diff options
Diffstat (limited to 'nsb_setup.sh')
| -rwxr-xr-x | nsb_setup.sh | 256 |
1 files changed, 30 insertions, 226 deletions
diff --git a/nsb_setup.sh b/nsb_setup.sh index c11dc1038..025b8f728 100755 --- a/nsb_setup.sh +++ b/nsb_setup.sh @@ -1,5 +1,5 @@ -#! /bin/bash -# Copyright (c) 2016-2017 Intel Corporation +#!/usr/bin/env bash +# Copyright (c) 2017 Intel Corporation. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -13,237 +13,41 @@ # See the License for the specific language governing permissions and # limitations under the License. -# -# Change to yardstick directory ( <current-dir>/.. ), and export it as REPO_DIR -# -cd "$(dirname "${BASH_SOURCE[0]}")" -export REPO_DIR=$PWD -echo "------------------------------------------------------------------------------" -echo " REPO_DIR exported as $REPO_DIR" -echo "------------------------------------------------------------------------------" - -if [ "$(whoami)" != "root" ]; then - echo "Must be root to run $0" - exit 1; -fi - -INSTALL_BIN_PATH="/opt/nsb_bin" -TREX_VERSION="v2.28" -TREX_DOWNLOAD="https://trex-tgn.cisco.com/trex/release/$TREX_VERSION.tar.gz" -DPDK_DOWNLOAD="http://dpdk.org/browse/dpdk/snapshot/dpdk-16.07.zip" -VIRTUAL_VENV="$INSTALL_BIN_PATH/yardstick_venv" - -# -# Install libs needed for NSB -# -install_libs() -{ - echo "Install libs needed to build and run NSB Testing..." - apt-get update > /dev/null 2>&1 - pkg=(git build-essential python-dev virtualenv python-virtualenv virtualenv linux-headers-$(uname -r) unzip python-pip libpcap-dev cmake) - for i in "${pkg[@]}"; do +apt-get update > /dev/null 2>&1 +pkg=(python-pip build-essential libssl-dev libffi-dev python3-dev python-dev) +for i in "${pkg[@]}"; do dpkg-query -W --showformat='${Status}\n' "${i}"|grep "install ok installed" if [ "$?" -eq "1" ]; then apt-get -y install "${i}"; fi - done - echo "Done" -} - -install_yardstick() -{ - echo "Create install directory... $INSTALL_BIN_PATH" - mkdir -p $INSTALL_BIN_PATH - echo "Install yardstick dependencies and build Yardstick in venv..." - pushd . - rm -rf $VIRTUAL_VENV - echo $VIRTUAL_VENV - virtualenv $VIRTUAL_VENV - if [ ! -f "$INSTALL_BIN_PATH/yardstick_venv/bin/activate" ]; then - echo "Installation Error. Failed to create yardstick virtual env..." - exit 1 - fi - source $VIRTUAL_VENV/bin/activate - bash ./install.sh - python setup.py install - popd - - pushd . - echo "Copying yardstick sample conf & pod file to /etc/yardstick/nodes" - mkdir -p /etc/yardstick/nodes - cp "$REPO_DIR/etc/yardstick/yardstick.conf.sample" "/etc/yardstick/yardstick.conf" - cp "$REPO_DIR/etc/yardstick/nodes/pod.yaml.nsb.sample" "/etc/yardstick/nodes/" - popd -} - -# -# Install trex for TH setup -# -install_trex() -{ - TREX_DIR=$INSTALL_BIN_PATH/trex/scripts - if [ -d "$TREX_DIR" ]; then - echo "Trex $TREX_VERSION already installed." - else - echo "Build TRex and installing Trex TG in $INSTALL_BIN_PATH/trex" - rm -rf ${TREX_DOWNLOAD##*/} - if [ ! -e ${TREX_DOWNLOAD##*/} ] ; then - wget $TREX_DOWNLOAD - fi - tar zxvf ${TREX_DOWNLOAD##*/} - pushd . - rm -rf trex - mkdir -p trex - mv $TREX_VERSION trex/scripts - rm -rf $TREX_VERSION.tar.gz - cd trex/scripts/ko/src/ - make - make install - ln -s $TREX_DIR/automation/trex_control_plane $INSTALL_BIN_PATH/trex_client - popd - fi - echo "Done." -} - -install_dpdk() -{ - if [ -d "$INSTALL_BIN_PATH/dpdk-16.07" ]; then - echo "DPDK already installed make sure.. igb_uio is loaded." - else - echo "Build DPDK 16.07..." - pushd . - rm -rf ${DPDK_DOWNLOAD##*/} - rm -rf "$REPO_DIR/dpdk-16.07/" - if [ ! -e ${DPDK_DOWNLOAD##*/} ] ; then - wget ${DPDK_DOWNLOAD} - fi - unzip -o ${DPDK_DOWNLOAD##*/} - - cd dpdk-16.07 - make config T=x86_64-native-linuxapp-gcc O=x86_64-native-linuxapp-gcc - cd x86_64-native-linuxapp-gcc - echo "Enable Port Stats..." - sed -i -e 's/CONFIG_RTE_PORT_STATS_COLLECT=n/CONFIG_RTE_PORT_STATS_COLLECT=y/g' .config - sed -i -e 's/CONFIG_RTE_PORT_PCAP=n/CONFIG_RTE_PORT_PCAP=y/g' .config - sed -i -e 's/CONFIG_RTE_TABLE_STATS_COLLECT=n/CONFIG_RTE_TABLE_STATS_COLLECT=y/g' .config - sed -i -e 's/CONFIG_RTE_PIPELINE_STATS_COLLECT=n/CONFIG_RTE_PIPELINE_STATS_COLLECT=y/g' .config - make - - echo "Load DPDK modules and setup hugepages" - modprobe uio - mkdir -p "/lib/modules/$(uname -r)/extra" - cp -r "kmod/igb_uio.ko" "/lib/modules/$(uname -r)/extra" - depmod -a - modprobe igb_uio - sh -c "echo 'uio\nigb_uio\n' > /etc/modules-load.d/nsb.conf" - - HUGEPGSZ=$(cat < /proc/meminfo | grep Hugepagesize | cut -d : -f 2 | tr -d ' ') - Pages=16 - if [[ "$HUGEPGSZ" = "2048kB" ]] ; then - Pages=16384 - fi - grep nr_hugepages /etc/sysctl.conf - if [[ "$?" -eq '1' ]] ; then - sh -c "echo 'vm.nr_hugepages=$Pages' >> /etc/sysctl.conf" - fi - echo "echo $Pages > /sys/kernel/mm/hugepages/hugepages-${HUGEPGSZ}/nr_hugepages" > .echo_tmp - echo "Reserving hugepages" - sudo sh .echo_tmp - rm -f .echo_tmp - - service procps start - echo "Creating /mnt/huge and mounting as hugetlbfs" - sudo mkdir -p /mnt/huge - - grep -s '/mnt/huge' /proc/mounts > /dev/null - if [ $? -ne 0 ] ; then - sudo mount -t hugetlbfs nodev /mnt/huge - fi - popd - mv "$REPO_DIR/dpdk-16.07" "$INSTALL_BIN_PATH" - rm dpdk-16.07.zip - fi - export RTE_SDK="$INSTALL_BIN_PATH/dpdk-16.07" - export RTE_TARGET=x86_64-native-linuxapp-gcc - - if [ ! -f "$INSTALL_BIN_PATH/vPE_vnf" ]; then - pushd . - echo "Building vPE VNF..." - cd $INSTALL_BIN_PATH/dpdk-16.07/examples/ip_pipeline/ - make clean - make - cp build/ip_pipeline $INSTALL_BIN_PATH/vPE_vnf - popd - fi - echo "Done" -} - - -push_nsb_binary() -{ - if [ ! -d "$INSTALL_BIN_PATH/trex/scripts" ]; then - cp -fr "$REPO_DIR/trex" "$INSTALL_BIN_PATH" - fi - rm -rf "$REPO_DIR/trex" +done - if [ -d "$INSTALL_BIN_PATH/trex" ]; then - echo "Setup Environment variables for Test Harness...." - PYTHONPATH="$INSTALL_BIN_PATH/trex/scripts/automation/trex_control_plane:$INSTALL_BIN_PATH/trex/scripts/automation/trex_control_plane/stl" - PY_PATH=$(grep PYTHONPATH ~/.bash_profile) - if [ "$PY_PATH" = "" ] ; then - sh -c "echo export PYTHONPATH=$PYTHONPATH >> ~/.bash_profile" > /dev/null - else - echo "Your ~/.bash_profile already contains a PYTHONPATH definition." - echo "Make sure it contains $PYTHONPATH which is required to run TRex" - fi - fi - cp "$REPO_DIR/yardstick/network_services/nfvi/collectd.sh" "$INSTALL_BIN_PATH" - cp "$REPO_DIR/yardstick/network_services/nfvi/collectd.conf" "$INSTALL_BIN_PATH" - cp "$REPO_DIR/nsb_setup.sh" "$INSTALL_BIN_PATH" - - # Get "dpdk-devbind.py" to find the ports for VNF to run - wget http://dpdk.org/browse/dpdk/plain/usertools/dpdk-devbind.py?h=v17.05 -O dpdk-devbind.py - chmod 777 dpdk-devbind.py - mv dpdk-devbind.py "$INSTALL_BIN_PATH" - ln "$INSTALL_BIN_PATH"/dpdk-devbind.py "$INSTALL_BIN_PATH"/dpdk_nic_bind.py - echo "Done" -} +pip install ansible shade docker -check_installed_files() -{ - if [ ! -f "$INSTALL_BIN_PATH/yardstick_venv/bin/activate" ]; then - echo "Installation Error. Failed to create yardstick virtual env..." - exit 1 - fi +if [ $# -eq 1 ]; then + extra_args="-e openrc_file=$1" + OPENRC=$1 + source "${OPENRC}" + CONTROLLER_IP=$(echo ${OS_AUTH_URL} | sed -ne "s/http:\/\/\(.*\):.*/\1/p") + export no_proxy="localhost,127.0.0.1,${CONTROLLER_IP},$no_proxy" +fi - if [ ! -d "$INSTALL_BIN_PATH/dpdk-16.07" ]; then - echo "Installation Error. Failed to download and install dpdk-16.07..." - exit 1 - fi +if [ "$http_proxy" != "" ] || [ "$https_proxy" != "" ]; then + extra_args="${extra_args} -e @/tmp/proxy.yml" - if [ ! -d "$INSTALL_BIN_PATH/trex" ]; then - echo "Installation Error. Failed to download and configure Trex" - exit 1 - fi + cat <<EOF > /tmp/proxy.yml +--- +proxy_env: + http_proxy: $http_proxy + https_proxy: $https_proxy + no_proxy: $no_proxy +EOF +fi - if [ ! -f "$INSTALL_BIN_PATH/vPE_vnf" ]; then - echo "Installation Error. vPE VNF not present in install dir $INSTALL_BIN_PATH" - exit 1 - fi -} +ANSIBLE_SCRIPTS="ansible" -if [ "$1" == "dpdk" ]; then - install_libs - install_dpdk -else - install_libs - install_yardstick - install_dpdk - install_trex - push_nsb_binary - check_installed_files -clear -echo "Installation completed..." -echo "Virtual Environment : $INSTALL_BIN_PATH/yardstick_venv" -echo "Please refer to Chapter 13 of the Yardstick User Guide for how to get started with VNF testing." -fi +cd ${ANSIBLE_SCRIPTS} &&\ +ansible-playbook \ + -e img_modify_playbook='ubuntu_server_cloudimg_modify_samplevnfs.yml' \ + -e YARD_IMG_ARCH='amd64' ${extra_args}\ + -i yardstick-install-inventory.ini nsb_setup.yml |