From d94018cc7be0298eaa00799245b70dec2bcd8e0c Mon Sep 17 00:00:00 2001 From: ChristopherPrice Date: Tue, 16 Feb 2016 10:41:19 +0100 Subject: Altering the filename for autogeneration Updated the heading and moved to a new filename for composite docs. Added a link to the vsp userguide at the end of the doc. Change-Id: I416228be9347275bcd4c90e394678e4eb93198d4 Signed-off-by: ChristopherPrice --- docs/userguide/index.rst | 2 +- docs/userguide/quickstart.rst | 463 ----------------------------------------- docs/userguide/testusage.rst | 468 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 469 insertions(+), 464 deletions(-) delete mode 100755 docs/userguide/quickstart.rst create mode 100755 docs/userguide/testusage.rst (limited to 'docs') diff --git a/docs/userguide/index.rst b/docs/userguide/index.rst index db0e772c..591a1211 100644 --- a/docs/userguide/index.rst +++ b/docs/userguide/index.rst @@ -10,5 +10,5 @@ VSPERF User Guide :numbered: :maxdepth: 3 - quickstart.rst + testusage.rst integration.rst diff --git a/docs/userguide/quickstart.rst b/docs/userguide/quickstart.rst deleted file mode 100755 index e7f4c142..00000000 --- a/docs/userguide/quickstart.rst +++ /dev/null @@ -1,463 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, Intel Corporation, AT&T and others. - -============================= -Getting Started with 'vsperf' -============================= - -General -------- - -VSPERF requires a traffic generators to run tests, automated traffic gen -support in VSPERF includes: - -- IXIA traffic generator (IxNetwork hardware) and a machine that runs the IXIA - client software. -- Spirent traffic generator (TestCenter hardware chassis or TestCenter virtual - in a VM) and a VM to run the Spirent Virtual Deployment Service image, - formerly known as "Spirent LabServer". - -If you want to use another traffic generator, please select the Dummy generator -option as shown in `Traffic generator instructions -`__ - -VSPERF Installation --------------------- -To see the supported Operating Systems, vSwitches and system requirements, -please follow the `installation instructions -`__ to -install. - -Traffic Generator Setup ------------------------ -Follow the `Traffic generator instructions -`__ to -install and configure a suitable traffic generator. - -Cloning and building src dependencies -------------------------------------- - -In order to run VSPERF, you will need to download DPDK and OVS. You can -do this manually and build them in a preferred location, OR you could -use vswitchperf/src. The vswitchperf/src directory contains makefiles -that will allow you to clone and build the libraries that VSPERF depends -on, such as DPDK and OVS. To clone and build simply: - -.. code-block:: console - - $ cd src - $ make - -VSPERF can be used with stock OVS (without DPDK support). When build -is finished, the libraries are stored in src_vanilla directory. - -The 'make' builds all options in src: - -* Vanilla OVS -* OVS with vhost_user as the guest access method (with DPDK support) -* OVS with vhost_cuse s the guest access method (with DPDK support) - -The vhost_user build will reside in src/ovs/ -The vhost_cuse build will reside in vswitchperf/src_cuse -The Vanilla OVS build will reside in vswitchperf/src_vanilla - -To delete a src subdirectory and its contents to allow you to re-clone simply -use: - -.. code-block:: console - - $ make clobber - -Configure the ``./conf/10_custom.conf`` file --------------------------------------------- -The ``10_custom.conf`` file is the configuration file that overrides -default configurations in all the other configuration files in ``./conf`` -The supplied ``10_custom.conf`` file **MUST** be modified, as it contains -configuration items for which there are no reasonable default values. - -The configuration items that can be added is not limited to the initial -contents. Any configuration item mentioned in any .conf file in -``./conf`` directory can be added and that item will be overridden by -the custom configuration value. - -Using a custom settings file ----------------------------- - -If your ``10_custom.conf`` doesn't reside in the ``./conf`` directory -of if you want to use an alternative configuration file, the file can -be passed to ``vsperf`` via the ``--conf-file`` argument. - -.. code-block:: console - - $ ./vsperf --conf-file ... - -Note that configuration passed in via the environment (``--load-env``) -or via another command line argument will override both the default and -your custom configuration files. This "priority hierarchy" can be -described like so (1 = max priority): - -1. Command line arguments -2. Environment variables -3. Configuration file(s) - -vloop_vnf ---------- -vsperf uses a VM called vloop_vnf for looping traffic in the PVP and PVVP -deployment scenarios. The image can be downloaded from -``__. - -.. code-block:: console - - $ wget http://artifacts.opnfv.org/vswitchperf/vloop-vnf-ubuntu-14.04_20151216.qcow2 - -vloop_vnf forwards traffic through a VM using one of: -* DPDK testpmd -* Linux Bridge -* l2fwd kernel Module. - -Alternatively you can use your own QEMU image. - -l2fwd Kernel Module -------------------- -A Kernel Module that provides OSI Layer 2 Ipv4 termination or forwarding with -support for Destination Network Address Translation (DNAT) for both the MAC and -IP addresses. l2fwd can be found in /src/l2fwd - -Executing tests ---------------- - -Before running any tests make sure you have root permissions by adding -the following line to /etc/sudoers: - -.. code-block:: console - - username ALL=(ALL) NOPASSWD: ALL - -username in the example above should be replaced with a real username. - -To list the available tests: - -.. code-block:: console - - $ ./vsperf --list - -To run a single test: - -.. code-block:: console - - $ ./vsperf $TESTNAME - -Where $TESTNAME is the name of the vsperf test you would like to run. - -To run a group of tests, for example all tests with a name containing -'RFC2544': - -.. code-block:: console - - $ ./vsperf --conf-file=/10_custom.conf --tests="RFC2544" - -To run all tests: - -.. code-block:: console - - $ ./vsperf --conf-file=/10_custom.conf - -Some tests allow for configurable parameters, including test duration -(in seconds) as well as packet sizes (in bytes). - -.. code:: bash - - $ ./vsperf --conf-file user_settings.py - --tests RFC2544Tput - --test-param "duration=10;pkt_sizes=128" - -For all available options, check out the help dialog: - -.. code-block:: console - - $ ./vsperf --help - -Executing Vanilla OVS tests ----------------------------- - -1. If needed, recompile src for all OVS variants - -.. code-block:: console - - $ cd src - $ make distclean - $ make - -2. Update your ''10_custom.conf'' file to use the appropriate variables -for Vanilla OVS: - -.. code-block:: console - - VSWITCH = 'OvsVanilla' - VSWITCH_VANILLA_PHY_PORT_NAMES = ['$PORT1', '$PORT1'] - -Where $PORT1 and $PORT2 are the Linux interfaces you'd like to bind -to the vswitch. - -3. Run test: - -.. code-block:: console - - $ ./vsperf --conf-file= - -Please note if you don't want to configure Vanilla OVS through the -configuration file, you can pass it as a CLI argument; BUT you must -set the ports. - -.. code-block:: console - - $ ./vsperf --vswitch OvsVanilla - - -Executing PVP and PVVP tests ----------------------------- -To run tests using vhost-user as guest access method: - -1. Set VHOST_METHOD and VNF of your settings file to: - -.. code-block:: console - - VHOST_METHOD='user' - VNF = 'QemuDpdkVhost' - -2. If needed, recompile src for all OVS variants - -.. code-block:: console - - $ cd src - $ make distclean - $ make - -3. Run test: - -.. code-block:: console - - $ ./vsperf --conf-file=/10_custom.conf - -To run tests using vhost-cuse as guest access method: - -1. Set VHOST_METHOD and VNF of your settings file to: - -.. code-block:: console - - VHOST_METHOD='cuse' - VNF = 'QemuDpdkVhostCuse' - -2. If needed, recompile src for all OVS variants - -.. code-block:: console - - $ cd src - $ make distclean - $ make - -3. Run test: - -.. code-block:: console - - $ ./vsperf --conf-file=/10_custom.conf - -Executing PVP tests using Vanilla OVS -------------------------------------- -To run tests using Vanilla OVS: - -1. Set the following variables: - -.. code-block:: console - - VSWITCH = 'OvsVanilla' - VNF = 'QemuVirtioNet' - - VANILLA_TGEN_PORT1_IP = n.n.n.n - VANILLA_TGEN_PORT1_MAC = nn:nn:nn:nn:nn:nn - - VANILLA_TGEN_PORT2_IP = n.n.n.n - VANILLA_TGEN_PORT2_MAC = nn:nn:nn:nn:nn:nn - - VANILLA_BRIDGE_IP = n.n.n.n - - or use --test-param - - $ ./vsperf --conf-file=/10_custom.conf - --test-param "vanilla_tgen_tx_ip=n.n.n.n; - vanilla_tgen_tx_mac=nn:nn:nn:nn:nn:nn" - - -2. If needed, recompile src for all OVS variants - -.. code-block:: console - - $ cd src - $ make distclean - $ make - -3. Run test: - -.. code-block:: console - - $ ./vsperf --conf-file/10_custom.conf - -Selection of loopback application for PVP and PVVP tests --------------------------------------------------------- -To select loopback application, which will perform traffic forwarding -inside VM, following configuration parameter should be configured: - -.. code-block:: console - - GUEST_LOOPBACK = ['testpmd', 'testpmd'] - -or use --test-param - -.. code-block:: console - - $ ./vsperf --conf-file=/10_custom.conf - --test-param "guest_loopback=testpmd" - -Supported loopback applications are: - -.. code-block:: console - - 'testpmd' - testpmd from dpdk will be built and used - 'l2fwd' - l2fwd module provided by Huawei will be built and used - 'linux_bridge' - linux bridge will be configured - 'buildin' - nothing will be configured by vsperf; VM image must - ensure traffic forwarding between its interfaces - -Guest loopback application must be configured, otherwise traffic -will not be forwarded by VM and testcases with PVP and PVVP deployments -will fail. Guest loopback application is set to 'testpmd' by default. - -Executing Packet Forwarding tests ------------------------------------ - -To select application, which will perform packet forwarding, -following configuration parameter should be configured: - - .. code-block:: console - - VSWITCH = 'none' - PKTFWD = 'TestPMD' - - or use --vswitch and --fwdapp - - $ ./vsperf --conf-file user_settings.py - --vswitch none - --fwdapp TestPMD - -Supported Packet Forwarding applications are: - - .. code-block:: console - - 'testpmd' - testpmd from dpdk - - -1. Update your ''10_custom.conf'' file to use the appropriate variables -for selected Packet Forwarder: - .. code-block:: console - - # testpmd configuration - TESTPMD_ARGS = [] - # packet forwarding mode: io|mac|mac_retry|macswap|flowgen|rxonly|txonly|csum|icmpecho - TESTPMD_FWD_MODE = 'csum' - # checksum calculation layer: ip|udp|tcp|sctp|outer-ip - TESTPMD_CSUM_LAYER = 'ip' - # checksum calculation place: hw (hardware) | sw (software) - TESTPMD_CSUM_CALC = 'sw' - # recognize tunnel headers: on|off - TESTPMD_CSUM_PARSE_TUNNEL = 'off' - -2. Run test: - - .. code-block:: console - - $ ./vsperf --conf-file - -VSPERF modes of operation -------------------------- -VSPERF can be run in different modes. By default it will configure vSwitch, -traffic generator and VNF. However it can be used just for configuration -and execution of traffic generator. Another option is execution of all -components except traffic generator itself. - -Mode of operation is driven by configuration parameter -m or --mode - -.. code-block:: console - - -m MODE, --mode MODE vsperf mode of operation; - Values: - "normal" - execute vSwitch, VNF and traffic generator - "trafficgen" - execute only traffic generator - "trafficgen-off" - execute vSwitch and VNF - -In case, that VSPERF is executed in "trafficgen" mode, then configuration -of traffic generator should be configured through --test-param option. -Supported CLI options useful for traffic generator configuration are: - -.. code-block:: console - - 'traffic_type' - One of the supported traffic types. E.g. rfc2544, - back2back or continuous - Default value is "rfc2544". - 'bidirectional' - Specifies if generated traffic will be full-duplex (true) - or half-duplex (false) - Default value is "false". - 'iload' - Defines desired percentage of frame rate used during - continuous stream tests. - Default value is 100. - 'multistream' - Defines number of flows simulated by traffic generator. - Value 0 disables MultiStream feature - Default value is 0. - 'stream_type' - Stream Type is an extension of the "MultiStream" feature. - If MultiStream is disabled, then Stream Type will be - ignored. Stream Type defines ISO OSI network layer used - for simulation of multiple streams. - Default value is "L4". - -Example of execution of VSPERF in "trafficgen" mode: - -.. code-block:: console - - $ ./vsperf -m trafficgen --trafficgen IxNet --conf-file vsperf.conf - --test-params "traffic_type=continuous;bidirectional=True;iload=60" - -Code change verification by pylint ----------------------------------- -Every developer participating in VSPERF project should run -pylint before his python code is submitted for review. Project -specific configuration for pylint is available at 'pylint.rc'. - -Example of manual pylint invocation: - -.. code-block:: console - - $ pylint --rcfile ./pylintrc ./vsperf - -GOTCHAs: --------- - -OVS with DPDK and QEMU -~~~~~~~~~~~~~~~~~~~~~~~ -If you encounter the following error: "before (last 100 chars): -'-path=/dev/hugepages,share=on: unable to map backing store for -hugepages: Cannot allocate memory\r\n\r\n" with the PVP or PVVP -deployment scenario, check the amount of hugepages on your system: - -.. code-block:: console - - $ cat /proc/meminfo | grep HugePages - - -By default the vswitchd is launched with 1Gb of memory, to change -this, modify --socket-mem parameter in conf/02_vswitch.conf to allocate -an appropriate amount of memory: - -.. code-block:: console - - VSWITCHD_DPDK_ARGS = ['-c', '0x4', '-n', '4', '--socket-mem 1024,0'] - diff --git a/docs/userguide/testusage.rst b/docs/userguide/testusage.rst new file mode 100755 index 00000000..c509d5e8 --- /dev/null +++ b/docs/userguide/testusage.rst @@ -0,0 +1,468 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, Intel Corporation, AT&T and others. + +vSwitchPerf test suites userguide +================================= + +General +------- + +VSPERF requires a traffic generators to run tests, automated traffic gen +support in VSPERF includes: + +- IXIA traffic generator (IxNetwork hardware) and a machine that runs the IXIA + client software. +- Spirent traffic generator (TestCenter hardware chassis or TestCenter virtual + in a VM) and a VM to run the Spirent Virtual Deployment Service image, + formerly known as "Spirent LabServer". + +If you want to use another traffic generator, please select the Dummy generator +option as shown in `Traffic generator instructions +`__ + +VSPERF Installation +-------------------- +To see the supported Operating Systems, vSwitches and system requirements, +please follow the `installation instructions +`__ to +install. + +Traffic Generator Setup +----------------------- +Follow the `Traffic generator instructions +`__ to +install and configure a suitable traffic generator. + +Cloning and building src dependencies +------------------------------------- + +In order to run VSPERF, you will need to download DPDK and OVS. You can +do this manually and build them in a preferred location, OR you could +use vswitchperf/src. The vswitchperf/src directory contains makefiles +that will allow you to clone and build the libraries that VSPERF depends +on, such as DPDK and OVS. To clone and build simply: + +.. code-block:: console + + $ cd src + $ make + +VSPERF can be used with stock OVS (without DPDK support). When build +is finished, the libraries are stored in src_vanilla directory. + +The 'make' builds all options in src: + +* Vanilla OVS +* OVS with vhost_user as the guest access method (with DPDK support) +* OVS with vhost_cuse s the guest access method (with DPDK support) + +The vhost_user build will reside in src/ovs/ +The vhost_cuse build will reside in vswitchperf/src_cuse +The Vanilla OVS build will reside in vswitchperf/src_vanilla + +To delete a src subdirectory and its contents to allow you to re-clone simply +use: + +.. code-block:: console + + $ make clobber + +Configure the ``./conf/10_custom.conf`` file +-------------------------------------------- +The ``10_custom.conf`` file is the configuration file that overrides +default configurations in all the other configuration files in ``./conf`` +The supplied ``10_custom.conf`` file **MUST** be modified, as it contains +configuration items for which there are no reasonable default values. + +The configuration items that can be added is not limited to the initial +contents. Any configuration item mentioned in any .conf file in +``./conf`` directory can be added and that item will be overridden by +the custom configuration value. + +Using a custom settings file +---------------------------- + +If your ``10_custom.conf`` doesn't reside in the ``./conf`` directory +of if you want to use an alternative configuration file, the file can +be passed to ``vsperf`` via the ``--conf-file`` argument. + +.. code-block:: console + + $ ./vsperf --conf-file ... + +Note that configuration passed in via the environment (``--load-env``) +or via another command line argument will override both the default and +your custom configuration files. This "priority hierarchy" can be +described like so (1 = max priority): + +1. Command line arguments +2. Environment variables +3. Configuration file(s) + +vloop_vnf +--------- +vsperf uses a VM called vloop_vnf for looping traffic in the PVP and PVVP +deployment scenarios. The image can be downloaded from +``__. + +.. code-block:: console + + $ wget http://artifacts.opnfv.org/vswitchperf/vloop-vnf-ubuntu-14.04_20151216.qcow2 + +vloop_vnf forwards traffic through a VM using one of: +* DPDK testpmd +* Linux Bridge +* l2fwd kernel Module. + +Alternatively you can use your own QEMU image. + +l2fwd Kernel Module +------------------- +A Kernel Module that provides OSI Layer 2 Ipv4 termination or forwarding with +support for Destination Network Address Translation (DNAT) for both the MAC and +IP addresses. l2fwd can be found in /src/l2fwd + +Executing tests +--------------- + +Before running any tests make sure you have root permissions by adding +the following line to /etc/sudoers: + +.. code-block:: console + + username ALL=(ALL) NOPASSWD: ALL + +username in the example above should be replaced with a real username. + +To list the available tests: + +.. code-block:: console + + $ ./vsperf --list + +To run a single test: + +.. code-block:: console + + $ ./vsperf $TESTNAME + +Where $TESTNAME is the name of the vsperf test you would like to run. + +To run a group of tests, for example all tests with a name containing +'RFC2544': + +.. code-block:: console + + $ ./vsperf --conf-file=/10_custom.conf --tests="RFC2544" + +To run all tests: + +.. code-block:: console + + $ ./vsperf --conf-file=/10_custom.conf + +Some tests allow for configurable parameters, including test duration +(in seconds) as well as packet sizes (in bytes). + +.. code:: bash + + $ ./vsperf --conf-file user_settings.py + --tests RFC2544Tput + --test-param "duration=10;pkt_sizes=128" + +For all available options, check out the help dialog: + +.. code-block:: console + + $ ./vsperf --help + +Executing Vanilla OVS tests +---------------------------- + +1. If needed, recompile src for all OVS variants + +.. code-block:: console + + $ cd src + $ make distclean + $ make + +2. Update your ''10_custom.conf'' file to use the appropriate variables +for Vanilla OVS: + +.. code-block:: console + + VSWITCH = 'OvsVanilla' + VSWITCH_VANILLA_PHY_PORT_NAMES = ['$PORT1', '$PORT1'] + +Where $PORT1 and $PORT2 are the Linux interfaces you'd like to bind +to the vswitch. + +3. Run test: + +.. code-block:: console + + $ ./vsperf --conf-file= + +Please note if you don't want to configure Vanilla OVS through the +configuration file, you can pass it as a CLI argument; BUT you must +set the ports. + +.. code-block:: console + + $ ./vsperf --vswitch OvsVanilla + + +Executing PVP and PVVP tests +---------------------------- +To run tests using vhost-user as guest access method: + +1. Set VHOST_METHOD and VNF of your settings file to: + +.. code-block:: console + + VHOST_METHOD='user' + VNF = 'QemuDpdkVhost' + +2. If needed, recompile src for all OVS variants + +.. code-block:: console + + $ cd src + $ make distclean + $ make + +3. Run test: + +.. code-block:: console + + $ ./vsperf --conf-file=/10_custom.conf + +To run tests using vhost-cuse as guest access method: + +1. Set VHOST_METHOD and VNF of your settings file to: + +.. code-block:: console + + VHOST_METHOD='cuse' + VNF = 'QemuDpdkVhostCuse' + +2. If needed, recompile src for all OVS variants + +.. code-block:: console + + $ cd src + $ make distclean + $ make + +3. Run test: + +.. code-block:: console + + $ ./vsperf --conf-file=/10_custom.conf + +Executing PVP tests using Vanilla OVS +------------------------------------- +To run tests using Vanilla OVS: + +1. Set the following variables: + +.. code-block:: console + + VSWITCH = 'OvsVanilla' + VNF = 'QemuVirtioNet' + + VANILLA_TGEN_PORT1_IP = n.n.n.n + VANILLA_TGEN_PORT1_MAC = nn:nn:nn:nn:nn:nn + + VANILLA_TGEN_PORT2_IP = n.n.n.n + VANILLA_TGEN_PORT2_MAC = nn:nn:nn:nn:nn:nn + + VANILLA_BRIDGE_IP = n.n.n.n + + or use --test-param + + $ ./vsperf --conf-file=/10_custom.conf + --test-param "vanilla_tgen_tx_ip=n.n.n.n; + vanilla_tgen_tx_mac=nn:nn:nn:nn:nn:nn" + + +2. If needed, recompile src for all OVS variants + +.. code-block:: console + + $ cd src + $ make distclean + $ make + +3. Run test: + +.. code-block:: console + + $ ./vsperf --conf-file/10_custom.conf + +Selection of loopback application for PVP and PVVP tests +-------------------------------------------------------- +To select loopback application, which will perform traffic forwarding +inside VM, following configuration parameter should be configured: + +.. code-block:: console + + GUEST_LOOPBACK = ['testpmd', 'testpmd'] + +or use --test-param + +.. code-block:: console + + $ ./vsperf --conf-file=/10_custom.conf + --test-param "guest_loopback=testpmd" + +Supported loopback applications are: + +.. code-block:: console + + 'testpmd' - testpmd from dpdk will be built and used + 'l2fwd' - l2fwd module provided by Huawei will be built and used + 'linux_bridge' - linux bridge will be configured + 'buildin' - nothing will be configured by vsperf; VM image must + ensure traffic forwarding between its interfaces + +Guest loopback application must be configured, otherwise traffic +will not be forwarded by VM and testcases with PVP and PVVP deployments +will fail. Guest loopback application is set to 'testpmd' by default. + +Executing Packet Forwarding tests +----------------------------------- + +To select application, which will perform packet forwarding, +following configuration parameter should be configured: + + .. code-block:: console + + VSWITCH = 'none' + PKTFWD = 'TestPMD' + + or use --vswitch and --fwdapp + + $ ./vsperf --conf-file user_settings.py + --vswitch none + --fwdapp TestPMD + +Supported Packet Forwarding applications are: + + .. code-block:: console + + 'testpmd' - testpmd from dpdk + + +1. Update your ''10_custom.conf'' file to use the appropriate variables +for selected Packet Forwarder: + .. code-block:: console + + # testpmd configuration + TESTPMD_ARGS = [] + # packet forwarding mode: io|mac|mac_retry|macswap|flowgen|rxonly|txonly|csum|icmpecho + TESTPMD_FWD_MODE = 'csum' + # checksum calculation layer: ip|udp|tcp|sctp|outer-ip + TESTPMD_CSUM_LAYER = 'ip' + # checksum calculation place: hw (hardware) | sw (software) + TESTPMD_CSUM_CALC = 'sw' + # recognize tunnel headers: on|off + TESTPMD_CSUM_PARSE_TUNNEL = 'off' + +2. Run test: + + .. code-block:: console + + $ ./vsperf --conf-file + +VSPERF modes of operation +------------------------- +VSPERF can be run in different modes. By default it will configure vSwitch, +traffic generator and VNF. However it can be used just for configuration +and execution of traffic generator. Another option is execution of all +components except traffic generator itself. + +Mode of operation is driven by configuration parameter -m or --mode + +.. code-block:: console + + -m MODE, --mode MODE vsperf mode of operation; + Values: + "normal" - execute vSwitch, VNF and traffic generator + "trafficgen" - execute only traffic generator + "trafficgen-off" - execute vSwitch and VNF + +In case, that VSPERF is executed in "trafficgen" mode, then configuration +of traffic generator should be configured through --test-param option. +Supported CLI options useful for traffic generator configuration are: + +.. code-block:: console + + 'traffic_type' - One of the supported traffic types. E.g. rfc2544, + back2back or continuous + Default value is "rfc2544". + 'bidirectional' - Specifies if generated traffic will be full-duplex (true) + or half-duplex (false) + Default value is "false". + 'iload' - Defines desired percentage of frame rate used during + continuous stream tests. + Default value is 100. + 'multistream' - Defines number of flows simulated by traffic generator. + Value 0 disables MultiStream feature + Default value is 0. + 'stream_type' - Stream Type is an extension of the "MultiStream" feature. + If MultiStream is disabled, then Stream Type will be + ignored. Stream Type defines ISO OSI network layer used + for simulation of multiple streams. + Default value is "L4". + +Example of execution of VSPERF in "trafficgen" mode: + +.. code-block:: console + + $ ./vsperf -m trafficgen --trafficgen IxNet --conf-file vsperf.conf + --test-params "traffic_type=continuous;bidirectional=True;iload=60" + +Code change verification by pylint +---------------------------------- +Every developer participating in VSPERF project should run +pylint before his python code is submitted for review. Project +specific configuration for pylint is available at 'pylint.rc'. + +Example of manual pylint invocation: + +.. code-block:: console + + $ pylint --rcfile ./pylintrc ./vsperf + +GOTCHAs: +-------- + +OVS with DPDK and QEMU +~~~~~~~~~~~~~~~~~~~~~~~ +If you encounter the following error: "before (last 100 chars): +'-path=/dev/hugepages,share=on: unable to map backing store for +hugepages: Cannot allocate memory\r\n\r\n" with the PVP or PVVP +deployment scenario, check the amount of hugepages on your system: + +.. code-block:: console + + $ cat /proc/meminfo | grep HugePages + + +By default the vswitchd is launched with 1Gb of memory, to change +this, modify --socket-mem parameter in conf/02_vswitch.conf to allocate +an appropriate amount of memory: + +.. code-block:: console + + VSWITCHD_DPDK_ARGS = ['-c', '0x4', '-n', '4', '--socket-mem 1024,0'] + +More information +---------------- + +For more information and details refer to the vSwitchPerf user guide at: +http://artifacts.opnfv.org/vswitchperf/brahmaputra/userguide/index.html + -- cgit 1.2.3-korg