.. This work is licensed under a Creative Commons Attribution 4.0 International .. License. .. http://creativecommons.org/licenses/by/4.0 .. (c) OPNFV, 2016-2017 Intel Corporation. Yardstick - NSB Testing -Installation ===================================== Abstract -------- The Network Service Benchmarking (NSB) extends the yardstick framework to do VNF characterization and benchmarking in three different execution environments viz., bare metal i.e. native Linux environment, standalone virtual environment and managed virtualized environment (e.g. Open stack etc.). It also brings in the capability to interact with external traffic generators both hardware & software based for triggering and validating the traffic according to user defined profiles. The steps needed to run Yardstick with NSB testing are: * Install Yardstick (NSB Testing). * Setup pod.yaml describing Test topology * Create the test configuration yaml file. * Run the test case. Prerequisites ------------- Refer chapter Yardstick Instalaltion for more information on yardstick prerequisites Several prerequisites are needed for Yardstick(VNF testing): - Python Modules: pyzmq, pika. - flex - bison - build-essential - automake - libtool - librabbitmq-dev - rabbitmq-server - collectd - intel-cmt-cat Install Yardstick (NSB Testing) ------------------------------- Refer chapter :doc:`04-installation` for more information on installing *Yardstick* After *Yardstick* is installed, executing the "nsb_setup.sh" script to setup NSB testing. :: ./nsb_setup.sh It will also automatically download all the packages needed for NSB Testing setup. System Topology: ----------------- .. code-block:: console +----------+ +----------+ | | | | | | (0)----->(0) | Ping/ | | TG1 | | vPE/ | | | | 2Trex | | | (1)<-----(1) | | +----------+ +----------+ trafficgen_1 vnf OpenStack parameters and credentials ------------------------------------ Environment variables ^^^^^^^^^^^^^^^^^^^^^ Before running Yardstick (NSB Testing) it is necessary to export traffic generator libraries. :: source ~/.bash_profile Config yardstick conf ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ :: cp ./etc/yardstick/yardstick.conf.sample /etc/yardstick/yardstick.conf vi /etc/yardstick/yardstick.conf Add trex_path and bin_path in 'nsb' section. :: [DEFAULT] debug = True dispatcher = influxdb [dispatcher_influxdb] timeout = 5 target = http://{YOUR_IP_HERE}:8086 db_name = yardstick username = root password = root [nsb] trex_path=/opt/nsb_bin/trex/scripts bin_path=/opt/nsb_bin Config pod.yaml describing Topology ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Before executing Yardstick test cases, make sure that pod.yaml reflects the topology and update all the required fields. :: cp /etc/yardstick/nodes/pod.yaml.nsb.sample /etc/yardstick/nodes/pod.yaml Config pod.yaml :: nodes: - name: trafficgen_1 role: TrafficGen ip: 1.1.1.1 user: root password: r00t interfaces: xe0: # logical name from topology.yaml and vnfd.yaml vpci: "0000:07:00.0" driver: i40e # default kernel driver dpdk_port_num: 0 local_ip: "152.16.100.20" netmask: "255.255.255.0" local_mac: "00:00:00:00:00:01" xe1: # logical name from topology.yaml and vnfd.yaml vpci: "0000:07:00.1" driver: i40e # default kernel driver dpdk_port_num: 1 local_ip: "152.16.40.20" netmask: "255.255.255.0" local_mac: "00:00.00:00:00:02" - name: vnf role: vnf ip: 1.1.1.2 user: root password: r00t host: 1.1.1.2 #BM - host == ip, virtualized env - Host - compute node interfaces: xe0: # logical name from topology.yaml and vnfd.yaml vpci: "0000:07:00.0" driver: i40e # default kernel driver dpdk_port_num: 0 local_ip: "152.16.100.19" netmask: "255.255.255.0" local_mac: "00:00:00:00:00:03" xe1: # logical name from topology.yaml and vnfd.yaml vpci: "0000:07:00.1" driver: i40e # default kernel driver dpdk_port_num: 1 local_ip: "152.16.40.19" netmask: "255.255.255.0" local_mac: "00:00:00:00:00:04" routing_table: - network: "152.16.100.20" netmask: "255.255.255.0" gateway: "152.16.100.20" if: "xe0" - network: "152.16.40.20" netmask: "255.255.255.0" gateway: "152.16.40.20" if: "xe1" nd_route_tbl: - network: "0064:ff9b:0:0:0:0:9810:6414" netmask: "112" gateway: "0064:ff9b:0:0:0:0:9810:6414" if: "xe0" - network: "0064:ff9b:0:0:0:0:9810:2814" netmask: "112" gateway: "0064:ff9b:0:0:0:0:9810:2814" if: "xe1" Enable yardstick virtual environment ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Before executing yardstick test cases, make sure to activate yardstick python virtual environment :: source /opt/nsb_bin/yardstick_venv/bin/activate Run Yardstick - Network Service Testcases ----------------------------------------- NS testing - using NSBperf CLI ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ :: source /opt/nsb_setup/yardstick_venv/bin/activate PYTHONPATH: ". ~/.bash_profile" cd /yardstick/cmd Execute command: ./NSPerf.py -h ./NSBperf.py --vnf --test eg: ./NSBperf.py --vnf vpe --test tc_baremetal_rfc2544_ipv4_1flow_64B.yaml NS testing - using yardstick CLI ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ :: source /opt/nsb_setup/yardstick_venv/bin/activate PYTHONPATH: ". ~/.bash_profile" Go to test case forlder type we want to execute. e.g. /samples/vnf_samples/nsut// run: yardstick --debug task start