summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--site/intel-pod17/baremetal/nodes.yaml59
-rw-r--r--site/intel-pod17/networks/common-addresses.yaml57
-rw-r--r--site/intel-pod17/networks/physical/networks.yaml142
3 files changed, 101 insertions, 157 deletions
diff --git a/site/intel-pod17/baremetal/nodes.yaml b/site/intel-pod17/baremetal/nodes.yaml
index ee1fccd..6218abd 100644
--- a/site/intel-pod17/baremetal/nodes.yaml
+++ b/site/intel-pod17/baremetal/nodes.yaml
@@ -16,18 +16,9 @@
# *NOTE: The Genesis node is counted as one of the control plane nodes. Note
# that the Genesis node does not appear on this bare metal list, because the
# procedure to reprovision the Genesis host with MaaS has not yet been
-# implemented. Therefore there will be only three bare metal nodes in this file
-# with the 'masters' tag, as the genesis roles are assigned in a difference
-# place (profiles/genesis.yaml).
-# NOTE: The host profiles for the control plane are further divided into two
-# variants: primary and secondary. The only significance this has is that the
-# "primary" nodes are active Ceph nodes, whereas the "secondary" nodes are Ceph
-# standby nodes. For Ceph quorum, this means that the control plane split will
-# be 3 primary + 1 standby host profile, and the Genesis node counts toward one
-# of the 3 primary profiles. Other control plane services are not affected by
-# primary vs secondary designation.
-#
-# TODO: Include the hostname naming convention
+# implemented. Therefore there will be only two bare metal nodes in this file
+# with the 'masters' tag, as the genesis roles are assigned in a different
+# place (type/cntt/profiles/genesis.yaml).
#
schema: 'drydock/BaremetalNode/v1'
metadata:
@@ -55,53 +46,37 @@ data:
# the environment; these are not addresses which MaaS assigns.
- network: oob
address: 10.10.170.12
- # The IP of the node on the PXE network. Refer to the static IP range
- # defined for the PXE network in networks/physical/networks.yaml. Begin allocating
- # IPs from this network, starting with the second IP (inclusive) from the
- # allocation range of this subnet (Genesis node will have the first IP).
- # Ex: If the start IP for the PXE "static" network is 10.23.20.11, then
- # genesis will have 10.23.20.11, this node will have 10.23.20.12, and
- # so on with incrementing IP addresses with each additional node.
+ # The IP of the node on the DMZ network. Refer to the static IP range
+ # defined for the Admin network in networks/physical/networks.yaml.
- network: dmz
address: 10.10.170.22
- # Genesis node gets first IP, all other nodes increment IPs from there
- # within the allocation range defined for the network in
- # networks/physical/networks.yaml
+ # The IP of the node on the Admin network. Refer to the static IP range
+ # defined for the Admin network in networks/physical/networks.yaml.
+ # This network is used for PXE bootstrapping of the bare-metal servers.
- network: admin
address: 10.10.171.22
- # Genesis node gets first IP, all other nodes increment IPs from there
- # within the allocation range defined for the network in
- # networks/physical/networks.yaml
+ # The IP of the node on the Private network. Refer to the static IP range
+ # defined for the Private network in networks/physical/networks.yaml.
- network: private
address: 10.10.172.22
- # Genesis node gets first IP, all other nodes increment IPs from there
- # within the allocation range defined for the network in
- # networks/physical/networks.yaml
+ # The IP of the node on the Storage network. Refer to the static IP range
+ # defined for the Storage network in networks/physical/networks.yaml.
- network: storage
address: 10.10.173.22
- # Genesis node gets first IP, all other nodes increment IPs from there
- # within the allocation range defined for the network in
- # networks/physical/networks.yaml
+ # The IP of the node on the Management network. Refer to the static IP range
+ # defined for the Management network in networks/physical/networks.yaml.
- network: management
address: 10.10.174.22
# NEWSITE-CHANGEME: Set the host profile for the node.
# Note that there are different host profiles depending if this is a control
# plane vs data plane node, and different profiles that map to different types
- # hardware. Control plane host profiles are further broken down into "primary"
- # and "secondary" profiles (refer to the Notes section at the top of this doc).
- # Select the host profile that matches up to your type of
+ # hardware. Select the host profile that matches up to your type of
# hardware and function. E.g., the r720 here refers to Dell R720 hardware, the
- # 'cp' refers to a control plane profile, and the "primary" means it will be
- # an active member in the ceph quorum. Refer to profiles/host/ for the list
+ # 'cp' refers to a control plane profile. Refer to profiles/host/ for the list
# of available host profiles specific to this site (otherwise, you may find
# a general set of host profiles at the "type" or "global" layers/folders.
# If you have hardware that is not on this list of profiles, you may need to
# create a new host profile for that hardware.
- # Regarding control plane vs other data plane profiles, refer to the notes at
- # the beginning of this file. There should be one control plane node per rack,
- # including Genesis. Note Genesis won't actually be listed in this file as a
- # BaremetalNode, but the rest are.
- # This is the second "primary" control plane node after Genesis.
host_profile: cp-intel-s2600wt
metadata:
tags:
@@ -140,7 +115,6 @@ data:
- network: management
address: 10.10.174.23
# NEWSITE-CHANGEME: The next node's host profile
- # This is the third "primary" control plane profile after genesis
host_profile: cp-intel-s2600wt
metadata:
# NEWSITE-CHANGEME: The next node's rack designation
@@ -175,7 +149,6 @@ data:
- network: management
address: 10.10.174.24
# NEWSITE-CHANGEME: The next node's host profile
- # This is the one and only appearance of the "secondary" control plane profile
host_profile: dp-intel-s2600wt
metadata:
# NEWSITE-CHANGEME: The next node's rack designation
diff --git a/site/intel-pod17/networks/common-addresses.yaml b/site/intel-pod17/networks/common-addresses.yaml
index e3dfad9..758ba9b 100644
--- a/site/intel-pod17/networks/common-addresses.yaml
+++ b/site/intel-pod17/networks/common-addresses.yaml
@@ -1,6 +1,6 @@
---
# The purpose of this file is to define network related paramters that are
-# referenced elsewhere in the manifests for this site.
+# referenced (substituted) elsewhere in the manifests for this site.
#
schema: pegleg/CommonAddresses/v1
metadata:
@@ -12,20 +12,29 @@ metadata:
storagePolicy: cleartext
data:
calico:
- # NEWSITE-CHANGEME: The interface that calico will use. Update if your
- # logical bond interface name or calico VLAN have changed from the reference
+ # NEWSITE-CHANGEME: The interface that Calico will use. Update if your
+ # logical interface name or Calico VLAN have changed from the reference
# site design.
- # This should be whichever
- # bond and VLAN number specified in networks/physical/networks.yaml for the Calico
- # network. E.g. VLAN 22 for the calico network as a member of bond0, you
- # would set "interface=bond0.22" as shown here.
+ # This should be whichever interface (or bond) and VLAN number specified in
+ # networks/physical/networks.yaml for the Calico network.
+ # E.g. you would set "interface=ens785f0" as shown here.
ip_autodetection_method: interface=ens785f0
etcd:
- # etcd service IP address
+ # The etcd service IP address.
+ # This address must be within data.kubernetes.service_cidr range
service_ip: 10.96.232.136
+ # NEWSITE-CHANGEME: Update virtual IPs to be used for deployment.
+ # These IPs are imporant and tied to FQDN/DNS registration for the site, see more at
+ # https://airship-treasuremap.readthedocs.io/en/latest/authoring_and_deployment.html#register-dns-names
vip:
+ # Used for accessing Airship/OpenStack APIs (ingress of kube-system)
+ # The address is selected from DMZ network specified in
+ # networks/physical/networks.yaml
ingress_vip: '10.10.170.100/32'
+ # Used for bare-metal deployment (PXE boot, fetching Drydock bootactions)
+ # The address is selected from Admin network specified in
+ # networks/physical/networks.yaml
maas_vip: '10.10.171.100/32'
dns:
@@ -51,15 +60,16 @@ data:
# the Genesis role. Refer to the hostname naming stardards in
# networks/physical/networks.yaml
# NOTE: Ensure that the genesis node is manually configured with this
- # hostname before running `genesis.sh` on the node.
+ # hostname before running `genesis.sh` on the node, see
+ # https://airship-treasuremap.readthedocs.io/en/latest/authoring_and_deployment.html#genesis-node
hostname: pod17-node1
- # NEWSITE-CHANGEME: Calico IP of the Genesis node. Use the "start" value for
- # the calico network defined in networks/physical/networks.yaml for this IP.
+ # NEWSITE-CHANGEME: Address defined for Calico network in
+ # networks/physical/networks.yaml
ip: 10.10.172.21
bootstrap:
- # NEWSITE-CHANGEME: Update with the "start" value/IP of the static range
- # defined for the pxe network in networks/physical/networks.yaml
+ # NEWSITE-CHANGEME: Address defined for the Admin (PXE) network in
+ # networks/physical/networks.yaml
ip: 10.10.171.21
kubernetes:
@@ -81,7 +91,7 @@ data:
container_port: 2379
haproxy_port: 2378
- # NEWSITE-CHANGEME: A list of nodes (apart from Genesis) which act as the
+ # NEWSITE-CHANGEME: A list of nodes (excluding Genesis) which act as the
# control plane servers. Ensure that this matches the nodes with the 'masters'
# tags applied in baremetal/nodes.yaml
masters:
@@ -102,7 +112,6 @@ data:
node_ports:
drydock_api: 30000
maas_api: 30001
- maas_proxy: 31800 # hardcoded in MAAS
ntp:
# comma separated NTP server list. Verify that these upstream NTP servers are
@@ -110,7 +119,7 @@ data:
# values for your environment.
servers_joined: '0.ubuntu.pool.ntp.org,1.ubuntu.pool.ntp.org,2.ubuntu.pool.ntp.org,4.ubuntu.pool.ntp.org'
- # NOTE: This will be updated soon
+ # An example for Openstack Helm Infra LDAP
ldap:
# NEWSITE-CHANGEME: FQDN for LDAP. Update to the FQDN that is
# relevant for your type of deployment (test vs prod values, etc).
@@ -133,23 +142,23 @@ data:
storage:
ceph:
# NEWSITE-CHANGEME: CIDRs for Ceph. Update to match the network CIDR
- # used for the `storage` network in networks/physical/networks.yaml
+ # used for the Storage network in networks/physical/networks.yaml
public_cidr: '10.10.173.0/24'
cluster_cidr: '10.10.173.0/24'
neutron:
- # NEWSITE-CHANGEME: Overlay network for VM traffic. Ensure the bond name and
- # VLAN number are consistent with what's defined for the bond and the overlay
- # network in networks/physical/networks.yaml
+ # NEWSITE-CHANGEME: Overlay network for VM traffic. Ensure the interface name and
+ # VLAN number are consistent with what's defined for the Private network in
+ # networks/physical/networks.yaml
tunnel_device: 'ens785f0'
- # bond which the overlay is a member of. Ensure the bond name is consistent
- # with the bond assigned to the overlay network in
+ # Interface for the OpenStack external network. Ensure the interface name is
+ # consistent with the interface and VLAN assigned to the Public network in
# networks/physical/networks.yaml
external_iface: 'ens785f1.1173'
openvswitch:
- # bond which the overlay is a member of. Ensure the bond name is consistent
- # with the bond assigned to the overlay network in
+ # Interface for the OpenStack external network. Ensure the interface name is
+ # consistent with the interface and VLAN assigned to the Public network in
# networks/physical/networks.yaml
external_iface: 'ens785f1.1173'
...
diff --git a/site/intel-pod17/networks/physical/networks.yaml b/site/intel-pod17/networks/physical/networks.yaml
index d149b07..11329c3 100644
--- a/site/intel-pod17/networks/physical/networks.yaml
+++ b/site/intel-pod17/networks/physical/networks.yaml
@@ -1,8 +1,8 @@
---
# The purpose of this file is to define all of the NetworkLinks (i.e. layer 1
-# devices) and Networks (i.e. layer 3 configurations). The following is standard
-# for the logical networks in Airship:
+# devices) and Networks (i.e. layer 3 configurations).
#
+# The following is reference configuration for Intel hosted POD17
# https://wiki.opnfv.org/display/pharos/Intel+POD17
# +--------+------------+-----------------------------------+----------+----------+----------------+
# | | | | | | |
@@ -19,11 +19,6 @@
# NetworkLinks and Networks in this file. Only the IP addresses and CIDRs should
# need editing.
#
-# TODO: Given that we expect all network broadcast domains to span all racks in
-# Airship, we should choose network names that do not include the rack number.
-#
-# TODO: FQDN naming standards for hosts
-#
schema: 'drydock/NetworkLink/v1'
metadata:
schema: 'metadata/Document/v1'
@@ -33,8 +28,8 @@ metadata:
layer: site
storagePolicy: cleartext
data:
- # MaaS doesnt own this network like it does the others, so the noconfig label
- # is specified.
+ # MaaS doesnt own this network like it does the others,
+ # so the noconfig label is specified.
labels:
noconfig: enabled
bonding:
@@ -64,14 +59,6 @@ data:
- subnet: '0.0.0.0/0'
gateway: 10.10.170.1
metric: 100
- # NEWSITE-CHANGEME: Update with the site's out-of-band IP allocation range
- # FIXME: Is this IP range actually used/allocated for anything? The HW already
- # has its OOB IPs assigned. None of the Ubuntu OS's should need IPs on OOB
- # network either, as they should be routable via the default gw on OAM network
- ranges:
- - type: static
- start: 10.10.170.20
- end: 10.10.170.39
...
---
schema: 'drydock/NetworkLink/v1'
@@ -103,37 +90,24 @@ metadata:
layer: site
storagePolicy: cleartext
data:
- # NEWSITE-CHANGEME: Update with the site's PXE network CIDR
- # NOTE: The CIDR minimum size = (number of nodes * 2) + 10
+ # NEWSITE-CHANGEME: Update with the site's DMZ network CIDR
cidr: 10.10.170.0/24
routes:
- subnet: 0.0.0.0/0
- # NEWSITE-CHANGEME: Set the OAM network gateway IP address
+ # NEWSITE-CHANGEME: Set the DMZ network gateway IP address
+ # NOTE: This serves as the site's default route.
gateway: 10.10.170.1
metric: 100
- # NOTE: The first 10 IPs in the subnet are reserved for network infrastructure.
- # The remainder of the range is divided between two subnets of equal size:
- # one static, and one DHCP.
- # The DHCP addresses are used when nodes perform a PXE boot (DHCP address gets
- # assigned), and when a node is commissioning in MaaS (also uses DHCP to get
- # its IP address). However, when MaaS installs the operating system
- # ("Deploying/Deployed" states), it will write a static IP assignment to
- # /etc/network/interfaces[.d] with IPs from the "static" subnet defined here.
ranges:
- # NEWSITE-CHANGEME: Update to the first 10 IPs in the CIDR
+ # NEWSITE-CHANGEME: Exclude any reserved IPs for the lab.
- type: reserved
- start: 10.10.170.1
- end: 10.10.170.19
- # NEWSITE-CHANGEME: Update to the first half of the remaining range after
- # excluding the 10 reserved IPs.
+ start: 10.10.171.1
+ end: 10.10.171.19
+ # NEWSITE-CHANGEME: Update static range that will be used for the nodes.
+ # See minimum range required for the nodes in baremetal/nodes.yaml.
- type: static
start: 10.10.170.20
end: 10.10.170.39
- # NEWSITE-CHANGEME: Update to the second half of the remaining range after
- # excluding the 10 reserved IPs.
- - type: dhcp
- start: 10.10.170.40
- end: 10.10.170.79
dns:
# NEWSITE-CHANGEME: FQDN for bare metal nodes.
# Choose FQDN according to the node FQDN naming conventions at the top of
@@ -177,31 +151,29 @@ data:
# NEWSITE-CHANGEME: Update with the site's PXE network CIDR
# NOTE: The CIDR minimum size = (number of nodes * 2) + 10
cidr: 10.10.171.0/24
- # routes:
- # - subnet: 0.0.0.0/0
- # # NEWSITE-CHANGEME: Set the OAM network gateway IP address
- # gateway: 10.10.171.1
- # metric: 100
- # NOTE: The first 10 IPs in the subnet are reserved for network infrastructure.
- # The remainder of the range is divided between two subnets of equal size:
- # one static, and one DHCP.
- # The DHCP addresses are used when nodes perform a PXE boot (DHCP address gets
- # assigned), and when a node is commissioning in MaaS (also uses DHCP to get
- # its IP address). However, when MaaS installs the operating system
- # ("Deploying/Deployed" states), it will write a static IP assignment to
- # /etc/network/interfaces[.d] with IPs from the "static" subnet defined here.
+ routes:
+ - subnet: 0.0.0.0/0
+ # NEWSITE-CHANGEME: Set the Admin network gateway IP address
+ gateway: 10.10.171.1
+ metric: 100
+ # NOTE: The DHCP addresses are used when nodes perform a PXE boot
+ # (DHCP address gets assigned), and when a node is commissioning in MaaS
+ # (also uses DHCP to get its IP address). However, when MaaS installs the
+ # operating system ("Deploying/Deployed" states), it will write a static IP
+ # assignment to /etc/network/interfaces[.d] with IPs from the "static"
+ # subnet defined here.
ranges:
- # NEWSITE-CHANGEME: Update to the first 10 IPs in the CIDR
+ # NEWSITE-CHANGEME: Exclude any reserved IPs for the lab.
- type: reserved
start: 10.10.171.1
end: 10.10.171.19
# NEWSITE-CHANGEME: Update to the first half of the remaining range after
- # excluding the 10 reserved IPs.
+ # excluding the reserved IPs.
- type: static
start: 10.10.171.20
end: 10.10.171.39
# NEWSITE-CHANGEME: Update to the second half of the remaining range after
- # excluding the 10 reserved IPs.
+ # excluding the reserved IPs.
- type: dhcp
start: 10.10.171.40
end: 10.10.171.79
@@ -210,8 +182,10 @@ data:
# Choose FQDN according to the node FQDN naming conventions at the top of
# this document.
domain: intel-pod17.opnfv.org
- # List of upstream DNS forwards. Verify you can reach them from your
- # environment. If so, you should not need to change them.
+ # NEWSITE-CHANGEME: Use MAAS VIP as the DNS server.
+ # MAAS has inbuilt DNS server and Debian mirror that allows nodes to be
+ # deployed without requiring routed/internet access for the Admin/PXE interface.
+ # See data.vip.maas_vip in networks/common-addresses.yaml.
# TODO: This should be populated via substitution from common-addresses
servers: '10.10.171.100'
...
@@ -228,10 +202,7 @@ data:
bonding:
mode: disabled
# NEWSITE-CHANGEME: Ensure the network switches in the environment are
- # configured for this MTU or greater. Even if switches are configured for or
- # can support a slightly higher MTU, there is no need (and negliable benefit)
- # to squeeze every last byte into the MTU (e.g., 9216 vs 9100). Leave MTU at
- # 9100 for maximum compatibility.
+ # configured for this MTU or greater.
mtu: 1500
linkspeed: auto
trunking:
@@ -250,15 +221,15 @@ metadata:
layer: site
storagePolicy: cleartext
data:
- # NEWSITE-CHANGEME: Set the VLAN ID which the storage network is on
+ # NEWSITE-CHANGEME: Set the VLAN ID which the Private network is on
vlan: '0'
mtu: 1500
- # NEWSITE-CHANGEME: Set the CIDR for the storage network
+ # NEWSITE-CHANGEME: Set the CIDR for the Private network
# NOTE: The CIDR minimum size = number of nodes + 10
cidr: 10.10.172.0/24
ranges:
- # NEWSITE-CHANGEME: Update to the remaining range after excluding the 10
- # 10 reserved IPs.
+ # NEWSITE-CHANGEME: Update to the remaining range excluding (if any)
+ # reserved IPs.
- type: static
start: 10.10.172.1
end: 10.10.172.19
@@ -273,32 +244,18 @@ metadata:
layer: site
storagePolicy: cleartext
data:
- # NEWSITE-CHANGEME: Set the VLAN ID which the OAM network is on
+ # NEWSITE-CHANGEME: Set the VLAN ID which the Management network is on
vlan: '174'
mtu: 1500
- # NEWSITE-CHANGEME: Set the CIDR for the OAM network
+ # NEWSITE-CHANGEME: Set the CIDR for the Management network
# NOTE: The CIDR minimum size = number of nodes + 10
cidr: 10.10.174.0/24
- routes:
- - subnet: 0.0.0.0/0
- # NEWSITE-CHANGEME: Set the OAM network gateway IP address
- gateway: 10.10.174.1
- metric: 100
ranges:
- # NEWSITE-CHANGEME: Update to the remaining range after excluding the 10
- # 10 reserved IPs.
+ # NEWSITE-CHANGEME: Update to the remaining range excluding (if any)
+ # reserved IPs.
- type: static
start: 10.10.174.1
end: 10.23.21.19
- dns:
- # NEWSITE-CHANGEME: FQDN for bare metal nodes.
- # Choose FQDN according to the node FQDN naming conventions at the top of
- # this document.
- domain: intel-pod17.opnfv.org
- # List of upstream DNS forwards. Verify you can reach them from your
- # environment. If so, you should not need to change them.
- # TODO: This should be populated via substitution from common-addresses
- servers: '8.8.8.8,8.8.4.4'
...
---
schema: 'drydock/NetworkLink/v1'
@@ -313,10 +270,7 @@ data:
bonding:
mode: disabled
# NEWSITE-CHANGEME: Ensure the network switches in the environment are
- # configured for this MTU or greater. Even if switches are configured for or
- # can support a slightly higher MTU, there is no need (and negliable benefit)
- # to squeeze every last byte into the MTU (e.g., 9216 vs 9100). Leave MTU at
- # 9100 for maximum compatibility.
+ # configured for this MTU or greater.
mtu: 1500
linkspeed: auto
trunking:
@@ -336,20 +290,24 @@ metadata:
layer: site
storagePolicy: cleartext
data:
- # NEWSITE-CHANGEME: Set the VLAN ID which the storage network is on
+ # NEWSITE-CHANGEME: Set the VLAN ID which the Storage network is on
vlan: '0'
+ # NEWSITE-CHANGEME: Ensure the network switches in the environment are
+ # configured for this MTU or greater.
mtu: 1500
- # NEWSITE-CHANGEME: Set the CIDR for the storage network
+ # NEWSITE-CHANGEME: Set the CIDR for the Storage network
# NOTE: The CIDR minimum size = number of nodes + 10
cidr: 10.10.173.0/24
ranges:
- # NEWSITE-CHANGEME: Update to the remaining range after excluding the 10
- # 10 reserved IPs.
+ # NEWSITE-CHANGEME: Update to the remaining range excludin (if any)
+ # reserved IPs.
- type: static
start: 10.10.173.1
end: 10.10.173.19
...
---
+# The public network for OpenStack VMs.
+# NOTE: Only interface 'ens785f1.1173' will be setup, no IPs assigned to hosts
schema: 'drydock/Network/v1'
metadata:
schema: 'metadata/Document/v1'
@@ -359,7 +317,11 @@ metadata:
layer: site
storagePolicy: cleartext
data:
+ # NEWSITE-CHANGEME: Set the VLAN ID which the Public network is on
vlan: '1173'
+ # NEWSITE-CHANGEME: Ensure the network switches in the environment are
+ # configured for this MTU or greater.
mtu: 1500
+ # NEWSITE-CHANGEME: Set the CIDR for the Public network
cidr: 10.10.175.0/24
...