diff options
Diffstat (limited to 'site/intel-pod17/software')
7 files changed, 502 insertions, 0 deletions
diff --git a/site/intel-pod17/software/charts/kubernetes/container-networking/etcd.yaml b/site/intel-pod17/software/charts/kubernetes/container-networking/etcd.yaml new file mode 100644 index 0000000..00053a4 --- /dev/null +++ b/site/intel-pod17/software/charts/kubernetes/container-networking/etcd.yaml @@ -0,0 +1,127 @@ +--- +# The purpose of this file is to build the list of calico etcd nodes and the +# calico etcd certs for those nodes in the environment. +schema: armada/Chart/v1 +metadata: + schema: metadata/Document/v1 + name: kubernetes-calico-etcd + layeringDefinition: + abstract: false + layer: site + parentSelector: + name: kubernetes-calico-etcd-global + actions: + - method: merge + path: . + storagePolicy: cleartext + substitutions: + # Generate a list of control plane nodes (i.e. genesis node + master node + # list) on which calico etcd will run and will need certs. It is assumed + # that Airship sites will have 4 control plane nodes, so this should not need to + # change for a new site. + - src: + schema: pegleg/CommonAddresses/v1 + name: common-addresses + path: .genesis.hostname + dest: + path: .values.nodes[0].name + - src: + schema: pegleg/CommonAddresses/v1 + name: common-addresses + path: .masters[0].hostname + dest: + path: .values.nodes[1].name + - src: + schema: pegleg/CommonAddresses/v1 + name: common-addresses + path: .masters[1].hostname + dest: + path: .values.nodes[2].name + + # Certificate substitutions for the node names assembled on the above list. + # NEWSITE-CHANGEME: Per above, the number of substitutions should not need + # to change with a standard Airship deployment. However, the names of each + # deckhand certficiate should be updated with the correct hostnames for your + # environment. The ordering is important (Genesis is index 0, then master + # nodes in the order they are specified in common-addresses). + + # Genesis hostname - pod17-jump + - src: + schema: deckhand/Certificate/v1 + name: calico-etcd-pod17-jump + path: . + dest: + path: .values.nodes[0].tls.client.cert + - src: + schema: deckhand/CertificateKey/v1 + name: calico-etcd-pod17-jump + path: . + dest: + path: .values.nodes[0].tls.client.key + - src: + schema: deckhand/Certificate/v1 + name: calico-etcd-pod17-jump-peer + path: . + dest: + path: .values.nodes[0].tls.peer.cert + - src: + schema: deckhand/CertificateKey/v1 + name: calico-etcd-pod17-jump-peer + path: . + dest: + path: .values.nodes[0].tls.peer.key + + # master node 1 hostname - pod17-node1 + - src: + schema: deckhand/Certificate/v1 + name: calico-etcd-pod17-node1 + path: . + dest: + path: .values.nodes[1].tls.client.cert + - src: + schema: deckhand/CertificateKey/v1 + name: calico-etcd-pod17-node1 + path: . + dest: + path: .values.nodes[1].tls.client.key + - src: + schema: deckhand/Certificate/v1 + name: calico-etcd-pod17-node1-peer + path: . + dest: + path: .values.nodes[1].tls.peer.cert + - src: + schema: deckhand/CertificateKey/v1 + name: calico-etcd-pod17-node1-peer + path: . + dest: + path: .values.nodes[1].tls.peer.key + + # master node 2 hostname - pod17-node2 + - src: + schema: deckhand/Certificate/v1 + name: calico-etcd-pod17-node2 + path: . + dest: + path: .values.nodes[2].tls.client.cert + - src: + schema: deckhand/CertificateKey/v1 + name: calico-etcd-pod17-node2 + path: . + dest: + path: .values.nodes[2].tls.client.key + - src: + schema: deckhand/Certificate/v1 + name: calico-etcd-pod17-node2-peer + path: . + dest: + path: .values.nodes[2].tls.peer.cert + - src: + schema: deckhand/CertificateKey/v1 + name: calico-etcd-pod17-node2-peer + path: . + dest: + path: .values.nodes[2].tls.peer.key + +data: {} +... diff --git a/site/intel-pod17/software/charts/kubernetes/etcd/etcd.yaml b/site/intel-pod17/software/charts/kubernetes/etcd/etcd.yaml new file mode 100644 index 0000000..365b3d0 --- /dev/null +++ b/site/intel-pod17/software/charts/kubernetes/etcd/etcd.yaml @@ -0,0 +1,131 @@ +--- +# The purpose of this file is to build the list of k8s etcd nodes and the +# k8s etcd certs for those nodes in the environment. +schema: armada/Chart/v1 +metadata: + schema: metadata/Document/v1 + name: kubernetes-etcd + layeringDefinition: + abstract: false + layer: site + parentSelector: + name: kubernetes-etcd-global + actions: + - method: merge + path: . + storagePolicy: cleartext + substitutions: + # Generate a list of control plane nodes (i.e. genesis node + master node + # list) on which k8s etcd will run and will need certs. It is assumed + # that Airship sites will have 4 control plane nodes, so this should not need to + # change for a new site. + - src: + schema: pegleg/CommonAddresses/v1 + name: common-addresses + path: .genesis.hostname + dest: + path: .values.nodes[0].name + - src: + schema: pegleg/CommonAddresses/v1 + name: common-addresses + path: .masters[0].hostname + dest: + path: .values.nodes[1].name + - src: + schema: pegleg/CommonAddresses/v1 + name: common-addresses + path: .masters[1].hostname + dest: + path: .values.nodes[2].name + + # Certificate substitutions for the node names assembled on the above list. + # NEWSITE-CHANGEME: Per above, the number of substitutions should not need + # to change with a standard Airship deployment. However, the names of each + # deckhand certficiate should be updated with the correct hostnames for your + # environment. The ordering is important (Genesis is index 0, then master + # nodes in the order they are specified in common-addresses). + + # Genesis Exception* + # *NOTE: This is an exception in that `genesis` is not the hostname of the + # genesis node, but `genesis` is reference here in the certificate names + # because of certain Promenade assumptions that may be addressed in the + # future. Therefore `genesis` is used instead of `pod17-jump` here. + - src: + schema: deckhand/Certificate/v1 + name: kubernetes-etcd-genesis + path: . + dest: + path: .values.nodes[0].tls.client.cert + - src: + schema: deckhand/CertificateKey/v1 + name: kubernetes-etcd-genesis + path: . + dest: + path: .values.nodes[0].tls.client.key + - src: + schema: deckhand/Certificate/v1 + name: kubernetes-etcd-genesis-peer + path: . + dest: + path: .values.nodes[0].tls.peer.cert + - src: + schema: deckhand/CertificateKey/v1 + name: kubernetes-etcd-genesis-peer + path: . + dest: + path: .values.nodes[0].tls.peer.key + + # master node 1 hostname - pod17-node1 + - src: + schema: deckhand/Certificate/v1 + name: kubernetes-etcd-pod17-node1 + path: . + dest: + path: .values.nodes[1].tls.client.cert + - src: + schema: deckhand/CertificateKey/v1 + name: kubernetes-etcd-pod17-node1 + path: . + dest: + path: .values.nodes[1].tls.client.key + - src: + schema: deckhand/Certificate/v1 + name: kubernetes-etcd-pod17-node1-peer + path: . + dest: + path: .values.nodes[1].tls.peer.cert + - src: + schema: deckhand/CertificateKey/v1 + name: kubernetes-etcd-pod17-node1-peer + path: . + dest: + path: .values.nodes[1].tls.peer.key + + # master node 2 hostname - pod17-node2 + - src: + schema: deckhand/Certificate/v1 + name: kubernetes-etcd-pod17-node2 + path: . + dest: + path: .values.nodes[2].tls.client.cert + - src: + schema: deckhand/CertificateKey/v1 + name: kubernetes-etcd-pod17-node2 + path: . + dest: + path: .values.nodes[2].tls.client.key + - src: + schema: deckhand/Certificate/v1 + name: kubernetes-etcd-pod17-node2-peer + path: . + dest: + path: .values.nodes[2].tls.peer.cert + - src: + schema: deckhand/CertificateKey/v1 + name: kubernetes-etcd-pod17-node2-peer + path: $ + dest: + path: .values.nodes[2].tls.peer.key + +data: {} +... diff --git a/site/intel-pod17/software/charts/ucp/ceph/ceph-client-update.yaml b/site/intel-pod17/software/charts/ucp/ceph/ceph-client-update.yaml new file mode 100644 index 0000000..eb921b8 --- /dev/null +++ b/site/intel-pod17/software/charts/ucp/ceph/ceph-client-update.yaml @@ -0,0 +1,26 @@ +--- +# The purpose of this file is to define environment-specific parameters for ceph +# client update +schema: armada/Chart/v1 +metadata: + schema: metadata/Document/v1 + name: ucp-ceph-client-update + layeringDefinition: + abstract: false + layer: site + parentSelector: + name: ucp-ceph-client-update-global + actions: + - method: merge + path: . + storagePolicy: cleartext +data: + values: + conf: + pool: + target: + # NEWSITE-CHANGEME: Total number of OSDs. Does not need to change if + # your HW matches this site's HW. Verify for your environment. + # 8 OSDs per node x 3 nodes = 24 + osd: 3 +... diff --git a/site/intel-pod17/software/charts/ucp/ceph/ceph-client.yaml b/site/intel-pod17/software/charts/ucp/ceph/ceph-client.yaml new file mode 100644 index 0000000..e1e8ecf --- /dev/null +++ b/site/intel-pod17/software/charts/ucp/ceph/ceph-client.yaml @@ -0,0 +1,100 @@ +--- +# The purpose of this file is to define envrionment-specific parameters for the +# ceph client +schema: armada/Chart/v1 +metadata: + schema: metadata/Document/v1 + name: ucp-ceph-client + layeringDefinition: + abstract: false + layer: site + parentSelector: + name: ucp-ceph-client-global + actions: + - method: merge + path: . + storagePolicy: cleartext +data: + values: + conf: + pool: + target: + # NEWSITE-CHANGEME: The number of OSDs per ceph node. Does not need to + # change if your deployment HW matches this site's HW. + osd: 1 + spec: + # RBD pool + - name: rbd + application: rbd + replication: 1 + percent_total_data: 40 + - name: cephfs_metadata + application: cephfs + replication: 1 + percent_total_data: 5 + - name: cephfs_data + application: cephfs + replication: 1 + percent_total_data: 10 + # RadosGW pools + - name: .rgw.root + application: rgw + replication: 1 + percent_total_data: 0.1 + - name: default.rgw.control + application: rgw + replication: 1 + percent_total_data: 0.1 + - name: default.rgw.data.root + application: rgw + replication: 1 + percent_total_data: 0.1 + - name: default.rgw.gc + application: rgw + replication: 1 + percent_total_data: 0.1 + - name: default.rgw.log + application: rgw + replication: 1 + percent_total_data: 0.1 + - name: default.rgw.intent-log + application: rgw + replication: 1 + percent_total_data: 0.1 + - name: default.rgw.meta + application: rgw + replication: 1 + percent_total_data: 0.1 + - name: default.rgw.usage + application: rgw + replication: 1 + percent_total_data: 0.1 + - name: default.rgw.users.keys + application: rgw + replication: 1 + percent_total_data: 0.1 + - name: default.rgw.users.email + application: rgw + replication: 1 + percent_total_data: 0.1 + - name: default.rgw.users.swift + application: rgw + replication: 1 + percent_total_data: 0.1 + - name: default.rgw.users.uid + application: rgw + replication: 1 + percent_total_data: 0.1 + - name: default.rgw.buckets.extra + application: rgw + replication: 1 + percent_total_data: 0.1 + - name: default.rgw.buckets.index + application: rgw + replication: 1 + percent_total_data: 3 + - name: default.rgw.buckets.data + application: rgw + replication: 1 + percent_total_data: 34.8 +... diff --git a/site/intel-pod17/software/charts/ucp/ceph/ceph-osd.yaml b/site/intel-pod17/software/charts/ucp/ceph/ceph-osd.yaml new file mode 100644 index 0000000..8cf291a --- /dev/null +++ b/site/intel-pod17/software/charts/ucp/ceph/ceph-osd.yaml @@ -0,0 +1,30 @@ +--- +# The purpose of this file is to define environment-specific parameters for +# ceph-osd +schema: armada/Chart/v1 +metadata: + schema: metadata/Document/v1 + name: ucp-ceph-osd + layeringDefinition: + abstract: false + layer: site + parentSelector: + name: ucp-ceph-osd-global + actions: + - method: replace + path: .values.conf.storage.osd + - method: merge + path: . + storagePolicy: cleartext +data: + values: + conf: + storage: + osd: + - data: + type: block-logical + location: /dev/sdb + journal: + type: directory + location: /var/lib/openstack-helm/ceph/osd/osd-sdb +... diff --git a/site/intel-pod17/software/charts/ucp/divingbell/divingbell.yaml b/site/intel-pod17/software/charts/ucp/divingbell/divingbell.yaml new file mode 100644 index 0000000..db6ef66 --- /dev/null +++ b/site/intel-pod17/software/charts/ucp/divingbell/divingbell.yaml @@ -0,0 +1,72 @@ +--- +# The purpose of this file is to define site-specific parameters to the +# UAM-lite portion of the divingbell chart: +# 1. User accounts to create on bare metal +# 2. SSH public key for operationg system access to the bare metal +# 3. Passwords for operating system access via iDrac/iLo console. SSH password- +# based auth is disabled. +schema: armada/Chart/v1 +metadata: + schema: metadata/Document/v1 + name: ucp-divingbell + layeringDefinition: + abstract: false + layer: site + parentSelector: + name: ucp-divingbell-global + actions: + - method: merge + path: . + labels: + name: ucp-divingbell-site + storagePolicy: cleartext + substitutions: + - dest: + path: .values.conf.uamlite.users[0].user_sshkeys[0] + src: + schema: deckhand/PublicKey/v1 + name: airship_ssh_public_key + path: . + - dest: + path: .values.conf.uamlite.users[0].user_crypt_passwd + src: + schema: deckhand/Passphrase/v1 + name: ubuntu_crypt_password + path: . + - dest: + path: .values.conf.uamlite.users[1].user_sshkeys[0] + src: + schema: deckhand/PublicKey/v1 + name: airship_ssh_public_key + path: . + - dest: + path: .values.conf.uamlite.users[2].user_sshkeys[0] + src: + schema: deckhand/PublicKey/v1 + name: grego_ssh_public_key + path: . + - dest: + path: .values.conf.uamlite.users[3].user_sshkeys[0] + src: + schema: deckhand/PublicKey/v1 + name: kasparss_ssh_public_key + path: . + +data: + values: + conf: + uamlite: + users: + - user_name: ubuntu + user_sudo: true + user_sshkeys: [] + - user_name: airship + user_sudo: true + user_sshkeys: [] + - user_name: grego + user_sudo: true + user_sshkeys: [] + - user_name: kasparss + user_sudo: true + user_sshkeys: [] +... diff --git a/site/intel-pod17/software/config/common-software-config.yaml b/site/intel-pod17/software/config/common-software-config.yaml new file mode 100644 index 0000000..6122372 --- /dev/null +++ b/site/intel-pod17/software/config/common-software-config.yaml @@ -0,0 +1,16 @@ +--- +# The purpose of this file is to define site-specific common software config +# paramters. +schema: pegleg/CommonSoftwareConfig/v1 +metadata: + schema: metadata/Document/v1 + name: common-software-config + layeringDefinition: + abstract: false + layer: site + storagePolicy: cleartext +data: + osh: + # NEWSITE-CHANGEME: Replace with the site name + region_name: intel-pod17 +... |