.. This work is licensed under a Creative Commons Attribution 4.0 International .. License. .. http://creativecommons.org/licenses/by/4.0 .. (c) OPNFV, 2016-2019 Intel Corporation. .. Convention for heading levels in Yardstick documentation: ======= Heading 0 (reserved for the title in a document) ------- Heading 1 ^^^^^^^ Heading 2 +++++++ Heading 3 ''''''' Heading 4 Avoid deeper levels because they do not render well. ================ NSB Installation ================ .. _OVS-DPDK: http://docs.openvswitch.org/en/latest/intro/install/dpdk/ .. _devstack: https://docs.openstack.org/devstack/pike/> Abstract -------- The steps needed to run Yardstick with NSB testing are: * Install Yardstick (NSB Testing). * Setup/reference ``pod.yaml`` describing Test topology * Create/reference the test configuration yaml file. * Run the test case. Prerequisites ------------- Refer to :doc:`04-installation` for more information on Yardstick prerequisites. Several prerequisites are needed for Yardstick (VNF testing): * Python Modules: pyzmq, pika. * flex * bison * build-essential * automake * libtool * librabbitmq-dev * rabbitmq-server * collectd * intel-cmt-cat Hardware & Software Ingredients ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ SUT requirements: ======= =================== Item Description ======= =================== Memory Min 20GB NICs 2 x 10G OS Ubuntu 16.04.3 LTS kernel 4.4.0-34-generic DPDK 17.02 ======= =================== Boot and BIOS settings: ============= ================================================= Boot settings default_hugepagesz=1G hugepagesz=1G hugepages=16 hugepagesz=2M hugepages=2048 isolcpus=1-11,22-33 nohz_full=1-11,22-33 rcu_nocbs=1-11,22-33 iommu=on iommu=pt intel_iommu=on Note: nohz_full and rcu_nocbs is to disable Linux kernel interrupts BIOS CPU Power and Performance Policy CPU C-state Disabled CPU P-state Disabled Enhanced Intel® Speedstep® Tech Disabl Hyper-Threading Technology (If supported) Enabled Virtualization Techology Enabled Intel(R) VT for Direct I/O Enabled Coherency Enabled Turbo Boost Disabled ============= ================================================= Install Yardstick (NSB Testing) ------------------------------- Download the source code and check out the latest stable branch:: .. code-block:: console git clone https://gerrit.opnfv.org/gerrit/yardstick cd yardstick # Switch to latest stable branch git checkout stable/gambia Configure the network proxy, either using the environment variables or setting the global environment file. * Set environment .. code-block:: http_proxy='http://proxy.company.com:port' https_proxy='http://proxy.company.com:port' .. code-block:: console export http_proxy='http://proxy.company.com:port' export https_proxy='http://proxy.company.com:port' Modify the Yardstick installation inventory, used by Ansible:: cat ./ansible/install-inventory.ini [jumphost] localhost ansible_connection=local [yardstick-standalone] yardstick-standalone-node ansible_host=192.168.1.2 yardstick-standalone-node-2 ansible_host=192.168.1.3 # section below is only due backward compatibility. # it will be removed later [yardstick:children] jumphost [all:vars] ansible_user=root ansible_pass=root .. note:: SSH access without password needs to be configured for all your nodes defined in ``yardstick-install-inventory.ini`` file. If you want to use password authentication you need to install ``sshpass``:: sudo -EH apt-get install sshpass To execute an installation for a BareMetal or a Standalone context:: ./nsb_setup.sh To execute an installation for an OpenStack context:: ./nsb_setup.sh The above commands will set up Docker with the latest Yardstick code. To execute:: docker exec -it yardstick bash It will also automatically download all the packages needed for NSB Testing setup. Refer chapter :doc:`04-installation` for more on Docker **Install Yardstick using Docker (recommended)** Another way to execute an installation for a Bare-Metal or a Standalone context is to use ansible script ``install.yaml``. Refer chapter :doc:`04-installation` for more details. System Topology --------------- .. code-block:: console +----------+ +----------+ | | | | | | (0)----->(0) | | | TG1 | | DUT | | | | | | | (1)<-----(1) | | +----------+ +----------+ trafficgen_1 vnf Environment parameters and credentials -------------------------------------- Configure yardstick.conf ^^^^^^^^^^^^^^^^^^^^^^^^ If you did not run ``yardstick env influxdb`` inside the container to generate ``yardstick.conf``, then create the config file manually (run inside the container):: cp ./etc/yardstick/yardstick.conf.sample /etc/yardstick/yardstick.conf vi /etc/yardstick/yardstick.conf Add ``trex_path``, ``trex_client_lib`` and ``bin_path`` to the ``nsb`` section:: [DEFAULT] debug = True dispatcher = influxdb [dispatcher_influxdb] timeout = 5 target = http://{YOUR_IP_HERE}:8086 db_name = yardstick username = root password = root [nsb] trex_path=/opt/nsb_bin/trex/scripts bin_path=/opt/nsb_bin trex_client_lib=/opt/nsb_bin/trex_client/stl Run Yardstick - Network Service Testcases ----------------------------------------- NS testing - using yardstick CLI ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ See :doc:`04-installation` Connect to the Yardstick container:: docker exec -it yardstick /bin/bash If you're running ``heat`` testcases and ``nsb_setup.sh`` was not used:: source /etc/yardstick/openstack.creds In addition to the above, you need to se the ``EXTERNAL_NETWORK`` for OpenStack:: export EXTERNAL_NETWORK="" Finally, you should be able to run the testcase:: yardstick --debug task start ./yardstick/samples/vnf_samples/nsut// Network Service Benchmarking - Bare-Metal ----------------------------------------- Bare-Metal Config pod.yaml describing Topology ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Bare-Metal 2-Node setup +++++++++++++++++++++++ .. code-block:: console +----------+ +----------+ | | | | | | (0)----->(0) | | | TG1 | | DUT | | | | | | | (n)<-----(n) | | +----------+ +----------+ trafficgen_1 vnf Bare-Metal 3-Node setup - Correlated Traffic ++++++++++++++++++++++++++++++++++++++++++++ .. code-block:: console +----------+ +----------+ +------------+ | | | | | | | | | | | | | | (0)----->(0) | | | UDP | | TG1 | | DUT | | Replay | | | | | | | | | | |(1)<---->(0)| | +----------+ +----------+ +------------+ trafficgen_1 vnf trafficgen_2 Bare-Metal Config pod.yaml ^^^^^^^^^^^^^^^^^^^^^^^^^^ Before executing Yardstick test cases, make sure that ``pod.yaml`` reflects the topology and update all the required fields.:: cp ./etc/yardstick/nodes/pod.yaml.nsb.sample /etc/yardstick/nodes/pod.yaml .. code-block:: YAML nodes: - name: trafficgen_1 role: TrafficGen ip: 1.1.1.1 user: root password: r00t interfaces: xe0: # logical name from topology.yaml and vnfd.yaml vpci: "0000:07:00.0" driver: i40e # default kernel driver dpdk_port_num: 0 local_ip: "152.16.100.20" netmask: "255.255.255.0" local_mac: "00:00:00:00:00:01" xe1: # logical name from topology.yaml and vnfd.yaml vpci: "0000:07:00.1" driver: i40e # default kernel driver dpdk_port_num: 1 local_ip: "152.16.40.20" netmask: "255.255.255.0" local_mac: "00:00.00:00:00:02" - name: vnf role: vnf ip: 1.1.1.2 user: root password: r00t host: 1.1.1.2 #BM - host == ip, virtualized env - Host - compute node interfaces: xe0: # logical name from topology.yaml and vnfd.yaml vpci: "0000:07:00.0" driver: i40e # default kernel driver dpdk_port_num: 0 local_ip: "152.16.100.19" netmask: "255.255.255.0" local_mac: "00:00:00:00:00:03" xe1: # logical name from topology.yaml and vnfd.yaml vpci: "0000:07:00.1" driver: i40e # default kernel driver dpdk_port_num: 1 local_ip: "152.16.40.19" netmask: "255.255.255.0" local_mac: "00:00:00:00:00:04" routing_table: - network: "152.16.100.20" netmask: "255.255.255.0" gateway: "152.16.100.20" if: "xe0" - network: "152.16.40.20" netmask: "255.255.255.0" gateway: "152.16.40.20" if: "xe1" nd_route_tbl: - network: "0064:ff9b:0:0:0:0:9810:6414" netmask: "112" gateway: "0064:ff9b:0:0:0:0:9810:6414" if: "xe0" - network: "0064:ff9b:0:0:0:0:9810:2814" netmask: "112" gateway: "0064:ff9b:0:0:0:0:9810:2814" if: "xe1" Standalone Virtualization ------------------------- SR-IOV ^^^^^^ SR-IOV Pre-requisites +++++++++++++++++++++ On Host, where VM is created: a) Create and configure a bridge named ``br-int`` for VM to connect to external network. Currently this can be done using VXLAN tunnel. Execute the following on host, where VM is created:: ip link add type vxlan remote local id dstport 4789 brctl addbr br-int brctl addif br-int vxlan0 ip link set dev vxlan0 up ip addr add dev br-int ip link set dev br-int up .. note:: You may need to add extra rules to iptable to forward traffic. .. code-block:: console iptables -A FORWARD -i br-int -s / -j ACCEPT iptables -A FORWARD -o br-int -d / -j ACCEPT Execute the following on a jump host: .. code-block:: console ip link add type vxlan remote local id dstport 4789 ip addr add dev vxlan0 ip link set dev vxlan0 up .. note:: Host and jump host are different baremetal servers. b) Modify test case management CIDR. IP addresses IP#1, IP#2 and CIDR must be in the same network. .. code-block:: YAML servers: vnf: network_ports: mgmt: cidr: '1.1.1.7/24' c) Build guest image for VNF to run. Most of the sample test cases in Yardstick are using a guest image called ``yardstick-nsb-image`` which deviates from an Ubuntu Cloud Server image Yardstick has a tool for building this custom image with SampleVNF. It is necessary to have ``sudo`` rights to use this tool. Also you may need to install several additional packages to use this tool, by following the commands below:: sudo apt-get update && sudo apt-get install -y qemu-utils kpartx This image can be built using the following command in the directory where Yardstick is installed:: export YARD_IMG_ARCH='amd64' sudo echo "Defaults env_keep += \'YARD_IMG_ARCH\'" >> /etc/sudoers For instructions on generating a cloud image using Ansible, refer to :doc:`04-installation`. for more details refer to chapter :doc:`04-installation` .. note:: VM should be build with static IP and be accessible from the Yardstick host. SR-IOV Config pod.yaml describing Topology ++++++++++++++++++++++++++++++++++++++++++ SR-IOV 2-Node setup +++++++++++++++++++ .. code-block:: console +--------------------+ | | | | | DUT | | (VNF) | | | +--------------------+ | VF NIC | | VF NIC | +--------+ +--------+ ^ ^ | | | | +----------+ +-------------------------+ | | | ^ ^ | | | | | | | | | (0)<----->(0) | ------ SUT | | | TG1 | | | | | | (n)<----->(n) | ----------------- | | | | | +----------+ +-------------------------+ trafficgen_1 host SR-IOV 3-Node setup - Correlated Traffic ++++++++++++++++++++++++++++++++++++++++ .. code-block:: console +--------------------+ | | | | | DUT | | (VNF) | | | +--------------------+ | VF NIC | | VF NIC | +--------+ +--------+ ^ ^ | | | | +----------+ +---------------------+ +--------------+ | | | ^ ^ | | | | | | | | | | | | | (0)<----->(0) |----- | | | TG2 | | TG1 | | SUT | | | (UDP Replay) | | | | | | | | | | (n)<----->(n) | -----| (n)<-->(n) | | +----------+ +---------------------+ +--------------+ trafficgen_1 host trafficgen_2 Before executing Yardstick test cases, make sure that ``pod.yaml`` reflects the topology and update all the required fields. .. code-block:: console cp ./etc/yardstick/nodes/standalone/trex_bm.yaml.sample /etc/yardstick/nodes/standalone/pod_trex.yaml cp ./etc/yardstick/nodes/standalone/host_sriov.yaml /etc/yardstick/nodes/standalone/host_sriov.yaml .. note:: Update all the required fields like ip, user, password, pcis, etc... SR-IOV Config pod_trex.yaml +++++++++++++++++++++++++++ .. code-block:: YAML nodes: - name: trafficgen_1 role: TrafficGen ip: 1.1.1.1 user: root password: r00t key_filename: /root/.ssh/id_rsa interfaces: xe0: # logical name from topology.yaml and vnfd.yaml vpci: "0000:07:00.0" driver: i40e # default kernel driver dpdk_port_num: 0 local_ip: "152.16.100.20" netmask: "255.255.255.0" local_mac: "00:00:00:00:00:01" xe1: # logical name from topology.yaml and vnfd.yaml vpci: "0000:07:00.1" driver: i40e # default kernel driver dpdk_port_num: 1 local_ip: "152.16.40.20" netmask: "255.255.255.0" local_mac: "00:00.00:00:00:02" SR-IOV Config host_sriov.yaml +++++++++++++++++++++++++++++ .. code-block:: YAML nodes: - name: sriov role: Sriov ip: 192.168.100.101 user: "" password: "" SR-IOV testcase update: ``./samples/vnf_samples/nsut/vfw/tc_sriov_rfc2544_ipv4_1rule_1flow_64B_trex.yaml`` Update contexts section ''''''''''''''''''''''' .. code-block:: YAML contexts: - name: yardstick type: Node file: /etc/yardstick/nodes/standalone/pod_trex.yaml - type: StandaloneSriov file: /etc/yardstick/nodes/standalone/host_sriov.yaml name: yardstick vm_deploy: True flavor: images: "/var/lib/libvirt/images/ubuntu.qcow2" ram: 4096 extra_specs: hw:cpu_sockets: 1 hw:cpu_cores: 6 hw:cpu_threads: 2 user: "" # update VM username password: "" # update password servers: vnf: network_ports: mgmt: cidr: '1.1.1.61/24' # Update VM IP address, if static, / or if dynamic, / xe0: - uplink_0 xe1: - downlink_0 networks: uplink_0: phy_port: "0000:05:00.0" vpci: "0000:00:07.0" cidr: '152.16.100.10/24' gateway_ip: '152.16.100.20' downlink_0: phy_port: "0000:05:00.1" vpci: "0000:00:08.0" cidr: '152.16.40.10/24' gateway_ip: '152.16.100.20' OVS-DPDK ^^^^^^^^ OVS-DPDK Pre-requisites +++++++++++++++++++++++ On Host, where VM is created: a) Create and configure a bridge named ``br-int`` for VM to connect to external network. Currently this can be done using VXLAN tunnel. Execute the following on host, where VM is created: .. code-block:: console ip link add type vxlan remote local id dstport 4789 brctl addbr br-int brctl addif br-int vxlan0 ip link set dev vxlan0 up ip addr add dev br-int ip link set dev br-int up .. note:: May be needed to add extra rules to iptable to forward traffic. .. code-block:: console iptables -A FORWARD -i br-int -s / -j ACCEPT iptables -A FORWARD -o br-int -d / -j ACCEPT Execute the following on a jump host: .. code-block:: console ip link add type vxlan remote local id dstport 4789 ip addr add dev vxlan0 ip link set dev vxlan0 up .. note:: Host and jump host are different baremetal servers. b) Modify test case management CIDR. IP addresses IP#1, IP#2 and CIDR must be in the same network. .. code-block:: YAML servers: vnf: network_ports: mgmt: cidr: '1.1.1.7/24' c) Build guest image for VNF to run. Most of the sample test cases in Yardstick are using a guest image called ``yardstick-nsb-image`` which deviates from an Ubuntu Cloud Server image Yardstick has a tool for building this custom image with SampleVNF. It is necessary to have ``sudo`` rights to use this tool. You may need to install several additional packages to use this tool, by following the commands below:: sudo apt-get update && sudo apt-get install -y qemu-utils kpartx This image can be built using the following command in the directory where Yardstick is installed:: export YARD_IMG_ARCH='amd64' sudo echo "Defaults env_keep += \'YARD_IMG_ARCH\'" >> /etc/sudoers sudo tools/yardstick-img-dpdk-modify tools/ubuntu-server-cloudimg-samplevnf-modify.sh for more details refer to chapter :doc:`04-installation` .. note:: VM should be build with static IP and should be accessible from yardstick host. 3. OVS & DPDK version. * OVS 2.7 and DPDK 16.11.1 above version is supported 4. Setup `OVS-DPDK`_ on host. OVS-DPDK Config pod.yaml describing Topology ++++++++++++++++++++++++++++++++++++++++++++ OVS-DPDK 2-Node setup +++++++++++++++++++++ .. code-block:: console +--------------------+ | | | | | DUT | | (VNF) | | | +--------------------+ | virtio | | virtio | +--------+ +--------+ ^ ^ | | | | +--------+ +--------+ | vHOST0 | | vHOST1 | +----------+ +-------------------------+ | | | ^ ^ | | | | | | | | | (0)<----->(0) | ------ | | | TG1 | | SUT | | | | | (ovs-dpdk) | | | | (n)<----->(n) |------------------ | +----------+ +-------------------------+ trafficgen_1 host OVS-DPDK 3-Node setup - Correlated Traffic ++++++++++++++++++++++++++++++++++++++++++ .. code-block:: console +--------------------+ | | | | | DUT | | (VNF) | | | +--------------------+ | virtio | | virtio | +--------+ +--------+ ^ ^ | | | | +--------+ +--------+ | vHOST0 | | vHOST1 | +----------+ +-------------------------+ +------------+ | | | ^ ^ | | | | | | | | | | | | | (0)<----->(0) | ------ | | | TG2 | | TG1 | | SUT | | |(UDP Replay)| | | | (ovs-dpdk) | | | | | | (n)<----->(n) | ------ |(n)<-->(n)| | +----------+ +-------------------------+ +------------+ trafficgen_1 host trafficgen_2 Before executing Yardstick test cases, make sure that the ``pod.yaml`` reflects the topology and update all the required fields:: cp ./etc/yardstick/nodes/standalone/trex_bm.yaml.sample /etc/yardstick/nodes/standalone/pod_trex.yaml cp ./etc/yardstick/nodes/standalone/host_ovs.yaml /etc/yardstick/nodes/standalone/host_ovs.yaml .. note:: Update all the required fields like ip, user, password, pcis, etc... OVS-DPDK Config pod_trex.yaml +++++++++++++++++++++++++++++ .. code-block:: YAML nodes: - name: trafficgen_1 role: TrafficGen ip: 1.1.1.1 user: root password: r00t interfaces: xe0: # logical name from topology.yaml and vnfd.yaml vpci: "0000:07:00.0" driver: i40e # default kernel driver dpdk_port_num: 0 local_ip: "152.16.100.20" netmask: "255.255.255.0" local_mac: "00:00:00:00:00:01" xe1: # logical name from topology.yaml and vnfd.yaml vpci: "0000:07:00.1" driver: i40e # default kernel driver dpdk_port_num: 1 local_ip: "152.16.40.20" netmask: "255.255.255.0" local_mac: "00:00.00:00:00:02" OVS-DPDK Config host_ovs.yaml +++++++++++++++++++++++++++++ .. code-block:: YAML nodes: - name: ovs_dpdk role: OvsDpdk ip: 192.168.100.101 user: "" password: "" ovs_dpdk testcase update: ``./samples/vnf_samples/nsut/vfw/tc_ovs_rfc2544_ipv4_1rule_1flow_64B_trex.yaml`` Update contexts section ''''''''''''''''''''''' .. code-block:: YAML contexts: - name: yardstick type: Node file: /etc/yardstick/nodes/standalone/pod_trex.yaml - type: StandaloneOvsDpdk name: yardstick file: /etc/yardstick/nodes/standalone/pod_ovs.yaml vm_deploy: True ovs_properties: version: ovs: 2.7.0 dpdk: 16.11.1 pmd_threads: 2 ram: socket_0: 2048 socket_1: 2048 queues: 4 vpath: "/usr/local" flavor: images: "/var/lib/libvirt/images/ubuntu.qcow2" ram: 4096 extra_specs: hw:cpu_sockets: 1 hw:cpu_cores: 6 hw:cpu_threads: 2 user: "" # update VM username password: "" # update password servers: vnf: network_ports: mgmt: cidr: '1.1.1.61/24' # Update VM IP address, if static, / or if dynamic, / xe0: - uplink_0 xe1: - downlink_0 networks: uplink_0: phy_port: "0000:05:00.0" vpci: "0000:00:07.0" cidr: '152.16.100.10/24' gateway_ip: '152.16.100.20' downlink_0: phy_port: "0000:05:00.1" vpci: "0000:00:08.0" cidr: '152.16.40.10/24' gateway_ip: '152.16.100.20' OpenStack with SR-IOV support ----------------------------- This section describes how to run a Sample VNF test case, using Heat context, with SR-IOV. It also covers how to install OpenStack in Ubuntu 16.04, using DevStack, with SR-IOV support. Single node OpenStack with external TG ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ .. code-block:: console +----------------------------+ |OpenStack(DevStack) | | | | +--------------------+ | | |sample-VNF VM | | | | | | | | DUT | | | | (VNF) | | | | | | | +--------+ +--------+ | | | VF NIC | | VF NIC | | | +-----+--+--+----+---+ | | ^ ^ | | | | | +----------+ +---------+----------+-------+ | | | VF0 VF1 | | | | ^ ^ | | | | | SUT | | | TG | (PF0)<----->(PF0) +---------+ | | | | | | | | | (PF1)<----->(PF1) +--------------------+ | | | | | +----------+ +----------------------------+ trafficgen_1 host Host pre-configuration ++++++++++++++++++++++ .. warning:: The following configuration requires sudo access to the system. Make sure that your user have the access. Enable the Intel VT-d or AMD-Vi extension in the BIOS. Some system manufacturers disable this extension by default. Activate the Intel VT-d or AMD-Vi extension in the kernel by modifying the GRUB config file ``/etc/default/grub``. For the Intel platform:: ... GRUB_CMDLINE_LINUX_DEFAULT="intel_iommu=on" ... For the AMD platform:: ... GRUB_CMDLINE_LINUX_DEFAULT="amd_iommu=on" ... Update the grub configuration file and restart the system: .. warning:: The following command will reboot the system. .. code:: bash sudo update-grub sudo reboot Make sure the extension has been enabled:: sudo journalctl -b 0 | grep -e IOMMU -e DMAR Feb 06 14:50:14 hostname kernel: ACPI: DMAR 0x000000006C406000 0001E0 (v01 INTEL S2600WF 00000001 INTL 20091013) Feb 06 14:50:14 hostname kernel: DMAR: IOMMU enabled Feb 06 14:50:14 hostname kernel: DMAR: Host address width 46 Feb 06 14:50:14 hostname kernel: DMAR: DRHD base: 0x000000d37fc000 flags: 0x0 Feb 06 14:50:14 hostname kernel: DMAR: dmar0: reg_base_addr d37fc000 ver 1:0 cap 8d2078c106f0466 ecap f020de Feb 06 14:50:14 hostname kernel: DMAR: DRHD base: 0x000000e0ffc000 flags: 0x0 Feb 06 14:50:14 hostname kernel: DMAR: dmar1: reg_base_addr e0ffc000 ver 1:0 cap 8d2078c106f0466 ecap f020de Feb 06 14:50:14 hostname kernel: DMAR: DRHD base: 0x000000ee7fc000 flags: 0x0 .. TODO: Refer to the yardstick installation guide for proxy set up Setup system proxy (if needed). Add the following configuration into the ``/etc/environment`` file: .. note:: The proxy server name/port and IPs should be changed according to actual/current proxy configuration in the lab. .. code:: bash export http_proxy=http://proxy.company.com:port export https_proxy=http://proxy.company.com:port export ftp_proxy=http://proxy.company.com:port export no_proxy=localhost,127.0.0.1,company.com,,,... export NO_PROXY=localhost,127.0.0.1,company.com,,,... Upgrade the system: .. code:: bash sudo -EH apt-get update sudo -EH apt-get upgrade sudo -EH apt-get dist-upgrade Install dependencies needed for DevStack .. code:: bash sudo -EH apt-get install python python-dev python-pip Setup SR-IOV ports on the host: .. note:: The ``enp24s0f0``, ``enp24s0f1`` are physical function (PF) interfaces on a host and ``enp24s0f3`` is a public interface used in OpenStack, so the interface names should be changed according to the HW environment used for testing. .. code:: bash sudo ip link set dev enp24s0f0 up sudo ip link set dev enp24s0f1 up sudo ip link set dev enp24s0f3 up # Create VFs on PF echo 2 | sudo tee /sys/class/net/enp24s0f0/device/sriov_numvfs echo 2 | sudo tee /sys/class/net/enp24s0f1/device/sriov_numvfs DevStack installation +++++++++++++++++++++ If you want to try out NSB, but don't have OpenStack set-up, you can use `Devstack`_ to install OpenStack on a host. Please note, that the ``stable/pike`` branch of devstack repo should be used during the installation. The required ``local.conf`` configuration file are described below. DevStack configuration file: .. note:: Update the devstack configuration file by replacing angluar brackets with a short description inside. .. note:: Use ``lspci | grep Ether`` & ``lspci -n | grep `` commands to get device and vendor id of the virtual function (VF). .. literalinclude:: code/single-devstack-local.conf :language: console Start the devstack installation on a host. TG host configuration +++++++++++++++++++++ Yardstick automatically installs and configures Trex traffic generator on TG host based on provided POD file (see below). Anyway, it's recommended to check the compatibility of the installed NIC on the TG server with software Trex using the `manual `_. Run the Sample VNF test case ++++++++++++++++++++++++++++ There is an example of Sample VNF test case ready to be executed in an OpenStack environment with SR-IOV support: ``samples/vnf_samples/nsut/vfw/ tc_heat_sriov_external_rfc2544_ipv4_1rule_1flow_64B_trex.yaml``. Install Yardstick using `Install Yardstick (NSB Testing)`_ steps for OpenStack context. Create pod file for TG in the yardstick repo folder located in the yardstick container: .. note:: The ``ip``, ``user``, ``password`` and ``vpci`` fields show be changed according to HW environment used for the testing. Use ``lshw -c network -businfo`` command to get the PF PCI address for ``vpci`` field. .. literalinclude:: code/single-yardstick-pod.conf :language: console Run the Sample vFW RFC2544 SR-IOV TC (``samples/vnf_samples/nsut/vfw/ tc_heat_sriov_external_rfc2544_ipv4_1rule_1flow_64B_trex.yaml``) in the heat context using steps described in `NS testing - using yardstick CLI`_ section. Multi node OpenStack TG and VNF setup (two nodes) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .. code-block:: console +----------------------------+ +----------------------------+ |OpenStack(DevStack) | |OpenStack(DevStack) | | | | | | +--------------------+ | | +--------------------+ | | |sample-VNF VM | | | |sample-VNF VM | | | | | | | | | | | | TG | | | | DUT | | | | trafficgen_1 | | | | (VNF) | | | | | | | | | | | +--------+ +--------+ | | +--------+ +--------+ | | | VF NIC | | VF NIC | | | | VF NIC | | VF NIC | | | +----+---+--+----+---+ | | +-----+--+--+----+---+ | | ^ ^ | | ^ ^ | | | | | | | | | +--------+-----------+-------+ +---------+----------+-------+ | VF0 VF1 | | VF0 VF1 | | ^ ^ | | ^ ^ | | | SUT2 | | | | SUT1 | | | | +-------+ (PF0)<----->(PF0) +---------+ | | | | | | | | | +-------------------+ (PF1)<----->(PF1) +--------------------+ | | | | | +----------------------------+ +----------------------------+ host2 (compute) host1 (controller) Controller/Compute pre-configuration ++++++++++++++++++++++++++++++++++++ Pre-configuration of the controller and compute hosts are the same as described in `Host pre-configuration`_ section. DevStack configuration ++++++++++++++++++++++ A reference ``local.conf`` for deploying OpenStack in a multi-host environment using `Devstack`_ is shown in this section. The ``stable/pike`` branch of devstack repo should be used during the installation. .. note:: Update the devstack configuration files by replacing angluar brackets with a short description inside. .. note:: Use ``lspci | grep Ether`` & ``lspci -n | grep `` commands to get device and vendor id of the virtual function (VF). DevStack configuration file for controller host: .. literalinclude:: code/multi-devstack-controller-local.conf :language: console DevStack configuration file for compute host: .. literalinclude:: code/multi-devstack-compute-local.conf :language: console Start the devstack installation on the controller and compute hosts. Run the sample vFW TC +++++++++++++++++++++ Install Yardstick using `Install Yardstick (NSB Testing)`_ steps for OpenStack context. Run the sample vFW RFC2544 SR-IOV test case (``samples/vnf_samples/nsut/vfw/tc_heat_rfc2544_ipv4_1rule_1flow_64B_trex.yaml``) in the heat context using steps described in `NS testing - using yardstick CLI`_ section and the following Yardstick command line arguments: .. code:: bash yardstick -d task start --task-args='{"provider": "sriov"}' \ samples/vnf_samples/nsut/vfw/tc_heat_rfc2544_ipv4_1rule_1flow_64B_trex.yaml Enabling other Traffic generators --------------------------------- IxLoad ~~~~~~ 1. Software needed: IxLoadAPI ``Linux64.bin.tgz`` and ``Linux64.bin.tar.gz`` (Download from ixia support site) Install - ``Linux64.bin.tgz`` and ``Linux64.bin.tar.gz`` If the installation was not done inside the container, after installing the IXIA client, check ``/opt/ixia/ixload//bin/ixloadpython`` and make sure you can run this cmd inside the yardstick container. Usually user is required to copy or link ``/opt/ixia/python//bin/ixiapython`` to ``/usr/bin/ixiapython`` inside the container. 2. Update ``pod_ixia.yaml`` file with ixia details. .. code-block:: console cp ./etc/yardstick/nodes/pod.yaml.nsb.sample.ixia \ /etc/yardstick/nodes/pod_ixia.yaml Config ``pod_ixia.yaml`` .. literalinclude:: code/pod_ixia.yaml :language: console for sriov/ovs_dpdk pod files, please refer to `Standalone Virtualization`_ for ovs-dpdk/sriov configuration 3. Start IxOS TCL Server (Install 'Ixia IxExplorer IxOS ') You will also need to configure the IxLoad machine to start the IXIA IxosTclServer. This can be started like so: * Connect to the IxLoad machine using RDP * Go to: ``Start->Programs->Ixia->IxOS->IxOS 8.01-GA-Patch1->Ixia Tcl Server IxOS 8.01-GA-Patch1`` or ``C:\Program Files (x86)\Ixia\IxOS\8.01-GA-Patch1\ixTclServer.exe`` 4. Create a folder ``Results`` in c:\ and share the folder on the network. 5. Execute testcase in samplevnf folder e.g. ``./samples/vnf_samples/nsut/vfw/tc_baremetal_http_ixload_1b_Requests-65000_Concurrency.yaml`` IxNetwork ^^^^^^^^^ IxNetwork testcases use IxNetwork API Python Bindings module, which is installed as part of the requirements of the project. 1. Update ``pod_ixia.yaml`` file with ixia details. .. code-block:: console cp ./etc/yardstick/nodes/pod.yaml.nsb.sample.ixia \ /etc/yardstick/nodes/pod_ixia.yaml Configure ``pod_ixia.yaml`` .. literalinclude:: code/pod_ixia.yaml :language: console for sriov/ovs_dpdk pod files, please refer to above `Standalone Virtualization`_ for ovs-dpdk/sriov configuration 2. Start IxNetwork TCL Server You will also need to configure the IxNetwork machine to start the IXIA IxNetworkTclServer. This can be started like so: * Connect to the IxNetwork machine using RDP * Go to: ``Start->Programs->Ixia->IxNetwork->IxNetwork 7.21.893.14 GA->IxNetworkTclServer`` (or ``IxNetworkApiServer``) 3. Execute testcase in samplevnf folder e.g. ``./samples/vnf_samples/nsut/vfw/tc_baremetal_rfc2544_ipv4_1rule_1flow_64B_ixia.yaml`` Spirent Landslide ----------------- In order to use Spirent Landslide for vEPC testcases, some dependencies have to be preinstalled and properly configured. - Java 32-bit Java installation is required for the Spirent Landslide TCL API. | ``$ sudo apt-get install openjdk-8-jdk:i386`` .. important:: Make sure ``LD_LIBRARY_PATH`` is pointing to 32-bit JRE. For more details check `Linux Troubleshooting ` section of installation instructions. - LsApi (Tcl API module) Follow Landslide documentation for detailed instructions on Linux installation of Tcl API and its dependencies ``http://TAS_HOST_IP/tclapiinstall.html``. For working with LsApi Python wrapper only steps 1-5 are required. .. note:: After installation make sure your API home path is included in ``PYTHONPATH`` environment variable. .. important:: The current version of LsApi module has an issue with reading LD_LIBRARY_PATH. For LsApi module to initialize correctly following lines (184-186) in lsapi.py .. code-block:: python ldpath = os.environ.get('LD_LIBRARY_PATH', '') if ldpath == '': environ['LD_LIBRARY_PATH'] = environ['LD_LIBRARY_PATH'] + ':' + ldpath should be changed to: .. code-block:: python ldpath = os.environ.get('LD_LIBRARY_PATH', '') if not ldpath == '': environ['LD_LIBRARY_PATH'] = environ['LD_LIBRARY_PATH'] + ':' + ldpath .. note:: The Spirent landslide TCL software package needs to be updated in case the user upgrades to a new version of Spirent landslide software.