Getting Started with 'vsperf' ============================= Hardware Requirements --------------------- VSPERF requires one of the following traffic generators to run tests: - IXIA traffic generator (IxNetwork hardware) and a machine that runs the IXIA client software - Spirent traffic generator (TestCenter hardware chassis or TestCenter virtual in a VM) and a VM to run the Spirent Virtual Deployment Service image, formerly known as "Spirent LabServer". Both test configurations, above, also require a CentOS Linux release 7.1.1503 (Core) host. vSwitch Requirements -------------------- The vSwitch must support Open Flow 1.3 or greater. Installation ------------ Follow the `installation instructions `__ to install. IXIA Setup ---------- On the CentOS 7 system ~~~~~~~~~~~~~~~~~~~~~~ You need to install IxNetworkTclClient$(VER\_NUM)Linux.bin.tgz. On the IXIA client software system ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Find the IxNetwork TCL server app (start -> All Programs -> IXIA -> IxNetwork -> IxNetwork\_$(VER\_NUM) -> IxNetwork TCL Server) Right click on IxNetwork TCL Server, select properties - Under shortcut tab in the Target dialogue box make sure there is the argument "-tclport xxxx" where xxxx is your port number (take note of this port number you will need it for the 10\_custom.conf file). |Alt text| Hit Ok and start the TCL server application Spirent Setup ------------- Spirent installation files and instructions are available on the Spirent support website at: http://support.spirent.com Select a version of Spirent TestCenter software to utilize. This example will use Spirent TestCenter v4.57 as an example. Substitute the appropriate version in place of 'v4.57' in the examples, below. On the CentOS 7 System ~~~~~~~~~~~~~~~~~~~~~~ Download and install the following: Spirent TestCenter Application, v4.57 for 64-bit Linux Client Spirent Virtual Deployment Service (VDS) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Spirent VDS is required for both TestCenter hardware and virtual chassis in the vsperf environment. For installation, select the version that matches the Spirent TestCenter Application version. For v4.57, the matching VDS version is 1.0.55. Download either the ova (VMware) or qcow2 (QEMU) image and create a VM with it. Initialize the VM according to Spirent installation instructions. Using Spirent TestCenter Virtual (STCv) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ STCv is available in both ova (VMware) and qcow2 (QEMU) formats. For VMware, download: Spirent TestCenter Virtual Machine for VMware, v4.57 for Hypervisor - VMware ESX.ESXi Virtual test port performance is affected by the hypervisor configuration. For best practice results in deploying STCv, the following is suggested: - Create a single VM with two test ports rather than two VMs with one port each - Set STCv in DPDK mode - Give STCv 2*n + 1 cores, where n = the number of ports. For vsperf, cores = 5. - Turning off hyperthreading and pinning these cores will improve performance - Give STCv 2 GB of RAM To get the highest performance and accuracy, Spirent TestCenter hardware is recommended. vsperf can run with either stype test ports. Cloning and building src dependencies ------------------------------------- In order to run VSPERF, you will need to download DPDK and OVS. You can do this manually and build them in a preferred location, or you could use vswitchperf/src. The vswitchperf/src directory contains makefiles that will allow you to clone and build the libraries that VSPERF depends on, such as DPDK and OVS. To clone and build simply: .. code-block:: console cd src make VSPERF can be used with OVS without DPDK support. In this case you have to specify path to the kernel sources by WITH\_LINUX parameter: .. code-block:: console cd src make WITH_LINUX=/lib/modules/`uname -r`/build To build DPDK and OVS for PVP and PVVP testing with vhost_user as the guest access method, use: .. code-block:: console make VHOST_USER=y To delete a src subdirectory and its contents to allow you to re-clone simply use: .. code-block:: console make clobber Configure the ``./conf/10_custom.conf`` file -------------------------------------------- The supplied ``10_custom.conf`` file must be modified, as it contains configuration items for which there are no reasonable default values. The configuration items that can be added is not limited to the initial contents. Any configuration item mentioned in any .conf file in ``./conf`` directory can be added and that item will be overridden by the custom configuration value. Using a custom settings file ---------------------------- Alternatively a custom settings file can be passed to ``vsperf`` via the ``--conf-file`` argument. .. code-block:: console ./vsperf --conf-file ... Note that configuration passed in via the environment (``--load-env``) or via another command line argument will override both the default and your custom configuration files. This "priority hierarchy" can be described like so (1 = max priority): 1. Command line arguments 2. Environment variables 3. Configuration file(s) -------------- Executing tests --------------- Before running any tests make sure you have root permissions by adding the following line to /etc/sudoers: .. code-block:: console username ALL=(ALL) NOPASSWD: ALL username in the example above should be replaced with a real username. To list the available tests: .. code-block:: console ./vsperf --list-tests To run a group of tests, for example all tests with a name containing 'RFC2544': .. code-block:: console ./vsperf --conf-file=user_settings.py --tests="RFC2544" To run all tests: .. code-block:: console ./vsperf --conf-file=user_settings.py Some tests allow for configurable parameters, including test duration (in seconds) as well as packet sizes (in bytes). .. code:: bash ./vsperf --conf-file user_settings.py --tests RFC2544Tput --test-param "rfc2544_duration=10;packet_sizes=128" For all available options, check out the help dialog: .. code-block:: console ./vsperf --help Executing PVP and PVVP tests ---------------------------- To run tests using vhost-user as guest access method: 1. Set VHOST_METHOD and VNF of your settings file to: .. code-block:: console VHOST_METHOD='user' VNF = 'QemuDpdkVhost' 2. Recompile src for VHOST USER testing .. code-block:: console cd src make cleanse make VHOST_USER=y 3. Run test: .. code-block:: console ./vsperf --conf-file To run tests using vhost-cuse as guest access method: 1. Set VHOST_METHOD and VNF of your settings file to: .. code-block:: console VHOST_METHOD='cuse' VNF = 'QemuDpdkVhostCuse' 2. Recompile src for VHOST USER testing .. code-block:: console cd src make cleanse make VHOST_USER=n 3. Run test: .. code-block:: console ./vsperf --conf-file Executing PVP tests using Vanilla OVS ------------------------------------- To run tests using Vanilla OVS: 1. Set the following variables: .. code-block:: console VSWITCH = 'OvsVanilla' VNF = 'QemuVirtioNet' VANILLA_TGEN_PORT1_IP = n.n.n.n VANILLA_TGEN_PORT1_MAC = nn:nn:nn:nn:nn:nn VANILLA_TGEN_PORT2_IP = n.n.n.n VANILLA_TGEN_PORT2_MAC = nn:nn:nn:nn:nn:nn VANILLA_BRIDGE_IP = n.n.n.n or use --test-param ./vsperf --conf-file user_settings.py --test-param "vanilla_tgen_tx_ip=n.n.n.n; vanilla_tgen_tx_mac=nn:nn:nn:nn:nn:nn" 2. Recompile src for Vanilla OVS testing .. code-block:: console cd src make cleanse make WITH_LINUX=/lib/modules/`uname -r`/build 3. Run test: .. code-block:: console ./vsperf --conf-file Code change verification by pylint ---------------------------------- Every developer participating in VSPERF project should run pylint before his python code is submitted for review. Project specific configuration for pylint is available at 'pylint.rc'. Example of manual pylint invocation: .. code-block:: console pylint --rcfile ./pylint.rc ./vsperf GOTCHAs: -------- OVS with DPDK and QEMU ~~~~~~~~~~~~~~~~~~~~~~~ If you encounter the following error: "before (last 100 chars): '-path=/dev/hugepages,share=on: unable to map backing store for hugepages: Cannot allocate memory\r\n\r\n" with the PVP or PVVP deployment scenario, check the amount of hugepages on your system: .. code:: bash cat /proc/meminfo | grep HugePages By default the vswitchd is launched with 1Gb of memory, to change this, modify --socket-mem parameter in conf/02_vswitch.conf to allocate an appropriate amount of memory: .. code:: bash VSWITCHD_DPDK_ARGS = ['-c', '0x4', '-n', '4', '--socket-mem 1024,0'] -------------- .. |Alt text| image:: images/TCLServerProperties.png