vFW scale-up template.

Added topology and traffic profile templates
Added support for using JinJa2 templates in topology definition
Added support for static pipeline configs for SampleVNFs

JIRA: YARDSTICK-1043

Change-Id: Iab99fd5b5ad69ca32ee70b9fe47779387ad27e7f
Signed-off-by: Chornyi, TarasX <tarasx.chornyi@intel.com>
Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>

1 files changed, 102 insertions, 0 deletions

diff --git a/samples/vnf_samples/traffic_profiles/ipv4_throughput-scale-up.yaml b/samples/vnf_samples/traffic_profiles/ipv4_throughput-scale-up.yaml
new file mode 100644
index 000000000..d2cc18c15
--- /dev/null
+++ b/samples/vnf_samples/traffic_profiles/ipv4_throughput-scale-up.yaml
@@ -0,0 +1,102 @@
+# Copyright (c) 2016-2018 Intel Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# flow definition for ACL tests - 1K flows - ipv4 only
+#
+# the number of flows defines the widest range of parameters
+# for example if srcip_range=1.0.0.1-1.0.0.255 and dst_ip_range=10.0.0.1-10.0.1.255
+# and it should define only 16 flows
+#
+# there is assumption that packets generated will have a random sequences of following addresses pairs
+# in the packets
+# 1. src=1.x.x.x(x.x.x =random from 1..255) dst=10.x.x.x (random from 1..512)
+# 2. src=1.x.x.x(x.x.x =random from 1..255) dst=10.x.x.x (random from 1..512)
+# ...
+# 512. src=1.x.x.x(x.x.x =random from 1..255) dst=10.x.x.x (random from 1..512)
+#
+# not all combination should be filled
+# Any other field with random range will be added to flow definition
+#
+# the example.yaml provides all possibilities for traffic generation
+#
+# the profile defines a public and private side to make limited traffic correlation
+# between private and public side same way as it is made by IXIA solution.
+#
+{% set vports = get(extra_args, 'vports', '2') %}
+---
+schema: "nsb:traffic_profile:0.1"
+
+# This file is a template, it will be filled with values from tc.yaml before passing to the traffic generator
+
+name: rfc2544
+description: Traffic profile to run RFC2544 latency
+traffic_profile:
+  traffic_type: RFC2544Profile # defines traffic behavior - constant or look for highest possible throughput
+  frame_rate: 100  # pc of linerate
+  # that specifies a range (e.g. ipv4 address, port)
+{% set count = 0 %}
+{% for vport in range(vports|int) %}
+uplink_{{vport}}:
+  ipv4:
+    id: {{count + 1 }}
+    outer_l2:
+      framesize:
+        64B: "{{ get(imix, 'imix.uplink.64B', '0') }}"
+        128B: "{{ get(imix, 'imix.uplink.128B', '0') }}"
+        256B: "{{ get(imix, 'imix.uplink.256B', '0') }}"
+        373b: "{{ get(imix, 'imix.uplink.373B', '0') }}"
+        512B: "{{ get(imix, 'imix.uplink.512B', '0') }}"
+        570B: "{{ get(imix, 'imix.uplink.570B', '0') }}"
+        1400B: "{{ get(imix, 'imix.uplink.1400B', '0') }}"
+        1500B: "{{ get(imix, 'imix.uplink.1500B', '0') }}"
+        1518B: "{{ get(imix, 'imix.uplink.1518B', '0') }}"
+    outer_l3v4:
+      proto: "udp"
+      srcip4: "{{ get(flow, 'flow.src_ip_{{vport}}', '1.1.1.1-1.1.255.255') }}"
+      dstip4: "{{ get(flow, 'flow.dst_ip_{{vport}}', '90.90.1.1-90.90.255.255') }}"
+      count: "{{ get(flow, 'flow.count', '1') }}"
+      ttl: 32
+      dscp: 0
+    outer_l4:
+      srcport: "{{ get(flow, 'flow.src_port_{{vport}}', '1234-4321') }}"
+      dstport: "{{ get(flow, 'flow.dst_port_{{vport}}', '2001-4001') }}"
+      count: "{{ get(flow, 'flow.count', '1') }}"
+downlink_{{vport}}:
+  ipv4:
+    id: {{count + 2}}
+    outer_l2:
+      framesize:
+        64B: "{{ get(imix, 'imix.downlink.64B', '0') }}"
+        128B: "{{ get(imix, 'imix.downlink.128B', '0') }}"
+        256B: "{{ get(imix, 'imix.downlink.256B', '0') }}"
+        373b: "{{ get(imix, 'imix.downlink.373B', '0') }}"
+        512B: "{{ get(imix, 'imix.downlink.512B', '0') }}"
+        570B: "{{ get(imix, 'imix.downlink.570B', '0') }}"
+        1400B: "{{ get(imix, 'imix.downlink.1400B', '0') }}"
+        1500B: "{{ get(imix, 'imix.downlink.1500B', '0') }}"
+        1518B: "{{ get(imix, 'imix.downlink.1518B', '0') }}"
+
+    outer_l3v4:
+      proto: "udp"
+      srcip4: "{{ get(flow, 'flow.dst_ip_{{vport}}', '90.90.1.1-90.90.255.255') }}"
+      dstip4: "{{ get(flow, 'flow.src_ip_{{vport}}', '1.1.1.1-1.1.255.255') }}"
+      count: "{{ get(flow, 'flow.count', '1') }}"
+      ttl: 32
+      dscp: 0
+    outer_l4:
+      srcport: "{{ get(flow, 'flow.dst_port_{{vport}}', '1234-4321') }}"
+      dstport: "{{ get(flow, 'flow.src_port_{{vport}}', '2001-4001') }}"
+      count: "{{ get(flow, 'flow.count', '1') }}"
+{% set count = count + 2 %}
+{% endfor %}
\ No newline at end of file