# Copyright 2015 Intel Corporation.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#   http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

RTE_TARGET = '' # the relevant DPDK build target

# traffic generator to use in tests
TRAFFICGEN = 'TestCenter'
#TRAFFICGEN = 'Dummy'
#TRAFFICGEN = 'IxNet'
#TRAFFICGEN = 'Ixia'

###########################################
# Spirent TestCenter Configuration -- BEGIN
# Path to Python 2 executable
TRAFFICGEN_STC_PYTHON2_PATH = "/usr/local/bin/python2.7"
# Path to the location of the TestCenter files
TRAFFICGEN_STC_TESTCENTER_PATH = "./tools/pkt_gen/testcenter"
# Name of the TestCenter RFC2544 Tput helper python script
TRAFFICGEN_STC_RFC2544_TPUT_TEST_FILE_NAME = "testcenter-rfc2544-throughput.py"
# The address of the Spirent Lab Server to use
TRAFFICGEN_STC_LAB_SERVER_ADDR = "10.134.156.93"
# The address of the Spirent License Server in your environment
TRAFFICGEN_STC_LICENSE_SERVER_ADDR = "10.134.156.96"
# The address of the TestCenter chassis that holds the east port
TRAFFICGEN_STC_EAST_CHASSIS_ADDR = "10.134.156.70"
# The slot number of the card that holds the east port
TRAFFICGEN_STC_EAST_SLOT_NUM = "1"
# The port number on the card that holds the east port
TRAFFICGEN_STC_EAST_PORT_NUM = "1"
# The address of the TestCenter chassis that holds the west port
TRAFFICGEN_STC_WEST_CHASSIS_ADDR = "10.134.156.70"
# The slot number of the card that holds the west port
TRAFFICGEN_STC_WEST_SLOT_NUM = "1"
# The port number on the card that holds the west port
TRAFFICGEN_STC_WEST_PORT_NUM = "2"
# The friendly name to identify the Spirent Lab Server test session
TRAFFICGEN_STC_TEST_SESSION_NAME = "RFC2544 Tput"
# The directory to copy results to
TRAFFICGEN_STC_RESULTS_DIR = "./Results"
#  The prefix for the CSV results file
TRAFFICGEN_STC_CSV_RESULTS_FILE_PREFIX = "RFC2544_tput"
# The number of trials to execute during the test
TRAFFICGEN_STC_NUMBER_OF_TRIALS = "1"
# The duration of each trial executed during the test, in seconds
TRAFFICGEN_STC_TRIAL_DURATION_SEC = "60"
# The traffic pattern between endpoints, BACKBONE, MESH or PAIR
TRAFFICGEN_STC_TRAFFIC_PATTERN = "PAIR"
# The search mode used to find the throughput rate, COMBO, STEP or BINARY
TRAFFICGEN_STC_SEARCH_MODE = "BINARY"
# The learning mode used during the test, AUTO, L2_LEARNING, L3_LERNING, or NONE
TRAFFICGEN_STC_LEARNING_MODE = "AUTO"
# The minimum percent line rate that will be used during the test
TRAFFICGEN_STC_RATE_LOWER_LIMIT_PCT = "1.0"
# The maximum percent line rate that will be used during the test
TRAFFICGEN_STC_RATE_UPPER_LIMIT_PCT = "99.0"
# If SearchMode is BINARY, the percent line rate that will be used at the start of the test
TRAFFICGEN_STC_RATE_INITIAL_PCT = "99.0"
# When SearchMode is STEP, the percent increase in load per step
TRAFFICGEN_STC_RATE_STEP_PCT = "10.0"
# The minimum percentage of load adjustment between iterations
TRAFFICGEN_STC_RESOLUTION_PCT = "1.0"
# The frame size, in bytes
TRAFFICGEN_STC_FRAME_SIZE = "256"
# The maximum acceptable frame loss percent in any iteration
TRAFFICGEN_STC_ACCEPTABLE_FRAME_LOSS_PCT = "0.0"
# The address to assign to the first emulated device interface on the first east port
TRAFFICGEN_STC_EAST_INTF_ADDR = "192.85.1.3"
# The gateway address to assign to the first emulated device interface on the first east port
TRAFFICGEN_STC_EAST_INTF_GATEWAY_ADDR = "192.85.1.103"
# The address to assign to the first emulated device interface on the first west port
TRAFFICGEN_STC_WEST_INTF_ADDR = "192.85.1.103"
# The gateway address to assign to the first emulated device interface on the first west port
TRAFFICGEN_STC_WEST_INTF_GATEWAY_ADDR = "192.85.1.3"
# Print additional information to the terminal during the test
TRAFFICGEN_STC_VERBOSE = "True"
# Spirent TestCenter Configuration -- END
#########################################

# Ixia/IxNet configuration
TRAFFICGEN_IXIA_CARD = ''
TRAFFICGEN_IXIA_PORT1 = ''
TRAFFICGEN_IXIA_PORT2 = ''
TRAFFICGEN_IXIA_LIB_PATH = '/opt/ixos/lib/ixTcl1.0'
TRAFFICGEN_IXNET_LIB_PATH = '/opt/ixnet/IxTclNetwork'

# Ixia traffic generator
TRAFFICGEN_IXIA_HOST = ''      # quad dotted ip address

# host where IxNetwork GUI/daemon runs
TRAFFICGEN_IXNET_MACHINE = ''  # quad dotted ip address
TRAFFICGEN_IXNET_PORT = ''
TRAFFICGEN_IXNET_USER = ''

# paths to shared directory for IXIA_HOST and DUT (localhost)
TRAFFICGEN_IXNET_TESTER_RESULT_DIR = ''
TRAFFICGEN_IXNET_DUT_RESULT_DIR = ''

TEST_PARAMS = {'packet_sizes':'64'}