modify compass4nfv configuration documentation

JIRA: DOCS-141

Change-Id: I136ae88163d4290e5fb2485ae6b58f723237f0df
Signed-off-by: QiLiang <liangqi1@huawei.com>

7 files changed, 503 insertions, 237 deletions

diff --git a/docs/configguide/bmdeploy.rst b/docs/configguide/bmdeploy.rst
new file mode 100644
index 00000000..d8430adc
--- /dev/null
+++ b/docs/configguide/bmdeploy.rst
@@ -0,0 +1,261 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI)
+
+Installation Guide (Bare Metal Deployment)
+==========================================
+
+Nodes Configuration (Bare Metal Deployment)
+-------------------------------------------
+
+The below file is the inventory template of deployment nodes:
+
+"compass4nfv/deploy/conf/hardware_environment/huawei-pod1/[dha].yml"
+
+You can write your own IPMI IP/User/Password/Mac address/roles reference to it.
+
+        - ipmiVer -- IPMI interface version for deployment node support. IPMI 1.0
+          or IPMI 2.0 is available.
+
+        - ipmiIP -- IPMI IP address for deployment node. Make sure it can access
+          from Jumphost.
+
+        - ipmiUser -- IPMI Username for deployment node.
+
+        - ipmiPass -- IPMI Password for deployment node.
+
+        - mac -- MAC Address of deployment node PXE NIC .
+
+        - name -- Host name for deployment node after installation.
+
+        - roles -- Components deployed.
+
+
+**Assignment of different roles to servers**
+
+E.g. Openstack only deployment roles setting
+
+.. code-block:: yaml
+
+    hosts:
+      - name: host1
+        roles:
+          - controller
+          - ha
+
+      - name: host2
+        roles:
+          - compute
+
+NOTE:
+IF YOU SELECT MUTIPLE NODES AS CONTROLLER, THE 'ha' role MUST BE SELECT, TOO.
+
+E.g. Openstack and ceph deployment roles setting
+
+.. code-block:: yaml
+
+    hosts:
+      - name: host1
+        roles:
+          - controller
+          - ha
+          - ceph-adm
+          - ceph-mon
+
+      - name: host2
+        roles:
+          - compute
+          - ceph-osd
+
+E.g. Openstack and ODL deployment roles setting
+
+.. code-block:: yaml
+
+    hosts:
+      - name: host1
+        roles:
+          - controller
+          - ha
+          - odl
+
+      - name: host2
+        roles:
+          - compute
+
+E.g. Openstack and ONOS deployment roles setting
+
+.. code-block:: yaml
+
+    hosts:
+      - name: host1
+        roles:
+          - controller
+          - ha
+          - onos
+
+      - name: host2
+        roles:
+          - compute
+
+
+Network Configuration (Bare Metal Deployment)
+---------------------------------------------
+
+Before deployment, there are some network configuration to be checked based on your network topology.
+Compass4nfv network default configuration file is "compass4nfv/deploy/conf/network_cfg.yaml".
+You can write your own reference to it.
+
+**The following figure shows the default network configuration.**
+
+.. code-block:: console
+
+
+      +--+                          +--+     +--+
+      |  |                          |  |     |  |
+      |  |      +------------+      |  |     |  |
+      |  +------+  Jumphost  +------+  |     |  |
+      |  |      +------+-----+      |  |     |  |
+      |  |             |            |  |     |  |
+      |  |             +------------+  +-----+  |
+      |  |                          |  |     |  |
+      |  |      +------------+      |  |     |  |
+      |  +------+    host1   +------+  |     |  |
+      |  |      +------+-----+      |  |     |  |
+      |  |             |            |  |     |  |
+      |  |             +------------+  +-----+  |
+      |  |                          |  |     |  |
+      |  |      +------------+      |  |     |  |
+      |  +------+    host2   +------+  |     |  |
+      |  |      +------+-----+      |  |     |  |
+      |  |             |            |  |     |  |
+      |  |             +------------+  +-----+  |
+      |  |                          |  |     |  |
+      |  |      +------------+      |  |     |  |
+      |  +------+    host3   +------+  |     |  |
+      |  |      +------+-----+      |  |     |  |
+      |  |             |            |  |     |  |
+      |  |             +------------+  +-----+  |
+      |  |                          |  |     |  |
+      |  |                          |  |     |  |
+      +-++                          ++-+     +-++
+        ^                            ^         ^
+        |                            |         |
+        |                            |         |
+      +-+-------------------------+  |         |
+      |      External Network     |  |         |
+      +---------------------------+  |         |
+             +-----------------------+---+     |
+             |       IPMI Network        |     |
+             +---------------------------+     |
+                     +-------------------------+-+
+                     | PXE(Installation) Network |
+                     +---------------------------+
+
+
+Start Deployment (Bare Metal Deployment)
+----------------------------------------
+
+1. Set PXE/Installation NIC for Jumphost. (set eth1 E.g.)
+
+.. code-block:: bash
+
+    export INSTALL_NIC=eth1
+
+
+2.Set OS version and OpenStack version for deployment nodes.
+
+    Compass4nfv Colorado supports three OS version based openstack mitaka.
+
+Ubuntu 14.04 mitaka:
+
+.. code-block:: bash
+
+    export OS_VERSION=trusty
+    export OPENSTACK_VERSION=mitaka
+
+Ubuntu 16.04 mitaka:
+
+.. code-block:: bash
+
+    export OS_VERSION=xenial
+    export OPENSTACK_VERSION=mitaka_xenial
+
+Centos 7 mitaka:
+
+.. code-block:: bash
+
+    export OS_VERSION=centos7
+    export OPENSTACK_VERSION=mitaka
+
+3. Set ISO image that you want to deploy
+
+.. code-block:: bash
+
+    export ISO_URL=file:///${YOUR_OWN}/compass.iso
+    or
+    export ISO_URL=http://artifacts.opnfv.org/compass4nfv/colorado/opnfv-colorado.1.0.iso
+
+4. Run ``deploy.sh`` with inventory and network configuration
+
+.. code-block:: bash
+
+    ./deploy.sh --dha ${YOUR_OWN}/dha.yml --network ${YOUR_OWN}/network.yml
+
+E.g.
+
+1. nosdn-nofeature scenario deploy sample
+
+.. code-block:: bash
+
+    ./deploy.sh \
+        --dha ./deploy/conf/hardware_environment/huawei-pod1/os-nosdn-nofeature-ha.yml \
+        --network ./deploy/conf/hardware_environment/huawei-pod1/network.yml
+
+2. ocl-nofeature scenario deploy sample
+
+.. code-block:: bash
+
+    ./deploy.sh \
+        --dha ./deploy/conf/hardware_environment/huawei-pod1/os-ocl-nofeature-ha.yml \
+        --network ./deploy/conf/hardware_environment/huawei-pod1/network_ocl.yml
+
+3. odl_l2-moon scenario deploy sample
+
+.. code-block:: bash
+
+    ./deploy.sh \
+        --dha ./deploy/conf/hardware_environment/huawei-pod1/os-odl_l2-moon-ha.yml \
+        --network ./deploy/conf/hardware_environment/huawei-pod1/network.yml
+
+ 4. odl_l2-nofeature scenario deploy template
+
+.. code-block:: bash
+
+    ./deploy.sh \
+        --dha ./deploy/conf/hardware_environment/huawei-pod1/os-odl_l2-nofeature-ha.yml \
+        --network ./deploy/conf/hardware_environment/huawei-pod1/network.yml
+
+5. odl_l3-nofeature scenario deploy sample
+
+.. code-block:: bash
+
+    ./deploy.sh \
+        --dha ./deploy/conf/hardware_environment/huawei-pod1/os-odl_l3-nofeature-ha.yml \
+        --network ./deploy/conf/hardware_environment/huawei-pod1/network.yml
+
+6. onos-nofeature scenario deploy sample
+
+.. code-block:: bash
+
+    ./deploy.sh \
+        --dha ./deploy/conf/hardware_environment/huawei-pod1/os-onos-nofeature-ha.yml \
+        --network ./deploy/conf/hardware_environment/huawei-pod1/network_onos.yml
+
+7. onos-sfc deploy scenario sample
+
+.. code-block:: bash
+
+    ./deploy.sh \
+        --dha ./deploy/conf/hardware_environment/huawei-pod1/os-onos-sfc-ha.yml \
+        --network ./deploy/conf/hardware_environment/huawei-pod1/network_onos.yml
+
diff --git a/docs/configguide/index.rst b/docs/configguide/index.rst
index 71ea3127..fa212a03 100644
--- a/docs/configguide/index.rst
+++ b/docs/configguide/index.rst
@@ -2,7 +2,7 @@
 .. http://creativecommons.org/licenses/by/4.0
 
 ********************************************************
-OPNFV(Brahmaputra) Compass4nfv installation instructions
+OPNFV(Colorado) Compass4nfv installation instructions
 ********************************************************
 
 .. toctree::
@@ -11,6 +11,6 @@ OPNFV(Brahmaputra) Compass4nfv installation instructions
 
    introduction.rst
    installerconfig.rst
+   bmdeploy.rst
    vmdeploy.rst
    references.rst
-
diff --git a/docs/configguide/installerconfig.rst b/docs/configguide/installerconfig.rst
index 1d542eb4..21cd0825 100644
--- a/docs/configguide/installerconfig.rst
+++ b/docs/configguide/installerconfig.rst
@@ -6,43 +6,43 @@ Compass4nfv configuration
 =========================
 
 This document describes providing guidelines on how to install and
-configure the Brahmaputra release of OPNFV when using Compass as a
+configure the Colorado release of OPNFV when using Compass as a
 deployment tool including required software and hardware
 configurations.
 
 Installation and configuration of host OS, OpenStack, OpenDaylight,
-ONOS, Ceph etc. can be supported by Compass on VMs or Bare Metal
+ONOS, Ceph etc. can be supported by Compass on Virtual nodes or Bare Metal
 nodes.
 
 The audience of this document is assumed to have good knowledge in
 networking and Unix/Linux administration.
 
--------------
+
 Preconditions
 -------------
 
-Before starting the installation of the Brahmaputra release of OPNFV,
+Before starting the installation of the Colorado release of OPNFV,
 some planning must be done.
 
 
 Retrieving the installation ISO image
--------------------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 First of all, The installation ISO is needed for deploying your OPNFV
 environment, it included packages of Compass, OpenStack, OpenDaylight, ONOS
 and so on.
 
-The stable release ISO can be retrieved via `OPNFV software download page <https://www.opnfv.org/software/>`_
+The stable release ISO can be retrieved via `OPNFV software download page <https://www.opnfv.org/software>`_
 
 The daily build ISO can be retrieved via OPNFV artifacts repository:
 
 http://artifacts.opnfv.org/
 
-NOTE: Search the keyword "Compass4nfv/Brahmaputra" to locate the ISO image.
+NOTE: Search the keyword "compass4nfv/Colorado" to locate the ISO image.
 
 E.g.
-compass4nfv/brahmaputra/opnfv-2016-01-16_15-03-18.iso
-compass4nfv/brahmaputra/opnfv-2016-01-16_15-03-18.properties
+compass4nfv/colorado/opnfv-2016-01-16_15-03-18.iso
+compass4nfv/colorado/opnfv-2016-01-16_15-03-18.properties
 
 The name of iso image includes the time of iso building, you can get the daily
 ISO according the building time.
@@ -51,17 +51,17 @@ According these, the corresponding deployment scripts can be retrieved.
 
 
 Getting the deployment scripts
-------------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 To retrieve the repository of Compass4nfv on Jumphost use the following command:
 
 - git clone https://gerrit.opnfv.org/gerrit/compass4nfv
 
-To get stable/brahmaputra release, you can use the following command:
+NOTE: PLEASE DO NOT GIT CLONE COMPASS4NFV IN root DIRECTORY.
 
-- git checkout brahmaputra.1.0
+To get stable /colorado release, you can use the following command:
 
-NOTE: PLEASE DO NOT GIT CLONE COMPASS4NFV IN root DIRECTORY.
+- git checkout colorado.1.0
 
 If you don't have a Linux foundation user id, get it first by the url:
 
@@ -77,20 +77,17 @@ d5a13ce7cc2ce89946d34b0402ecf33c1d291851
 - git checkout d5a13ce7cc2ce89946d34b0402ecf33c1d291851
 
 
-Preparing the installation environment
---------------------------------------
+Setup Requirements
+------------------
 
 If you have only 1 Bare Metal server, Virtual deployment is recommended. if more
 than or equal 3 servers, the Bare Metal deployment is recommended. The minimum number of
 servers for Bare metal deployment is 3, 1 for JumpServer(Jumphost), 1 for controller,
 1 for compute.
 
-------------------
-Setup Requirements
-------------------
 
 Jumphost Requirements
----------------------
+~~~~~~~~~~~~~~~~~~~~~
 
 The Jumphost requirements are outlined below:
 
@@ -108,9 +105,10 @@ The Jumphost requirements are outlined below:
 
        -  External Network (Optional: Internet access)
 
-5.     16 GB of RAM for a Bare Metal deployment, 64 GB of RAM for a VM deployment.
+5.     16 GB of RAM for a Bare Metal deployment, 64 GB of RAM for a Virtual deployment.
+
+6.     CPU cores: 32, Memory: 64 GB, Hard Disk: 500 GB, (Virtual Deloment needs 1 TB Hard Disk)
 
-6.     Minimum 100G storage.
 
 Bare Metal Node Requirements
 ----------------------------
@@ -129,6 +127,7 @@ Bare Metal nodes require:
 
        -  External Network (OpenStack mgmt/external/storage/tenant network)
 
+
 Network Requirements
 --------------------
 
@@ -157,202 +156,15 @@ Network requirements include:
 **The networks with(*) can be share one NIC(Default configuration) or use an exclusive**
 **NIC(Reconfigurated in network.yml).**
 
+
 Execution Requirements (Bare Metal Only)
 ----------------------------------------
 
 In order to execute a deployment, one must gather the following information:
 
-1.     IPMI IP addresses for the nodes.
+1.     IPMI IP addresses of the nodes.
 
 2.     IPMI login information for the nodes (user/pass).
 
 3.     MAC address of Control Plane / Provisioning interfaces of the Bare Metal nodes.
-
-----------------------------------
-Installation Guide (BM Deployment)
-----------------------------------
-
-Nodes Configuration (BM Deployment)
------------------------------------
-
-The bellow file is the inventory template of deployment nodes:
-
-"compass4nfv/deploy/conf/hardware_environment/huawei_us_lab/pod1/dha.yml"
-
-You can write your own IPMI IP/User/Password/Mac address/roles reference to it.
-
-        - ipmiVer -- IPMI interface version for deployment node support. IPMI 1.0
-          or IPMI 2.0 is available.
-
-        - ipmiIP -- IPMI IP address for deployment node. Make sure it can access
-          from Jumphost.
-
-        - ipmiUser -- IPMI Username for deployment node.
-
-        - ipmiPass -- IPMI Password for deployment node.
-
-        - mac -- MAC Address of deployment node PXE NIC .
-
-        - name -- Host name for deployment node after installation.
-
-        - roles -- Components deployed.
-
-
-**Assignment of different roles to servers**
-
-E.g. Openstack only deployment roles setting
-
-.. code-block:: yaml
-
-    hosts:
-      - name: host1
-        roles:
-          - controller
-          - ha
-
-      - name: host2
-        roles:
-          - compute
-
-NOTE:
-IF YOU SELECT MUTIPLE NODES AS CONTROLLER, THE 'ha' role MUST BE SELECT, TOO.
-
-E.g. Openstack and ceph deployment roles setting
-
-.. code-block:: yaml
-
-    hosts:
-      - name: host1
-        roles:
-          - controller
-          - ha
-          - ceph-adm
-          - ceph-mon
-
-      - name: host2
-        roles:
-          - compute
-          - ceph-osd
-
-E.g. Openstack and ODL deployment roles setting
-
-.. code-block:: yaml
-
-    hosts:
-      - name: host1
-        roles:
-          - controller
-          - ha
-          - odl
-
-      - name: host2
-        roles:
-          - compute
-
-E.g. Openstack and ONOS deployment roles setting
-
-.. code-block:: yaml
-
-    hosts:
-      - name: host1
-        roles:
-          - controller
-          - ha
-          - onos
-
-      - name: host2
-        roles:
-          - compute
-
-
-Network Configuration (BM Deployment)
--------------------------------------
-
-Before deployment, there are some network configuration to be checked based on your network topology.
-Compass4nfv network default configuration file is "compass4nfv/deploy/conf/network_cfg.yaml".
-You can write your own reference to it.
-
-**The following figure shows the default network configuration.**
-
-.. code-block:: console
-
-
-      +--+                          +--+     +--+
-      |  |                          |  |     |  |
-      |  |      +------------+      |  |     |  |
-      |  +------+  Jumphost  +------+  |     |  |
-      |  |      +------+-----+      |  |     |  |
-      |  |             |            |  |     |  |
-      |  |             +------------+  +-----+  |
-      |  |                          |  |     |  |
-      |  |      +------------+      |  |     |  |
-      |  +------+    host1   +------+  |     |  |
-      |  |      +------+-----+      |  |     |  |
-      |  |             |            |  |     |  |
-      |  |             +------------+  +-----+  |
-      |  |                          |  |     |  |
-      |  |      +------------+      |  |     |  |
-      |  +------+    host2   +------+  |     |  |
-      |  |      +------+-----+      |  |     |  |
-      |  |             |            |  |     |  |
-      |  |             +------------+  +-----+  |
-      |  |                          |  |     |  |
-      |  |      +------------+      |  |     |  |
-      |  +------+    host3   +------+  |     |  |
-      |  |      +------+-----+      |  |     |  |
-      |  |             |            |  |     |  |
-      |  |             +------------+  +-----+  |
-      |  |                          |  |     |  |
-      |  |                          |  |     |  |
-      +-++                          ++-+     +-++
-        ^                            ^         ^
-        |                            |         |
-        |                            |         |
-      +-+-------------------------+  |         |
-      |      External Network     |  |         |
-      +---------------------------+  |         |
-             +-----------------------+---+     |
-             |       IPMI Network        |     |
-             +---------------------------+     |
-                     +-------------------------+-+
-                     | PXE(Installation) Network |
-                     +---------------------------+
-
-
-Start Deployment (BM Deployment)
---------------------------------
-
-1. Set PXE/Installation NIC for Jumphost. (set eth1 E.g.)
-
-.. code-block:: bash
-
-    export INSTALL_NIC=eth1
-
-2. Set OS version for nodes provisioning. (set Ubuntu14.04 E.g.)
-
-.. code-block:: bash
-
-    export OS_VERSION=trusty
-
-3. Set OpenStack version for deployment nodes. (set liberty E.g.)
-
-.. code-block:: bash
-
-    export OPENSTACK_VERSION=liberty
-
-4. Set ISO image that you want to deploy
-
-.. code-block:: bash
-
-    export ISO_URL=file:///${YOUR_OWN}/compass.iso
-    or
-    export ISO_URL=http://artifacts.opnfv.org/compass4nfv/brahmaputra/opnfv-release.iso
-
-5. Run ``deploy.sh`` with inventory and network configuration
-
-.. code-block:: bash
-
-    ./deploy.sh --dha ${YOUR_OWN}/dha.yml --network ${YOUR_OWN}/network.yml
-
-
-
+..
diff --git a/docs/configguide/postinstall.rst b/docs/configguide/postinstall.rst
index 050f77c3..f9b7aa92 100644
--- a/docs/configguide/postinstall.rst
+++ b/docs/configguide/postinstall.rst
@@ -20,7 +20,7 @@
 .. documentation of this.
 
 .. <Project> post configuration procedures
-.. --------------------------------------
+.. ---------------------------------------
 .. Describe any deploy tool or feature specific scripts, tests or procedures
 .. that should be carried out on the deployment post install and configuration
 .. in this section.
diff --git a/docs/configguide/vmdeploy.rst b/docs/configguide/vmdeploy.rst
index a7588845..546936d7 100644
--- a/docs/configguide/vmdeploy.rst
+++ b/docs/configguide/vmdeploy.rst
@@ -2,45 +2,238 @@
 .. http://creativecommons.org/licenses/by/4.0
 .. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI)
 
-Installation Guide (VM Deployment)
-==================================
+Installation Guide (Virtual Deployment)
+=======================================
 
-Nodes Configuration (VM Deployment)
------------------------------------
+Nodes Configuration (Virtual Deployment)
+----------------------------------------
 
-Please follow the instructions in section `Installation Guide (BM Deployment)`,
-and no need to set IPMI/PXE/MAC parameters.
+The below file is the inventory template of deployment nodes:
 
-Network Configuration (VM Deployment)
+"compass4nfv/deploy/conf/vm_environment/huawei-virtual1/network.yml"
+
+You can write your own address/roles reference to it.
+
+        - name -- Host name for deployment node after installation.
+
+        - roles -- Components deployed.
+
+
+**Assignment of different roles to servers**
+
+E.g. Openstack only deployment roles setting
+
+.. code-block:: yaml
+
+    hosts:
+      - name: host1
+        roles:
+          - controller
+          - ha
+
+      - name: host2
+        roles:
+          - compute
+
+NOTE:
+IF YOU SELECT MUTIPLE NODES AS CONTROLLER, THE 'ha' role MUST BE SELECT, TOO.
+
+E.g. Openstack and ceph deployment roles setting
+
+.. code-block:: yaml
+
+    hosts:
+      - name: host1
+        roles:
+          - controller
+          - ha
+          - ceph-adm
+          - ceph-mon
+
+      - name: host2
+        roles:
+          - compute
+          - ceph-osd
+
+E.g. Openstack and ODL deployment roles setting
+
+.. code-block:: yaml
+
+    hosts:
+      - name: host1
+        roles:
+          - controller
+          - ha
+          - odl
+
+      - name: host2
+        roles:
+          - compute
+
+E.g. Openstack and ONOS deployment roles setting
+
+.. code-block:: yaml
+
+    hosts:
+      - name: host1
+        roles:
+          - controller
+          - ha
+          - onos
+
+      - name: host2
+        roles:
+          - compute
+
+
+Network Configuration (Virtual Deployment)
+------------------------------------------
+
+Before deployment, there are some network configuration to be checked based on your network topology.
+Compass4nfv network default configuration file is "compass4nfv/deploy/conf/network_cfg.yaml".
+You can write your own reference to it.
+
+**The following figure shows the default network configuration.**
+
+.. code-block:: console
+
+
+      +--+                          +--+
+      |  |                          |  |
+      |  |      +------------+      |  |
+      |  +------+  Jumphost  +------+  |
+      |  |      +------+-----+      |  |
+      |  |             |            |  |
+      |  |             +------------+  |
+      |  |                          |  |
+      |  |      +------------+      |  |
+      |  +------+    host1   +------+  |
+      |  |      +------+-----+      |  |
+      |  |             |            |  |
+      |  |             +------------+  |
+      |  |                          |  |
+      |  |      +------------+      |  |
+      |  +------+    host2   +------+  |
+      |  |      +------+-----+      |  |
+      |  |             |            |  |
+      |  |             +------------+  |
+      |  |                          |  |
+      |  |      +------------+      |  |
+      |  +------+    host3   +------+  |
+      |  |      +------+-----+      |  |
+      |  |             |            |  |
+      |  |             +------------+  |
+      |  |                          |  |
+      |  |                          |  |
+      +-++                          ++-+
+        ^                            ^
+        |                            |
+        |                            |
+      +-+-------------------------+  |
+      |      External Network     |  |
+      +---------------------------+  |
+             +-----------------------+---+
+             | PXE(Installation) Network |
+             +---------------------------+
+
+
+Start Deployment (Virtual Deployment)
 -------------------------------------
 
-Please follow the instructions in section `Installation Guide (BM Deployment)`.
+1. Set OS version and OpenStack version for deployment nodes.
 
-Start Deployment (VM Deployment)
---------------------------------
+    Compass4nfv Colorado supports three OS version based openstack mitaka.
 
-1. Set OS version for nodes provisioning. (set Ubuntu14.04 E.g.)
+Ubuntu 14.04 mitaka:
 
 .. code-block:: bash
 
     export OS_VERSION=trusty
+    export OPENSTACK_VERSION=mitaka
+
+Ubuntu 16.04 mitaka:
+
+.. code-block:: bash
 
-3. Set OpenStack version for deployment nodes. (set liberty E.g.)
+    export OS_VERSION=xenial
+    export OPENSTACK_VERSION=mitaka_xenial
+
+Centos 7 mitaka:
 
 .. code-block:: bash
 
-    export OPENSTACK_VERSION=liberty
+    export OS_VERSION=centos7
+    export OPENSTACK_VERSION=mitaka
 
-4. Set ISO image that you want to deploy
+2. Set ISO image that you want to deploy
 
 .. code-block:: bash
 
     export ISO_URL=file:///${YOUR_OWN}/compass.iso
     or
-    export ISO_URL=http://artifacts.opnfv.org/compass4nfv/brahmaputra/opnfv-release.iso
+    export ISO_URL=http://artifacts.opnfv.org/compass4nfv/colorado/opnfv-colorado.1.0.iso
 
-5. Run ``deploy.sh`` with inventory and network configuration
+3. Run ``deploy.sh`` with inventory and network configuration
 
 .. code-block:: bash
 
     ./deploy.sh --dha ${YOUR_OWN}/dha.yml --network ${YOUR_OWN}/network.yml
+
+E.g.
+
+1. nosdn-nofeature scenario deploy sample
+
+.. code-block:: bash
+
+    ./deploy.sh \
+        --dha ./deploy/conf/vm_environment/os-nosdn-nofeature-ha.yml \
+        --network ./deploy/conf/vm_environment/huawei-virtual1/network.yml
+
+2. ocl-nofeature scenario deploy sample
+
+.. code-block:: bash
+
+    ./deploy.sh \
+        --dha ./deploy/conf/vm_environment/os-ocl-nofeature-ha.yml \
+        --network ./deploy/conf/vm_environment/huawei-virtual1/network_ocl.yml
+
+3. odl_l2-moon scenario deploy sample
+
+.. code-block:: bash
+
+    ./deploy.sh \
+        --dha ./deploy/conf/vm_environment/os-odl_l2-moon-ha.yml \
+        --network ./deploy/conf/vm_environment/huawei-virtual1/network.yml
+
+4. odl_l2-nofeature scenario deploy sample
+
+.. code-block:: bash
+
+    ./deploy.sh \
+        --dha ./deploy/conf/vm_environment/os-odl_l2-nofeature-ha.yml \
+        --network ./deploy/conf/vm_environment/huawei-virtual1/network.yml
+
+5. odl_l3-nofeature scenario deploy sample
+
+.. code-block:: bash
+
+    ./deploy.sh \
+        --dha ./deploy/conf/vm_environment/os-odl_l3-nofeature-ha.yml \
+        --network ./deploy/conf/vm_environment/huawei-virtual1/network.yml
+
+6. onos-nofeature scenario deploy sample
+
+.. code-block:: bash
+
+    ./deploy.sh \
+        --dha ./deploy/conf/vm_environment/os-onos-nofeature-ha.yml \
+        --network ./deploy/conf/vm_environment/huawei-virtual1/network_onos.yml
+
+7. onos-sfc deploy scenario sample
+
+.. code-block:: bash
+
+    ./deploy.sh \
+        --dha ./deploy/conf/vm_environment/os-onos-sfc-ha.yml \
+        --network ./deploy/conf/vm_environment/huawei-virtual1/network_onos.yml
+
diff --git a/docs/release-notes/index.rst b/docs/release-notes/index.rst
index 9afa96c2..763280a5 100644
--- a/docs/release-notes/index.rst
+++ b/docs/release-notes/index.rst
@@ -2,7 +2,7 @@
 .. http://creativecommons.org/licenses/by/4.0
 
 ============================================
-OPNFV(Brahmaputra) Compass4nfv Release Notes
+OPNFV((Colorado) Compass4nfv Release Notes
 ============================================
 
 Contents:
diff --git a/docs/release-notes/release-notes.rst b/docs/release-notes/release-notes.rst
index 5b277db0..fa8b5f0c 100644
--- a/docs/release-notes/release-notes.rst
+++ b/docs/release-notes/release-notes.rst
@@ -28,16 +28,16 @@ Release Data
 | **Project**                          | Compass4nfv                          |
 |                                      |                                      |
 +--------------------------------------+--------------------------------------+
-| **Repo/tag**                         | Compass4nfv/Brahmaputra.1.0          |
+| **Repo/tag**                         | Compass4nfv/Colorado.1.0             |
 |                                      |                                      |
 +--------------------------------------+--------------------------------------+
-| **Release designation**              | Brahmaputra.1.0                      |
+| **Release designation**              | Colorado.1.0                         |
 |                                      |                                      |
 +--------------------------------------+--------------------------------------+
 | **Release date**                     | 2016.2.25                            |
 |                                      |                                      |
 +--------------------------------------+--------------------------------------+
-| **Purpose of the delivery**          | OPNFV Brahmaputra release            |
+| **Purpose of the delivery**          | OPNFV Colorado release               |
 |                                      |                                      |
 +--------------------------------------+--------------------------------------+
 
@@ -47,16 +47,16 @@ Deliverables
 Software deliverables
 ~~~~~~~~~~~~~~~~~~~~~
 
- - Compass4nfv/Brahmaputra.1.0 ISO, please get it from `OPNFV software download page <https://www.opnfv.org/software/>`_
+ - Compass4nfv/Colorado.1.0 ISO, please get it from `OPNFV software download page <https://www.opnfv.org/software/>`_
 
 .. _document-label:
 
 Documentation deliverables
 ~~~~~~~~~~~~~~~~~~~~~~~~~~
 
- - OPNFV(Brahmaputra) Compass4nfv installation instructions
+ - OPNFV(Colorado) Compass4nfv installation instructions
 
- - OPNFV(Brahmaputra) Compass4nfv Release Notes
+ - OPNFV(Colorado) Compass4nfv Release Notes
 
 Version change
 --------------