From 8d6777df09c3dc441013a31f21cc50ab3b0f42a3 Mon Sep 17 00:00:00 2001 From: Billy O'Mahony Date: Fri, 29 May 2015 15:24:03 +0100 Subject: framework: Add reworked framework to repo This commit adds the vSwitch Integration Test Framework whose design, based off TOIT, is outlined in the HLD previously made availiable to the community for review. The design of this framework allows developers to add different implementations of components, specifically vSwitches, Traffic Generators, Metrics Collectors and VNFs, easily. The goal of this design is that all testcases should run regardless of what is "under the hood". This commit adds support for running the framework for a phy to phy RFC2544 testcase only. More testcases will be added by the community. vSwitches supported at this time: * Intel DPDK (r) accelerated OpenvSwitch Traffic Generators supported at this time: * IxNet - IxNetwork Implementation * Ixia - IxExplorer Implementation * Dummy - Manual Implementation Metrics Collectors supported at this time: * Linux Metrics No VNFs are supported at this time but the framework outlines how they should be integrated and provides APIs for them to adhere to. JIRA: VSPERF-27 Change-Id: I312e1a1199487ffee8f824be06cd97d4f793eee0 Signed-off-by: Stephen Finucane Signed-off-by: Meghan Halton Signed-off-by: Christopher Nolan Signed-off-by: Maryam Tahhan Signed-off-by: Ciara Loftus Signed-off-by: Mark Kavanagh Signed-off-by: Cian Ferriter Signed-off-by: Timo Puha Signed-off-by: Billy O'Mahony Signed-off-by: Michal Weglicki Signed-off-by: Rory Sexton Signed-off-by: Ian Stokes Signed-off-by: Kevin Traynor Signed-off-by: Dino Simeon Madarang Reviewed-by: Eugene Snider Reviewed-by: Aihua Li --- docs/NEWS.md | 27 ++++++++++++++++++ docs/installation.md | 62 +++++++++++++++++++++++++++++++++++++++++ docs/quickstart.md | 79 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 168 insertions(+) create mode 100644 docs/NEWS.md create mode 100644 docs/installation.md create mode 100644 docs/quickstart.md (limited to 'docs') diff --git a/docs/NEWS.md b/docs/NEWS.md new file mode 100644 index 00000000..3ca47d6a --- /dev/null +++ b/docs/NEWS.md @@ -0,0 +1,27 @@ +#May 2015 + +This is the initial release of a re-designed version of the software based on +community feedback. This initial release supports only the Phy2Phy deployment +scenario and the LTD.Throughput.RFC2544.PacketLossRatio test - both described +in the OPNFV vswitchperf 'CHARACTERIZE VSWITCH PERFORMANCE FOR TELCO NFV USE +CASES LEVEL TEST DESIGN'. The intention is that more test cases will follow +once the community has digested the initial release. + +## New + +* CentOS7 support + * Verified on CentOS7 + * Install & Quickstart documentation + +* Better support for mixing tests types with Deployment Scenarios +* Re-work based on community feedback of TOIT + * Framework support for other vSwitches + * Framework support for non-Ixia traffic generators + * Framework support for different VNFs +* Python3 + +## Missing + +* Report generation is currently disabled +* xmlunit output is currently disabled +* VNF support. diff --git a/docs/installation.md b/docs/installation.md new file mode 100644 index 00000000..e19d0371 --- /dev/null +++ b/docs/installation.md @@ -0,0 +1,62 @@ +# Installing toit + +The test suite requires Python 3.3 and relies on a number of other packages. These need to be installed for the test suite to function. +To install Python 3.3 in CentOS 7, an additional repository, Software Collections (see https://www.softwarecollections.org/en/scls/rhscl/python33) +should be enabled. + +Install the requirements as specified below. + +--- +## Enable Software Collections (SCL) + +```bash +yum -y install scl-utils +yum -y install https://www.softwarecollections.org/en/scls/rhscl/python33/epel-7-x86_64/download/rhscl-python33-epel-7-x86_64.noarch.rpm +``` + +## System packages + +There are a number of packages that must be installed using `yum`. These can be installed like so: + +```bash +yum -y --exclude=python33-mod_wsgi* install python33-* pciutils +``` + +--- + +## Python 3 Packages + +To avoid file permission errors and Python version issues, use virtualenv to create an isolated environment with Python3. +The required Python 3 packages can be found in the `requirements.txt` file in the root of the test suite. +They can be installed in your virtual environment like so: + +```bash +scl enable python33 bash +# Create virtual environment +virtualenv vsperfenv +cd vsperfenv +source bin/activate +pip install -r requirements.txt +``` + +You need to activate the virtual environment everytime you start a new shell session. +To activate, simple run: + +```bash +scl enable python33 bash +cd vsperfenv +source bin/activate +``` + +--- + +# Working Behind a Proxy + +If you're behind a proxy, you'll likely want to configure this before running any of the above. For example: + +```bash +export http_proxy=proxy.mycompany.com:123 +export https_proxy=proxy.mycompany.com:123 +``` + +--- diff --git a/docs/quickstart.md b/docs/quickstart.md new file mode 100644 index 00000000..5d71c77a --- /dev/null +++ b/docs/quickstart.md @@ -0,0 +1,79 @@ +# Getting Started with 'vsperf' + +## Installation + +Follow the [installation instructions] to install. + +--- + +## Configure the `./conf/10_custom.conf` file + +The supplied `10_custom.conf` file must be modified, as it contains +configuration items for which there are no reasonable default values. + +The configuration items that can be added is not limited to the initial +contents. Any configuration item mentioned in any .conf file in `./conf` +directory can be added and that item will be overridden by the custom +configuration value. + + +## Using a custom settings file + +Alternatively a custom settings file can be passed to `vsperf` via the +`--conf-file` argument. + +```bash +./vsperf --conf-file ... +``` + +Note that configuration passed in via the environment (`--load-env`) or via +another command line argument will override both the default and your custom +configuration files. This "priority hierarchy" can be described like so (1 = +max priority): + +1. Command line arguments +2. Environment variables +3. Configuration file(s) + +--- + +## Executing tests + +To list the available tests: + +```bash +./vsperf --list-tests +``` + +To run a group of tests, for example all tests with a name containing +'RFC2544': + +```bash +./vsperf --conf-file=user_settings.py --tests="RFC2544" +``` + +To run all tests: + +```bash +./vsperf --conf-file=user_settings.py +``` + +Some tests allow for configurable parameters, including test duration (in +seconds) as well as packet sizes (in bytes). + +```bash +./vsperf --conf-file user_settings.py + --tests RFC2544Tput + --test-param "rfc2544_duration=10;packet_sizes=128" +``` + +For all available options, check out the help dialog: + +```bash +./vsperf --help +``` + +--- + +[installation instructions]: installation.md + -- cgit 1.2.3-korg