# Copyright 2015-2017 Intel Corporation. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. [MASTER] # Specify a configuration file. #rcfile= # Python code to execute, usually for sys.path manipulation such as # pygtk.require(). #init-hook= # Profiled execution. profile=no # Add files or directories to the blacklist. They should be base names, not # paths. ignore=CVS,docs,conf # Pickle collected data for later comparisons. persistent=yes # List of plugins (as comma separated values of python modules names) to load, # usually to register additional checkers. load-plugins= # Use multiple processes to speed up Pylint. jobs=1 # Allow loading of arbitrary C extensions. Extensions are imported into the # active Python interpreter and may run arbitrary code. unsafe-load-any-extension=no # A comma-separated list of package or module names from where C extensions may # be loaded. Extensions are loading into the active Python interpreter and may # run arbitrary code extension-pkg-whitelist= # Allow optimization of some AST trees. This will activate a peephole AST # optimizer, which will apply various small optimizations. For instance, it can # be used to obtain the result of joining multiple strings with the addition # operator. Joining a lot of strings can lead to a maximum recursion error in # Pylint and this flag can prevent that. It has one side effect, the resulting # AST will be different than the one from reality. optimize-ast=no [MESSAGES CONTROL] # Only show warnings with the listed confidence levels. Leave empty to show # all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED confidence= # Enable the message, report, category or checker with the given id(s). You can # either give multiple identifier separated by comma (,) or put this option # multiple time. See also the "--disable" option for examples. #enable= # Disable the message, report, category or checker with the given id(s). You # can either give multiple identifiers separated by comma (,) or put this # option multiple times (only on the command line, not in the configuration # file where it should appear only once).You can also use "--disable=all" to # disable everything first and then reenable specific checks. For example, if # you want to run only the similarities checker, you can use "--disable=all # --enable=similarities". If you want to run only the classes checker, but have # no Warning level messages displayed, use"--disable=all --enable=classes # --disable=W" disable=E1602,E1603,E1601,E1606,E1607,E1604,E1605,E1608,W0401,W1604,W1605,W1606,W1607,W1601,W1602,W1603,W1622,W1623,W1620,W1621,W1608,W1609,W1624,W1625,W1618,W1626,W1627,I0021,I0020,W0704,R0903,W1613,W1638,W1611,W1610,W1617,W1616,W1615,W1614,W1630,W1619,W1632,W1635,W1634,W1637,W1636,W1639,W1612,W1628,W1633,W1629,I0011,W1640,R1705 [REPORTS] # Set the output format. Available formats are text, parseable, colorized, msvs # (visual studio) and html. You can also give a reporter class, eg # mypackage.mymodule.MyReporterClass. output-format=text # Put messages in a separate file for each module / package specified on the # command line instead of printing them on stdout. Reports (if any) will be # written in a file name "pylint_global.[txt|html]". files-output=no # Tells whether to display a full report or only the messages reports=yes # Python expression which should return a note less than 10 (10 is the highest # note). You have access to the variables errors warning, statement which # respectively contain the number of errors / warnings messages and the total # number of statements analyzed. This is used by the global evaluation report # (RP0004). evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10) # Add a comment according to your evaluation note. This is used by the global # evaluation report (RP0004). comment=no # Template used to display messages. This is a python new-style format string # used to format the message information. See doc for all details #msg-template= [BASIC] # Required attributes for module, separated by a comma required-attributes= # List of builtins function names that should not be used, separated by a comma bad-functions=filter,apply,file # Good variable names which should always be accepted, separated by a comma good-names=i,j,k,ex,Run,_ # Bad variable names which should always be refused, separated by a comma bad-names=foo,bar,baz,toto,tutu,tata # Colon-delimited sets of names that determine each other's naming style when # the name regexes allow several styles. name-group= # Include a hint for the correct naming format with invalid-name include-naming-hint=yes # Regular expression matching correct inline iteration names inlinevar-rgx=[A-Za-z_][A-Za-z0-9_]*$ # Naming hint for inline iteration names inlinevar-name-hint=[A-Za-z_][A-Za-z0-9_]*$ # Regular expression matching correct class attribute names class-attribute-rgx=([A-Za-z_][A-Za-z0-9_]{1,30}|(__.*__))$ # Naming hint for class attribute names class-attribute-name-hint=([A-Za-z_][A-Za-z0-9_]{1,30}|(__.*__))$ # Regular expression matching correct argument names argument-rgx=[a-z_][a-z0-9_]{2,30}$ # Naming hint for argument names argument-name-hint=[a-z_][a-z0-9_]{2,30}$ # Regular expression matching correct variable names variable-rgx=[a-z_][a-z0-9_]{2,30}$ # Naming hint for variable names variable-name-hint=[a-z_][a-z0-9_]{2,30}$ # Regular expression matching correct module names module-rgx=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$ # Naming hint for module names module-name-hint=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$ # Regular expression matching correct class names class-rgx=[A-Z_][a-zA-Z0-9]+$ # Naming hint for class names class-name-hint=[A-Z_][a-zA-Z0-9]+$ # Regular expression matching correct function names function-rgx=[a-z_][a-z0-9_]{2,30}$ # Naming hint for function names function-name-hint=[a-z_][a-z0-9_]{2,30}$ # Regular expression matching correct method names method-rgx=[a-z_][a-z0-9_]{2,35}$ # Naming hint for method names method-name-hint=[a-z_][a-z0-9_]{2,30}$ # Regular expression matching correct attribute names attr-rgx=[a-z_][a-z0-9_]{2,30}$ # Naming hint for attribute names attr-name-hint=[a-z_][a-z0-9_]{2,30}$ # Regular expression matching correct constant names const-rgx=(([A-Z_][A-Z0-9_]*)|(__.*__))$ # Naming hint for constant names const-name-hint=(([A-Z_][A-Z0-9_]*)|(__.*__))$ # Regular expression which should only match function or class names that do # not require a docstring. no-docstring-rgx=__.*__ # Minimum line length for functions/classes that require docstrings, shorter # ones are exempt. docstring-min-length=-1 [FORMAT] # Maximum number of characters on a single line. max-line-length=120 # Regexp for a line that is allowed to be longer than the limit. ignore-long-lines=^\s*(# )??$ # Allow the body of an if to be on the same line as the test if there is no # else. single-line-if-stmt=no # List of optional constructs for which whitespace checking is disabled no-space-check=trailing-comma,dict-separator # Maximum number of lines in a module max-module-lines=1000 # String used as indentation unit. This is usually " " (4 spaces) or "\t" (1 # tab). indent-string=' ' # Number of spaces of indent required inside a hanging or continued line. indent-after-paren=4 # Expected format of line ending, e.g. empty (any line ending), LF or CRLF. expected-line-ending-format= [LOGGING] # Logging modules to check that the string format arguments are in logging # function parameter format logging-modules=logging [MISCELLANEOUS] # List of note tags to take in consideration, separated by a comma. notes=FIXME,XXX,TODO [SIMILARITIES] # Minimum lines number of a similarity. min-similarity-lines=4 # Ignore comments when computing similarities. ignore-comments=yes # Ignore docstrings when computing similarities. ignore-docstrings=yes # Ignore imports when computing similarities. ignore-imports=no [SPELLING] # Spelling dictionary name. Available dictionaries: none. To make it working # install python-enchant package. spelling-dict= # List of comma separated words that should not be checked. spelling-ignore-words= # A path to a file that contains private dictionary; one word per line. spelling-private-dict-file= # Tells whether to store unknown words to indicated private dictionary in # --spelling-private-dict-file option instead of raising a message. spelling-store-unknown-words=no [TYPECHECK] # Tells whether missing members accessed in mixin class should be ignored. A # mixin class is detected if its name ends with "mixin" (case insensitive). ignore-mixin-members=yes # List of module names for which member attributes should not be checked # (useful for modules/projects where namespaces are manipulated during runtime # and thus existing member attributes cannot be deduced by static analysis ignored-modules= # List of classes names for which member attributes should not be checked # (useful for classes with attributes dynamically set). ignored-classes=SQLObject # When zope mode is activated, add a predefined set of Zope acquired attributes # to generated-members. zope=no # List of members which are set dynamically and missed by pylint inference # system, and so shouldn't trigger E0201 when accessed. Python regular # expressions are accepted. generated-members=REQUEST,acl_users,aq_parent [VARIABLES] # Tells whether we should check for unused import in __init__ files. init-import=no # A regular expression matching the name of dummy variables (i.e. expectedly # not used). dummy-variables-rgx=_$|dummy # List of additional names supposed to be defined in builtins. Remember that # you should avoid to define new builtins when possible. additional-builtins= # List of strings which can identify a callback function by name. A callback # name must start or end with one of those strings. callbacks=cb_,_cb [CLASSES] # List of interface methods to ignore, separated by a comma. This is used for # instance to not check methods defines in Zope's Interface base class. ignore-iface-methods=isImplementedBy,deferred,extends,names,namesAndDescriptions,queryDescriptionFor,getBases,getDescriptionFor,getDoc,getName,getTaggedValue,getTaggedValueTags,isEqualOrExtendedBy,setTaggedValue,isImplementedByInstancesOf,adaptWith,is_implemented_by # List of method names used to declare (i.e. assign) instance attributes. defining-attr-methods=__init__,__new__,setUp # List of valid names for the first argument in a class method. valid-classmethod-first-arg=cls # List of valid names for the first argument in a metaclass class method. valid-metaclass-classmethod-first-arg=mcs # List of member names, which should be excluded from the protected access # warning. exclude-protected=_asdict,_fields,_replace,_source,_make [DESIGN] # Maximum number of arguments for function / method max-args=6 # Argument names that match this expression will be ignored. Default to name # with leading underscore ignored-argument-names=_.* # Maximum number of locals for function / method body max-locals=25 # Maximum number of return / yield for function / method body max-returns=10 # Maximum number of branch for function / method body max-branches=25 # Maximum number of statements in function / method body max-statements=70 # Maximum number of parents for a class (see R0901). max-parents=7 # Maximum number of attributes for a class (see R0902). max-attributes=15 # Minimum number of public methods for a class (see R0903). min-public-methods=2 # Maximum number of public methods for a class (see R0904). max-public-methods=20 [IMPORTS] # Deprecated modules which should not be used, separated by a comma deprecated-modules=regsub,TERMIOS,Bastion,rexec # Create a graph of every (i.e. internal and external) dependencies in the # given file (report RP0402 must not be disabled) import-graph= # Create a graph of external dependencies in the given file (report RP0402 must # not be disabled) ext-import-graph= # Create a graph of internal dependencies in the given file (report RP0402 must # not be disabled) int-import-graph= [EXCEPTIONS] # Exceptions that will emit a warning when being caught. Defaults to # "Exception" overgeneral-exceptions=Exception