From 3f0fe318257a7d1c73a17081302946cdc4e69c00 Mon Sep 17 00:00:00 2001 From: Christian Trautman Date: Tue, 6 Feb 2018 13:57:42 -0500 Subject: Trex_speed_improvement: Add logic for dealing with high speed cards Adds configuration options and logic to detect maximum supported speed of T-Rex server side cards. 1. Adds logic to pull maximum supported speed from port info 2. Adds forcable option to have user specify maximum speed 3. If logic cannot detect speed from port_info because it is not available or the forcable option is not set it will assume 10G speeds. 4. Tested on Intel XXV25G and Mellanox ConnectX-5 cards 5. Added packet structure logging to show packet info for better debugging capabilities 6. Adds core mask to take advantage of multiple cores if server is started with more than default number of cores 7. Adds packets lost logging to RFC2544 Throughput testing JIRA: VSPERF-559 Change-Id: I7fcfda7ccc408c30830950ee3668e01b8624c20a Signed-off-by: Christian Trautman --- docs/testing/user/configguide/trafficgen.rst | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'docs/testing/user') diff --git a/docs/testing/user/configguide/trafficgen.rst b/docs/testing/user/configguide/trafficgen.rst index 33824486..061d3d7a 100644 --- a/docs/testing/user/configguide/trafficgen.rst +++ b/docs/testing/user/configguide/trafficgen.rst @@ -795,6 +795,13 @@ It is neccesary for proper connection between Trex server and VSPERF. Firewall must allow a connection from DUT (VSPERF) to the T-Rex server running at TCP port 4501. +**NOTE:** For high speed cards it may be advantageous to start T-Rex with more transmit queues/cores. + +.. code-block:: console + + cd trex-cores/scripts/ + ./t-rex-64 -i -c 10 + For additional information about Trex stateless mode see Trex stateless documentation: https://trex-tgn.cisco.com/trex/doc/trex_stateless.html @@ -862,6 +869,22 @@ modified. Enable Promiscuous mode when doing multistream at layer 2 testing with TRAFFICGEN_TREX_PROMISCUOUS=True +Card Bandwidth Options +~~~~~~~~~~~~~~~~~~~~~~ + +T-Rex API will attempt to retrieve the highest possible speed from the card using internal +calls to port information. If you are using two separate cards then it will take the lowest +of the two cards as the max speed. If necessary you can try to force the API to use a +specific maximum speed per port. The below configurations can be adjusted to enable this. + +.. code-block:: console + + TRAFFICGEN_TREX_FORCE_PORT_SPEED = True + TRAFFICGEN_TREX_PORT_SPEED = 40000 # 40 gig + +**Note::** Setting higher than possible speeds will result in unpredictable behavior when running +tests such as duration inaccuracy and/or complete test failure. + RFC2544 Validation ~~~~~~~~~~~~~~~~~~ -- cgit 1.2.3-korg