diff options
Diffstat (limited to 'docs/user_guides/framework/03-installation.rst')
| -rw-r--r-- | docs/user_guides/framework/03-installation.rst | 221 |
1 files changed, 0 insertions, 221 deletions
diff --git a/docs/user_guides/framework/03-installation.rst b/docs/user_guides/framework/03-installation.rst deleted file mode 100644 index 31f8a922e..000000000 --- a/docs/user_guides/framework/03-installation.rst +++ /dev/null @@ -1,221 +0,0 @@ -.. - TODO As things will change, then this document has to be revised before the - next release. Steps: - 1. Verify that the instructions below are correct and have not been changed. - 2. Add everything that is currently missing and should be included in this document. - 3. Make sure each title has a paragraph or an introductory sentence under it. - 4. Make sure each sentence is grammatically correct and easily understandable. - 5. Remove this comment section. - -Installation -============== - -Yardstick currently supports installation on Ubuntu 14.04 or by using a Docker -image. Detailed steps about installing Yardstick using both of these options -can be found below. - -To use Yardstick you should have access to an OpenStack environment, -with at least Nova, Neutron, Glance, Keystone and Heat installed. - -The steps needed to run Yardstick are: - -1. Install Yardstick and create the test configuration .yaml file. -2. Build a guest image and load the image into the OpenStack environment. -3. Create a Neutron external network and load OpenStack environment variables. -4. Run the test case. - - -Installing Yardstick on Ubuntu 14.04 ------------------------------------- - -.. _install-framework: - -Installing Yardstick framework -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -Install dependencies: -:: - - sudo apt-get install python-virtualenv python-dev - sudo apt-get install libffi-dev libssl-dev git - -Create a python virtual environment, source it and update setuptools: -:: - - virtualenv ~/yardstick_venv - source ~/yardstick_venv/bin/activate - easy_install -U setuptools - -Download source code and install python dependencies: -:: - - git clone https://gerrit.opnfv.org/gerrit/yardstick - cd yardstick - python setup.py install - -There is also a YouTube video, showing the above steps: - -.. image:: http://img.youtube.com/vi/4S4izNolmR0/0.jpg - :alt: http://www.youtube.com/watch?v=4S4izNolmR0 - :target: http://www.youtube.com/watch?v=4S4izNolmR0 - -Installing extra tools -^^^^^^^^^^^^^^^^^^^^^^ -yardstick-plot -"""""""""""""" -Yardstick has an internal plotting tool ``yardstick-plot``, which can be installed -using the following command: -:: - - python setup.py develop easy_install yardstick[plot] - -.. _guest-image: - -Building a guest image -^^^^^^^^^^^^^^^^^^^^^^ -Yardstick has a tool for building an Ubuntu Cloud Server image containing all -the required tools to run test cases supported by Yardstick. It is necessary to -have sudo rights to use this tool. - -This image can be built using the following command while in the directory where -Yardstick is installed (``~/yardstick`` if the framework is installed -by following the commands above): -:: - - sudo ./tools/yardstick-img-modify tools/ubuntu-server-cloudimg-modify.sh - -**Warning:** the script will create files by default in: -``/tmp/workspace/yardstick`` and the files will be owned by root! - -The created image can be added to OpenStack using the ``glance image-create`` or -via the OpenStack Dashboard. - -Example command: -:: - - glance --os-image-api-version 1 image-create \ - --name yardstick-trusty-server --is-public true \ - --disk-format qcow2 --container-format bare \ - --file /tmp/workspace/yardstick/yardstick-trusty-server.img - - -Installing Yardstick using Docker ---------------------------------- - -Yardstick has two Docker images, first one (**Yardstick-framework**) serves as a -replacement for installing the Yardstick framework in a virtual environment (for -example as done in :ref:`install-framework`), while the other image is mostly for -CI purposes (**Yardstick-CI**). - -Yardstick-framework image -^^^^^^^^^^^^^^^^^^^^^^^^^ -Download the source code: - -:: - - git clone https://gerrit.opnfv.org/gerrit/yardstick - -Build the Docker image and tag it as *yardstick-framework*: - -:: - - cd yardstick - docker build -t yardstick-framework . - -Run the Docker instance: - -:: - - docker run --name yardstick_instance -i -t yardstick-framework - -To build a guest image for Yardstick, see :ref:`guest-image`. - -Yardstick-CI image -^^^^^^^^^^^^^^^^^^ -Pull the Yardstick-CI Docker image from Docker hub: - -:: - - docker pull opnfv/yardstick-ci - -Run the Docker image: - -:: - - docker run \ - --privileged=true \ - --rm \ - -t \ - -e "INSTALLER_TYPE=${INSTALLER_TYPE}" \ - -e "INSTALLER_IP=${INSTALLER_IP}" \ - opnfv/yardstick-ci \ - run_benchmarks - -Where ``${INSTALLER_TYPE}`` can be fuel, foreman or compass and ``${INSTALLER_IP}`` -is the installer master node IP address (i.e. 10.20.0.2 is default for fuel). - -Basic steps performed by the **Yardstick-CI** container: - -1. clone yardstick and releng repos -2. setup OS credentials (releng scripts) -3. install yardstick and dependencies -4. build yardstick cloud image and upload it to glance -5. upload cirros-0.3.3 cloud image to glance -6. run yardstick test scenarios -7. cleanup - - -OpenStack parameters and credentials ------------------------------------- - -Yardstick-flavor -^^^^^^^^^^^^^^^^ -Most of the sample test cases in Yardstick are using an OpenStack flavor called -*yardstick-flavor* which deviates from the OpenStack standard m1.tiny flavor by the -disk size - instead of 1GB it has 3GB. Other parameters are the same as in m1.tiny. - -Environment variables -^^^^^^^^^^^^^^^^^^^^^ -Before running Yardstick it is necessary to export OpenStack environment variables -from the OpenStack *openrc* file (using the ``source`` command) and export the -external network name ``export EXTERNAL_NETWORK="external-network-name"``, -the default name for the external network is ``net04_ext``. - -Credential environment variables in the *openrc* file have to include at least: - -* OS_AUTH_URL -* OS_USERNAME -* OS_PASSWORD -* OS_TENANT_NAME - -Yardstick default key pair -^^^^^^^^^^^^^^^^^^^^^^^^^^ -Yardstick uses a SSH key pair to connect to the guest image. This key pair can -be found in the ``resources/files`` directory. To run the ``ping-hot.yaml`` test -sample, this key pair needs to be imported to the OpenStack environment. - - -Examples and verifying the install ----------------------------------- - -It is recommended to verify that Yardstick was installed successfully -by executing some simple commands and test samples. Below is an example invocation -of yardstick help command and ping.py test sample: -:: - - yardstick –h - yardstick task start samples/ping.yaml - -Each testing tool supported by Yardstick has a sample configuration file. -These configuration files can be found in the **samples** directory. - -Example invocation of ``yardstick-plot`` tool: -:: - - yardstick-plot -i /tmp/yardstick.out -o /tmp/plots/ - -Default location for the output is ``/tmp/yardstick.out``. - -More info about the tool can be found by executing: -:: - - yardstick-plot -h |