From a9184757a78ce976aa3a0e63c522c0e5ba7d1489 Mon Sep 17 00:00:00 2001 From: "Mytnyk, Volodymyr" Date: Wed, 21 Feb 2018 14:08:16 +0000 Subject: NSB userguide: run TC in heat context & sriov ports Add section that describeds steps to be able to run sample vFW TC in heat context with sriov ports confiured in the OpenStack. JIRA: YARDSTICK-1022 Change-Id: I764933e26ca7cb10aa1094901ec3304156054333 Signed-off-by: Mytnyk, Volodymyr --- .../testing/user/userguide/12-nsb_installation.rst | 289 ++++++++++++++++++++- .../code/multi-devstack-compute-local.conf | 53 ++++ .../code/multi-devstack-controller-local.conf | 64 +++++ .../user/userguide/code/single-devstack-local.conf | 62 +++++ .../user/userguide/code/single-yardstick-pod.conf | 22 ++ 5 files changed, 486 insertions(+), 4 deletions(-) create mode 100644 docs/testing/user/userguide/code/multi-devstack-compute-local.conf create mode 100644 docs/testing/user/userguide/code/multi-devstack-controller-local.conf create mode 100644 docs/testing/user/userguide/code/single-devstack-local.conf create mode 100644 docs/testing/user/userguide/code/single-yardstick-pod.conf (limited to 'docs/testing') diff --git a/docs/testing/user/userguide/12-nsb_installation.rst b/docs/testing/user/userguide/12-nsb_installation.rst index a584ca231..5631c6578 100644 --- a/docs/testing/user/userguide/12-nsb_installation.rst +++ b/docs/testing/user/userguide/12-nsb_installation.rst @@ -116,11 +116,13 @@ Configure the network proxy, either using the environment variables or setting the global environment file: .. code-block:: ini + cat /etc/environment http_proxy='http://proxy.company.com:port' https_proxy='http://proxy.company.com:port' .. code-block:: console + export http_proxy='http://proxy.company.com:port' export https_proxy='http://proxy.company.com:port' @@ -128,6 +130,7 @@ The last step is to modify the Yardstick installation inventory, used by Ansible: .. code-block:: ini + cat ./ansible/yardstick-install-inventory.ini [jumphost] localhost ansible_connection=local @@ -753,14 +756,292 @@ Update "contexts" section gateway_ip: '152.16.100.20' +Network Service Benchmarking - OpenStack with SR-IOV support +------------------------------------------------------------ + +This section describes how to run a Sample VNF test case, using Heat context, +with SR-IOV. It also covers how to install OpenStack in Ubuntu 16.04, using +DevStack, with SR-IOV support. + + +Single node OpenStack setup with external TG +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +.. code-block:: console + + +----------------------------+ + |OpenStack(DevStack) | + | | + | +--------------------+ | + | |sample-VNF VM | | + | | | | + | | DUT | | + | | (VNF) | | + | | | | + | +--------+ +--------+ | + | | VF NIC | | VF NIC | | + | +-----+--+--+----+---+ | + | ^ ^ | + | | | | + +----------+ +---------+----------+-------+ + | | | VF0 VF1 | + | | | ^ ^ | + | | | | SUT | | + | TG | (PF0)<----->(PF0) +---------+ | | + | | | | | + | | (PF1)<----->(PF1) +--------------------+ | + | | | | + +----------+ +----------------------------+ + trafficgen_1 host + + +Host pre-configuration +###################### + +.. warning:: The following configuration requires sudo access to the system. Make + sure that your user have the access. + +Enable the Intel VT-d or AMD-Vi extension in the BIOS. Some system manufacturers +disable this extension by default. + +Activate the Intel VT-d or AMD-Vi extension in the kernel by modifying the GRUB +config file ``/etc/default/grub``. + +For the Intel platform: + +.. code:: bash + + ... + GRUB_CMDLINE_LINUX_DEFAULT="intel_iommu=on" + ... + +For the AMD platform: + +.. code:: bash + + ... + GRUB_CMDLINE_LINUX_DEFAULT="amd_iommu=on" + ... + +Update the grub configuration file and restart the system: + +.. warning:: The following command will reboot the system. + +.. code:: bash + + sudo update-grub + sudo reboot + +Make sure the extension has been enabled: + +.. code:: bash + + sudo journalctl -b 0 | grep -e IOMMU -e DMAR + + Feb 06 14:50:14 hostname kernel: ACPI: DMAR 0x000000006C406000 0001E0 (v01 INTEL S2600WF 00000001 INTL 20091013) + Feb 06 14:50:14 hostname kernel: DMAR: IOMMU enabled + Feb 06 14:50:14 hostname kernel: DMAR: Host address width 46 + Feb 06 14:50:14 hostname kernel: DMAR: DRHD base: 0x000000d37fc000 flags: 0x0 + Feb 06 14:50:14 hostname kernel: DMAR: dmar0: reg_base_addr d37fc000 ver 1:0 cap 8d2078c106f0466 ecap f020de + Feb 06 14:50:14 hostname kernel: DMAR: DRHD base: 0x000000e0ffc000 flags: 0x0 + Feb 06 14:50:14 hostname kernel: DMAR: dmar1: reg_base_addr e0ffc000 ver 1:0 cap 8d2078c106f0466 ecap f020de + Feb 06 14:50:14 hostname kernel: DMAR: DRHD base: 0x000000ee7fc000 flags: 0x0 + +Setup system proxy (if needed). Add the following configuration into the +``/etc/environment`` file: + +.. note:: The proxy server name/port and IPs should be changed according to + actuall/current proxy configuration in the lab. + +.. code:: bash + + export http_proxy=http://proxy.company.com:port + export https_proxy=http://proxy.company.com:port + export ftp_proxy=http://proxy.company.com:port + export no_proxy=localhost,127.0.0.1,company.com,,,... + export NO_PROXY=localhost,127.0.0.1,company.com,,,... + +Upgrade the system: + +.. code:: bash + + sudo -EH apt-get update + sudo -EH apt-get upgrade + sudo -EH apt-get dist-upgrade + +Install dependencies needed for the DevStack + +.. code:: bash + + sudo -EH apt-get install python + sudo -EH apt-get install python-dev + sudo -EH apt-get install python-pip + +Setup SR-IOV ports on the host: + +.. note:: The ``enp24s0f0``, ``enp24s0f0`` are physical function (PF) interfaces + on a host and ``enp24s0f3`` is a public interface used in OpenStack, so the + interface names should be changed according to the HW environment used for + testing. + +.. code:: bash + + sudo ip link set dev enp24s0f0 up + sudo ip link set dev enp24s0f1 up + sudo ip link set dev enp24s0f3 up + + # Create VFs on PF + echo 2 | sudo tee /sys/class/net/enp24s0f0/device/sriov_numvfs + echo 2 | sudo tee /sys/class/net/enp24s0f1/device/sriov_numvfs + + +DevStack installation +##################### + +Use official `Devstack `_ +documentation to install OpenStack on a host. Please note, that stable +``pike`` branch of devstack repo should be used during the installation. +The required `local.conf`` configuration file are described below. + +DevStack configuration file: + +.. note:: Update the devstack configuration file by replacing angluar brackets + with a short description inside. + +.. note:: Use ``lspci | grep Ether`` & ``lspci -n | grep `` + commands to get device and vendor id of the virtual function (VF). + +.. literalinclude:: code/single-devstack-local.conf + :language: console + +Start the devstack installation on a host. + + +TG host configuration +##################### + +Yardstick automatically install and configure Trex traffic generator on TG +host based on provided POD file (see below). Anyway, it's recommended to check +the compatibility of the installed NIC on the TG server with software Trex using +the manual at https://trex-tgn.cisco.com/trex/doc/trex_manual.html. + + +Run the Sample VNF test case +############################ + +There is an example of Sample VNF test case ready to be executed in an +OpenStack environment with SR-IOV support: ``samples/vnf_samples/nsut/vfw/ +tc_heat_sriov_external_rfc2544_ipv4_1rule_1flow_64B_trex.yaml``. + +Install yardstick using `Install Yardstick (NSB Testing)`_ steps for OpenStack +context. + +Create pod file for TG in the yardstick repo folder located in the yardstick +container: + +.. note:: The ``ip``, ``user``, ``password`` and ``vpci`` fields show be changed + according to HW environment used for the testing. Use ``lshw -c network -businfo`` + command to get the PF PCI address for ``vpci`` field. + +.. literalinclude:: code/single-yardstick-pod.conf + :language: console + +Run the Sample vFW RFC2544 SR-IOV TC (``samples/vnf_samples/nsut/vfw/ +tc_heat_sriov_external_rfc2544_ipv4_1rule_1flow_64B_trex.yaml``) in the heat +context using steps described in `NS testing - using yardstick CLI`_ section. + + +Multi node OpenStack TG and VNF setup (two nodes) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +.. code-block:: console + + +----------------------------+ +----------------------------+ + |OpenStack(DevStack) | |OpenStack(DevStack) | + | | | | + | +--------------------+ | | +--------------------+ | + | |sample-VNF VM | | | |sample-VNF VM | | + | | | | | | | | + | | TG | | | | DUT | | + | | trafficgen_1 | | | | (VNF) | | + | | | | | | | | + | +--------+ +--------+ | | +--------+ +--------+ | + | | VF NIC | | VF NIC | | | | VF NIC | | VF NIC | | + | +----+---+--+----+---+ | | +-----+--+--+----+---+ | + | ^ ^ | | ^ ^ | + | | | | | | | | + +--------+-----------+-------+ +---------+----------+-------+ + | VF0 VF1 | | VF0 VF1 | + | ^ ^ | | ^ ^ | + | | SUT2 | | | | SUT1 | | + | | +-------+ (PF0)<----->(PF0) +---------+ | | + | | | | | | + | +-------------------+ (PF1)<----->(PF1) +--------------------+ | + | | | | + +----------------------------+ +----------------------------+ + host2 (compute) host1 (controller) + + +Controller/Compute pre-configuration +#################################### + +Pre-configuration of the controller and compute hosts are the same as +described in `Host pre-configuration`_ section. Follow the steps in the section. + + +DevStack configuration +###################### + +Use official `Devstack `_ +documentation to install OpenStack on a host. Please note, that stable +``pike`` branch of devstack repo should be used during the installation. +The required `local.conf`` configuration file are described below. + +.. note:: Update the devstack configuration files by replacing angluar brackets + with a short description inside. + +.. note:: Use ``lspci | grep Ether`` & ``lspci -n | grep `` + commands to get device and vendor id of the virtual function (VF). + +DevStack configuration file for controller host: + +.. literalinclude:: code/multi-devstack-controller-local.conf + :language: console + +DevStack configuration file for compute host: + +.. literalinclude:: code/multi-devstack-compute-local.conf + :language: console + +Start the devstack installation on the controller and compute hosts. + + +Run the sample vFW TC +##################### + +Install yardstick using `Install Yardstick (NSB Testing)`_ steps for OpenStack +context. + +Run sample vFW RFC2544 SR-IOV TC (``samples/vnf_samples/nsut/vfw/ +tc_heat_rfc2544_ipv4_1rule_1flow_64B_trex.yaml``) in the heat +context using steps described in `NS testing - using yardstick CLI`_ section +and the following yardtick command line arguments: + +.. code:: bash + + yardstick -d task start --task-args='{"provider": "sriov"}' \ + samples/vnf_samples/nsut/vfw/tc_heat_rfc2544_ipv4_1rule_1flow_64B_trex.yaml + + Enabling other Traffic generator -------------------------------- IxLoad: ^^^^^^^ -1. Software needed: IxLoadAPI ``Linux64.bin.tgz and Linux64.bin.tar.gz`` (Download from ixia support site) - Install - ``Linux64.bin.tgz & Linux64.bin.tar.gz`` +1. Software needed: IxLoadAPI ``Linux64.bin.tgz and Linux64.bin.tar.gz`` (Download from ixia support site) + Install - ``Linux64.bin.tgz & Linux64.bin.tar.gz`` If the installation was not done inside the container, after installing the IXIA client, check /opt/ixia/ixload//bin/ixloadpython and make sure you can run this cmd inside the yardstick container. Usually user is required to copy or link /opt/ixia/python//bin/ixiapython @@ -818,9 +1099,9 @@ IxLoad: - Connect to the IxLoad machine using RDP - Go to: - ``Start->Programs->Ixia->IxOS->IxOS 8.01-GA-Patch1->Ixia Tcl Server IxOS 8.01-GA-Patch1`` + ``Start->Programs->Ixia->IxOS->IxOS 8.01-GA-Patch1->Ixia Tcl Server IxOS 8.01-GA-Patch1`` or - ``"C:\Program Files (x86)\Ixia\IxOS\8.01-GA-Patch1\ixTclServer.exe"`` + ``"C:\Program Files (x86)\Ixia\IxOS\8.01-GA-Patch1\ixTclServer.exe"`` 4. Create a folder "Results" in c:\ and share the folder on the network. diff --git a/docs/testing/user/userguide/code/multi-devstack-compute-local.conf b/docs/testing/user/userguide/code/multi-devstack-compute-local.conf new file mode 100644 index 000000000..b0b3cc5d4 --- /dev/null +++ b/docs/testing/user/userguide/code/multi-devstack-compute-local.conf @@ -0,0 +1,53 @@ +[[local|localrc]] +HOST_IP= +MYSQL_PASSWORD=password +DATABASE_PASSWORD=password +RABBIT_PASSWORD=password +ADMIN_PASSWORD=password +SERVICE_PASSWORD=password +HORIZON_PASSWORD=password +# Controller node +SERVICE_HOST= +MYSQL_HOST=$SERVICE_HOST +RABBIT_HOST=$SERVICE_HOST +GLANCE_HOSTPORT=$SERVICE_HOST:9292 + +# Internet access. +RECLONE=False +PIP_UPGRADE=True +IP_VERSION=4 + +# Neutron +enable_plugin neutron https://git.openstack.org/openstack/neutron.git stable/pike + +# Services +ENABLED_SERVICES=n-cpu,rabbit,q-agt,placement-api,q-sriov-agt + +# Neutron Options +PUBLIC_INTERFACE= + +# ML2 Configuration +Q_PLUGIN=ml2 +Q_ML2_PLUGIN_MECHANISM_DRIVERS=openvswitch,sriovnicswitch +Q_ML2_PLUGIN_TYPE_DRIVERS=vlan,flat,local,vxlan,gre,geneve + +# Open vSwitch provider networking configuration +PHYSICAL_DEVICE_MAPPINGS=physnet1:,physnet2: + + +[[post-config|$NOVA_CONF]] +[DEFAULT] +scheduler_default_filters=RamFilter,ComputeFilter,AvailabilityZoneFilter,ComputeCapabilitiesFilter,ImagePropertiesFilter,PciPassthroughFilter +# Whitelist PCI devices +pci_passthrough_whitelist = {\\"devname\\": \\"\\", \\"physical_network\\": \\"physnet1\\" } +pci_passthrough_whitelist = {\\"devname\\": \\"\\", \\"physical_network\\": \\"physnet2\\" } + +[libvirt] +cpu_mode = host-model + + +# ML2 plugin bits for SR-IOV enablement of Intel Corporation XL710/X710 Virtual Function +[[post-config|/$Q_PLUGIN_CONF_FILE]] +[ml2_sriov] +agent_required = True +supported_pci_vendor_devs = diff --git a/docs/testing/user/userguide/code/multi-devstack-controller-local.conf b/docs/testing/user/userguide/code/multi-devstack-controller-local.conf new file mode 100644 index 000000000..fb61cdcbd --- /dev/null +++ b/docs/testing/user/userguide/code/multi-devstack-controller-local.conf @@ -0,0 +1,64 @@ +[[local|localrc]] +HOST_IP= +ADMIN_PASSWORD=password +MYSQL_PASSWORD=$ADMIN_PASSWORD +DATABASE_PASSWORD=$ADMIN_PASSWORD +RABBIT_PASSWORD=$ADMIN_PASSWORD +SERVICE_PASSWORD=$ADMIN_PASSWORD +HORIZON_PASSWORD=$ADMIN_PASSWORD +# Controller node +SERVICE_HOST=$HOST_IP +MYSQL_HOST=$SERVICE_HOST +RABBIT_HOST=$SERVICE_HOST +GLANCE_HOSTPORT=$SERVICE_HOST:9292 + +# Internet access. +RECLONE=False +PIP_UPGRADE=True +IP_VERSION=4 + +# Services +disable_service n-net +ENABLED_SERVICES+=,q-svc,q-dhcp,q-meta,q-agt,q-sriov-agt + +# Heat +enable_plugin heat https://git.openstack.org/openstack/heat stable/pike + +# Neutron +enable_plugin neutron https://git.openstack.org/openstack/neutron.git stable/pike + +# Neutron Options +FLOATING_RANGE= +Q_FLOATING_ALLOCATION_POOL=start=,end= +PUBLIC_NETWORK_GATEWAY= +PUBLIC_INTERFACE= + +# ML2 Configuration +Q_PLUGIN=ml2 +Q_ML2_PLUGIN_MECHANISM_DRIVERS=openvswitch,sriovnicswitch +Q_ML2_PLUGIN_TYPE_DRIVERS=vlan,flat,local,vxlan,gre,geneve + +# Open vSwitch provider networking configuration +Q_USE_PROVIDERNET_FOR_PUBLIC=True +OVS_PHYSICAL_BRIDGE=br-ex +OVS_BRIDGE_MAPPINGS=public:br-ex +PHYSICAL_DEVICE_MAPPINGS=physnet1:,physnet2: +PHYSICAL_NETWORK=physnet1,physnet2 + + +[[post-config|$NOVA_CONF]] +[DEFAULT] +scheduler_default_filters=RamFilter,ComputeFilter,AvailabilityZoneFilter,ComputeCapabilitiesFilter,ImagePropertiesFilter,PciPassthroughFilter +# Whitelist PCI devices +pci_passthrough_whitelist = {\\"devname\\": \\"\\", \\"physical_network\\": \\"physnet1\\" } +pci_passthrough_whitelist = {\\"devname\\": \\"\\", \\"physical_network\\": \\"physnet2\\" } + +[libvirt] +cpu_mode = host-model + + +# ML2 plugin bits for SR-IOV enablement of Intel Corporation XL710/X710 Virtual Function +[[post-config|/$Q_PLUGIN_CONF_FILE]] +[ml2_sriov] +agent_required = True +supported_pci_vendor_devs = diff --git a/docs/testing/user/userguide/code/single-devstack-local.conf b/docs/testing/user/userguide/code/single-devstack-local.conf new file mode 100644 index 000000000..4c44f729d --- /dev/null +++ b/docs/testing/user/userguide/code/single-devstack-local.conf @@ -0,0 +1,62 @@ +[[local|localrc]] +HOST_IP= +ADMIN_PASSWORD=password +MYSQL_PASSWORD=$ADMIN_PASSWORD +DATABASE_PASSWORD=$ADMIN_PASSWORD +RABBIT_PASSWORD=$ADMIN_PASSWORD +SERVICE_PASSWORD=$ADMIN_PASSWORD +HORIZON_PASSWORD=$ADMIN_PASSWORD + +# Internet access. +RECLONE=False +PIP_UPGRADE=True +IP_VERSION=4 + +# Services +disable_service n-net +ENABLED_SERVICES+=,q-svc,q-dhcp,q-meta,q-agt,q-sriov-agt + +# Heat +enable_plugin heat https://git.openstack.org/openstack/heat stable/pike + +# Neutron +enable_plugin neutron https://git.openstack.org/openstack/neutron.git stable/pike + +# Neutron Options +FLOATING_RANGE= +Q_FLOATING_ALLOCATION_POOL=start=,end= +PUBLIC_NETWORK_GATEWAY= +PUBLIC_INTERFACE= + +# ML2 Configuration +Q_PLUGIN=ml2 +Q_ML2_PLUGIN_MECHANISM_DRIVERS=openvswitch,sriovnicswitch +Q_ML2_PLUGIN_TYPE_DRIVERS=vlan,flat,local,vxlan,gre,geneve + +# Open vSwitch provider networking configuration +Q_USE_PROVIDERNET_FOR_PUBLIC=True +OVS_PHYSICAL_BRIDGE=br-ex +OVS_BRIDGE_MAPPINGS=public:br-ex +PHYSICAL_DEVICE_MAPPINGS=physnet1:,physnet2: +PHYSICAL_NETWORK=physnet1,physnet2 + + +[[post-config|$NOVA_CONF]] +[DEFAULT] +scheduler_default_filters=RamFilter,ComputeFilter,AvailabilityZoneFilter,ComputeCapabilitiesFilter,ImagePropertiesFilter,PciPassthroughFilter +# Whitelist PCI devices +pci_passthrough_whitelist = {\\"devname\\": \\"\\", \\"physical_network\\": \\"physnet1\\" } +pci_passthrough_whitelist = {\\"devname\\": \\"\\", \\"physical_network\\": \\"physnet2\\" } + +[filter_scheduler] +enabled_filters = RetryFilter,AvailabilityZoneFilter,RamFilter,DiskFilter,ComputeFilter,ComputeCapabilitiesFilter,ImagePropertiesFilter,ServerGroupAntiAffinityFilter,ServerGroupAffinityFilter,SameHostFilter + +[libvirt] +cpu_mode = host-model + + +# ML2 plugin bits for SR-IOV enablement of Intel Corporation XL710/X710 Virtual Function +[[post-config|/$Q_PLUGIN_CONF_FILE]] +[ml2_sriov] +agent_required = True +supported_pci_vendor_devs = diff --git a/docs/testing/user/userguide/code/single-yardstick-pod.conf b/docs/testing/user/userguide/code/single-yardstick-pod.conf new file mode 100644 index 000000000..421246d60 --- /dev/null +++ b/docs/testing/user/userguide/code/single-yardstick-pod.conf @@ -0,0 +1,22 @@ +nodes: +- + name: trafficgen_1 + role: tg__0 + ip: + user: + password: + interfaces: + xe0: # logical name from topology.yaml and vnfd.yaml + vpci: "0000:18:00.0" + driver: i40e # default kernel driver + dpdk_port_num: 0 + local_ip: "10.1.1.150" + netmask: "255.255.255.0" + local_mac: "00:00:00:00:00:01" + xe1: # logical name from topology.yaml and vnfd.yaml + vpci: "0000:18:00.1" + driver: i40e # default kernel driver + dpdk_port_num: 1 + local_ip: "10.1.1.151" + netmask: "255.255.255.0" + local_mac: "00:00:00:00:00:02" -- cgit 1.2.3-korg