.
2014-08-22Fix a few pep8 issues...Dan Prince2-4/+2
2014-08-22Add ovs_extra to some of the sample configs.Dan Prince2-0/+5
2014-08-22Don't log errors if files don't exists.Dan Prince1-1/+5
Update the utils.get_file_data method so that it doesn't log errors if a file doesn't exist.
2014-08-22Add support for ovs_extra.Dan Prince5-9/+75
Adds support for ovs_extra to the OVS Bridge and OVS bond objects.
2014-08-21A vlan on an OVS bridge doesn't require a deviceDan Prince5-15/+25
Updates the object model so that a VLAN on top of a bridge (an OVS int port) doesn't require a physical device to be set in the object model.
2014-08-21Correct the noop format for the eni providerDan Prince1-1/+1
Corrects the eni provider so that it returns the correct format in noop mode.
2014-08-20Add support for parsing YAMLDan Prince7-4/+117
Adds new YAML examples. Also adds some new CLI test cases which compare --noop stdout (from the CLI) for the json and yaml examples to verify they generate the same things.
2014-08-20Add nic1, nic2 naming abstractionDan Prince5-6/+206
Implements a new active NIC abstraction and naming convention that allows nic1, nic2, etc. to be translated to actual (active) network device names like em1, em2 (or eth0, eth1). This includes some logic to map ordered active nics to the nic1, nic2 naming scheme. Embedded nics are always listed first (in sort order) followed by any other active Nics on the system. With the new code: {"type": "interface", "name": "nic1" } is automatically translated (internally) to: {"type": "interface", "name": "em1" } This works for all top level "interface" devices, vlans, bonds, and bridges alike. For vlans the 'device' name is translated instead of the device name per vlan object conventions.
2014-08-15ifcfg: Exclude ifcfg-lo from cleanupDan Prince2-6/+20
This interface should always exist... we don't want to clean it up.