OpenStack deployment using kolla

OpenStack deployment using Kolla installer for all-in-one mode and
multinode inside VMs which are already created. Two types of OpenStack
nodes are supported as input in sample files, like
infra_deploy_two.yaml.sample: controller and compute.

JIRA: YARDSTICK-1078

Change-Id: I51616a7a17ac565a01ec6da57b589290237d18ee
Signed-off-by: Stepan Andrushko <stepanx.andrushko@intel.com>

5 files changed, 329 insertions, 0 deletions

diff --git a/ansible/roles/infra_deploy_openstack/tasks/configure_kolla.yml b/ansible/roles/infra_deploy_openstack/tasks/configure_kolla.yml
new file mode 100644
index 000000000..9713c0d1e
--- /dev/null
+++ b/ansible/roles/infra_deploy_openstack/tasks/configure_kolla.yml
@@ -0,0 +1,40 @@
+# Copyright (c) 2018 Intel Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+---
+- name: Modify globals.yml
+  replace:
+    path: /etc/kolla/globals.yml
+    regexp: "{{ item.find }}"
+    replace: "{{ item.insert_after }}"
+  with_items:
+    - { find: '^#kolla_base_distro:.*', insert_after: 'kolla_base_distro: "ubuntu"' }
+    - { find: '^#kolla_install_type:.*', insert_after: 'kolla_install_type: "source"' }
+    - { find: '^#openstack_release:.*', insert_after: 'openstack_release: "pike"' }
+    - { find: 'kolla_internal_vip_address:.*', insert_after: 'kolla_internal_vip_address: "{{ deployvm_ip }}"' }
+    - { find: '^#network_interface:.*', insert_after: 'network_interface: "{{ hostvars[ansible_host].ansible_default_ipv4.interface }}"' }
+    - { find: '^#neutron_external_interface:.*', insert_after: 'neutron_external_interface: "{{ neutron_iface }}"' }
+    - { find: '^#enable_haproxy:.*', insert_after: 'enable_haproxy: "no"'}
+    - { find: '^#enable_heat:.*' , insert_after: 'enable_heat: "yes"'}
+    - { find: '^#docker_registry:.*', insert_after: 'docker_registry: "{{ ansible_host }}:4000"' }
+
+- name: Generate multinode from inventory
+  template:
+    src: templates/multinode.j2
+    dest: "{{ git_repos_path + 'multinode' }}"
+
+- set_fact:
+    path2multinode: "{{ git_repos_path + kolla_ans_path + '/ansible/inventory/multinode' }}"
+
+- name: Append rest groups to multinode file
+  shell: line=`grep -n '\[deployment\]' {{ path2multinode }} | cut -d ':' -f1` && tail -n +$line {{ path2multinode }} >> "{{ git_repos_path + 'multinode' }}"
diff --git a/ansible/roles/infra_deploy_openstack/tasks/configure_openstack.yml b/ansible/roles/infra_deploy_openstack/tasks/configure_openstack.yml
new file mode 100644
index 000000000..3963cb64c
--- /dev/null
+++ b/ansible/roles/infra_deploy_openstack/tasks/configure_openstack.yml
@@ -0,0 +1,67 @@
+# Copyright (c) 2018 Intel Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+---
+- name: Create folders
+  file:
+    path: "{{ item }}"
+    state: directory
+  with_items:
+    - /etc/kolla/config/nova
+    - /etc/kolla/config/neutron
+
+- set_fact:
+    filter_ops: RetryFilter,AvailabilityZoneFilter,RamFilter,DiskFilter,ComputeCapabilitiesFilter,ImagePropertiesFilter,ServerGroupAntiAffinityFilter,ServerGroupAffinityFilter,SameHostFilter
+
+- name: Configure OpenStack Nova
+  copy:
+    content: |
+      [filter_scheduler]
+      enabled_filters = {{ filter_ops }}
+      [libvirt]
+      cpu_mode = host-passthrough
+    dest: /etc/kolla/config/nova.conf
+
+- name: Configure OpenStack Neutron
+  copy:
+    content: |
+      [DEFAULT]
+      service_plugins=neutron.services.l3_router.l3_router_plugin.L3RouterPlugin
+      [securitygroup]
+      firewall_driver = neutron.agent.firewall.NoopFirewallDriver
+      [ml2]
+      extension_drivers=port_security
+      [agent]
+      extensions=port_security
+    dest: /etc/kolla/config/neutron.conf
+
+- name: Configure OpenStack ml2_plugin.ini
+  copy:
+    content: |
+      [ml2]
+      tenant_network_types = vxlan
+      extension_drivers = port_security
+      type_drivers = vlan,flat,local,vxlan
+      mechanism_drivers = openvswitch
+      [ml2_type_flat]
+      flat_networks = physnet1
+      [ml2_type_vlan]
+      network_vlan_ranges = physnet1
+      [securitygroup]
+      firewall_driver = iptables_hybrid
+      [ovs]
+      datapath_type = system
+      bridge_mappings = physnet1:br-ex
+      tunnel_bridge = br-tun
+      local_ip = {{ deployvm_ip }}
+    dest: /etc/kolla/config/neutron/ml2_plugin.ini
diff --git a/ansible/roles/infra_deploy_openstack/tasks/install_kolla.yml b/ansible/roles/infra_deploy_openstack/tasks/install_kolla.yml
new file mode 100644
index 000000000..38c163c6c
--- /dev/null
+++ b/ansible/roles/infra_deploy_openstack/tasks/install_kolla.yml
@@ -0,0 +1,54 @@
+# Copyright (c) 2018 Intel Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+---
+- name: Download kolla and kolla-ansible from git repos
+  git:
+    repo: "{{ item.repo }}"
+    dest: "{{ git_repos_path + item.dir }}"
+    version: stable/pike
+  with_items:
+    - { dir: "{{ kolla_path }}", repo: 'https://git.openstack.org/openstack/kolla'}
+    - { dir: "{{ kolla_ans_path }}", repo: 'https://git.openstack.org/openstack/kolla-ansible' }
+
+- name: Copy kolla-ansible password.yml and globals.yml
+  shell: cp -r "{{ git_repos_path + kolla_ans_path + '/etc/kolla/' }}" /etc/
+
+- name: Copy kolla-ansible all-in-one, multinode
+  shell: cp * "{{ git_repos_path }}"
+  args:
+    chdir: "{{ git_repos_path + kolla_ans_path + '/ansible/inventory/' }}"
+
+- name: Install requirements
+  pip:
+    chdir: "{{ item[0] }}"
+    requirements: "{{ item[1] }}"
+  with_nested:
+    - [ "{{ git_repos_path + kolla_path }}", "{{ git_repos_path + kolla_ans_path }}" ]
+    - [ 'requirements.txt', 'test-requirements.txt' ]
+
+- name: pip install .
+  pip:
+    chdir: "{{ item }}"
+    name: '.'
+  with_items:
+    - "{{ git_repos_path + kolla_path }}"
+    -  "{{ git_repos_path + kolla_ans_path }}"
+
+- name: Run setup.py
+  shell: "python setup.py install"
+  args:
+    chdir: "{{ item }}"
+  with_items:
+    - "{{ git_repos_path + kolla_path }}"
+    -  "{{ git_repos_path + kolla_ans_path }}"
diff --git a/ansible/roles/infra_deploy_openstack/tasks/main.yml b/ansible/roles/infra_deploy_openstack/tasks/main.yml
new file mode 100644
index 000000000..ba5d5bc54
--- /dev/null
+++ b/ansible/roles/infra_deploy_openstack/tasks/main.yml
@@ -0,0 +1,125 @@
+# Copyright (c) 2018 Intel Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+---
+# This script is based on https://docs.openstack.org/kolla-ansible/pike/user/quickstart.html
+- name: Include variables
+  include_vars:
+    file: "{{ rs_file }}"
+    name: infra_deploy_vars
+
+- set_fact:
+    traffic_ip: "{{ item.interfaces[1].ip }}"
+  when: item.hostname == ansible_host
+  with_items: "{{ infra_deploy_vars.nodes }}"
+
+- name: Get neutron iface
+  set_fact:
+    neutron_iface: "{{ item }}"
+  when:
+    - hostvars[ansible_host]['ansible_' + item.replace('-', '_')].ipv4 is defined
+    - hostvars[ansible_host]['ansible_' + item.replace('-', '_')].ipv4.address is defined
+    - hostvars[ansible_host]['ansible_' + item.replace('-', '_')].ipv4.address == traffic_ip
+  with_items: "{{ hostvars[ansible_host].ansible_interfaces }}"
+
+- name: Create a registry container
+  docker_container:
+    name: registry
+    image: registry:2
+    restart_policy: always
+    ports:
+    - "4000:5000"
+
+- name: Download and install Kolla
+  include_tasks: install_kolla.yml
+
+- name: Configure Kolla
+  include_tasks: configure_kolla.yml
+
+- name: Configure Open Stack
+  include_tasks: configure_openstack.yml
+
+- name: Ramp up Open Stack
+  include_tasks: rampup_openstack.yml
+
+- name: Update admin-openrc.sh
+  lineinfile:
+    path: /etc/kolla/admin-openrc.sh
+    regexp: "{{ item.find }}"
+    line: "{{ item.add }}"
+  with_items:
+   - { find: 'EXTERNAL_NETWORK', add: 'export EXTERNAL_NETWORK=public' }
+   - { find: 'OS_AUTH_TYPE', add: 'export OS_AUTH_TYPE=password' }
+
+- name: Copy env file
+  shell: cp /etc/kolla/admin-openrc.sh /tmp/admin-openrc.yaml
+
+- name: Rework as env vars
+  replace:
+    path: /tmp/admin-openrc.yaml
+    regexp: 'export\s+(.*)=(.*)'
+    replace: '\1: \2'
+
+- name: Download OpenStack env file
+  fetch:
+    src: /tmp/admin-openrc.yaml
+    dest: /tmp/
+    flat: yes
+
+- include_vars:
+    file: /tmp/admin-openrc.yaml
+    name: ostack_env
+
+- name: Re-assign IP address
+  shell: ip address show {{ neutron_iface }} | awk '/inet/ {print $2}'
+  when: neutron_iface is defined
+  register: ip_netmask
+
+- shell: >
+    ip addr del dev {{ neutron_iface }} {{ ip_netmask.stdout }} &&
+    ip addr add dev br-ex {{ infra_deploy_vars.networks[1].host_ip }}/{{ ip_netmask.stdout_lines[0].split('/')[1] }}
+  when:
+    - neutron_iface is defined
+    - ip_netmask.stdout | length > 0
+
+- name: Create external network
+  os_network:
+    name: public
+    external: yes
+    provider_physical_network: physnet1
+    provider_network_type: flat
+  environment:
+    - no_proxy: "{{ lookup('env', 'no_proxy') + ',' + ansible_host + ',' + hostvars[ansible_host].ansible_default_ipv4.address }}"
+    - "{{ ostack_env }}"
+
+- name: Create sub-network
+  os_subnet:
+    name: public-subnet
+    network_name: public
+    cidr: "{{ ip_netmask.stdout }}"
+    allocation_pool_start: "{{ infra_deploy_vars.networks[1].dhcp_ip_start }}"
+    allocation_pool_end: "{{ infra_deploy_vars.networks[1].dhcp_ip_stop }}"
+    gateway_ip: "{{ infra_deploy_vars.networks[1].host_ip }}"
+    enable_dhcp: no
+  environment:
+    - no_proxy: "{{ lookup('env', 'no_proxy') + ',' + ansible_host + ',' + hostvars[ansible_host].ansible_default_ipv4.address }}"
+    - "{{ ostack_env }}"
+
+- name: Upload OpenStack env file to Yardstick VM
+  copy:
+    src: /etc/kolla/admin-openrc.sh
+    dest: '/tmp/admin-openrc.sh'
+    delegate_to: "{{ item }}"
+  when: "groups['yardstickG'] is defined"
+  with_items:
+    - "{{ groups['yardstickG'] }}"
diff --git a/ansible/roles/infra_deploy_openstack/tasks/rampup_openstack.yml b/ansible/roles/infra_deploy_openstack/tasks/rampup_openstack.yml
new file mode 100644
index 000000000..c75bec685
--- /dev/null
+++ b/ansible/roles/infra_deploy_openstack/tasks/rampup_openstack.yml
@@ -0,0 +1,43 @@
+# Copyright (c) 2018 Intel Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+---
+- name: Generate passwords
+  shell: kolla-genpwd
+
+- name: Generate the kolla-build.conf
+  shell: tox -e genconfig
+  args:
+    chdir: "{{ git_repos_path + kolla_path }}"
+
+- set_fact:
+    target: "{{ git_repos_path + 'all-in-one' }}"
+
+- set_fact:
+    target: "{{ git_repos_path + 'multinode' }}"
+  when: "groups['ostack'] | length > 1"
+
+- name: Run kolla-ansible precheck
+  shell: kolla-ansible prechecks -i "{{ target }}"
+
+- name: Build kolla-ansible
+  shell: kolla-build -b ubuntu -t source --profile default --tag pike --registry {{ ansible_host }}:4000 --push
+
+- name: Pull images from registry
+  shell: kolla-ansible pull -i "{{ target }}"
+
+- name: Run kolla-ansible deploy
+  shell: kolla-ansible deploy -i "{{ target }}"
+
+- name: Create an openrc file
+  shell: kolla-ansible post-deploy