summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rwxr-xr-xci/03-maasdeploy.sh19
-rwxr-xr-xlabconfig/intel/pod5/deployment.yaml257
-rw-r--r--labconfig/intel/pod5/labconfig.yaml78
3 files changed, 49 insertions, 305 deletions
diff --git a/ci/03-maasdeploy.sh b/ci/03-maasdeploy.sh
index 8e8b9900..c66bf16b 100755
--- a/ci/03-maasdeploy.sh
+++ b/ci/03-maasdeploy.sh
@@ -83,7 +83,7 @@ PROFILE=ubuntu
MY_UPSTREAM_DNS=`grep "upstream_dns" deployconfig.yaml | cut -d ':' -f 2 | sed -e 's/ //'`
SSH_KEY=`cat ~/.ssh/id_rsa.pub`
MAIN_ARCHIVE=`grep "main_archive" deployconfig.yaml | cut -d ':' -f 2-3 | sed -e 's/ //'`
-URL=https://images.maas.io/ephemeral-v2/daily/
+URL=https://images.maas.io/ephemeral-v3/daily/
KEYRING_FILE=/usr/share/keyrings/ubuntu-cloudimage-keyring.gpg
SOURCE_ID=1
FABRIC_ID=1
@@ -190,7 +190,7 @@ installmaas(){
configuremaas(){
#reconfigure maas with correct MAAS address.
#Below code is needed as MAAS have issue in commisoning without restart.
- sudo ./maas-reconfigure-region.sh $MAAS_IP
+ #sudo ./maas-reconfigure-region.sh $MAAS_IP
sleep 30
sudo maas-rack config --region-url http://$MAAS_IP:5240/MAAS
@@ -218,10 +218,10 @@ configuremaas(){
maas $PROFILE spaces create name=$space || true
done
- #maas $PROFILE boot-source update $SOURCE_ID \
- # url=$URL keyring_filename=$KEYRING_FILE || true
+ maas $PROFILE boot-source update $SOURCE_ID \
+ url=$URL keyring_filename=$KEYRING_FILE || true
+
maas $PROFILE boot-resources import || true
- sleep 10
while [ "$(maas $PROFILE boot-resources is-importing)" == "true" ];
do
@@ -334,7 +334,7 @@ addnodes(){
# if we have a virshurl configuration we use it, else we use local
VIRSHURL=$(cat labconfig.json | jq -r '.opnfv.virshurl')
if ([ $VIRSHURL == "" ] || [ "$VIRSHURL" == "null" ]); then
- VIRSHURL="qemu://$USER@$MAAS_IP/system "
+ VIRSHURL="qemu+ssh://$USER@$MAAS_IP/system "
VIRSHHOST=""
else
VIRSHHOST=$(echo $VIRSHURL| cut -d\/ -f 3 | cut -d@ -f2)
@@ -384,7 +384,7 @@ addnodes(){
maas $PROFILE machines create autodetect_nodegroup='yes' name='bootstrap' \
tags='bootstrap' hostname='bootstrap' power_type='virsh' mac_addresses=$bootstrapmac \
- power_parameters_power_address='qemu+ssh://'$USER'@'$VIRSHHOST'/system' \
+ power_parameters_power_address="$VIRSHURL" \
architecture='amd64/generic' power_parameters_power_id='bootstrap'
bootstrapid=$(maas $PROFILE machines read | jq -r '.[] | select(.hostname == "bootstrap").system_id')
@@ -398,12 +398,12 @@ addnodes(){
units=$(($units - 1));
NODE_NAME=`cat labconfig.json | jq ".lab.racks[].nodes[$units].name" | cut -d \" -f 2 `
- sudo virt-install --connect qemu:///system --name $NODE_NAME --ram 8192 --cpu host --vcpus 4 \
+ sudo virt-install --connect $VIRSHURL --name $NODE_NAME --ram 8192 --cpu host --vcpus 4 \
--disk size=120,format=qcow2,bus=virtio,cache=directsync,io=native,pool=default \
$netw $netw --boot network,hd,menu=off --noautoconsole --vnc --print-xml | tee $NODE_NAME
nodemac=`grep "mac address" $NODE_NAME | head -1 | cut -d '"' -f 2`
- sudo virsh -c qemu:///system define --file $NODE_NAME
+ sudo virsh -c $VIRSHURL --file $NODE_NAME
rm -f $NODE_NAME
maas $PROFILE machines create autodetect_nodegroup='yes' name=$NODE_NAME \
tags='control compute' hostname=$NODE_NAME power_type='virsh' mac_addresses=$nodemac \
@@ -451,6 +451,7 @@ setupspacenetwork
#just make sure rack controller has been synced and import only
# just whether images have been imported or not.
+sudo ./maas-reconfigure-region.sh $MAAS_IP
sleep 120
#lets add the nodes now. Currently works only for virtual deploymnet.
diff --git a/labconfig/intel/pod5/deployment.yaml b/labconfig/intel/pod5/deployment.yaml
deleted file mode 100755
index be8a7732..00000000
--- a/labconfig/intel/pod5/deployment.yaml
+++ /dev/null
@@ -1,257 +0,0 @@
-# This file defines the deployment for the MAAS environment which is to be
-# deployed and automated.
-demo-maas:
- maas:
- # Defines the general setup for the MAAS environment, including the
- # username and password for the host as well as the MAAS server.
- user: ubuntu
- password: ubuntu
-
- # Contains the virtual machine parameters for creating the MAAS virtual
- # server. Here you can configure the name of the virsh domain, the
- # parameters for how the network is attached.
- name: opnfv-maas-intel
- interfaces: ['bridge=brAdm,model=virtio', 'bridge=brData,model=virtio', 'bridge=brPublic,model=virtio', 'bridge=brExt,model=virtio']
- memory: 4096
- vcpus: 4
- arch: amd64
- pool: default
- disk_size: 160G
- release: trusty
-
- # Apt http proxy setting(s)
- apt_http_proxy:
-
- apt_sources:
- - ppa:maas/stable
- - ppa:juju/stable
-
- boot_source:
- url: http://maas.ubuntu.com/images/ephemeral-v2/daily/
- keyring_filename: /usr/share/keyrings/ubuntu-cloudimage-keyring.gpg
- exclusive: true
- selections:
- 1:
- release: trusty
- os: ubuntu
- arches: amd64
- subarches: "*"
- labels: daily
- 2:
- release: xenial
- os: ubuntu
- arches: amd64
- subarches: "*"
- labels: daily
-
- # Virsh power settings
- # Specifies the uri and keys to use for virsh power control of the
- # juju virtual machine. If the uri is omitted, the value for the
- # --remote is used. If no power settings are desired, then do not
- # supply the virsh block.
- virsh:
- rsa_priv_key: /home/ubuntu/.ssh/id_rsa
- rsa_pub_key: /home/ubuntu/.ssh/id_rsa.pub
- uri: qemu+ssh://jenkins@10.5.1.1/system
-
- # Defines the IP Address that the configuration script will use to
- # to access the MAAS controller via SSH.
- ip_address: 10.5.1.2
-
- # This section allows the user to set a series of options on the
- # MAAS server itself. The list of config options can be found in
- # the upstream MAAS documentation:
- # - http://maas.ubuntu.com/docs/api.html#maas-server
- settings:
- main_archive: http://us.archive.ubuntu.com/ubuntu
- upstream_dns: 8.8.8.8
- maas_name: intelpod5
- # kernel_opts: "console=tty0 console=ttyS1,115200n8"
- # ntp_server: ntp.ubuntu.com
-
- # This section is used to define the networking parameters for when
- # the node first comes up. It is fed into the meta-data cloud-init
- # configuration and is used to configure the networking piece of the
- # service. The contents of this section are written directly to the
- # /etc/network/interfaces file.
- #
- # Please note, this is slightly different than the
- # node-group-interfaces section below. This will configure the
- # machine's networking params, and the node-group-interfaces will
- # configure the maas node-group interfaces which is used for
- # controlling the dhcp, dns, etc.
- network_config: |
- auto lo
- iface lo inet loopback
-
- auto eth0
- iface eth0 inet static
- address 10.5.1.2
- netmask 255.255.255.0
- network 10.5.1.0
- broadcast 10.5.1.255
- gateway 10.5.1.1
- dns-nameservers 8.8.8.8 10.5.1.2 127.0.0.1
-
- auto eth1
- iface eth1 inet static
- address 10.5.12.2
- netmask 255.255.255.0
-
- auto eth2
- iface eth2 inet static
- address 10.5.15.2
- netmask 255.255.255.0
-
- auto eth3
- iface eth3 inet static
- address 10.2.117.92
- netmask 255.255.255.0
- #auto lo
- #iface lo inet loopback
-
- #auto eth0
- #iface eth0 inet static
- # address 192.168.122.2
- # netmask 255.255.248.0
- # network 192.168.122.0
- # broadcast 192.168.122.255
- # gateway 192.168.122.1
- # dns-nameservers 192.168.122.1 127.0.0.1
-
- # The node-group-interfaces section is used to configure the MAAS
- # network interfaces. Basic configuration is supported, such as which
- # device should be bound, the range of IP addresses, etc.
- # Note: this may contain the special identifiers:
- # ${maas_net} - the first 3 octets of the ipv4 address
- # ${maas_ip} - the ip address of the MAAS controller
- node_group_ifaces:
- - device: eth0
- ip: 10.5.1.2
- subnet_mask: 255.255.255.0
- broadcast_ip: 10.5.1.255
- router_ip: 10.5.1.1
- static_range:
- low: 10.5.1.50
- high: 10.5.1.80
- dynamic_range:
- low: 10.5.1.81
- high: 10.5.1.250
- - device: eth1
- ip: 10.5.12.2
- subnet_mask: 255.255.255.0
- broadcast_ip: 10.5.12.255
- management: 1
- static_range:
- low: 10.5.12.20
- high: 10.5.12.150
- dynamic_range:
- low: 10.5.12.151
- high: 10.5.12.200
- - device: eth2
- ip: 10.5.15.2
- subnet_mask: 255.255.255.0
- broadcast_ip: 10.5.15.255
- router_ip: 10.5.15.254
- management: 1
- static_range:
- low: 10.5.15.20
- high: 10.5.15.150
- dynamic_range:
- low: 10.5.15.151
- high: 10.5.15.200
-
- # Defines the physical nodes which are added to the MAAS cluster
- # controller upon startup of the node.
- nodes:
- - name: node1-control
- tags: control
- architecture: amd64/generic
- mac_addresses:
- - "00:1e:67:cf:bb:54"
- power:
- type: ipmi
- address: 10.2.117.81
- user: root
- pass: root
- driver: LAN_2_0
-# sticky_ip_address:
-# mac_address: "38:63:bb:43:b8:9c"
-# requested_address: 192.168.122.5
-#
- - name: node2-control
- tags: control
- architecture: amd64/generic
- mac_addresses:
- - "00:1e:67:cf:b8:93"
- power:
- type: ipmi
- address: 10.2.117.82
- user: root
- pass: root
- driver: LAN_2_0
-
- - name: node3-control
- tags: control
- architecture: amd64/generic
- mac_addresses:
- - "00:1e:67:e0:08:7f"
- power:
- type: ipmi
- address: 10.2.117.83
- user: root
- pass: root
- driver: LAN_2_0
-# sticky_ip_address:
-# mac_address: "38:63:bb:43:b8:9c"
-# requested_address: 192.168.122.5
-
- - name: node4-compute
- tags: compute
- architecture: amd64/generic
- mac_addresses:
- - "00:1e:67:e0:08:b1"
- power:
- type: ipmi
- address: 10.2.117.84
- user: root
- pass: root
- driver: LAN_2_0
-# sticky_ip_address:
-# mac_address: "38:63:bb:43:b8:9c"
-# requested_address: 192.168.122.5
-
- - name: node5-compute
- tags: compute
- architecture: amd64/generic
- mac_addresses:
- - "00:1e:67:e0:0a:4b"
- power:
- type: ipmi
- address: 10.2.117.85
- user: root
- pass: root
- driver: LAN_2_0
-# sticky_ip_address:
-# mac_address: "38:63:bb:43:b8:9c"
-# requested_address: 192.168.122.5
-
-# - name: jenkins-slave
-# tags: jenkins-slave
-# architecture: amd64/generic
-# mac_addresses:
-# - "52:54:00:f0:5c:53"
-# power:
-# type: virsh
-# address: qemu+ssh://ubuntu@10.4.1.1/system
-
- # Contains the virtual machine parameters for creating the Juju bootstrap
- # node virtual machine
- juju-bootstrap:
- name: bootstrap
- interfaces: ['bridge=brAdm,model=virtio', 'bridge=brPublic,model=virtio', 'bridge=brExt,model=virtio']
- memory: 4096
- vcpus: 4
- arch: amd64
- pool: default
- disk_size: 120G
diff --git a/labconfig/intel/pod5/labconfig.yaml b/labconfig/intel/pod5/labconfig.yaml
index 8ed4532b..48ff2abb 100644
--- a/labconfig/intel/pod5/labconfig.yaml
+++ b/labconfig/intel/pod5/labconfig.yaml
@@ -7,19 +7,19 @@ lab:
architecture: x86_64
roles: [network,control]
nics:
- - ifname: enp4s0f3
+ - ifname: intf0
spaces: [admin]
mac: ["00:1E:67:CF:BB:54"]
- - ifname: ens785f0
+ - ifname: intf1
spaces: [data]
mac: ["90:E2:BA:85:4E:2C"]
- - ifname: ens785f1.504
+ - ifname: intf2.504
spaces: [public]
mac: ["90:E2:BA:85:4E:2D"]
- - ifname: ens785f0.505
+ - ifname: intf1.505
spaces: [floating]
mac: ["90:E2:BA:85:4E:2C"]
- - ifname: ens785f1
+ - ifname: intf2
spaces: [storage]
mac: ["90:E2:BA:85:4E:2D"]
power:
@@ -31,21 +31,21 @@ lab:
architecture: x86_64
roles: [compute,control,storage]
nics:
- - ifname: enp4s0f3
+ - ifname: intf0
spaces: [admin]
mac: ["00:1E:67:CF:B8:93"]
- - ifname: ens785f0
+ - ifname: intf1
spaces: [data]
mac: ["90:E2:BA:84:08:B8"]
- - ifname: ens785f1.504
+ - ifname: intf2.504
spaces: [public]
mac: ["90:E2:BA:84:08:B9"]
- - ifname: ens785f0.505
+ - ifname: intf1.505
spaces: [floating]
- mac: ["90:E2:BA:85:4E:2C"]
- - ifname: ens785f1
+ mac: ["90:E2:BA:84:08:B8"]
+ - ifname: intf2
spaces: [storage]
- mac: ["90:E2:BA:85:4E:2D"]
+ mac: ["90:E2:BA:84:08:B9"]
power:
type: ipmi
address: 10.2.117.86
@@ -55,21 +55,21 @@ lab:
architecture: x86_64
roles: [compute,control,storage]
nics:
- - ifname: enp4s0f3
+ - ifname: intf0
spaces: [admin]
mac: ["00:1E:67:E0:08:7F"]
- - ifname: ens785f0
+ - ifname: intf1
spaces: [data]
- mac: ["90:E2:BA:84:07:0D"]
- - ifname: ens785f1.504
+ mac: ["90:E2:BA:84:07:0C"]
+ - ifname: intf2.504
spaces: [public]
- mac: ["90:E2:BA:84:07:0E"]
- - ifname: ens785f0.505
+ mac: ["90:E2:BA:84:07:0D"]
+ - ifname: intf1.505
spaces: [floating]
- mac: ["90:E2:BA:85:4E:2C"]
- - ifname: ens785f1
+ mac: ["90:E2:BA:84:07:0C"]
+ - ifname: intf2
spaces: [storage]
- mac: ["90:E2:BA:85:4E:2D"]
+ mac: ["90:E2:BA:84:07:0D"]
power:
type: ipmi
address: 10.2.117.87
@@ -79,21 +79,21 @@ lab:
architecture: x86_64
roles: [compute,storage]
nics:
- - ifname: enp4s0f3
+ - ifname: intf0
spaces: [admin]
mac: ["00:1E:67:E0:08:B1"]
- - ifname: ens785f0
+ - ifname: intf1
spaces: [data]
mac: ["90:E2:BA:83:FD:80"]
- - ifname: ens785f1.504
+ - ifname: intf2.504
spaces: [public]
mac: ["90:E2:BA:83:FD:81"]
- - ifname: ens785f0.505
+ - ifname: intf1.505
spaces: [floating]
- mac: ["90:E2:BA:85:4E:2C"]
- - ifname: ens785f1
+ mac: ["90:E2:BA:83:FD:80"]
+ - ifname: intf2
spaces: [storage]
- mac: ["90:E2:BA:85:4E:2D"]
+ mac: ["90:E2:BA:83:FD:81"]
power:
type: ipmi
address: 10.2.117.88
@@ -103,21 +103,21 @@ lab:
architecture: x86_64
roles: [compute,storage]
nics:
- - ifname: enp4s0f3
+ - ifname: intf0
spaces: [admin]
mac: ["00:1E:67:E0:0A:4B"]
- - ifname: ens785f0
+ - ifname: intf1
spaces: [data]
mac: ["90:E2:BA:75:22:74"]
- - ifname: ens785f1.504
+ - ifname: intf2.504
spaces: [public]
mac: ["90:E2:BA:75:22:75"]
- - ifname: ens785f0.505
+ - ifname: intf1.505
spaces: [floating]
- mac: ["90:E2:BA:85:4E:2C"]
- - ifname: ens785f1
+ mac: ["90:E2:BA:75:22:74"]
+ - ifname: intf2
spaces: [storage]
- mac: ["90:E2:BA:85:4E:2D"]
+ mac: ["90:E2:BA:75:22:75"]
power:
type: ipmi
address: 10.2.117.89
@@ -127,13 +127,13 @@ lab:
# architecture: x86_64
# roles: [compute,storage]
# nics:
-# - ifname: enp4s0f3
+# - ifname: intf0
# spaces: [admin]
# mac: ["98:4F:EE:10:03:43"]
-# - ifname: ens785f0
+# - ifname: intf1
# spaces: [data]
# mac: ["00:1E:67:9C:3E:54"]
-# - ifname: ens785f1.504
+# - ifname: intf2.504
# spaces: [public]
# mac: ["00:1E:67:9C:3E:55"]
# power:
@@ -142,7 +142,7 @@ lab:
# user: root
# pass: root
floating-ip-range: 10.5.15.6,10.5.15.250,10.5.15.1,10.5.15.0/24
- ext-port: "ens785f0.505"
+ xt-port: "intf1.505"
dns: 8.8.8.8
osdomainname:
opnfv: