From 0ce79677b81b47a7f66e43af896cfa9632da6bee Mon Sep 17 00:00:00 2001 From: JingLu5 Date: Thu, 30 Mar 2017 11:50:02 +0000 Subject: add yardstick_user_interface chapter in userguide JIRA: YARDSTICK-618 Change-Id: I690c24d665016a381ae1ed7d8fa94d5a34bc1b1b Signed-off-by: JingLu5 --- docs/testing/user/userguide/01-introduction.rst | 16 +- docs/testing/user/userguide/09-vtc-overview.rst | 128 --------- .../user/userguide/09-yardstick_user_interface.rst | 29 ++ .../user/userguide/10-apexlake_installation.rst | 302 --------------------- docs/testing/user/userguide/10-vtc-overview.rst | 128 +++++++++ docs/testing/user/userguide/11-apexlake_api.rst | 89 ------ .../user/userguide/11-apexlake_installation.rst | 302 +++++++++++++++++++++ docs/testing/user/userguide/12-apexlake_api.rst | 89 ++++++ docs/testing/user/userguide/12-nsb-overview.rst | 194 ------------- docs/testing/user/userguide/13-nsb-overview.rst | 194 +++++++++++++ .../testing/user/userguide/13-nsb_installation.rst | 238 ---------------- docs/testing/user/userguide/14-list-of-tcs.rst | 129 --------- .../testing/user/userguide/14-nsb_installation.rst | 238 ++++++++++++++++ docs/testing/user/userguide/15-list-of-tcs.rst | 129 +++++++++ .../user/userguide/Yardstick_user_interface.rst | 29 -- docs/testing/user/userguide/index.rst | 13 +- 16 files changed, 1126 insertions(+), 1121 deletions(-) delete mode 100644 docs/testing/user/userguide/09-vtc-overview.rst create mode 100644 docs/testing/user/userguide/09-yardstick_user_interface.rst delete mode 100644 docs/testing/user/userguide/10-apexlake_installation.rst create mode 100644 docs/testing/user/userguide/10-vtc-overview.rst delete mode 100644 docs/testing/user/userguide/11-apexlake_api.rst create mode 100644 docs/testing/user/userguide/11-apexlake_installation.rst create mode 100644 docs/testing/user/userguide/12-apexlake_api.rst delete mode 100644 docs/testing/user/userguide/12-nsb-overview.rst create mode 100644 docs/testing/user/userguide/13-nsb-overview.rst delete mode 100644 docs/testing/user/userguide/13-nsb_installation.rst delete mode 100644 docs/testing/user/userguide/14-list-of-tcs.rst create mode 100644 docs/testing/user/userguide/14-nsb_installation.rst create mode 100644 docs/testing/user/userguide/15-list-of-tcs.rst delete mode 100644 docs/testing/user/userguide/Yardstick_user_interface.rst (limited to 'docs') diff --git a/docs/testing/user/userguide/01-introduction.rst b/docs/testing/user/userguide/01-introduction.rst index 4fc94ac62..63d0d9883 100755 --- a/docs/testing/user/userguide/01-introduction.rst +++ b/docs/testing/user/userguide/01-introduction.rst @@ -61,22 +61,26 @@ This document consists of the following chapters: * Chapter :doc:`08-api` provides inforamtion on *Yardstick* ReST API and how to use *Yardstick* API. -* Chapter :doc:`09-vtc-overview` provides information on the :term:`VTC`. +* Chapter :doc:`09-yardstick_user_interface` provides inforamtion on how to use + yardstick report CLI to view the test result in table format and also values + pinned on to a graph -* Chapter :doc:`10-apexlake_installation` provides instructions to install the +* Chapter :doc:`10-vtc-overview` provides information on the :term:`VTC`. + +* Chapter :doc:`11-apexlake_installation` provides instructions to install the experimental framework *ApexLake* -* Chapter :doc:`11-apexlake_api` explains how this framework is integrated in +* Chapter :doc:`12-apexlake_api` explains how this framework is integrated in *Yardstick*. -* Chapter :doc:`12-nsb-overview` describes the methodology implemented by the +* Chapter :doc:`13-nsb-overview` describes the methodology implemented by the Yardstick - Network service benchmarking to test real world usecase for a given VNF. -* Chapter :doc:`13-nsb_installation` provides instructions to install +* Chapter :doc:`14-nsb_installation` provides instructions to install *Yardstick - Network service benchmarking testing*. -* Chapter :doc:`14-list-of-tcs` includes a list of available *Yardstick* test +* Chapter :doc:`15-list-of-tcs` includes a list of available *Yardstick* test cases. diff --git a/docs/testing/user/userguide/09-vtc-overview.rst b/docs/testing/user/userguide/09-vtc-overview.rst deleted file mode 100644 index 8ed17873d..000000000 --- a/docs/testing/user/userguide/09-vtc-overview.rst +++ /dev/null @@ -1,128 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, National Center of Scientific Research "Demokritos" and others. - -========================== -Virtual Traffic Classifier -========================== - -Abstract -======== - -.. _TNOVA: http://www.t-nova.eu/ -.. _TNOVAresults: http://www.t-nova.eu/results/ -.. _Yardstick: https://wiki.opnfv.org/yardstick - -This chapter provides an overview of the virtual Traffic Classifier, a -contribution to OPNFV Yardstick_ from the EU Project TNOVA_. -Additional documentation is available in TNOVAresults_. - -Overview -======== - -The virtual Traffic Classifier (:term:`VTC`) :term:`VNF`, comprises of a -Virtual Network Function Component (:term:`VNFC`). The :term:`VNFC` contains -both the Traffic Inspection module, and the Traffic forwarding module, needed -to run the :term:`VNF`. The exploitation of Deep Packet Inspection -(:term:`DPI`) methods for traffic classification is built around two basic -assumptions: - -* third parties unaffiliated with either source or recipient are able to -inspect each IP packet’s payload - -* the classifier knows the relevant syntax of each application’s packet -payloads (protocol signatures, data patterns, etc.). - -The proposed :term:`DPI` based approach will only use an indicative, small -number of the initial packets from each flow in order to identify the content -and not inspect each packet. - -In this respect it follows the Packet Based per Flow State (term:`PBFS`). This -method uses a table to track each session based on the 5-tuples (src address, -dest address, src port,dest port, transport protocol) that is maintained for -each flow. - -Concepts -======== - -* *Traffic Inspection*: The process of packet analysis and application -identification of network traffic that passes through the :term:`VTC`. - -* *Traffic Forwarding*: The process of packet forwarding from an incoming -network interface to a pre-defined outgoing network interface. - -* *Traffic Rule Application*: The process of packet tagging, based on a -predefined set of rules. Packet tagging may include e.g. Type of Service -(:term:`ToS`) field modification. - -Architecture -============ - -The Traffic Inspection module is the most computationally intensive component -of the :term:`VNF`. It implements filtering and packet matching algorithms in -order to support the enhanced traffic forwarding capability of the :term:`VNF`. -The component supports a flow table (exploiting hashing algorithms for fast -indexing of flows) and an inspection engine for traffic classification. - -The implementation used for these experiments exploits the nDPI library. -The packet capturing mechanism is implemented using libpcap. When the -:term:`DPI` engine identifies a new flow, the flow register is updated with the -appropriate information and transmitted across the Traffic Forwarding module, -which then applies any required policy updates. - -The Traffic Forwarding moudle is responsible for routing and packet forwarding. -It accepts incoming network traffic, consults the flow table for classification -information for each incoming flow and then applies pre-defined policies -marking e.g. :term:`ToS`/Differentiated Services Code Point (:term:`DSCP`) -multimedia traffic for Quality of Service (:term:`QoS`) enablement on the -forwarded traffic. -It is assumed that the traffic is forwarded using the default policy until it -is identified and new policies are enforced. - -The expected response delay is considered to be negligible, as only a small -number of packets are required to identify each flow. - -Graphical Overview -================== - -.. code-block:: console - - +----------------------------+ - | | - | Virtual Traffic Classifier | - | | - | Analysing/Forwarding | - | ------------> | - | ethA ethB | - | | - +----------------------------+ - | ^ - | | - v | - +----------------------------+ - | | - | Virtual Switch | - | | - +----------------------------+ - -Install -======= - -run the vTC/build.sh with root privileges - -Run -=== - -:: - - sudo ./pfbridge -a eth1 -b eth2 - - -.. note:: Virtual Traffic Classifier is not support in OPNFV Danube release. - - -Development Environment -======================= - -Ubuntu 14.04 Ubuntu 16.04 diff --git a/docs/testing/user/userguide/09-yardstick_user_interface.rst b/docs/testing/user/userguide/09-yardstick_user_interface.rst new file mode 100644 index 000000000..9058dd46d --- /dev/null +++ b/docs/testing/user/userguide/09-yardstick_user_interface.rst @@ -0,0 +1,29 @@ +Yardstick User Interface +======================== + +This interface provides a user to view the test result +in table format and also values pinned on to a graph. + + +Command +------- +:: + + yardstick report generate + + +Description +----------- + +1. When the command is triggered using the task-id and the testcase +name provided the respective values are retrieved from the +database (influxdb in this particular case). + +2. The values are then formatted and then provided to the html +template framed with complete html body using Django Framework. + +3. Then the whole template is written into a html file. + +The graph is framed with Timestamp on x-axis and output values +(differ from testcase to testcase) on y-axis with the help of +"Highcharts". diff --git a/docs/testing/user/userguide/10-apexlake_installation.rst b/docs/testing/user/userguide/10-apexlake_installation.rst deleted file mode 100644 index 0d8ef143f..000000000 --- a/docs/testing/user/userguide/10-apexlake_installation.rst +++ /dev/null @@ -1,302 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, Intel Corporation and others. - - -.. _DPDK: http://dpdk.org/doc/nics -.. _DPDK-pktgen: https://github.com/Pktgen/Pktgen-DPDK/ -.. _SRIOV: https://wiki.openstack.org/wiki/SR-IOV-Passthrough-For-Networking -.. _PORTSEC: https://wiki.openstack.org/wiki/Neutron/ML2PortSecurityExtensionDriver -.. _here: https://wiki.opnfv.org/vtc - - -============================ -Apexlake Installation Guide -============================ - -Abstract --------- - -ApexLake is a framework that provides automatic execution of experiments and -related data collection to enable a user validate infrastructure from the -perspective of a Virtual Network Function (:term:`VNF`). - -In the context of Yardstick, a virtual Traffic Classifier (:term:`VTC`) network -function is utilized. - - -Framework Hardware Dependencies -=============================== - -In order to run the framework there are some hardware related dependencies for -ApexLake. - -The framework needs to be installed on the same physical node where DPDK-pktgen_ -is installed. - -The installation requires the physical node hosting the packet generator must -have 2 NICs which are DPDK_ compatible. - -The 2 NICs will be connected to the switch where the OpenStack VM -network is managed. - -The switch used must support multicast traffic and :term:`IGMP` snooping. -Further details about the configuration are provided at the following here_. - -The corresponding ports to which the cables are connected need to be configured -as VLAN trunks using two of the VLAN IDs available for Neutron. -Note the VLAN IDs used as they will be required in later configuration steps. - - -Framework Software Dependencies -=============================== -Before starting the framework, a number of dependencies must first be installed. -The following describes the set of instructions to be executed via the Linux -shell in order to install and configure the required dependencies. - -1. Install Dependencies. - -To support the framework dependencies the following packages must be installed. -The example provided is based on Ubuntu and needs to be executed in root mode. - -:: - - apt-get install python-dev - apt-get install python-pip - apt-get install python-mock - apt-get install tcpreplay - apt-get install libpcap-dev - -2. Source OpenStack openrc file. - -:: - - source openrc - -3. Configure Openstack Neutron - -In order to support traffic generation and management by the virtual -Traffic Classifier, the configuration of the port security driver -extension is required for Neutron. - -For further details please follow the following link: PORTSEC_ -This step can be skipped in case the target OpenStack is Juno or Kilo release, -but it is required to support Liberty. -It is therefore required to indicate the release version in the configuration -file located in ./yardstick/vTC/apexlake/apexlake.conf - - -4. Create Two Networks based on VLANs in Neutron. - -To enable network communications between the packet generator and the compute -node, two networks must be created via Neutron and mapped to the VLAN IDs -that were previously used in the configuration of the physical switch. -The following shows the typical set of commands required to configure Neutron -correctly. -The physical switches need to be configured accordingly. - -:: - - VLAN_1=2032 - VLAN_2=2033 - PHYSNET=physnet2 - neutron net-create apexlake_inbound_network \ - --provider:network_type vlan \ - --provider:segmentation_id $VLAN_1 \ - --provider:physical_network $PHYSNET - - neutron subnet-create apexlake_inbound_network \ - 192.168.0.0/24 --name apexlake_inbound_subnet - - neutron net-create apexlake_outbound_network \ - --provider:network_type vlan \ - --provider:segmentation_id $VLAN_2 \ - --provider:physical_network $PHYSNET - - neutron subnet-create apexlake_outbound_network 192.168.1.0/24 \ - --name apexlake_outbound_subnet - - -5. Download Ubuntu Cloud Image and load it on Glance - -The virtual Traffic Classifier is supported on top of Ubuntu 14.04 cloud image. -The image can be downloaded on the local machine and loaded on Glance -using the following commands: - -:: - - wget cloud-images.ubuntu.com/trusty/current/trusty-server-cloudimg-amd64-disk1.img - glance image-create \ - --name ubuntu1404 \ - --is-public true \ - --disk-format qcow \ - --container-format bare \ - --file trusty-server-cloudimg-amd64-disk1.img - - - -6. Configure the Test Cases - -The VLAN tags must also be included in the test case Yardstick yaml file -as parameters for the following test cases: - - * :doc:`opnfv_yardstick_tc006` - - * :doc:`opnfv_yardstick_tc007` - - * :doc:`opnfv_yardstick_tc020` - - * :doc:`opnfv_yardstick_tc021` - - -Install and Configure DPDK Pktgen -+++++++++++++++++++++++++++++++++ - -Execution of the framework is based on DPDK Pktgen. -If DPDK Pktgen has not installed, it is necessary to download, install, compile -and configure it. -The user can create a directory and download the dpdk packet generator source -code: - -:: - - cd experimental_framework/libraries - mkdir dpdk_pktgen - git clone https://github.com/pktgen/Pktgen-DPDK.git - -For instructions on the installation and configuration of DPDK and DPDK Pktgen -please follow the official DPDK Pktgen README file. -Once the installation is completed, it is necessary to load the DPDK kernel -driver, as follow: - -:: - - insmod uio - insmod DPDK_DIR/x86_64-native-linuxapp-gcc/kmod/igb_uio.ko - -It is necessary to set the configuration file to support the desired Pktgen -configuration. -A description of the required configuration parameters and supporting examples -is provided in the following: - -:: - - [PacketGen] - packet_generator = dpdk_pktgen - - # This is the directory where the packet generator is installed - # (if the user previously installed dpdk-pktgen, - # it is required to provide the director where it is installed). - pktgen_directory = /home/user/software/dpdk_pktgen/dpdk/examples/pktgen/ - - # This is the directory where DPDK is installed - dpdk_directory = /home/user/apexlake/experimental_framework/libraries/Pktgen-DPDK/dpdk/ - - # Name of the dpdk-pktgen program that starts the packet generator - program_name = app/app/x86_64-native-linuxapp-gcc/pktgen - - # DPDK coremask (see DPDK-Pktgen readme) - coremask = 1f - - # DPDK memory channels (see DPDK-Pktgen readme) - memory_channels = 3 - - # Name of the interface of the pktgen to be used to send traffic (vlan_sender) - name_if_1 = p1p1 - - # Name of the interface of the pktgen to be used to receive traffic (vlan_receiver) - name_if_2 = p1p2 - - # PCI bus address correspondent to if_1 - bus_slot_nic_1 = 01:00.0 - - # PCI bus address correspondent to if_2 - bus_slot_nic_2 = 01:00.1 - - -To find the parameters related to names of the NICs and the addresses of the PCI buses -the user may find it useful to run the :term:`DPDK` tool nic_bind as follows: - -:: - - DPDK_DIR/tools/dpdk_nic_bind.py --status - -Lists the NICs available on the system, and shows the available drivers and bus addresses for each interface. -Please make sure to select NICs which are :term:`DPDK` compatible. - -Installation and Configuration of smcroute -++++++++++++++++++++++++++++++++++++++++++ - -The user is required to install smcroute which is used by the framework to -support multicast communications. - -The following is the list of commands required to download and install smroute. - -:: - - cd ~ - git clone https://github.com/troglobit/smcroute.git - cd smcroute - git reset --hard c3f5c56 - sed -i 's/aclocal-1.11/aclocal/g' ./autogen.sh - sed -i 's/automake-1.11/automake/g' ./autogen.sh - ./autogen.sh - ./configure - make - sudo make install - cd .. - -It is required to do the reset to the specified commit ID. -It is also requires the creation a configuration file using the following -command: - -:: - - SMCROUTE_NIC=(name of the nic) - -where name of the nic is the name used previously for the variable "name_if_2". -For example: - -:: - - SMCROUTE_NIC=p1p2 - -Then create the smcroute configuration file /etc/smcroute.conf - -:: - - echo mgroup from $SMCROUTE_NIC group 224.192.16.1 > /etc/smcroute.conf - - -At the end of this procedure it will be necessary to perform the following -actions to add the user to the sudoers: - -:: - - adduser USERNAME sudo - echo "user ALL=(ALL) NOPASSWD: ALL" >> /etc/sudoers - - -Experiment using SR-IOV Configuration on the Compute Node -+++++++++++++++++++++++++++++++++++++++++++++++++++++++++ - -To enable :term:`SR-IOV` interfaces on the physical NIC of the compute node, a -compatible NIC is required. -NIC configuration depends on model and vendor. After proper configuration to -support :term:`SR-IOV`, a proper configuration of OpenStack is required. -For further information, please refer to the SRIOV_ configuration guide - -Finalize installation the framework on the system -================================================= - -The installation of the framework on the system requires the setup of the project. -After entering into the apexlake directory, it is sufficient to run the following -command. - -:: - - python setup.py install - -Since some elements are copied into the /tmp directory (see configuration file) -it could be necessary to repeat this step after a reboot of the host. diff --git a/docs/testing/user/userguide/10-vtc-overview.rst b/docs/testing/user/userguide/10-vtc-overview.rst new file mode 100644 index 000000000..8ed17873d --- /dev/null +++ b/docs/testing/user/userguide/10-vtc-overview.rst @@ -0,0 +1,128 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, National Center of Scientific Research "Demokritos" and others. + +========================== +Virtual Traffic Classifier +========================== + +Abstract +======== + +.. _TNOVA: http://www.t-nova.eu/ +.. _TNOVAresults: http://www.t-nova.eu/results/ +.. _Yardstick: https://wiki.opnfv.org/yardstick + +This chapter provides an overview of the virtual Traffic Classifier, a +contribution to OPNFV Yardstick_ from the EU Project TNOVA_. +Additional documentation is available in TNOVAresults_. + +Overview +======== + +The virtual Traffic Classifier (:term:`VTC`) :term:`VNF`, comprises of a +Virtual Network Function Component (:term:`VNFC`). The :term:`VNFC` contains +both the Traffic Inspection module, and the Traffic forwarding module, needed +to run the :term:`VNF`. The exploitation of Deep Packet Inspection +(:term:`DPI`) methods for traffic classification is built around two basic +assumptions: + +* third parties unaffiliated with either source or recipient are able to +inspect each IP packet’s payload + +* the classifier knows the relevant syntax of each application’s packet +payloads (protocol signatures, data patterns, etc.). + +The proposed :term:`DPI` based approach will only use an indicative, small +number of the initial packets from each flow in order to identify the content +and not inspect each packet. + +In this respect it follows the Packet Based per Flow State (term:`PBFS`). This +method uses a table to track each session based on the 5-tuples (src address, +dest address, src port,dest port, transport protocol) that is maintained for +each flow. + +Concepts +======== + +* *Traffic Inspection*: The process of packet analysis and application +identification of network traffic that passes through the :term:`VTC`. + +* *Traffic Forwarding*: The process of packet forwarding from an incoming +network interface to a pre-defined outgoing network interface. + +* *Traffic Rule Application*: The process of packet tagging, based on a +predefined set of rules. Packet tagging may include e.g. Type of Service +(:term:`ToS`) field modification. + +Architecture +============ + +The Traffic Inspection module is the most computationally intensive component +of the :term:`VNF`. It implements filtering and packet matching algorithms in +order to support the enhanced traffic forwarding capability of the :term:`VNF`. +The component supports a flow table (exploiting hashing algorithms for fast +indexing of flows) and an inspection engine for traffic classification. + +The implementation used for these experiments exploits the nDPI library. +The packet capturing mechanism is implemented using libpcap. When the +:term:`DPI` engine identifies a new flow, the flow register is updated with the +appropriate information and transmitted across the Traffic Forwarding module, +which then applies any required policy updates. + +The Traffic Forwarding moudle is responsible for routing and packet forwarding. +It accepts incoming network traffic, consults the flow table for classification +information for each incoming flow and then applies pre-defined policies +marking e.g. :term:`ToS`/Differentiated Services Code Point (:term:`DSCP`) +multimedia traffic for Quality of Service (:term:`QoS`) enablement on the +forwarded traffic. +It is assumed that the traffic is forwarded using the default policy until it +is identified and new policies are enforced. + +The expected response delay is considered to be negligible, as only a small +number of packets are required to identify each flow. + +Graphical Overview +================== + +.. code-block:: console + + +----------------------------+ + | | + | Virtual Traffic Classifier | + | | + | Analysing/Forwarding | + | ------------> | + | ethA ethB | + | | + +----------------------------+ + | ^ + | | + v | + +----------------------------+ + | | + | Virtual Switch | + | | + +----------------------------+ + +Install +======= + +run the vTC/build.sh with root privileges + +Run +=== + +:: + + sudo ./pfbridge -a eth1 -b eth2 + + +.. note:: Virtual Traffic Classifier is not support in OPNFV Danube release. + + +Development Environment +======================= + +Ubuntu 14.04 Ubuntu 16.04 diff --git a/docs/testing/user/userguide/11-apexlake_api.rst b/docs/testing/user/userguide/11-apexlake_api.rst deleted file mode 100644 index 35a1dbe3e..000000000 --- a/docs/testing/user/userguide/11-apexlake_api.rst +++ /dev/null @@ -1,89 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, Intel Corporation and others. - - -================================= -Apexlake API Interface Definition -================================= - -Abstract --------- - -The API interface provided by the framework to enable the execution of test -cases is defined as follows. - - -init ----- - -**static init()** - - Initializes the Framework - - **Returns** None - - -execute_framework ------------------ - -**static execute_framework** (test_cases, - - iterations, - - heat_template, - - heat_template_parameters, - - deployment_configuration, - - openstack_credentials) - - Executes the framework according the specified inputs - - **Parameters** - - - **test_cases** - - Test cases to be run with the workload (dict() of dict()) - - Example: - test_case = dict() - - test_case[’name’] = ‘module.Class’ - - test_case[’params’] = dict() - - test_case[’params’][’throughput’] = ‘1’ - - test_case[’params’][’vlan_sender’] = ‘1000’ - - test_case[’params’][’vlan_receiver’] = ‘1001’ - - test_cases = [test_case] - - - **iterations** - Number of test cycles to be executed (int) - - - **heat_template** - (string) File name of the heat template corresponding to the workload to be deployed. - It contains the parameters to be evaluated in the form of #parameter_name. - (See heat_templates/vTC.yaml as example). - - - **heat_template_parameters** - (dict) Parameters to be provided as input to the - heat template. See http://docs.openstack.org/developer/heat/ template_guide/hot_guide.html - section “Template input parameters” for further info. - - - **deployment_configuration** - ( dict[string] = list(strings) ) ) Dictionary of parameters - representing the deployment configuration of the workload. - - The key is a string corresponding to the name of the parameter, - the value is a list of strings representing the value to be - assumed by a specific param. The parameters are user defined: - they have to correspond to the place holders (#parameter_name) - specified in the heat template. - - **Returns** dict() containing results diff --git a/docs/testing/user/userguide/11-apexlake_installation.rst b/docs/testing/user/userguide/11-apexlake_installation.rst new file mode 100644 index 000000000..0d8ef143f --- /dev/null +++ b/docs/testing/user/userguide/11-apexlake_installation.rst @@ -0,0 +1,302 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, Intel Corporation and others. + + +.. _DPDK: http://dpdk.org/doc/nics +.. _DPDK-pktgen: https://github.com/Pktgen/Pktgen-DPDK/ +.. _SRIOV: https://wiki.openstack.org/wiki/SR-IOV-Passthrough-For-Networking +.. _PORTSEC: https://wiki.openstack.org/wiki/Neutron/ML2PortSecurityExtensionDriver +.. _here: https://wiki.opnfv.org/vtc + + +============================ +Apexlake Installation Guide +============================ + +Abstract +-------- + +ApexLake is a framework that provides automatic execution of experiments and +related data collection to enable a user validate infrastructure from the +perspective of a Virtual Network Function (:term:`VNF`). + +In the context of Yardstick, a virtual Traffic Classifier (:term:`VTC`) network +function is utilized. + + +Framework Hardware Dependencies +=============================== + +In order to run the framework there are some hardware related dependencies for +ApexLake. + +The framework needs to be installed on the same physical node where DPDK-pktgen_ +is installed. + +The installation requires the physical node hosting the packet generator must +have 2 NICs which are DPDK_ compatible. + +The 2 NICs will be connected to the switch where the OpenStack VM +network is managed. + +The switch used must support multicast traffic and :term:`IGMP` snooping. +Further details about the configuration are provided at the following here_. + +The corresponding ports to which the cables are connected need to be configured +as VLAN trunks using two of the VLAN IDs available for Neutron. +Note the VLAN IDs used as they will be required in later configuration steps. + + +Framework Software Dependencies +=============================== +Before starting the framework, a number of dependencies must first be installed. +The following describes the set of instructions to be executed via the Linux +shell in order to install and configure the required dependencies. + +1. Install Dependencies. + +To support the framework dependencies the following packages must be installed. +The example provided is based on Ubuntu and needs to be executed in root mode. + +:: + + apt-get install python-dev + apt-get install python-pip + apt-get install python-mock + apt-get install tcpreplay + apt-get install libpcap-dev + +2. Source OpenStack openrc file. + +:: + + source openrc + +3. Configure Openstack Neutron + +In order to support traffic generation and management by the virtual +Traffic Classifier, the configuration of the port security driver +extension is required for Neutron. + +For further details please follow the following link: PORTSEC_ +This step can be skipped in case the target OpenStack is Juno or Kilo release, +but it is required to support Liberty. +It is therefore required to indicate the release version in the configuration +file located in ./yardstick/vTC/apexlake/apexlake.conf + + +4. Create Two Networks based on VLANs in Neutron. + +To enable network communications between the packet generator and the compute +node, two networks must be created via Neutron and mapped to the VLAN IDs +that were previously used in the configuration of the physical switch. +The following shows the typical set of commands required to configure Neutron +correctly. +The physical switches need to be configured accordingly. + +:: + + VLAN_1=2032 + VLAN_2=2033 + PHYSNET=physnet2 + neutron net-create apexlake_inbound_network \ + --provider:network_type vlan \ + --provider:segmentation_id $VLAN_1 \ + --provider:physical_network $PHYSNET + + neutron subnet-create apexlake_inbound_network \ + 192.168.0.0/24 --name apexlake_inbound_subnet + + neutron net-create apexlake_outbound_network \ + --provider:network_type vlan \ + --provider:segmentation_id $VLAN_2 \ + --provider:physical_network $PHYSNET + + neutron subnet-create apexlake_outbound_network 192.168.1.0/24 \ + --name apexlake_outbound_subnet + + +5. Download Ubuntu Cloud Image and load it on Glance + +The virtual Traffic Classifier is supported on top of Ubuntu 14.04 cloud image. +The image can be downloaded on the local machine and loaded on Glance +using the following commands: + +:: + + wget cloud-images.ubuntu.com/trusty/current/trusty-server-cloudimg-amd64-disk1.img + glance image-create \ + --name ubuntu1404 \ + --is-public true \ + --disk-format qcow \ + --container-format bare \ + --file trusty-server-cloudimg-amd64-disk1.img + + + +6. Configure the Test Cases + +The VLAN tags must also be included in the test case Yardstick yaml file +as parameters for the following test cases: + + * :doc:`opnfv_yardstick_tc006` + + * :doc:`opnfv_yardstick_tc007` + + * :doc:`opnfv_yardstick_tc020` + + * :doc:`opnfv_yardstick_tc021` + + +Install and Configure DPDK Pktgen ++++++++++++++++++++++++++++++++++ + +Execution of the framework is based on DPDK Pktgen. +If DPDK Pktgen has not installed, it is necessary to download, install, compile +and configure it. +The user can create a directory and download the dpdk packet generator source +code: + +:: + + cd experimental_framework/libraries + mkdir dpdk_pktgen + git clone https://github.com/pktgen/Pktgen-DPDK.git + +For instructions on the installation and configuration of DPDK and DPDK Pktgen +please follow the official DPDK Pktgen README file. +Once the installation is completed, it is necessary to load the DPDK kernel +driver, as follow: + +:: + + insmod uio + insmod DPDK_DIR/x86_64-native-linuxapp-gcc/kmod/igb_uio.ko + +It is necessary to set the configuration file to support the desired Pktgen +configuration. +A description of the required configuration parameters and supporting examples +is provided in the following: + +:: + + [PacketGen] + packet_generator = dpdk_pktgen + + # This is the directory where the packet generator is installed + # (if the user previously installed dpdk-pktgen, + # it is required to provide the director where it is installed). + pktgen_directory = /home/user/software/dpdk_pktgen/dpdk/examples/pktgen/ + + # This is the directory where DPDK is installed + dpdk_directory = /home/user/apexlake/experimental_framework/libraries/Pktgen-DPDK/dpdk/ + + # Name of the dpdk-pktgen program that starts the packet generator + program_name = app/app/x86_64-native-linuxapp-gcc/pktgen + + # DPDK coremask (see DPDK-Pktgen readme) + coremask = 1f + + # DPDK memory channels (see DPDK-Pktgen readme) + memory_channels = 3 + + # Name of the interface of the pktgen to be used to send traffic (vlan_sender) + name_if_1 = p1p1 + + # Name of the interface of the pktgen to be used to receive traffic (vlan_receiver) + name_if_2 = p1p2 + + # PCI bus address correspondent to if_1 + bus_slot_nic_1 = 01:00.0 + + # PCI bus address correspondent to if_2 + bus_slot_nic_2 = 01:00.1 + + +To find the parameters related to names of the NICs and the addresses of the PCI buses +the user may find it useful to run the :term:`DPDK` tool nic_bind as follows: + +:: + + DPDK_DIR/tools/dpdk_nic_bind.py --status + +Lists the NICs available on the system, and shows the available drivers and bus addresses for each interface. +Please make sure to select NICs which are :term:`DPDK` compatible. + +Installation and Configuration of smcroute +++++++++++++++++++++++++++++++++++++++++++ + +The user is required to install smcroute which is used by the framework to +support multicast communications. + +The following is the list of commands required to download and install smroute. + +:: + + cd ~ + git clone https://github.com/troglobit/smcroute.git + cd smcroute + git reset --hard c3f5c56 + sed -i 's/aclocal-1.11/aclocal/g' ./autogen.sh + sed -i 's/automake-1.11/automake/g' ./autogen.sh + ./autogen.sh + ./configure + make + sudo make install + cd .. + +It is required to do the reset to the specified commit ID. +It is also requires the creation a configuration file using the following +command: + +:: + + SMCROUTE_NIC=(name of the nic) + +where name of the nic is the name used previously for the variable "name_if_2". +For example: + +:: + + SMCROUTE_NIC=p1p2 + +Then create the smcroute configuration file /etc/smcroute.conf + +:: + + echo mgroup from $SMCROUTE_NIC group 224.192.16.1 > /etc/smcroute.conf + + +At the end of this procedure it will be necessary to perform the following +actions to add the user to the sudoers: + +:: + + adduser USERNAME sudo + echo "user ALL=(ALL) NOPASSWD: ALL" >> /etc/sudoers + + +Experiment using SR-IOV Configuration on the Compute Node ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + +To enable :term:`SR-IOV` interfaces on the physical NIC of the compute node, a +compatible NIC is required. +NIC configuration depends on model and vendor. After proper configuration to +support :term:`SR-IOV`, a proper configuration of OpenStack is required. +For further information, please refer to the SRIOV_ configuration guide + +Finalize installation the framework on the system +================================================= + +The installation of the framework on the system requires the setup of the project. +After entering into the apexlake directory, it is sufficient to run the following +command. + +:: + + python setup.py install + +Since some elements are copied into the /tmp directory (see configuration file) +it could be necessary to repeat this step after a reboot of the host. diff --git a/docs/testing/user/userguide/12-apexlake_api.rst b/docs/testing/user/userguide/12-apexlake_api.rst new file mode 100644 index 000000000..35a1dbe3e --- /dev/null +++ b/docs/testing/user/userguide/12-apexlake_api.rst @@ -0,0 +1,89 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, Intel Corporation and others. + + +================================= +Apexlake API Interface Definition +================================= + +Abstract +-------- + +The API interface provided by the framework to enable the execution of test +cases is defined as follows. + + +init +---- + +**static init()** + + Initializes the Framework + + **Returns** None + + +execute_framework +----------------- + +**static execute_framework** (test_cases, + + iterations, + + heat_template, + + heat_template_parameters, + + deployment_configuration, + + openstack_credentials) + + Executes the framework according the specified inputs + + **Parameters** + + - **test_cases** + + Test cases to be run with the workload (dict() of dict()) + + Example: + test_case = dict() + + test_case[’name’] = ‘module.Class’ + + test_case[’params’] = dict() + + test_case[’params’][’throughput’] = ‘1’ + + test_case[’params’][’vlan_sender’] = ‘1000’ + + test_case[’params’][’vlan_receiver’] = ‘1001’ + + test_cases = [test_case] + + - **iterations** + Number of test cycles to be executed (int) + + - **heat_template** + (string) File name of the heat template corresponding to the workload to be deployed. + It contains the parameters to be evaluated in the form of #parameter_name. + (See heat_templates/vTC.yaml as example). + + - **heat_template_parameters** + (dict) Parameters to be provided as input to the + heat template. See http://docs.openstack.org/developer/heat/ template_guide/hot_guide.html + section “Template input parameters” for further info. + + - **deployment_configuration** + ( dict[string] = list(strings) ) ) Dictionary of parameters + representing the deployment configuration of the workload. + + The key is a string corresponding to the name of the parameter, + the value is a list of strings representing the value to be + assumed by a specific param. The parameters are user defined: + they have to correspond to the place holders (#parameter_name) + specified in the heat template. + + **Returns** dict() containing results diff --git a/docs/testing/user/userguide/12-nsb-overview.rst b/docs/testing/user/userguide/12-nsb-overview.rst deleted file mode 100644 index faac61f08..000000000 --- a/docs/testing/user/userguide/12-nsb-overview.rst +++ /dev/null @@ -1,194 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, 2016-2017 Intel Corporation. - -===================================== -Network Services Benchmarking (NSB) -===================================== - -Abstract -======== - -.. _Yardstick: https://wiki.opnfv.org/yardstick - -This chapter provides an overview of the NSB, a contribution to OPNFV -Yardstick_ from Intel. - -Overview -======== - -GOAL: Extend Yardstick to perform real world VNFs and NFVi Characterization and -benchmarking with repeatable and deterministic methods. - -The Network Service Benchmarking (NSB) extends the yardstick framework to do -VNF characterization and benchmarking in three different execution -environments - bare metal i.e. native Linux environment, standalone virtual -environment and managed virtualized environment (e.g. Open stack etc.). -It also brings in the capability to interact with external traffic generators -both hardware & software based for triggering and validating the traffic -according to user defined profiles. - -NSB extension includes: - - - Generic data models of Network Services, based on ETSI spec (ETSI GS NFV-TST 001) - .. _ETSI GS NFV-TST 001: http://www.etsi.org/deliver/etsi_gs/NFV-TST/001_099/001/01.01.01_60/gs_nfv-tst001v010101p.pdf - - - New Standalone context for VNF testing like SRIOV, OVS, OVS-DPDK etc - - - Generic VNF configuration models and metrics implemented with Python - classes - - - Traffic generator features and traffic profiles - - - L1-L3 state-less traffic profiles - - - L4-L7 state-full traffic profiles - - - Tunneling protocol / network overlay support - - - Test case samples - - - Ping - - - Trex - - - vPE,vCGNAT, vFirewall etc - ipv4 throughput, latency etc - - - Traffic generators like Trex, ab/nginx, ixia, iperf etc - - - KPIs for a given use case: - - - System agent support for collecting NFVi KPI. This includes: - - - CPU statistic - - - Memory BW - - - OVS-DPDK Stats - - - Network KPIs, e.g., inpackets, outpackets, thoughput, latency etc - - - VNF KPIs, e.g., packet_in, packet_drop, packet_fwd etc - -Architecture -============ -The Network Service (NS) defines a set of Virtual Network Functions (VNF) -connected together using NFV infrastructure. - -The Yardstick NSB extension can support multiple VNFs created by different -vendors including traffic generators. Every VNF being tested has its -own data model. The Network service defines a VNF modelling on base of performed -network functionality. The part of the data model is a set of the configuration -parameters, number of connection points used and flavor including core and -memory amount. - -The ETSI defines a Network Service as a set of configurable VNFs working in -some NFV Infrastructure connecting each other using Virtual Links available -through Connection Points. The ETSI MANO specification defines a set of -management entities called Network Service Descriptors (NSD) and -VNF Descriptors (VNFD) that define real Network Service. The picture below -makes an example how the real Network Operator use-case can map into ETSI -Network service definition - -Network Service framework performs the necessary test steps. It may involve - - - Interacting with traffic generator and providing the inputs on traffic - type / packet structure to generate the required traffic as per the - test case. Traffic profiles will be used for this. - - - Executing the commands required for the test procedure and analyses the - command output for confirming whether the command got executed correctly - or not. E.g. As per the test case, run the traffic for the given - time period / wait for the necessary time delay - - - Verify the test result. - - - Validate the traffic flow from SUT - - - Fetch the table / data from SUT and verify the value as per the test case - - - Upload the logs from SUT onto the Test Harness server - - - Read the KPI's provided by particular VNF - -Components of Network Service ------------------------------- - -* *Models for Network Service benchmarking*: The Network Service benchmarking - requires the proper modelling approach. The NSB provides models using Python - files and defining of NSDs and VNFDs. - -The benchmark control application being a part of OPNFV yardstick can call -that python models to instantiate and configure the VNFs. Depending on -infrastructure type (bare-metal or fully virtualized) that calls could be -made directly or using MANO system. - -* *Traffic generators in NSB*: Any benchmark application requires a set of - traffic generator and traffic profiles defining the method in which traffic - is generated. - -The Network Service benchmarking model extends the Network Service -definition with a set of Traffic Generators (TG) that are treated -same way as other VNFs being a part of benchmarked network service. -Same as other VNFs the traffic generator are instantiated and terminated. - -Every traffic generator has own configuration defined as a traffic profile and -a set of KPIs supported. The python models for TG is extended by specific calls -to listen and generate traffic. - -* *The stateless TREX traffic generator*: The main traffic generator used as - Network Service stimulus is open source TREX tool. - -The TREX tool can generate any kind of stateless traffic. - -.. code-block:: console - - +--------+ +-------+ +--------+ - | | | | | | - | Trex | ---> | VNF | ---> | Trex | - | | | | | | - +--------+ +-------+ +--------+ - -Supported testcases scenarios: - - - Correlated UDP traffic using TREX traffic generator and replay VNF. - - - using different IMIX configuration like pure voice, pure video traffic etc - - - using different number IP flows like 1 flow, 1K, 16K, 64K, 256K, 1M flows - - - Using different number of rules configured like 1 rule, 1K, 10K rules - -For UDP correlated traffic following Key Performance Indicators are collected -for every combination of test case parameters: - - - RFC2544 throughput for various loss rate defined (1% is a default) - -Graphical Overview -================== - -NSB Testing with yardstick framework facilitate performance testing of various -VNFs provided. - -.. code-block:: console - - +-----------+ - | | +-----------+ - | vPE | ->|TGen Port 0| - | TestCase | | +-----------+ - | | | - +-----------+ +------------------+ +-------+ | - | | -- API --> | VNF | <---> - +-----------+ | Yardstick | +-------+ | - | Test Case | --> | NSB Testing | | - +-----------+ | | | - | | | | - | +------------------+ | - +-----------+ | +-----------+ - | Traffic | ->|TGen Port 1| - | patterns | +-----------+ - +-----------+ - - Figure 1: Network Service - 2 server configuration - diff --git a/docs/testing/user/userguide/13-nsb-overview.rst b/docs/testing/user/userguide/13-nsb-overview.rst new file mode 100644 index 000000000..faac61f08 --- /dev/null +++ b/docs/testing/user/userguide/13-nsb-overview.rst @@ -0,0 +1,194 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, 2016-2017 Intel Corporation. + +===================================== +Network Services Benchmarking (NSB) +===================================== + +Abstract +======== + +.. _Yardstick: https://wiki.opnfv.org/yardstick + +This chapter provides an overview of the NSB, a contribution to OPNFV +Yardstick_ from Intel. + +Overview +======== + +GOAL: Extend Yardstick to perform real world VNFs and NFVi Characterization and +benchmarking with repeatable and deterministic methods. + +The Network Service Benchmarking (NSB) extends the yardstick framework to do +VNF characterization and benchmarking in three different execution +environments - bare metal i.e. native Linux environment, standalone virtual +environment and managed virtualized environment (e.g. Open stack etc.). +It also brings in the capability to interact with external traffic generators +both hardware & software based for triggering and validating the traffic +according to user defined profiles. + +NSB extension includes: + + - Generic data models of Network Services, based on ETSI spec (ETSI GS NFV-TST 001) + .. _ETSI GS NFV-TST 001: http://www.etsi.org/deliver/etsi_gs/NFV-TST/001_099/001/01.01.01_60/gs_nfv-tst001v010101p.pdf + + - New Standalone context for VNF testing like SRIOV, OVS, OVS-DPDK etc + + - Generic VNF configuration models and metrics implemented with Python + classes + + - Traffic generator features and traffic profiles + + - L1-L3 state-less traffic profiles + + - L4-L7 state-full traffic profiles + + - Tunneling protocol / network overlay support + + - Test case samples + + - Ping + + - Trex + + - vPE,vCGNAT, vFirewall etc - ipv4 throughput, latency etc + + - Traffic generators like Trex, ab/nginx, ixia, iperf etc + + - KPIs for a given use case: + + - System agent support for collecting NFVi KPI. This includes: + + - CPU statistic + + - Memory BW + + - OVS-DPDK Stats + + - Network KPIs, e.g., inpackets, outpackets, thoughput, latency etc + + - VNF KPIs, e.g., packet_in, packet_drop, packet_fwd etc + +Architecture +============ +The Network Service (NS) defines a set of Virtual Network Functions (VNF) +connected together using NFV infrastructure. + +The Yardstick NSB extension can support multiple VNFs created by different +vendors including traffic generators. Every VNF being tested has its +own data model. The Network service defines a VNF modelling on base of performed +network functionality. The part of the data model is a set of the configuration +parameters, number of connection points used and flavor including core and +memory amount. + +The ETSI defines a Network Service as a set of configurable VNFs working in +some NFV Infrastructure connecting each other using Virtual Links available +through Connection Points. The ETSI MANO specification defines a set of +management entities called Network Service Descriptors (NSD) and +VNF Descriptors (VNFD) that define real Network Service. The picture below +makes an example how the real Network Operator use-case can map into ETSI +Network service definition + +Network Service framework performs the necessary test steps. It may involve + + - Interacting with traffic generator and providing the inputs on traffic + type / packet structure to generate the required traffic as per the + test case. Traffic profiles will be used for this. + + - Executing the commands required for the test procedure and analyses the + command output for confirming whether the command got executed correctly + or not. E.g. As per the test case, run the traffic for the given + time period / wait for the necessary time delay + + - Verify the test result. + + - Validate the traffic flow from SUT + + - Fetch the table / data from SUT and verify the value as per the test case + + - Upload the logs from SUT onto the Test Harness server + + - Read the KPI's provided by particular VNF + +Components of Network Service +------------------------------ + +* *Models for Network Service benchmarking*: The Network Service benchmarking + requires the proper modelling approach. The NSB provides models using Python + files and defining of NSDs and VNFDs. + +The benchmark control application being a part of OPNFV yardstick can call +that python models to instantiate and configure the VNFs. Depending on +infrastructure type (bare-metal or fully virtualized) that calls could be +made directly or using MANO system. + +* *Traffic generators in NSB*: Any benchmark application requires a set of + traffic generator and traffic profiles defining the method in which traffic + is generated. + +The Network Service benchmarking model extends the Network Service +definition with a set of Traffic Generators (TG) that are treated +same way as other VNFs being a part of benchmarked network service. +Same as other VNFs the traffic generator are instantiated and terminated. + +Every traffic generator has own configuration defined as a traffic profile and +a set of KPIs supported. The python models for TG is extended by specific calls +to listen and generate traffic. + +* *The stateless TREX traffic generator*: The main traffic generator used as + Network Service stimulus is open source TREX tool. + +The TREX tool can generate any kind of stateless traffic. + +.. code-block:: console + + +--------+ +-------+ +--------+ + | | | | | | + | Trex | ---> | VNF | ---> | Trex | + | | | | | | + +--------+ +-------+ +--------+ + +Supported testcases scenarios: + + - Correlated UDP traffic using TREX traffic generator and replay VNF. + + - using different IMIX configuration like pure voice, pure video traffic etc + + - using different number IP flows like 1 flow, 1K, 16K, 64K, 256K, 1M flows + + - Using different number of rules configured like 1 rule, 1K, 10K rules + +For UDP correlated traffic following Key Performance Indicators are collected +for every combination of test case parameters: + + - RFC2544 throughput for various loss rate defined (1% is a default) + +Graphical Overview +================== + +NSB Testing with yardstick framework facilitate performance testing of various +VNFs provided. + +.. code-block:: console + + +-----------+ + | | +-----------+ + | vPE | ->|TGen Port 0| + | TestCase | | +-----------+ + | | | + +-----------+ +------------------+ +-------+ | + | | -- API --> | VNF | <---> + +-----------+ | Yardstick | +-------+ | + | Test Case | --> | NSB Testing | | + +-----------+ | | | + | | | | + | +------------------+ | + +-----------+ | +-----------+ + | Traffic | ->|TGen Port 1| + | patterns | +-----------+ + +-----------+ + + Figure 1: Network Service - 2 server configuration + diff --git a/docs/testing/user/userguide/13-nsb_installation.rst b/docs/testing/user/userguide/13-nsb_installation.rst deleted file mode 100644 index 3eb17bbca..000000000 --- a/docs/testing/user/userguide/13-nsb_installation.rst +++ /dev/null @@ -1,238 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, 2016-2017 Intel Corporation. - -Yardstick - NSB Testing -Installation -===================================== - -Abstract --------- - -The Network Service Benchmarking (NSB) extends the yardstick framework to do -VNF characterization and benchmarking in three different execution -environments viz., bare metal i.e. native Linux environment, standalone virtual -environment and managed virtualized environment (e.g. Open stack etc.). -It also brings in the capability to interact with external traffic generators -both hardware & software based for triggering and validating the traffic -according to user defined profiles. - -The steps needed to run Yardstick with NSB testing are: - -* Install Yardstick (NSB Testing). -* Setup pod.yaml describing Test topology -* Create the test configuration yaml file. -* Run the test case. - - -Prerequisites -------------- - -Refer chapter Yardstick Instalaltion for more information on yardstick -prerequisites - -Several prerequisites are needed for Yardstick(VNF testing): - -- Python Modules: pyzmq, pika. - -- flex - -- bison - -- build-essential - -- automake - -- libtool - -- librabbitmq-dev - -- rabbitmq-server - -- collectd - -- intel-cmt-cat - -Install Yardstick (NSB Testing) -------------------------------- - -Refer chapter :doc:`04-installation` for more information on installing *Yardstick* - -After *Yardstick* is installed, executing the "nsb_setup.sh" script to setup -NSB testing. - -:: - - ./nsb_setup.sh - -It will also automatically download all the packages needed for NSB Testing setup. - -System Topology: ------------------ - -.. code-block:: console - - +----------+ +----------+ - | | | | - | | (0)----->(0) | Ping/ | - | TG1 | | vPE/ | - | | | 2Trex | - | | (1)<-----(1) | | - +----------+ +----------+ - trafficgen_1 vnf - - -OpenStack parameters and credentials ------------------------------------- - -Environment variables -^^^^^^^^^^^^^^^^^^^^^ - -Before running Yardstick (NSB Testing) it is necessary to export traffic -generator libraries. - -:: - - source ~/.bash_profile - -Config yardstick conf -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -:: - - cp ./etc/yardstick/yardstick.conf.sample /etc/yardstick/yardstick.conf - vi /etc/yardstick/yardstick.conf - -Add trex_path and bin_path in 'nsb' section. - -:: - - [DEFAULT] - debug = True - dispatcher = influxdb - - [dispatcher_influxdb] - timeout = 5 - target = http://{YOUR_IP_HERE}:8086 - db_name = yardstick - username = root - password = root - - [nsb] - trex_path=/opt/nsb_bin/trex/scripts - bin_path=/opt/nsb_bin - - -Config pod.yaml describing Topology -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -Before executing Yardstick test cases, make sure that pod.yaml reflects the -topology and update all the required fields. - -:: - - cp /etc/yardstick/nodes/pod.yaml.nsb.sample /etc/yardstick/nodes/pod.yaml - -Config pod.yaml -:: - nodes: - - - name: trafficgen_1 - role: TrafficGen - ip: 1.1.1.1 - user: root - password: r00t - interfaces: - xe0: # logical name from topology.yaml and vnfd.yaml - vpci: "0000:07:00.0" - driver: i40e # default kernel driver - dpdk_port_num: 0 - local_ip: "152.16.100.20" - netmask: "255.255.255.0" - local_mac: "00:00:00:00:00:01" - xe1: # logical name from topology.yaml and vnfd.yaml - vpci: "0000:07:00.1" - driver: i40e # default kernel driver - dpdk_port_num: 1 - local_ip: "152.16.40.20" - netmask: "255.255.255.0" - local_mac: "00:00.00:00:00:02" - - - - name: vnf - role: vnf - ip: 1.1.1.2 - user: root - password: r00t - host: 1.1.1.2 #BM - host == ip, virtualized env - Host - compute node - interfaces: - xe0: # logical name from topology.yaml and vnfd.yaml - vpci: "0000:07:00.0" - driver: i40e # default kernel driver - dpdk_port_num: 0 - local_ip: "152.16.100.19" - netmask: "255.255.255.0" - local_mac: "00:00:00:00:00:03" - - xe1: # logical name from topology.yaml and vnfd.yaml - vpci: "0000:07:00.1" - driver: i40e # default kernel driver - dpdk_port_num: 1 - local_ip: "152.16.40.19" - netmask: "255.255.255.0" - local_mac: "00:00:00:00:00:04" - routing_table: - - network: "152.16.100.20" - netmask: "255.255.255.0" - gateway: "152.16.100.20" - if: "xe0" - - network: "152.16.40.20" - netmask: "255.255.255.0" - gateway: "152.16.40.20" - if: "xe1" - nd_route_tbl: - - network: "0064:ff9b:0:0:0:0:9810:6414" - netmask: "112" - gateway: "0064:ff9b:0:0:0:0:9810:6414" - if: "xe0" - - network: "0064:ff9b:0:0:0:0:9810:2814" - netmask: "112" - gateway: "0064:ff9b:0:0:0:0:9810:2814" - if: "xe1" - -Enable yardstick virtual environment -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -Before executing yardstick test cases, make sure to activate yardstick -python virtual environment - -:: - - source /opt/nsb_bin/yardstick_venv/bin/activate - - -Run Yardstick - Network Service Testcases ------------------------------------------ - -NS testing - using NSBperf CLI -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -:: - - source /opt/nsb_setup/yardstick_venv/bin/activate - PYTHONPATH: ". ~/.bash_profile" - cd /yardstick/cmd - - Execute command: ./NSPerf.py -h - ./NSBperf.py --vnf --test - eg: ./NSBperf.py --vnf vpe --test tc_baremetal_rfc2544_ipv4_1flow_64B.yaml - -NS testing - using yardstick CLI -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -:: - - source /opt/nsb_setup/yardstick_venv/bin/activate - PYTHONPATH: ". ~/.bash_profile" - -Go to test case forlder type we want to execute. - e.g. /samples/vnf_samples/nsut// - run: yardstick --debug task start diff --git a/docs/testing/user/userguide/14-list-of-tcs.rst b/docs/testing/user/userguide/14-list-of-tcs.rst deleted file mode 100644 index 1b5806cd9..000000000 --- a/docs/testing/user/userguide/14-list-of-tcs.rst +++ /dev/null @@ -1,129 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, Ericsson AB and others. - -==================== -Yardstick Test Cases -==================== - -Abstract -======== - -This chapter lists available Yardstick test cases. -Yardstick test cases are divided in two main categories: - -* *Generic NFVI Test Cases* - Test Cases developed to realize the methodology -described in :doc:`02-methodology` - -* *OPNFV Feature Test Cases* - Test Cases developed to verify one or more -aspect of a feature delivered by an OPNFV Project, including the test cases -developed for the :term:`VTC`. - -Generic NFVI Test Case Descriptions -=================================== - -.. toctree:: - :maxdepth: 1 - - opnfv_yardstick_tc001.rst - opnfv_yardstick_tc002.rst - opnfv_yardstick_tc004.rst - opnfv_yardstick_tc005.rst - opnfv_yardstick_tc008.rst - opnfv_yardstick_tc009.rst - opnfv_yardstick_tc010.rst - opnfv_yardstick_tc011.rst - opnfv_yardstick_tc012.rst - opnfv_yardstick_tc014.rst - opnfv_yardstick_tc024.rst - opnfv_yardstick_tc037.rst - opnfv_yardstick_tc038.rst - opnfv_yardstick_tc042.rst - opnfv_yardstick_tc043.rst - opnfv_yardstick_tc044.rst - opnfv_yardstick_tc055.rst - opnfv_yardstick_tc061.rst - opnfv_yardstick_tc063.rst - opnfv_yardstick_tc069.rst - opnfv_yardstick_tc070.rst - opnfv_yardstick_tc071.rst - opnfv_yardstick_tc072.rst - opnfv_yardstick_tc073.rst - opnfv_yardstick_tc075.rst - opnfv_yardstick_tc076.rst - -OPNFV Feature Test Cases -======================== - -H A ---- - -.. toctree:: - :maxdepth: 1 - - opnfv_yardstick_tc019.rst - opnfv_yardstick_tc025.rst - opnfv_yardstick_tc045.rst - opnfv_yardstick_tc046.rst - opnfv_yardstick_tc047.rst - opnfv_yardstick_tc048.rst - opnfv_yardstick_tc049.rst - opnfv_yardstick_tc050.rst - opnfv_yardstick_tc051.rst - opnfv_yardstick_tc052.rst - opnfv_yardstick_tc053.rst - opnfv_yardstick_tc054.rst - -IPv6 ----- - -.. toctree:: - :maxdepth: 1 - - opnfv_yardstick_tc027.rst - -KVM ---- - -.. toctree:: - :maxdepth: 1 - - opnfv_yardstick_tc028.rst - -Parser ------- - -.. toctree:: - :maxdepth: 1 - - opnfv_yardstick_tc040.rst - - StorPerf ------------ - -.. toctree:: - :maxdepth: 1 - - opnfv_yardstick_tc074.rst - -virtual Traffic Classifier --------------------------- - -.. toctree:: - :maxdepth: 1 - - opnfv_yardstick_tc006.rst - opnfv_yardstick_tc007.rst - opnfv_yardstick_tc020.rst - opnfv_yardstick_tc021.rst - -Templates -========= - -.. toctree:: - :maxdepth: 1 - - testcase_description_v2_template - Yardstick_task_templates - diff --git a/docs/testing/user/userguide/14-nsb_installation.rst b/docs/testing/user/userguide/14-nsb_installation.rst new file mode 100644 index 000000000..3eb17bbca --- /dev/null +++ b/docs/testing/user/userguide/14-nsb_installation.rst @@ -0,0 +1,238 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, 2016-2017 Intel Corporation. + +Yardstick - NSB Testing -Installation +===================================== + +Abstract +-------- + +The Network Service Benchmarking (NSB) extends the yardstick framework to do +VNF characterization and benchmarking in three different execution +environments viz., bare metal i.e. native Linux environment, standalone virtual +environment and managed virtualized environment (e.g. Open stack etc.). +It also brings in the capability to interact with external traffic generators +both hardware & software based for triggering and validating the traffic +according to user defined profiles. + +The steps needed to run Yardstick with NSB testing are: + +* Install Yardstick (NSB Testing). +* Setup pod.yaml describing Test topology +* Create the test configuration yaml file. +* Run the test case. + + +Prerequisites +------------- + +Refer chapter Yardstick Instalaltion for more information on yardstick +prerequisites + +Several prerequisites are needed for Yardstick(VNF testing): + +- Python Modules: pyzmq, pika. + +- flex + +- bison + +- build-essential + +- automake + +- libtool + +- librabbitmq-dev + +- rabbitmq-server + +- collectd + +- intel-cmt-cat + +Install Yardstick (NSB Testing) +------------------------------- + +Refer chapter :doc:`04-installation` for more information on installing *Yardstick* + +After *Yardstick* is installed, executing the "nsb_setup.sh" script to setup +NSB testing. + +:: + + ./nsb_setup.sh + +It will also automatically download all the packages needed for NSB Testing setup. + +System Topology: +----------------- + +.. code-block:: console + + +----------+ +----------+ + | | | | + | | (0)----->(0) | Ping/ | + | TG1 | | vPE/ | + | | | 2Trex | + | | (1)<-----(1) | | + +----------+ +----------+ + trafficgen_1 vnf + + +OpenStack parameters and credentials +------------------------------------ + +Environment variables +^^^^^^^^^^^^^^^^^^^^^ + +Before running Yardstick (NSB Testing) it is necessary to export traffic +generator libraries. + +:: + + source ~/.bash_profile + +Config yardstick conf +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +:: + + cp ./etc/yardstick/yardstick.conf.sample /etc/yardstick/yardstick.conf + vi /etc/yardstick/yardstick.conf + +Add trex_path and bin_path in 'nsb' section. + +:: + + [DEFAULT] + debug = True + dispatcher = influxdb + + [dispatcher_influxdb] + timeout = 5 + target = http://{YOUR_IP_HERE}:8086 + db_name = yardstick + username = root + password = root + + [nsb] + trex_path=/opt/nsb_bin/trex/scripts + bin_path=/opt/nsb_bin + + +Config pod.yaml describing Topology +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Before executing Yardstick test cases, make sure that pod.yaml reflects the +topology and update all the required fields. + +:: + + cp /etc/yardstick/nodes/pod.yaml.nsb.sample /etc/yardstick/nodes/pod.yaml + +Config pod.yaml +:: + nodes: + - + name: trafficgen_1 + role: TrafficGen + ip: 1.1.1.1 + user: root + password: r00t + interfaces: + xe0: # logical name from topology.yaml and vnfd.yaml + vpci: "0000:07:00.0" + driver: i40e # default kernel driver + dpdk_port_num: 0 + local_ip: "152.16.100.20" + netmask: "255.255.255.0" + local_mac: "00:00:00:00:00:01" + xe1: # logical name from topology.yaml and vnfd.yaml + vpci: "0000:07:00.1" + driver: i40e # default kernel driver + dpdk_port_num: 1 + local_ip: "152.16.40.20" + netmask: "255.255.255.0" + local_mac: "00:00.00:00:00:02" + + - + name: vnf + role: vnf + ip: 1.1.1.2 + user: root + password: r00t + host: 1.1.1.2 #BM - host == ip, virtualized env - Host - compute node + interfaces: + xe0: # logical name from topology.yaml and vnfd.yaml + vpci: "0000:07:00.0" + driver: i40e # default kernel driver + dpdk_port_num: 0 + local_ip: "152.16.100.19" + netmask: "255.255.255.0" + local_mac: "00:00:00:00:00:03" + + xe1: # logical name from topology.yaml and vnfd.yaml + vpci: "0000:07:00.1" + driver: i40e # default kernel driver + dpdk_port_num: 1 + local_ip: "152.16.40.19" + netmask: "255.255.255.0" + local_mac: "00:00:00:00:00:04" + routing_table: + - network: "152.16.100.20" + netmask: "255.255.255.0" + gateway: "152.16.100.20" + if: "xe0" + - network: "152.16.40.20" + netmask: "255.255.255.0" + gateway: "152.16.40.20" + if: "xe1" + nd_route_tbl: + - network: "0064:ff9b:0:0:0:0:9810:6414" + netmask: "112" + gateway: "0064:ff9b:0:0:0:0:9810:6414" + if: "xe0" + - network: "0064:ff9b:0:0:0:0:9810:2814" + netmask: "112" + gateway: "0064:ff9b:0:0:0:0:9810:2814" + if: "xe1" + +Enable yardstick virtual environment +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Before executing yardstick test cases, make sure to activate yardstick +python virtual environment + +:: + + source /opt/nsb_bin/yardstick_venv/bin/activate + + +Run Yardstick - Network Service Testcases +----------------------------------------- + +NS testing - using NSBperf CLI +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +:: + + source /opt/nsb_setup/yardstick_venv/bin/activate + PYTHONPATH: ". ~/.bash_profile" + cd /yardstick/cmd + + Execute command: ./NSPerf.py -h + ./NSBperf.py --vnf --test + eg: ./NSBperf.py --vnf vpe --test tc_baremetal_rfc2544_ipv4_1flow_64B.yaml + +NS testing - using yardstick CLI +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +:: + + source /opt/nsb_setup/yardstick_venv/bin/activate + PYTHONPATH: ". ~/.bash_profile" + +Go to test case forlder type we want to execute. + e.g. /samples/vnf_samples/nsut// + run: yardstick --debug task start diff --git a/docs/testing/user/userguide/15-list-of-tcs.rst b/docs/testing/user/userguide/15-list-of-tcs.rst new file mode 100644 index 000000000..1b5806cd9 --- /dev/null +++ b/docs/testing/user/userguide/15-list-of-tcs.rst @@ -0,0 +1,129 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, Ericsson AB and others. + +==================== +Yardstick Test Cases +==================== + +Abstract +======== + +This chapter lists available Yardstick test cases. +Yardstick test cases are divided in two main categories: + +* *Generic NFVI Test Cases* - Test Cases developed to realize the methodology +described in :doc:`02-methodology` + +* *OPNFV Feature Test Cases* - Test Cases developed to verify one or more +aspect of a feature delivered by an OPNFV Project, including the test cases +developed for the :term:`VTC`. + +Generic NFVI Test Case Descriptions +=================================== + +.. toctree:: + :maxdepth: 1 + + opnfv_yardstick_tc001.rst + opnfv_yardstick_tc002.rst + opnfv_yardstick_tc004.rst + opnfv_yardstick_tc005.rst + opnfv_yardstick_tc008.rst + opnfv_yardstick_tc009.rst + opnfv_yardstick_tc010.rst + opnfv_yardstick_tc011.rst + opnfv_yardstick_tc012.rst + opnfv_yardstick_tc014.rst + opnfv_yardstick_tc024.rst + opnfv_yardstick_tc037.rst + opnfv_yardstick_tc038.rst + opnfv_yardstick_tc042.rst + opnfv_yardstick_tc043.rst + opnfv_yardstick_tc044.rst + opnfv_yardstick_tc055.rst + opnfv_yardstick_tc061.rst + opnfv_yardstick_tc063.rst + opnfv_yardstick_tc069.rst + opnfv_yardstick_tc070.rst + opnfv_yardstick_tc071.rst + opnfv_yardstick_tc072.rst + opnfv_yardstick_tc073.rst + opnfv_yardstick_tc075.rst + opnfv_yardstick_tc076.rst + +OPNFV Feature Test Cases +======================== + +H A +--- + +.. toctree:: + :maxdepth: 1 + + opnfv_yardstick_tc019.rst + opnfv_yardstick_tc025.rst + opnfv_yardstick_tc045.rst + opnfv_yardstick_tc046.rst + opnfv_yardstick_tc047.rst + opnfv_yardstick_tc048.rst + opnfv_yardstick_tc049.rst + opnfv_yardstick_tc050.rst + opnfv_yardstick_tc051.rst + opnfv_yardstick_tc052.rst + opnfv_yardstick_tc053.rst + opnfv_yardstick_tc054.rst + +IPv6 +---- + +.. toctree:: + :maxdepth: 1 + + opnfv_yardstick_tc027.rst + +KVM +--- + +.. toctree:: + :maxdepth: 1 + + opnfv_yardstick_tc028.rst + +Parser +------ + +.. toctree:: + :maxdepth: 1 + + opnfv_yardstick_tc040.rst + + StorPerf +----------- + +.. toctree:: + :maxdepth: 1 + + opnfv_yardstick_tc074.rst + +virtual Traffic Classifier +-------------------------- + +.. toctree:: + :maxdepth: 1 + + opnfv_yardstick_tc006.rst + opnfv_yardstick_tc007.rst + opnfv_yardstick_tc020.rst + opnfv_yardstick_tc021.rst + +Templates +========= + +.. toctree:: + :maxdepth: 1 + + testcase_description_v2_template + Yardstick_task_templates + diff --git a/docs/testing/user/userguide/Yardstick_user_interface.rst b/docs/testing/user/userguide/Yardstick_user_interface.rst deleted file mode 100644 index 9058dd46d..000000000 --- a/docs/testing/user/userguide/Yardstick_user_interface.rst +++ /dev/null @@ -1,29 +0,0 @@ -Yardstick User Interface -======================== - -This interface provides a user to view the test result -in table format and also values pinned on to a graph. - - -Command -------- -:: - - yardstick report generate - - -Description ------------ - -1. When the command is triggered using the task-id and the testcase -name provided the respective values are retrieved from the -database (influxdb in this particular case). - -2. The values are then formatted and then provided to the html -template framed with complete html body using Django Framework. - -3. Then the whole template is written into a html file. - -The graph is framed with Timestamp on x-axis and output values -(differ from testcase to testcase) on y-axis with the help of -"Highcharts". diff --git a/docs/testing/user/userguide/index.rst b/docs/testing/user/userguide/index.rst index f99d868e9..8ac1c7bdb 100644 --- a/docs/testing/user/userguide/index.rst +++ b/docs/testing/user/userguide/index.rst @@ -21,11 +21,12 @@ Performance Testing User Guide (Yardstick) 06-result-store-InfluxDB 07-grafana 08-api - 09-vtc-overview - 10-apexlake_installation - 11-apexlake_api - 12-nsb-overview - 13-nsb_installation - 14-list-of-tcs + 09-yardstick_user_interface + 10-vtc-overview + 11-apexlake_installation + 12-apexlake_api + 13-nsb-overview + 14-nsb_installation + 15-list-of-tcs glossary references -- cgit 1.2.3-korg