From a512ca1610a603c366de021668aa5a5d5d13f44f Mon Sep 17 00:00:00 2001 From: Martin Goldammer Date: Thu, 24 Aug 2017 09:28:50 -0700 Subject: trex: Add support Trex traffic generator Topology are two physical servers, on first is trex and second is VSPERF. Trex is running in stateless mode this means that on server where is located trex repo is running trex binary file and VSPERF working with server via python API. JIRA: VSPERF-528 Change-Id: Id8819495325ebc13fdce365f4af0e040ce68cd0e Signed-off-by: Martin Goldammer Reviewed-by: Martin Klozik Reviewed-by: Al Morton Reviewed-by: Christian Trautman Reviewed-by: Trevor Cooper --- docs/testing/user/configguide/trafficgen.rst | 96 ++++++++++++++++++++++++++++ 1 file changed, 96 insertions(+) (limited to 'docs/testing/user') diff --git a/docs/testing/user/configguide/trafficgen.rst b/docs/testing/user/configguide/trafficgen.rst index 1059ce12..3c827f38 100644 --- a/docs/testing/user/configguide/trafficgen.rst +++ b/docs/testing/user/configguide/trafficgen.rst @@ -18,6 +18,7 @@ VSPERF supports the following traffic generators: * `Spirent TestCenter`_ * `Xena Networks`_ * MoonGen_ + * Trex_ To see the list of traffic gens from the cli: @@ -714,3 +715,98 @@ set to allow for proper connections to the host with MoonGen. TRAFFICGEN_MOONGEN_BASE_DIR = "" TRAFFICGEN_MOONGEN_PORTS = "" TRAFFICGEN_MOONGEN_LINE_SPEED_GBPS = "" + +Trex +---- + +Installation +~~~~~~~~~~~~ + +Trex architecture overview and general installation instructions +can be found here: + +https://trex-tgn.cisco.com/trex/doc/trex_stateless.html + +You can directly download from GitHub: + +.. code-block:: console + + git clone https://github.com/cisco-system-traffic-generator/trex-core + +and use the master branch: + +.. code-block:: console + + git checkout master + +or Trex latest release you can download from here: + +.. code-block:: console + + wget --no-cache http://trex-tgn.cisco.com/trex/release/latest + +After download, Trex repo has to be built: + +.. code-block:: console + + cd trex-core/linux_dpdk + ./b configure (run only once) + ./b build + +Next step is to create a minimum configuration file. It can be created by script ``dpdk_setup_ports.py``. +The script with parameter ``-i`` will run in interactive mode and it will create file ``/etc/trex_cfg.yaml``. + +.. code-block:: console + + cd trex-core/scripts + sudo ./dpdk_setup_ports.py -i + +Or example of configuration file can be found at location below, but it must be updated manually: + +.. code-block:: console + + cp trex-core/scripts/cfg/simple_cfg /etc/trex_cfg.yaml + +For additional information about configuration file see official documentation (chapter 3.1.2): + +https://trex-tgn.cisco.com/trex/doc/trex_manual.html#_creating_minimum_configuration_file + +After compilation and configuration it is possible to run trex server in stateless mode. +It is neccesary for proper connection between Trex server and VSPERF. + +.. code-block:: console + + cd trex-core/scripts/ + ./t-rex-64 -i + +For additional information about Trex stateless mode see Trex stateless documentation: + +https://trex-tgn.cisco.com/trex/doc/trex_stateless.html + +**NOTE:** One will need to set up ssh login to not use passwords between the server +running Trex and the device under test (running the VSPERF test +infrastructure). This is because VSPERF on one server uses 'ssh' to +configure and run Trex upon the other server. + +One can set up this ssh access by doing the following on both servers: + +.. code-block:: console + + ssh-keygen -b 2048 -t rsa + ssh-copy-id + +Configuration +~~~~~~~~~~~~~ + +Connection information for Trex must be supplied inside the custom configuration +file. The following parameters must be set to allow for proper connections to the host with Trex. +Example of this configuration is in conf/03_traffic.conf or conf/10_custom.conf. + +.. code-block:: console + + TRAFFICGEN_TREX_HOST_IP_ADDR = '' + TRAFFICGEN_TREX_USER = '' + TRAFFICGEN_TREX_BASE_DIR = '' + +TRAFFICGEN_TREX_USER has to have sudo permission and passwordless access. +TRAFFICGEN_TREX_BASE_DIR is the place, where is stored 't-rex-64' file. -- cgit 1.2.3-korg