diff options
Diffstat (limited to 'site/intel-pod15/baremetal/nodes.yaml')
| -rw-r--r-- | site/intel-pod15/baremetal/nodes.yaml | 193 |
1 files changed, 193 insertions, 0 deletions
diff --git a/site/intel-pod15/baremetal/nodes.yaml b/site/intel-pod15/baremetal/nodes.yaml new file mode 100644 index 0000000..75acde9 --- /dev/null +++ b/site/intel-pod15/baremetal/nodes.yaml @@ -0,0 +1,193 @@ +--- +# Drydock BaremetalNode resources for a specific rack are stored in this file. +# +# NOTE: For new sites, you should complete the networks/physical/networks.yaml +# file before working on this file. +# +# In this file, you should make the number of `drydock/BaremetalNode/v1` +# resources equal the number of bare metal nodes you have, either by deleting +# excess BaremetalNode definitions (if there are too many), or by copying and +# pasting the last BaremetalNode in the file until you have the correct number +# of baremetal nodes (if there are too few). +# +# Then in each file, address all additional NEWSITE-CHANGEME markers to update +# the data in these files with the right values for your new site. +# +# *NOTE: The Genesis node is counted as one of the control plane nodes. Note +# that the Genesis node does not appear on this bare metal list, because the +# procedure to reprovision the Genesis host with MaaS has not yet been +# implemented. Therefore there will be only two bare metal nodes in this file +# with the 'masters' tag, as the genesis roles are assigned in a different +# place (type/cntt/profiles/genesis.yaml). +# +schema: 'drydock/BaremetalNode/v1' +metadata: + schema: 'metadata/Document/v1' + # NEWSITE-CHANGEME: Replace with the hostname of the first node in the rack, + # after (excluding) genesis. + name: pod15-node2 + layeringDefinition: + abstract: false + layer: site + storagePolicy: cleartext +data: + # NEWSITE-CHANGEME: The IPv4 address assigned to each logical network on this + # node. In the reference Airship deployment, this is all logical Networks defined + # in networks/physical/networks.yaml. IP addresses are manually assigned, by-hand. + # (what could possibly go wrong!) The instructions differ for each logical + # network, which are laid out below. + addressing: + # The iDrac/iLo IP of the node. It's important that this match up with the + # node's hostname above, so that the rack number and node position encoded + # in the hostname are accurate and matching the node that IPMI operations + # will be performed against (for poweron, poweroff, PXE boot to wipe disk or + # reconfigure identity, etc - very important to get right for these reasons). + # These addresses should already be assigned to nodes racked and stacked in + # the environment; these are not addresses which MaaS assigns. + - network: oob + address: 10.10.150.12 + # The IP of the node on the DMZ network. Refer to the static IP range + # defined for the Admin network in networks/physical/networks.yaml. + - network: dmz + address: 10.10.150.22 + # The IP of the node on the Admin network. Refer to the static IP range + # defined for the Admin network in networks/physical/networks.yaml. + # This network is used for PXE bootstrapping of the bare-metal servers. + - network: admin + address: 10.10.151.22 + # The IP of the node on the Private network. Refer to the static IP range + # defined for the Private network in networks/physical/networks.yaml. + - network: private + address: 10.10.152.22 + # The IP of the node on the Storage network. Refer to the static IP range + # defined for the Storage network in networks/physical/networks.yaml. + - network: storage + address: 10.10.153.22 + # The IP of the node on the Management network. Refer to the static IP range + # defined for the Management network in networks/physical/networks.yaml. + - network: management + address: 10.10.154.22 + # NEWSITE-CHANGEME: Set the host profile for the node. + # Note that there are different host profiles depending if this is a control + # plane vs data plane node, and different profiles that map to different types + # hardware. Select the host profile that matches up to your type of + # hardware and function. E.g., the r720 here refers to Dell R720 hardware, the + # 'cp' refers to a control plane profile. Refer to profiles/host/ for the list + # of available host profiles specific to this site (otherwise, you may find + # a general set of host profiles at the "type" or "global" layers/folders. + # If you have hardware that is not on this list of profiles, you may need to + # create a new host profile for that hardware. + host_profile: cp-intel-pod15 + metadata: + tags: + # NEWSITE-CHANGEME: See previous comment. Apply 'masters' tag for control + # plane node, and 'workers' tag for data plane hosts. + - 'masters' + # NEWSITE-CHANGEME: Refer to site engineering package or other supporting + # documentation for the specific rack name. This should be a rack name that + # is meaningful to data center personnel (i.e. a rack they could locate if + # you gave them this rack designation). + rack: pod15-rack +... +--- +schema: 'drydock/BaremetalNode/v1' +metadata: + schema: 'metadata/Document/v1' + # NEWSITE-CHANGEME: The next node's hostname + name: pod15-node3 + layeringDefinition: + abstract: false + layer: site + storagePolicy: cleartext +data: + # NEWSITE-CHANGEME: The next node's IPv4 addressing + addressing: + - network: oob + address: 10.10.150.13 + - network: dmz + address: 10.10.150.23 + - network: admin + address: 10.10.151.23 + - network: private + address: 10.10.152.23 + - network: storage + address: 10.10.153.23 + - network: management + address: 10.10.154.23 + # NEWSITE-CHANGEME: The next node's host profile + host_profile: cp-intel-pod15 + metadata: + # NEWSITE-CHANGEME: The next node's rack designation + rack: pod15-rack + # NEWSITE-CHANGEME: The next node's role desigatnion + tags: + - 'masters' +... +--- +schema: 'drydock/BaremetalNode/v1' +metadata: + schema: 'metadata/Document/v1' + # NEWSITE-CHANGEME: The next node's hostname + name: pod15-node4 + layeringDefinition: + abstract: false + layer: site + storagePolicy: cleartext +data: + # NEWSITE-CHANGEME: The next node's IPv4 addressing + addressing: + - network: oob + address: 10.10.150.14 + - network: dmz + address: 10.10.150.24 + - network: admin + address: 10.10.151.24 + - network: private + address: 10.10.152.24 + - network: storage + address: 10.10.153.24 + - network: management + address: 10.10.154.24 + # NEWSITE-CHANGEME: The next node's host profile + host_profile: dp-intel-pod15 + metadata: + # NEWSITE-CHANGEME: The next node's rack designation + rack: pod15-rack + # NEWSITE-CHANGEME: The next node's role desigatnion + tags: + - 'workers' +... +--- +schema: 'drydock/BaremetalNode/v1' +metadata: + schema: 'metadata/Document/v1' + # NEWSITE-CHANGEME: The next node's hostname + name: pod15-node5 + layeringDefinition: + abstract: false + layer: site + storagePolicy: cleartext +data: + # NEWSITE-CHANGEME: The next node's IPv4 addressing + addressing: + - network: oob + address: 10.10.150.15 + - network: dmz + address: 10.10.150.25 + - network: admin + address: 10.10.151.25 + - network: private + address: 10.10.152.25 + - network: storage + address: 10.10.153.25 + - network: management + address: 10.10.154.25 + # NEWSITE-CHANGEME: The next node's host profile + host_profile: dp-intel-pod15 + metadata: + # NEWSITE-CHANGEME: The next node's rack designation + rack: pod15-rack + # NEWSITE-CHANGEME: The next node's role desigatnion + tags: + - 'workers' +... |