From 5b4cee9606f26f4c208fcd1aec544ddd436b8162 Mon Sep 17 00:00:00 2001 From: Emma Foley Date: Mon, 12 Mar 2018 10:25:50 +0000 Subject: [docs] update the user guide for "yardstick-operation" * Add a new chapter: operation which shows how to use Yardstick and how to create test cases * Include details on how to reuse and keep VNFs between testcases JIRA: YARDSTICK-885 JIRA: YARDSTICK-886 Change-Id: I365152e8812427a3c54259adbc18d5ddb216d775 Signed-off-by: Emma Foley --- docs/testing/user/userguide/01-introduction.rst | 3 + docs/testing/user/userguide/05-operation.rst | 362 ++++++++++++++++++++++++ docs/testing/user/userguide/index.rst | 1 + 3 files changed, 366 insertions(+) create mode 100644 docs/testing/user/userguide/05-operation.rst (limited to 'docs/testing/user/userguide') diff --git a/docs/testing/user/userguide/01-introduction.rst b/docs/testing/user/userguide/01-introduction.rst index c0c0a0a2b..d846e759c 100755 --- a/docs/testing/user/userguide/01-introduction.rst +++ b/docs/testing/user/userguide/01-introduction.rst @@ -47,6 +47,9 @@ This document consists of the following chapters: * Chapter :doc:`04-installation` provides instructions to install *Yardstick*. +* Chapter :doc:`05-operation` provides information on how to use *Yardstick* + to run and create testcases. + * Chapter :doc:`06-yardstick-plugin` provides information on how to integrate other OPNFV testing projects into *Yardstick*. diff --git a/docs/testing/user/userguide/05-operation.rst b/docs/testing/user/userguide/05-operation.rst new file mode 100644 index 000000000..3da9fc509 --- /dev/null +++ b/docs/testing/user/userguide/05-operation.rst @@ -0,0 +1,362 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, Intel, Ericsson AB, Huawei Technologies Co. Ltd and others. + +.. + Convention for heading levels in Yardstick: + ======= Heading 0 (reserved for the title in a document) + ------- Heading 1 + ^^^^^^^ Heading 2 + +++++++ Heading 3 + ''''''' Heading 4 + Avoid deeper levels because they do not render well. + +=============== +Yardstick Usage +=============== + +Once you have yardstick installed, you can start using it to run testcases +immediately, through the CLI. You can also define and run new testcases and +test suites. This chapter details basic usage (running testcases), as well as +more advanced usage (creating your own testcases). + +Yardstick common CLI +-------------------- + +List test cases +^^^^^^^^^^^^^^^ + +``yardstick testcase list``: This command line would list all test cases in +Yardstick. It would show like below:: + + +--------------------------------------------------------------------------------------- + | Testcase Name | Description + +--------------------------------------------------------------------------------------- + | opnfv_yardstick_tc001 | Measure network throughput using pktgen + | opnfv_yardstick_tc002 | measure network latency using ping + | opnfv_yardstick_tc005 | Measure Storage IOPS, throughput and latency using fio. + ... + +--------------------------------------------------------------------------------------- + + +Show a test case config file +^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Take opnfv_yardstick_tc002 for an example. This test case measure network +latency. You just need to type in ``yardstick testcase show +opnfv_yardstick_tc002``, and the console would show the config yaml of this +test case:: + + --- + + schema: "yardstick:task:0.1" + description: > + Yardstick TC002 config file; + measure network latency using ping; + + {% set image = image or "cirros-0.3.5" %} + + {% set provider = provider or none %} + {% set physical_network = physical_network or 'physnet1' %} + {% set segmentation_id = segmentation_id or none %} + {% set packetsize = packetsize or 100 %} + + scenarios: + {% for i in range(2) %} + - + type: Ping + options: + packetsize: {{packetsize}} + host: athena.demo + target: ares.demo + + runner: + type: Duration + duration: 60 + interval: 10 + + sla: + max_rtt: 10 + action: monitor + {% endfor %} + + context: + name: demo + image: {{image}} + flavor: yardstick-flavor + user: cirros + + placement_groups: + pgrp1: + policy: "availability" + + servers: + athena: + floating_ip: true + placement: "pgrp1" + ares: + placement: "pgrp1" + + networks: + test: + cidr: '10.0.1.0/24' + {% if provider == "vlan" %} + provider: {{provider}} + physical_network: {{physical_network}} + {% if segmentation_id %} + segmentation_id: {{segmentation_id}} + {% endif %} + {% endif %} + + +Run a Yardstick test case +^^^^^^^^^^^^^^^^^^^^^^^^^ + +If you want run a test case, then you need to use ``yardstick task start +`` this command support some parameters as below: + + +---------------------+--------------------------------------------------+ + | Parameters | Detail | + +=====================+==================================================+ + | -d | show debug log of yardstick running | + | | | + +---------------------+--------------------------------------------------+ + | --task-args | If you want to customize test case parameters, | + | | use "--task-args" to pass the value. The format | + | | is a json string with parameter key-value pair. | + | | | + +---------------------+--------------------------------------------------+ + | --task-args-file | If you want to use yardstick | + | | env prepare command(or | + | | related API) to load the | + +---------------------+--------------------------------------------------+ + | --parse-only | | + | | | + | | | + +---------------------+--------------------------------------------------+ + | --output-file \ | Specify where to output the log. if not pass, | + | OUTPUT_FILE_PATH | the default value is | + | | "/tmp/yardstick/yardstick.log" | + | | | + +---------------------+--------------------------------------------------+ + | --suite \ | run a test suite, TEST_SUITE_PATH specify where | + | TEST_SUITE_PATH | the test suite locates | + | | | + +---------------------+--------------------------------------------------+ + + +Run Yardstick in a local environment +------------------------------------ + +We also have a guide about `How to run Yardstick in a local environment`_. +This work is contributed by Tapio Tallgren. + +Create a new testcase for Yardstick +----------------------------------- + +As a user, you may want to define a new testcase in addition to the ones +already available in Yardstick. This section will show you how to do this. + +Each testcase consists of two sections: + +* ``scenarios`` describes what will be done by the test +* ``context`` describes the environment in which the test will be run. + +Defining the testcase scenarios +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +TODO + +Defining the testcase context(s) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Each testcase consists of one or more contexts, which describe the environment +in which the testcase will be run. +Current available contexts are: + +* ``Dummy``: this is a no-op context, and is used when there is no environment + to set up e.g. when testing whether OpenStack services are available +* ``Node``: this context is used to perform operations on baremetal servers +* ``Heat``: uses OpenStack to provision the required hosts, networks, etc. +* ``Kubernetes``: uses Kubernetes to provision the resources required for the + test. + +Regardless of the context type, the ``context`` section of the testcase will +consist of the following:: + + context: + name: demo + type: Dummy|Node|Heat|Kubernetes + +The content of the ``context`` section will vary based on the context type. + +Dummy Context ++++++++++++++ + +No additional information is required for the Dummy context:: + + context: + name: my_context + type: Dummy + +Node Context +++++++++++++ + +TODO + +Heat Context +++++++++++++ + +In addition to ``name`` and ``type``, a Heat context requires the following +arguments: + +* ``image``: the image to be used to boot VMs +* ``flavor``: the flavor to be used for VMs in the context +* ``user``: the username for connecting into the VMs +* ``networks``: The networks to be created, networks are identified by name + + * ``name``: network name (required) + * (TODO) Any optional attributes + +* ``servers``: The servers to be created + + * ``name``: server name + * (TODO) Any optional attributes + +In addition to the required arguments, the following optional arguments can be +passed to the Heat context: + +* ``placement_groups``: + + * ``name``: the name of the placement group to be created + * ``policy``: either ``affinity`` or ``availability`` +* ``server_groups``: + + * ``name``: the name of the server group + * ``policy``: either ``affinity`` or ``anti-affinity`` + +Combining these elements together, a sample Heat context config looks like: + +.. literalinclude:: + ../../../../yardstick/tests/integration/dummy-scenario-heat-context.yaml + :start-after: --- + +Using exisiting HOT Templates +''''''''''''''''''''''''''''' + +TODO + +Kubernetes Context +++++++++++++++++++ + +TODO + +Using multiple contexts in a testcase ++++++++++++++++++++++++++++++++++++++ + +When using multiple contexts in a testcase, the ``context`` section is replaced +by a ``contexts`` section, and each context is separated with a ``-`` line:: + + contexts: + - + name: context1 + type: Heat + ... + - + name: context2 + type: Node + ... + + +Reusing a context ++++++++++++++++++ + +Typically, a context is torn down after a testcase is run, however, the user +may wish to keep an context intact after a testcase is complete. + +.. note:: + This feature has been implemented for the Heat context only + +To keep or reuse a context, the ``flags`` option must be specified: + +* ``no_setup``: skip the deploy stage, and fetch the details of a deployed + context/Heat stack. +* ``no_teardown``: skip the undeploy stage, thus keeping the stack intact for + the next test + +If either of these ``flags`` are ``True``, the context information must still +be given. By default, these flags are disabled:: + + context: + name: mycontext + type: Heat + flags: + no_setup: True + no_teardown: True + ... + +Create a test suite for Yardstick +--------------------------------- + +A test suite in Yardstick is a .yaml file which includes one or more test +cases. Yardstick is able to support running test suite task, so you can +customize your own test suite and run it in one task. + +``tests/opnfv/test_suites`` is the folder where Yardstick puts CI test suite. +A typical test suite is like below (the ``fuel_test_suite.yaml`` example):: + + --- + # Fuel integration test task suite + + schema: "yardstick:suite:0.1" + + name: "fuel_test_suite" + test_cases_dir: "samples/" + test_cases: + - + file_name: ping.yaml + - + file_name: iperf3.yaml + +As you can see, there are two test cases in the ``fuel_test_suite.yaml``. The +``schema`` and the ``name`` must be specified. The test cases should be listed +via the tag ``test_cases`` and their relative path is also marked via the tag +``test_cases_dir``. + +Yardstick test suite also supports constraints and task args for each test +case. Here is another sample (the ``os-nosdn-nofeature-ha.yaml`` example) to +show this, which is digested from one big test suite:: + + --- + + schema: "yardstick:suite:0.1" + + name: "os-nosdn-nofeature-ha" + test_cases_dir: "tests/opnfv/test_cases/" + test_cases: + - + file_name: opnfv_yardstick_tc002.yaml + - + file_name: opnfv_yardstick_tc005.yaml + - + file_name: opnfv_yardstick_tc043.yaml + constraint: + installer: compass + pod: huawei-pod1 + task_args: + huawei-pod1: '{"pod_info": "etc/yardstick/.../pod.yaml", + "host": "node4.LF","target": "node5.LF"}' + +As you can see in test case ``opnfv_yardstick_tc043.yaml``, there are two +tags, ``constraint`` and ``task_args``. ``constraint`` is to specify which +installer or pod it can be run in the CI environment. ``task_args`` is to +specify the task arguments for each pod. + +All in all, to create a test suite in Yardstick, you just need to create a +yaml file and add test cases, constraint or task arguments if necessary. + +References +---------- + +.. _`How to run Yardstick in a local environment`: https://wiki.opnfv.org/display/yardstick/How+to+run+Yardstick+in+a+local+environment diff --git a/docs/testing/user/userguide/index.rst b/docs/testing/user/userguide/index.rst index 57c6cf594..b936e723d 100644 --- a/docs/testing/user/userguide/index.rst +++ b/docs/testing/user/userguide/index.rst @@ -17,6 +17,7 @@ Yardstick User Guide 02-methodology 03-architecture 04-installation + 05-operation 06-yardstick-plugin 07-result-store-InfluxDB 08-grafana -- cgit 1.2.3-korg