# Copyright 2018 Intel Corporation. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # # Testcases in this files use T-Rex running in VM as a traffic generator. # # A set of options passed to the T-Rex stateless server _TREX_OPTIONS="--no-scapy-server --no-watchdog --nc" _TREX_SERVER_IP="192.168.35.2" _TREX_BRIDGE_IP="192.168.35.1" _TREX_IP_MASK="24" # Macro for initialization of T-Rex VM and execution of T-Rex server # NOTE: It is expected that T-Rex will run in the LAST VM! TREX_VM_INIT = [ # configure T-Rex ports, which will be used for traffic generation ['#trex_p1', 'vswitch', 'add_vport', 'int_br0'], ['#trex_p2', 'vswitch', 'add_vport', 'int_br0'], # configure IP access to T-Rex VM ['vswitch', 'add_switch', 'trex_br'], ['#trex_admin', 'vswitch', 'add_vport', 'trex_br'], ['#trex_spare', 'vswitch', 'add_vport', 'trex_br'], # spare to have even number of NICs ['tools', 'exec_shell', 'sudo ip addr flush dev trex_br'], ['tools', 'exec_shell', 'sudo ip addr add $_TREX_BRIDGE_IP/$_TREX_IP_MASK dev trex_br'], ['tools', 'exec_shell', 'sudo ip link set dev trex_br up'], ['vnf_trex', 'start'], ['vnf_trex', 'execute_and_wait', 'sudo ip addr flush dev eth2'], ['vnf_trex', 'execute_and_wait', 'sudo ip addr add $_TREX_SERVER_IP/$_TREX_IP_MASK dev eth2'], ['vnf_trex', 'execute_and_wait', 'sudo ip link set dev eth2 up'], # preapre system for T-Rex execution ['vnf_trex', 'execute_and_wait', 'sysctl vm.nr_hugepages=$GUEST_HUGEPAGES_NR[-1]'], ['vnf_trex', 'execute_and_wait', 'mkdir -p /dev/hugepages'], ['vnf_trex', 'execute_and_wait', 'mount -t hugetlbfs hugetlbfs /dev/hugepages'], ['vnf_trex', 'execute_and_wait', 'grep -i huge /proc/meminfo'], ['vnf_trex', 'execute_and_wait', 'iptables -F'], # configure passwordless ssh access to VM with T-Rex server ['tools', 'exec_shell', 'sshpass -p $GUEST_PASSWORD[-1] ssh-copy-id -o StrictHostKeyChecking=no $GUEST_USERNAME[-1]@$_TREX_SERVER_IP'], # prepare T-Rex configuration ['vnf_trex', 'execute_and_wait', 'echo \'- port_limit: 2\' > /etc/trex_cfg.yaml'], ['vnf_trex', 'execute_and_wait', 'echo \' version: 2\' >> /etc/trex_cfg.yaml'], ['vnf_trex', 'execute_and_wait', "echo \" interfaces: [ '$GUEST_NICS[-1][0]['pci']', '$GUEST_NICS[-1][1]['pci']' ]\" >> /etc/trex_cfg.yaml"], # execute T-Rex stateless server and wait until it is up and running ['vnf_trex', 'execute_and_wait', 'cd $TRAFFICGEN_TREX_BASE_DIR'], ['#trex_pid', 'vnf_trex', 'execute_and_wait', 'nohup sudo bash -c "./t-rex-64 -i $_TREX_OPTIONS" &', '|\[1\] (\d+)$'], ['vnf_trex', 'execute_and_wait', 'echo -ne "Starting T-Rex " ; while ! netstat -nl | grep 4501 &> /dev/null ; do echo -ne "."; sleep 1 ; done; echo', 300], ] # T-Rex VM teardown macro TREX_VM_FINIT = [ ['vnf_trex', 'execute_and_wait', 'sudo kill #STEP[trex_pid][0]'], ['vnf_trex', 'execute_and_wait', 'sudo pkill t-rex-64'], ['vnf_trex', 'stop'], ['vswitch', 'del_port', 'trex_br', '#STEP[trex_admin][0]'], ['vswitch', 'del_port', 'trex_br', '#STEP[trex_spare][0]'], ['tools', 'exec_shell', 'sudo ip link set dev trex_br down'], ['tools', 'exec_shell', 'sudo ip addr flush dev trex_br'], ['vswitch', 'del_switch', 'trex_br'], ] # Configure T-Rex loopback test, where traffic from T-Rex is forwarded back via OVS flows TREX_VM_TEST = [ ['vswitch', 'add_switch', 'int_br0'], ] + TREX_VM_INIT + [ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[trex_p1][1]', 'actions': ['output:#STEP[trex_p2][1]'], 'idle_timeout': '0'}], ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[trex_p2][1]', 'actions': ['output:#STEP[trex_p1][1]'], 'idle_timeout': '0'}], ['trafficgen', 'send_traffic', {}], ['trafficgen', 'get_results'], # cleanup ] + TREX_VM_FINIT # Configure VM2VM test, where traffic from T-Rex VM is forwarded to 2nd VM with loopback app. TREX_VM2VM_TEST = [ ['vswitch', 'add_switch', 'int_br0'], ['#vm_p1', 'vswitch', 'add_vport', 'int_br0'], ['#vm_p2', 'vswitch', 'add_vport', 'int_br0'], ['vnf', 'start'], ] + TREX_VM_INIT + [ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[trex_p1][1]', 'actions': ['output:#STEP[vm_p1][1]'], 'idle_timeout': '0'}], ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[vm_p1][1]', 'actions': ['output:#STEP[trex_p1][1]'], 'idle_timeout': '0'}], ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[trex_p2][1]', 'actions': ['output:#STEP[vm_p2][1]'], 'idle_timeout': '0'}], ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[vm_p2][1]', 'actions': ['output:#STEP[trex_p2][1]'], 'idle_timeout': '0'}], ['trafficgen', 'send_traffic', {}], ['trafficgen', 'get_results'], ['vnf', 'stop'], ['vswitch', 'dump_flows', 'int_br0'], # cleanup ] + TREX_VM_FINIT # # A set of tests with T-Rex VM as a traffic generator. # INTEGRATION_TESTS = INTEGRATION_TESTS + [ { "Name": "trex_vm_cont", "Deployment": "clean", "Description": "T-Rex VM - execute RFC2544 Continuous Stream from T-Rex VM and loop it back through Open vSwitch.", "Parameters" : { "TRAFFIC" : { "traffic_type" : "rfc2544_continuous", }, 'GUEST_LOOPBACK' : ['clean',], 'GUEST_NICS_NR' : [4], 'GUEST_SMP' : ['sockets=1,cores=3'], 'GUEST_CORE_BINDING' : [['6', '7', '8'],], 'TRAFFICGEN' : 'Trex', 'TRAFFICGEN_TREX_HOST_IP_ADDR' : _TREX_SERVER_IP, 'TRAFFICGEN_TREX_BASE_DIR' : '/root/trex/scripts/', 'TRAFFICGEN_TREX_USER' : 'root', }, "TestSteps": TREX_VM_TEST }, { "Name": "trex_vm_tput", "Deployment": "clean", "Description": "T-Rex VM - execute RFC2544 Throughput from T-Rex VM and loop it back through Open vSwitch.", "Parameters" : { "TRAFFIC" : { "traffic_type" : "rfc2544_throughput", }, 'GUEST_LOOPBACK' : ['clean',], 'GUEST_NICS_NR' : [4], 'GUEST_SMP' : ['sockets=1,cores=3'], 'GUEST_CORE_BINDING' : [['6', '7', '8'],], 'TRAFFICGEN' : 'Trex', 'TRAFFICGEN_TREX_HOST_IP_ADDR' : _TREX_SERVER_IP, 'TRAFFICGEN_TREX_BASE_DIR' : '/root/trex/scripts/', 'TRAFFICGEN_TREX_USER' : 'root', }, "TestSteps": TREX_VM_TEST }, { "Name": "trex_vm2vm_cont", "Deployment": "clean", "Description": "T-Rex VM2VM - execute RFC2544 Continuous Stream from T-Rex VM and loop it back through 2nd VM.", "Parameters" : { 'GUEST_LOOPBACK' : ['testpmd', 'clean'], 'GUEST_NICS_NR' : [2, 4], 'GUEST_SMP' : ['sockets=1,cores=2', 'sockets=1,cores=3'], 'GUEST_CORE_BINDING' : [['9', '10'],['6', '7', '8'],], 'TRAFFICGEN' : 'Trex', 'TRAFFICGEN_TREX_HOST_IP_ADDR' : _TREX_SERVER_IP, 'TRAFFICGEN_TREX_BASE_DIR' : '/root/trex/scripts/', 'TRAFFICGEN_TREX_USER' : 'root', "TRAFFIC" : { "traffic_type" : "rfc2544_continuous", }, }, "TestSteps": TREX_VM2VM_TEST, }, { "Name": "trex_vm2vm_tput", "Deployment": "clean", "Description": "T-Rex VM2VM - execute RFC2544 Throughput from T-Rex VM and loop it back through 2nd VM.", "Parameters" : { 'GUEST_LOOPBACK' : ['testpmd', 'clean'], 'GUEST_NICS_NR' : [2, 4], 'GUEST_SMP' : ['sockets=1,cores=2', 'sockets=1,cores=3'], 'GUEST_CORE_BINDING' : [['9', '10'],['6', '7', '8'],], 'TRAFFICGEN' : 'Trex', 'TRAFFICGEN_TREX_HOST_IP_ADDR' : _TREX_SERVER_IP, 'TRAFFICGEN_TREX_BASE_DIR' : '/root/trex/scripts/', 'TRAFFICGEN_TREX_USER' : 'root', "TRAFFIC" : { "traffic_type" : "rfc2544_throughput", }, }, "TestSteps": TREX_VM2VM_TEST, }, ]