.. This work is licensed under a Creative Commons Attribution 4.0 International .. License. .. http://creativecommons.org/licenses/by/4.0 .. (c) OPNFV, Ericsson AB, Huawei Technologies Co.,Ltd and others. .. Convention for heading levels in Yardstick documentation: ======= Heading 0 (reserved for the title in a document) ------- Heading 1 ~~~~~~~ Heading 2 +++++++ Heading 3 ''''''' Heading 4 Avoid deeper levels because they do not render well. ====================== Yardstick Installation ====================== Yardstick supports installation by Docker or directly in Ubuntu. The installation procedure for Docker and direct installation are detailed in the sections below. To use Yardstick you should have access to an OpenStack environment, with at least Nova, Neutron, Glance, Keystone and Heat installed. The steps needed to run Yardstick are: 1. Install Yardstick. 2. Load OpenStack environment variables. 3. Create Yardstick flavor. 4. Build a guest image and load it into the OpenStack environment. 5. Create the test configuration ``.yaml`` file and run the test case/suite. Prerequisites ------------- The OPNFV deployment is out of the scope of this document and can be found in `User Guide & Configuration Guide`_. The OPNFV platform is considered as the System Under Test (SUT) in this document. Several prerequisites are needed for Yardstick: 1. A Jumphost to run Yardstick on 2. A Docker daemon or a virtual environment installed on the Jumphost 3. A public/external network created on the SUT 4. Connectivity from the Jumphost to the SUT public/external network .. note:: *Jumphost* refers to any server which meets the previous requirements. Normally it is the same server from where the OPNFV deployment has been triggered. .. warning:: Connectivity from Jumphost is essential and it is of paramount importance to make sure it is working before even considering to install and run Yardstick. Make also sure you understand how your networking is designed to work. .. note:: If your Jumphost is operating behind a company http proxy and/or Firewall, please first consult `Proxy Support`_ section which is towards the end of this document. That section details some tips/tricks which *may* be of help in a proxified environment. Install Yardstick using Docker (first option) (**recommended**) --------------------------------------------------------------- Yardstick has a Docker image. It is recommended to use this Docker image to run Yardstick test. Prepare the Yardstick container ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Install docker on your guest system with the following command, if not done yet:: wget -qO- https://get.docker.com/ | sh Pull the Yardstick Docker image (``opnfv/yardstick``) from the public dockerhub registry under the OPNFV account in dockerhub_, with the following docker command:: sudo -EH docker pull opnfv/yardstick:stable After pulling the Docker image, check that it is available with the following docker command:: [yardsticker@jumphost ~]$ docker images REPOSITORY TAG IMAGE ID CREATED SIZE opnfv/yardstick stable a4501714757a 1 day ago 915.4 MB Run the Docker image to get a Yardstick container:: docker run -itd --privileged -v /var/run/docker.sock:/var/run/docker.sock \ -p 8888:5000 --name yardstick opnfv/yardstick:stable Description of the parameters used with ``docker run`` command +------------------------+--------------------------------------------------+ | Parameters | Detail | +========================+==================================================+ | -itd | -i: interactive, Keep STDIN open even if not | | | attached | | +--------------------------------------------------+ | | -t: allocate a pseudo-TTY detached mode, in the | | | background | +------------------------+--------------------------------------------------+ | --privileged | If you want to build ``yardstick-image`` in | | | Yardstick container, this parameter is needed | +------------------------+--------------------------------------------------+ | -p 8888:5000 | Redirect the a host port (8888) to a container | | | port (5000) | +------------------------+--------------------------------------------------+ | -v /var/run/docker.sock| If you want to use yardstick env | | :/var/run/docker.sock | grafana/influxdb to create a grafana/influxdb | | | container out of Yardstick container | +------------------------+--------------------------------------------------+ | --name yardstick | The name for this container | +------------------------+--------------------------------------------------+ If the host is restarted ^^^^^^^^^^^^^^^^^^^^^^^^ The yardstick container must be started if the host is rebooted:: docker start yardstick Configure the Yardstick container environment ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ There are three ways to configure environments for running Yardstick, explained in the following sections. Before that, access the Yardstick container:: docker exec -it yardstick /bin/bash and then configure Yardstick environments in the Yardstick container. Using the CLI command ``env prepare`` (first way) (**recommended**) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In the Yardstick container, the Yardstick repository is located in the ``/home/opnfv/repos`` directory. Yardstick provides a CLI to prepare OpenStack environment variables and create Yardstick flavor and guest images automatically:: yardstick env prepare .. note:: Since Euphrates release, the above command will not be able to automatically configure the ``/etc/yardstick/openstack.creds`` file. So before running the above command, it is necessary to create the ``/etc/yardstick/openstack.creds`` file and save OpenStack environment variables into it manually. If you have the openstack credential file saved outside the Yardstick Docker container, you can do this easily by mapping the credential file into Yardstick container using:: '-v /path/to/credential_file:/etc/yardstick/openstack.creds' when running the Yardstick container. For details of the required OpenStack environment variables please refer to section `Export OpenStack environment variables`_. The ``env prepare`` command may take up to 6-8 minutes to finish building yardstick-image and other environment preparation. Meanwhile if you wish to monitor the env prepare process, you can enter the Yardstick container in a new terminal window and execute the following command:: tail -f /var/log/yardstick/uwsgi.log Manually exporting the env variables and initializing OpenStack (second way) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Export OpenStack environment variables ###################################### Before running Yardstick it is necessary to export OpenStack environment variables:: source openrc Environment variables in the ``openrc`` file have to include at least:: OS_AUTH_URL OS_USERNAME OS_PASSWORD OS_PROJECT_NAME EXTERNAL_NETWORK A sample ``openrc`` file may look like this:: export OS_PASSWORD=console export OS_PROJECT_NAME=admin export OS_AUTH_URL=http://172.16.1.222:35357/v2.0 export OS_USERNAME=admin export OS_VOLUME_API_VERSION=2 export EXTERNAL_NETWORK=net04_ext Manual creation of Yardstick flavor and guest images #################################################### Before executing Yardstick test cases, make sure that Yardstick flavor and guest image are available in OpenStack. Detailed steps about creating the Yardstick flavor and building the Yardstick guest image can be found below. Most of the sample test cases in Yardstick are using an OpenStack flavor called ``yardstick-flavor`` which deviates from the OpenStack standard ``m1.tiny`` flavor by the disk size; instead of 1GB it has 3GB. Other parameters are the same as in ``m1.tiny``. Create ``yardstick-flavor``:: openstack flavor create --disk 3 --vcpus 1 --ram 512 --swap 100 \ yardstick-flavor Most of the sample test cases in Yardstick are using a guest image called ``yardstick-image`` which deviates from an Ubuntu Cloud Server image containing all the required tools to run test cases supported by Yardstick. Yardstick has a tool for building this custom image. It is necessary to have ``sudo`` rights to use this tool. Also you may need install several additional packages to use this tool, by follwing the commands below:: sudo -EH apt-get update && sudo -EH apt-get install -y qemu-utils kpartx This image can be built using the following command in the directory where Yardstick is installed:: export YARD_IMG_ARCH='amd64' echo "Defaults env_keep += \'YARD_IMG_ARCH\'" | sudo tee --append \ /etc/sudoers > /dev/null sudo -EH tools/yardstick-img-modify tools/ubuntu-server-cloudimg-modify.sh .. warning:: Before building the guest image inside the Yardstick container, make sure the container is granted with privilege. The script will create files by default in ``/tmp/workspace/yardstick`` and the files will be owned by root. The created image can be added to OpenStack using the OpenStack client or via the OpenStack Dashboard:: openstack image create --disk-format qcow2 --container-format bare \ --public --file /tmp/workspace/yardstick/yardstick-image.img \ yardstick-image Some Yardstick test cases use a `Cirros 0.3.5`_ image and/or a `Ubuntu 16.04`_ image. Add Cirros and Ubuntu images to OpenStack:: openstack image create --disk-format qcow2 --container-format bare \ --public --file $cirros_image_file cirros-0.3.5 openstack image create --disk-format qcow2 --container-format bare \ --file $ubuntu_image_file Ubuntu-16.04 Automatic initialization of OpenStack (third way) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Similar to the second way, the first step is also to `Export OpenStack environment variables`_. Then the following steps should be done. Automatic creation of Yardstick flavor and guest images ####################################################### Yardstick has a script for automatically creating Yardstick flavor and building Yardstick guest images. This script is mainly used for CI and can be also used in the local environment:: source $YARDSTICK_REPO_DIR/tests/ci/load_images.sh The Yardstick container GUI ^^^^^^^^^^^^^^^^^^^^^^^^^^^ In Euphrates release, Yardstick implemented a GUI for Yardstick Docker container. After booting up Yardstick container, you can visit the GUI at ``:8888/gui/index.html``. For usage of Yardstick GUI, please watch our demo video at `Yardstick GUI demo`_. .. note:: The Yardstick GUI is still in development, the GUI layout and features may change. Delete the Yardstick container ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ If you want to uninstall Yardstick, just delete the Yardstick container:: sudo docker stop yardstick && docker rm yardstick Install Yardstick directly in Ubuntu (second option) ---------------------------------------------------- .. _install-framework: Alternatively you can install Yardstick framework directly in Ubuntu or in an Ubuntu Docker image. No matter which way you choose to install Yardstick, the following installation steps are identical. If you choose to use the Ubuntu Docker image, you can pull the Ubuntu Docker image from Docker hub:: sudo -EH docker pull ubuntu:16.04 Install Yardstick ^^^^^^^^^^^^^^^^^ Prerequisite preparation:: sudo -EH apt-get update && sudo -EH apt-get install -y \ git python-setuptools python-pip sudo -EH easy_install -U setuptools==30.0.0 sudo -EH pip install appdirs==1.4.0 sudo -EH pip install virtualenv Download the source code and install Yardstick from it:: git clone https://gerrit.opnfv.org/gerrit/yardstick export YARDSTICK_REPO_DIR=~/yardstick cd ~/yardstick sudo -EH ./install.sh If the host is ever restarted, nginx and uwsgi need to be restarted:: service nginx restart uwsgi -i /etc/yardstick/yardstick.ini Configure the Yardstick environment (**Todo**) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ For installing Yardstick directly in Ubuntu, the ``yardstick env`` command is not available. You need to prepare OpenStack environment variables and create Yardstick flavor and guest images manually. Uninstall Yardstick ^^^^^^^^^^^^^^^^^^^ For uninstalling Yardstick, just delete the virtual environment:: rm -rf ~/yardstick_venv Install Yardstick directly in OpenSUSE -------------------------------------- .. _install-framework: You can install Yardstick framework directly in OpenSUSE. Install Yardstick ^^^^^^^^^^^^^^^^^ Prerequisite preparation:: sudo -EH zypper -n install -y gcc \ wget \ git \ sshpass \ qemu-tools \ kpartx \ libffi-devel \ libopenssl-devel \ python \ python-devel \ python-virtualenv \ libxml2-devel \ libxslt-devel \ python-setuptools-git Create a virtual environment:: virtualenv ~/yardstick_venv export YARDSTICK_VENV=~/yardstick_venv source ~/yardstick_venv/bin/activate sudo -EH easy_install -U setuptools Download the source code and install Yardstick from it:: git clone https://gerrit.opnfv.org/gerrit/yardstick export YARDSTICK_REPO_DIR=~/yardstick cd yardstick sudo -EH python setup.py install sudo -EH pip install -r requirements.txt Install missing python modules:: sudo -EH pip install pyyaml \ oslo_utils \ oslo_serialization \ oslo_config \ paramiko \ python.heatclient \ python.novaclient \ python.glanceclient \ python.neutronclient \ scp \ jinja2 Configure the Yardstick environment ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Source the OpenStack environment variables:: source DEVSTACK_DIRECTORY/openrc Export the Openstack external network. The default installation of Devstack names the external network public:: export EXTERNAL_NETWORK=public export OS_USERNAME=demo Change the API version used by Yardstick to v2.0 (the devstack openrc sets it to v3):: export OS_AUTH_URL=http://PUBLIC_IP_ADDRESS:5000/v2.0 Uninstall Yardstick ^^^^^^^^^^^^^^^^^^^ For unistalling Yardstick, just delete the virtual environment:: rm -rf ~/yardstick_venv Verify the installation ----------------------- It is recommended to verify that Yardstick was installed successfully by executing some simple commands and test samples. Before executing Yardstick test cases make sure ``yardstick-flavor`` and ``yardstick-image`` can be found in OpenStack and the ``openrc`` file is sourced. Below is an example invocation of Yardstick ``help`` command and ``ping.py`` test sample:: yardstick -h yardstick task start samples/ping.yaml .. note:: The above commands could be run in both the Yardstick container and the Ubuntu directly. Each testing tool supported by Yardstick has a sample configuration file. These configuration files can be found in the ``samples`` directory. Default location for the output is ``/tmp/yardstick.out``. Deploy InfluxDB and Grafana using Docker ---------------------------------------- Without InfluxDB, Yardstick stores results for running test case in the file ``/tmp/yardstick.out``. However, it's inconvenient to retrieve and display test results. So we will show how to use InfluxDB to store data and use Grafana to display data in the following sections. Automatic deployment of InfluxDB and Grafana containers (**recommended**) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 1. Enter the Yardstick container:: sudo -EH docker exec -it yardstick /bin/bash 2. Create InfluxDB container and configure with the following command:: yardstick env influxdb 3. Create and configure Grafana container:: yardstick env grafana Then you can run a test case and visit http://host_ip:1948 (``admin``/``admin``) to see the results. .. note:: Executing ``yardstick env`` command to deploy InfluxDB and Grafana requires Jumphost's docker API version => 1.24. Run the following command to check the docker API version on the Jumphost:: docker version Manual deployment of InfluxDB and Grafana containers ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ You can also deploy influxDB and Grafana containers manually on the Jumphost. The following sections show how to do. Pull docker images:: sudo -EH docker pull tutum/influxdb sudo -EH docker pull grafana/grafana Run influxDB:: sudo -EH docker run -d --name influxdb \ -p 8083:8083 -p 8086:8086 --expose 8090 --expose 8099 \ tutum/influxdb docker exec -it influxdb influx Configure influxDB:: > CREATE USER root WITH PASSWORD 'root' WITH ALL PRIVILEGES > CREATE DATABASE yardstick; > use yardstick; > show MEASUREMENTS; > quit Run Grafana:: sudo -EH docker run -d --name grafana -p 1948:3000 grafana/grafana Log on to ``http://{YOUR_IP_HERE}:1948`` using ``admin``/``admin`` and configure database resource to be ``{YOUR_IP_HERE}:8086``. .. image:: images/Grafana_config.png :width: 800px :alt: Grafana data source configuration Configure ``yardstick.conf``:: sudo -EH docker exec -it yardstick /bin/bash sudo cp etc/yardstick/yardstick.conf.sample /etc/yardstick/yardstick.conf sudo vi /etc/yardstick/yardstick.conf Modify ``yardstick.conf`` to add the ``influxdb`` dispatcher:: [DEFAULT] debug = True dispatcher = influxdb [dispatcher_influxdb] timeout = 5 target = http://{YOUR_IP_HERE}:8086 db_name = yardstick username = root password = root Now Yardstick will store results in InfluxDB when you run a testcase. Deploy InfluxDB and Grafana directly in Ubuntu (**Todo**) --------------------------------------------------------- Proxy Support ------------- To configure the Jumphost to access Internet through a proxy its necessary to export several variables to the environment, contained in the following script:: #!/bin/sh _proxy= _proxyport= _ip=$(hostname -I | awk '{print $1}') export ftp_proxy=http://$_proxy:$_proxyport export FTP_PROXY=http://$_proxy:$_proxyport export http_proxy=http://$_proxy:$_proxyport export HTTP_PROXY=http://$_proxy:$_proxyport export https_proxy=http://$_proxy:$_proxyport export HTTPS_PROXY=http://$_proxy:$_proxyport export no_proxy=127.0.0.1,localhost,$_ip,$(hostname),<.localdomain> export NO_PROXY=127.0.0.1,localhost,$_ip,$(hostname),<.localdomain> To enable Internet access from a container using ``docker``, depends on the OS version. On Ubuntu 14.04 LTS, which uses SysVinit, ``/etc/default/docker`` must be modified:: ....... # If you need Docker to use an HTTP proxy, it can also be specified here. export http_proxy="http://:/" export https_proxy="https://:/" Then its necessary to restart the ``docker`` service:: sudo -EH service docker restart In Ubuntu 16.04 LTS, which uses Systemd, its necessary to create a drop-in directory:: sudo mkdir /etc/systemd/system/docker.service.d Then, the proxy configuration will be stored in the following file:: # cat /etc/systemd/system/docker.service.d/http-proxy.conf [Service] Environment="HTTP_PROXY=https://:/" Environment="HTTPS_PROXY=https://:/" Environment="NO_PROXY=localhost,127.0.0.1,,<.localdomain>" The changes need to be flushed and the ``docker`` service restarted:: sudo systemctl daemon-reload sudo systemctl restart docker Any container is already created won't contain these modifications. If needed, stop and delete the container:: sudo docker stop yardstick sudo docker rm yardstick .. warning:: Be careful, the above ``rm`` command will delete the container completely. Everything on this container will be lost. Then follow the previous instructions `Prepare the Yardstick container`_ to rebuild the Yardstick container. References ---------- .. _`User Guide & Configuration Guide`: http://docs.opnfv.org/en/latest/release/userguide.introduction.html .. _dockerhub: https://hub.docker.com/r/opnfv/yardstick/ .. _`Cirros 0.3.5`: http://download.cirros-cloud.net/0.3.5/cirros-0.3.5-x86_64-disk.img .. _`Ubuntu 16.04`: https://cloud-images.ubuntu.com/xenial/current/xenial-server-cloudimg-amd64-disk1.img .. _`Yardstick GUI demo`: https://www.youtube.com/watch?v=M3qbJDp6QBk