From 9b590e2282714e3b5aae26c3ac2d8c857b1ddb82 Mon Sep 17 00:00:00 2001 From: Martin Klozik Date: Fri, 2 Oct 2015 02:18:09 +0100 Subject: Enable PVP and PVVP deployments for Vanilla OVS Support for PVP and PVVP scenerios using Vanilla OVS was added. VMs are configured to forward traffic between virtual interfaces by standard linux capabilities. Traffic generator script was updated to accept MAC and IP address configuration to allow VM forwarding configuration. VSPERF-66, VSPERF-70 Change-Id: Ia70ab6be547b39928a1eae319faba779d4e29284 Signed-off-by: Martin Klozik Signed-off-by: Dino Simeon Madarang Reviewed-by: Maryam Tahhan Reviewed-by: Brian Castelli Reviewed-by: Gene Snider Reviewed-by: Al Morton Reviewed-by: Tv Rao --- vnfs/qemu/qemu_virtio_net.py | 115 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 115 insertions(+) create mode 100644 vnfs/qemu/qemu_virtio_net.py (limited to 'vnfs/qemu/qemu_virtio_net.py') diff --git a/vnfs/qemu/qemu_virtio_net.py b/vnfs/qemu/qemu_virtio_net.py new file mode 100644 index 00000000..7de5ea1c --- /dev/null +++ b/vnfs/qemu/qemu_virtio_net.py @@ -0,0 +1,115 @@ +# Copyright 2016 Intel Corporation. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Automation of QEMU hypervisor for launching virtio-net enabled guests. +""" + +import logging +from vnfs.qemu.qemu import IVnfQemu +from conf import settings as S +from conf import get_test_param +from tools import tasks + +class QemuVirtioNet(IVnfQemu): + """ + Control an instance of QEMU with virtio-net guest communication. + """ + + def __init__(self): + """ + Initialisation function. + """ + super(QemuVirtioNet, self).__init__() + self._logger = logging.getLogger(__name__) + + # insert vanilla ovs specific modules + tasks.run_task(['sudo', 'modprobe', 'vhost_net'], self._logger, + 'Loading vhost_net module...', True) + + # calculate indexes of guest devices (e.g. charx, dpdkvhostuserx) + i = self._number * 2 + if1 = str(i) + if2 = str(i + 1) + self._net1 = S.getValue('VANILLA_NIC1_NAME')[self._number] + self._net2 = S.getValue('VANILLA_NIC2_NAME')[self._number] + + self._cmd += ['-netdev', + 'type=tap,id=' + self._net1 + + ',script=no,downscript=no,' + + 'ifname=tap' + if1 + ',vhost=on', + '-device', + 'virtio-net-pci,mac=' + + S.getValue('GUEST_NET1_MAC')[self._number] + + ',netdev=' + self._net1 + ',csum=off,gso=off,' + + 'guest_tso4=off,guest_tso6=off,guest_ecn=off', + '-netdev', + 'type=tap,id=' + self._net2 + + ',script=no,downscript=no,' + + 'ifname=tap' + if2 + ',vhost=on', + '-device', + 'virtio-net-pci,mac=' + + S.getValue('GUEST_NET2_MAC')[self._number] + + ',netdev=' + self._net2 + ',csum=off,gso=off,' + + 'guest_tso4=off,guest_tso6=off,guest_ecn=off', + ] + + # helper functions + + def _config_guest_loopback(self): + """ + Configure VM to perform forwarding between NICs + """ + + # Disable services (F16) + self.execute_and_wait('systemctl stop iptables.service') + self.execute_and_wait('systemctl stop irqbalance.service') + + nic1_name = get_test_param('vanilla_nic1_name', self._net1) + self.execute('ifconfig ' + nic1_name + ' ' + + S.getValue('VANILLA_NIC1_IP_CIDR')[self._number]) + + nic2_name = get_test_param('vanilla_nic2_name', self._net2) + self.execute('ifconfig ' + nic2_name + ' ' + + S.getValue('VANILLA_NIC2_IP_CIDR')[self._number]) + + # configure linux bridge + self.execute('brctl addbr br0') + self.execute('brctl addif br0 ' + self._net1 + ' ' + self._net2) + self.execute('ifconfig br0 ' + + S.getValue('VANILLA_BRIDGE_IP')[self._number]) + + # Add the arp entries for the IXIA ports and the bridge you are using. + # Use command line values if provided. + trafficgen_mac = get_test_param('vanilla_tgen_port1_mac', + S.getValue('VANILLA_TGEN_PORT1_MAC')) + trafficgen_ip = get_test_param('vanilla_tgen_port1_ip', + S.getValue('VANILLA_TGEN_PORT1_IP')) + + self.execute('arp -s ' + trafficgen_ip + ' ' + trafficgen_mac) + + trafficgen_mac = get_test_param('vanilla_tgen_port2_mac', + S.getValue('VANILLA_TGEN_PORT2_MAC')) + trafficgen_ip = get_test_param('vanilla_tgen_port2_ip', + S.getValue('VANILLA_TGEN_PORT2_IP')) + + self.execute('arp -s ' + trafficgen_ip + ' ' + trafficgen_mac) + + # Enable forwarding + self.execute('sysctl -w net.ipv4.ip_forward=1') + + # Controls source route verification + # 0 means no source validation + self.execute('sysctl -w net.ipv4.conf.all.rp_filter=0') + self.execute('sysctl -w net.ipv4.conf.' + self._net1 + '.rp_filter=0') + self.execute('sysctl -w net.ipv4.conf.' + self._net2 + '.rp_filter=0') -- cgit 1.2.3-korg