From f4a955b25a59af2984b0910e5f2cb10a0d1150e5 Mon Sep 17 00:00:00 2001 From: Trevor Cooper Date: Wed, 22 Mar 2017 00:49:09 +0000 Subject: Revert "Moved doc files to testing document structure This reverts commit 32a5263216d79ad34041dca55357278f092bb931. Change-Id: I641b967badffd52ffd9e249b75e67bb7c82a8150 Signed-off-by: Trevor Cooper --- docs/testing/user/userguide/integration.rst | 504 ----------------- docs/testing/user/userguide/teststeps.rst | 667 ---------------------- docs/testing/user/userguide/testusage.rst | 848 ---------------------------- docs/testing/user/userguide/yardstick.rst | 250 -------- 4 files changed, 2269 deletions(-) delete mode 100644 docs/testing/user/userguide/integration.rst delete mode 100644 docs/testing/user/userguide/teststeps.rst delete mode 100644 docs/testing/user/userguide/testusage.rst delete mode 100644 docs/testing/user/userguide/yardstick.rst (limited to 'docs/testing/user/userguide') diff --git a/docs/testing/user/userguide/integration.rst b/docs/testing/user/userguide/integration.rst deleted file mode 100644 index 83b29da6..00000000 --- a/docs/testing/user/userguide/integration.rst +++ /dev/null @@ -1,504 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, Intel Corporation, AT&T and others. - -.. _integration-tests: - -Integration tests -================= - -VSPERF includes a set of integration tests defined in conf/integration. -These tests can be run by specifying --integration as a parameter to vsperf. -Current tests in conf/integration include switch functionality and Overlay -tests. - -Tests in the conf/integration can be used to test scaling of different switch -configurations by adding steps into the test case. - -For the overlay tests VSPERF supports VXLAN, GRE and GENEVE tunneling protocols. -Testing of these protocols is limited to unidirectional traffic and -P2P (Physical to Physical scenarios). - -NOTE: The configuration for overlay tests provided in this guide is for -unidirectional traffic only. - -Executing Integration Tests ---------------------------- - -To execute integration tests VSPERF is run with the integration parameter. To -view the current test list simply execute the following command: - -.. code-block:: console - - ./vsperf --integration --list - -The standard tests included are defined inside the -``conf/integration/01_testcases.conf`` file. - -Executing Tunnel encapsulation tests ------------------------------------- - -The VXLAN OVS DPDK encapsulation tests requires IPs, MAC addresses, -bridge names and WHITELIST_NICS for DPDK. - -NOTE: Only Ixia traffic generators currently support the execution of the tunnel -encapsulation tests. Support for other traffic generators may come in a future -release. - -Default values are already provided. To customize for your environment, override -the following variables in you user_settings.py file: - - .. code-block:: python - - # Variables defined in conf/integration/02_vswitch.conf - # Tunnel endpoint for Overlay P2P deployment scenario - # used for br0 - VTEP_IP1 = '192.168.0.1/24' - - # Used as remote_ip in adding OVS tunnel port and - # to set ARP entry in OVS (e.g. tnl/arp/set br-ext 192.168.240.10 02:00:00:00:00:02 - VTEP_IP2 = '192.168.240.10' - - # Network to use when adding a route for inner frame data - VTEP_IP2_SUBNET = '192.168.240.0/24' - - # Bridge names - TUNNEL_INTEGRATION_BRIDGE = 'br0' - TUNNEL_EXTERNAL_BRIDGE = 'br-ext' - - # IP of br-ext - TUNNEL_EXTERNAL_BRIDGE_IP = '192.168.240.1/24' - - # vxlan|gre|geneve - TUNNEL_TYPE = 'vxlan' - - # Variables defined conf/integration/03_traffic.conf - # For OP2P deployment scenario - TRAFFICGEN_PORT1_MAC = '02:00:00:00:00:01' - TRAFFICGEN_PORT2_MAC = '02:00:00:00:00:02' - TRAFFICGEN_PORT1_IP = '1.1.1.1' - TRAFFICGEN_PORT2_IP = '192.168.240.10' - -To run VXLAN encapsulation tests: - - .. code-block:: console - - ./vsperf --conf-file user_settings.py --integration \ - --test-params 'TUNNEL_TYPE=vxlan' overlay_p2p_tput - -To run GRE encapsulation tests: - - .. code-block:: console - - ./vsperf --conf-file user_settings.py --integration \ - --test-params 'TUNNEL_TYPE=gre' overlay_p2p_tput - -To run GENEVE encapsulation tests: - - .. code-block:: console - - ./vsperf --conf-file user_settings.py --integration \ - --test-params 'TUNNEL_TYPE=geneve' overlay_p2p_tput - -To run OVS NATIVE tunnel tests (VXLAN/GRE/GENEVE): - -1. Install the OVS kernel modules - - .. code:: console - - cd src/ovs/ovs - sudo -E make modules_install - -2. Set the following variables: - - .. code-block:: python - - VSWITCH = 'OvsVanilla' - # Specify vport_* kernel module to test. - PATHS['vswitch']['OvsVanilla']['src']['modules'] = [ - 'vport_vxlan', - 'vport_gre', - 'vport_geneve', - 'datapath/linux/openvswitch.ko', - ] - - **NOTE:** In case, that Vanilla OVS is installed from binary package, then - please set ``PATHS['vswitch']['OvsVanilla']['bin']['modules']`` instead. - -3. Run tests: - - .. code-block:: console - - ./vsperf --conf-file user_settings.py --integration \ - --test-params 'TUNNEL_TYPE=vxlan' overlay_p2p_tput - - -Executing VXLAN decapsulation tests ------------------------------------- - -To run VXLAN decapsulation tests: - -1. Set the variables used in "Executing Tunnel encapsulation tests" - -2. Set dstmac of DUT_NIC2_MAC to the MAC adddress of the 2nd NIC of your DUT - - .. code-block:: python - - DUT_NIC2_MAC = '' - -3. Run test: - - .. code-block:: console - - ./vsperf --conf-file user_settings.py --integration overlay_p2p_decap_cont - -If you want to use different values for your VXLAN frame, you may set: - - .. code-block:: python - - VXLAN_FRAME_L3 = {'proto': 'udp', - 'packetsize': 64, - 'srcip': TRAFFICGEN_PORT1_IP, - 'dstip': '192.168.240.1', - } - VXLAN_FRAME_L4 = {'srcport': 4789, - 'dstport': 4789, - 'vni': VXLAN_VNI, - 'inner_srcmac': '01:02:03:04:05:06', - 'inner_dstmac': '06:05:04:03:02:01', - 'inner_srcip': '192.168.0.10', - 'inner_dstip': '192.168.240.9', - 'inner_proto': 'udp', - 'inner_srcport': 3000, - 'inner_dstport': 3001, - } - - -Executing GRE decapsulation tests ---------------------------------- - -To run GRE decapsulation tests: - -1. Set the variables used in "Executing Tunnel encapsulation tests" - -2. Set dstmac of DUT_NIC2_MAC to the MAC adddress of the 2nd NIC of your DUT - - .. code-block:: python - - DUT_NIC2_MAC = '' - -3. Run test: - - .. code-block:: console - - ./vsperf --conf-file user_settings.py --test-params 'TUNNEL_TYPE=gre' \ - --integration overlay_p2p_decap_cont - - -If you want to use different values for your GRE frame, you may set: - - .. code-block:: python - - GRE_FRAME_L3 = {'proto': 'gre', - 'packetsize': 64, - 'srcip': TRAFFICGEN_PORT1_IP, - 'dstip': '192.168.240.1', - } - - GRE_FRAME_L4 = {'srcport': 0, - 'dstport': 0 - 'inner_srcmac': '01:02:03:04:05:06', - 'inner_dstmac': '06:05:04:03:02:01', - 'inner_srcip': '192.168.0.10', - 'inner_dstip': '192.168.240.9', - 'inner_proto': 'udp', - 'inner_srcport': 3000, - 'inner_dstport': 3001, - } - - -Executing GENEVE decapsulation tests ------------------------------------- - -IxNet 7.3X does not have native support of GENEVE protocol. The -template, GeneveIxNetTemplate.xml_ClearText.xml, should be imported -into IxNET for this testcase to work. - -To import the template do: - -1. Run the IxNetwork TCL Server -2. Click on the Traffic menu -3. Click on the Traffic actions and click Edit Packet Templates -4. On the Template editor window, click Import. Select the template - located at ``3rd_party/ixia/GeneveIxNetTemplate.xml_ClearText.xml`` - and click import. -5. Restart the TCL Server. - -To run GENEVE decapsulation tests: - -1. Set the variables used in "Executing Tunnel encapsulation tests" - -2. Set dstmac of DUT_NIC2_MAC to the MAC adddress of the 2nd NIC of your DUT - - .. code-block:: python - - DUT_NIC2_MAC = '' - -3. Run test: - - .. code-block:: console - - ./vsperf --conf-file user_settings.py --test-params 'tunnel_type=geneve' \ - --integration overlay_p2p_decap_cont - - -If you want to use different values for your GENEVE frame, you may set: - - .. code-block:: python - - GENEVE_FRAME_L3 = {'proto': 'udp', - 'packetsize': 64, - 'srcip': TRAFFICGEN_PORT1_IP, - 'dstip': '192.168.240.1', - } - - GENEVE_FRAME_L4 = {'srcport': 6081, - 'dstport': 6081, - 'geneve_vni': 0, - 'inner_srcmac': '01:02:03:04:05:06', - 'inner_dstmac': '06:05:04:03:02:01', - 'inner_srcip': '192.168.0.10', - 'inner_dstip': '192.168.240.9', - 'inner_proto': 'udp', - 'inner_srcport': 3000, - 'inner_dstport': 3001, - } - - -Executing Native/Vanilla OVS VXLAN decapsulation tests ------------------------------------------------------- - -To run VXLAN decapsulation tests: - -1. Set the following variables in your user_settings.py file: - - .. code-block:: python - - PATHS['vswitch']['OvsVanilla']['src']['modules'] = [ - 'vport_vxlan', - 'datapath/linux/openvswitch.ko', - ] - - DUT_NIC1_MAC = '' - - TRAFFICGEN_PORT1_IP = '172.16.1.2' - TRAFFICGEN_PORT2_IP = '192.168.1.11' - - VTEP_IP1 = '172.16.1.2/24' - VTEP_IP2 = '192.168.1.1' - VTEP_IP2_SUBNET = '192.168.1.0/24' - TUNNEL_EXTERNAL_BRIDGE_IP = '172.16.1.1/24' - TUNNEL_INT_BRIDGE_IP = '192.168.1.1' - - VXLAN_FRAME_L2 = {'srcmac': - '01:02:03:04:05:06', - 'dstmac': DUT_NIC1_MAC - } - - VXLAN_FRAME_L3 = {'proto': 'udp', - 'packetsize': 64, - 'srcip': TRAFFICGEN_PORT1_IP, - 'dstip': '172.16.1.1', - } - - VXLAN_FRAME_L4 = { - 'srcport': 4789, - 'dstport': 4789, - 'protocolpad': 'true', - 'vni': 99, - 'inner_srcmac': '01:02:03:04:05:06', - 'inner_dstmac': '06:05:04:03:02:01', - 'inner_srcip': '192.168.1.2', - 'inner_dstip': TRAFFICGEN_PORT2_IP, - 'inner_proto': 'udp', - 'inner_srcport': 3000, - 'inner_dstport': 3001, - } - - **NOTE:** In case, that Vanilla OVS is installed from binary package, then - please set ``PATHS['vswitch']['OvsVanilla']['bin']['modules']`` instead. - -2. Run test: - - .. code-block:: console - - ./vsperf --conf-file user_settings.py --integration \ - --test-params 'tunnel_type=vxlan' overlay_p2p_decap_cont - -Executing Native/Vanilla OVS GRE decapsulation tests ----------------------------------------------------- - -To run GRE decapsulation tests: - -1. Set the following variables in your user_settings.py file: - - .. code-block:: python - - PATHS['vswitch']['OvsVanilla']['src']['modules'] = [ - 'vport_gre', - 'datapath/linux/openvswitch.ko', - ] - - DUT_NIC1_MAC = '' - - TRAFFICGEN_PORT1_IP = '172.16.1.2' - TRAFFICGEN_PORT2_IP = '192.168.1.11' - - VTEP_IP1 = '172.16.1.2/24' - VTEP_IP2 = '192.168.1.1' - VTEP_IP2_SUBNET = '192.168.1.0/24' - TUNNEL_EXTERNAL_BRIDGE_IP = '172.16.1.1/24' - TUNNEL_INT_BRIDGE_IP = '192.168.1.1' - - GRE_FRAME_L2 = {'srcmac': - '01:02:03:04:05:06', - 'dstmac': DUT_NIC1_MAC - } - - GRE_FRAME_L3 = {'proto': 'udp', - 'packetsize': 64, - 'srcip': TRAFFICGEN_PORT1_IP, - 'dstip': '172.16.1.1', - } - - GRE_FRAME_L4 = { - 'srcport': 4789, - 'dstport': 4789, - 'protocolpad': 'true', - 'inner_srcmac': '01:02:03:04:05:06', - 'inner_dstmac': '06:05:04:03:02:01', - 'inner_srcip': '192.168.1.2', - 'inner_dstip': TRAFFICGEN_PORT2_IP, - 'inner_proto': 'udp', - 'inner_srcport': 3000, - 'inner_dstport': 3001, - } - - **NOTE:** In case, that Vanilla OVS is installed from binary package, then - please set ``PATHS['vswitch']['OvsVanilla']['bin']['modules']`` instead. - -2. Run test: - - .. code-block:: console - - ./vsperf --conf-file user_settings.py --integration \ - --test-params 'tunnel_type=gre' overlay_p2p_decap_cont - -Executing Native/Vanilla OVS GENEVE decapsulation tests -------------------------------------------------------- - -To run GENEVE decapsulation tests: - -1. Set the following variables in your user_settings.py file: - - .. code-block:: python - - PATHS['vswitch']['OvsVanilla']['src']['modules'] = [ - 'vport_geneve', - 'datapath/linux/openvswitch.ko', - ] - - DUT_NIC1_MAC = '' - - TRAFFICGEN_PORT1_IP = '172.16.1.2' - TRAFFICGEN_PORT2_IP = '192.168.1.11' - - VTEP_IP1 = '172.16.1.2/24' - VTEP_IP2 = '192.168.1.1' - VTEP_IP2_SUBNET = '192.168.1.0/24' - TUNNEL_EXTERNAL_BRIDGE_IP = '172.16.1.1/24' - TUNNEL_INT_BRIDGE_IP = '192.168.1.1' - - GENEVE_FRAME_L2 = {'srcmac': - '01:02:03:04:05:06', - 'dstmac': DUT_NIC1_MAC - } - - GENEVE_FRAME_L3 = {'proto': 'udp', - 'packetsize': 64, - 'srcip': TRAFFICGEN_PORT1_IP, - 'dstip': '172.16.1.1', - } - - GENEVE_FRAME_L4 = {'srcport': 6081, - 'dstport': 6081, - 'protocolpad': 'true', - 'geneve_vni': 0, - 'inner_srcmac': '01:02:03:04:05:06', - 'inner_dstmac': '06:05:04:03:02:01', - 'inner_srcip': '192.168.1.2', - 'inner_dstip': TRAFFICGEN_PORT2_IP, - 'inner_proto': 'udp', - 'inner_srcport': 3000, - 'inner_dstport': 3001, - } - - **NOTE:** In case, that Vanilla OVS is installed from binary package, then - please set ``PATHS['vswitch']['OvsVanilla']['bin']['modules']`` instead. - -2. Run test: - - .. code-block:: console - - ./vsperf --conf-file user_settings.py --integration \ - --test-params 'tunnel_type=geneve' overlay_p2p_decap_cont - - -Executing Tunnel encapsulation+decapsulation tests --------------------------------------------------- - -The OVS DPDK encapsulation_decapsulation tests requires IPs, MAC addresses, -bridge names and WHITELIST_NICS for DPDK. - -The test cases can test the tunneling encap and decap without using any ingress -overlay traffic as compared to above test cases. To achieve this the OVS is -configured to perform encap and decap in a series on the same traffic stream as -given below. - -TRAFFIC-IN --> [ENCAP] --> [MOD-PKT] --> [DECAP] --> TRAFFIC-OUT - - -Default values are already provided. To customize for your environment, override -the following variables in you user_settings.py file: - - .. code-block:: python - - # Variables defined in conf/integration/02_vswitch.conf - - # Bridge names - TUNNEL_EXTERNAL_BRIDGE1 = 'br-phy1' - TUNNEL_EXTERNAL_BRIDGE2 = 'br-phy2' - TUNNEL_MODIFY_BRIDGE1 = 'br-mod1' - TUNNEL_MODIFY_BRIDGE2 = 'br-mod2' - - # IP of br-mod1 - TUNNEL_MODIFY_BRIDGE_IP1 = '10.0.0.1/24' - - # Mac of br-mod1 - TUNNEL_MODIFY_BRIDGE_MAC1 = '00:00:10:00:00:01' - - # IP of br-mod2 - TUNNEL_MODIFY_BRIDGE_IP2 = '20.0.0.1/24' - - #Mac of br-mod2 - TUNNEL_MODIFY_BRIDGE_MAC2 = '00:00:20:00:00:01' - - # vxlan|gre|geneve, Only VXLAN is supported for now. - TUNNEL_TYPE = 'vxlan' - -To run VXLAN encapsulation+decapsulation tests: - - .. code-block:: console - - ./vsperf --conf-file user_settings.py --integration \ - overlay_p2p_mod_tput diff --git a/docs/testing/user/userguide/teststeps.rst b/docs/testing/user/userguide/teststeps.rst deleted file mode 100644 index 870c3d80..00000000 --- a/docs/testing/user/userguide/teststeps.rst +++ /dev/null @@ -1,667 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, Intel Corporation, AT&T and others. - -.. _step-driven-tests: - -Step driven tests -================= - -In general, test scenarios are defined by a ``deployment`` used in the particular -test case definition. The chosen deployment scenario will take care of the vSwitch -configuration, deployment of VNFs and it can also affect configuration of a traffic -generator. In order to allow a more flexible way of testcase scripting, VSPERF supports -a detailed step driven testcase definition. It can be used to configure and -program vSwitch, deploy and terminate VNFs, execute a traffic generator, -modify a VSPERF configuration, execute external commands, etc. - -Execution of step driven tests is done on a step by step work flow starting -with step 0 as defined inside the test case. Each step of the test increments -the step number by one which is indicated in the log. - -.. code-block:: console - - (testcases.integration) - Step 0 'vswitch add_vport ['br0']' start - -Step driven tests can be used for both performance and integration testing. -In case of integration test, each step in the test case is validated. If a step -does not pass validation the test will fail and terminate. The test will continue -until a failure is detected or all steps pass. A csv report file is generated after -a test completes with an OK or FAIL result. - -In case of performance test, the validation of steps is not performed and -standard output files with results from traffic generator and underlying OS -details are generated by vsperf. - -Step driven testcases can be used in two different ways: - - # description of full testcase - in this case ``clean`` deployment is used - to indicate that vsperf should neither configure vSwitch nor deploy any VNF. - Test shall perform all required vSwitch configuration and programming and - deploy required number of VNFs. - - # modification of existing deployment - in this case, any of supported - deployments can be used to perform initial vSwitch configuration and - deployment of VNFs. Additional actions defined by TestSteps can be used - to alter vSwitch configuration or deploy additional VNFs. After the last - step is processed, the test execution will continue with traffic execution. - -Test objects and their functions --------------------------------- - -Every test step can call a function of one of the supported test objects. The list -of supported objects and their most common functions follows: - - * ``vswitch`` - provides functions for vSwitch configuration - - List of supported functions: - - * ``add_switch br_name`` - creates a new switch (bridge) with given ``br_name`` - * ``del_switch br_name`` - deletes switch (bridge) with given ``br_name`` - * ``add_phy_port br_name`` - adds a physical port into bridge specified by ``br_name`` - * ``add_vport br_name`` - adds a virtual port into bridge specified by ``br_name`` - * ``del_port br_name port_name`` - removes physical or virtual port specified by - ``port_name`` from bridge ``br_name`` - * ``add_flow br_name flow`` - adds flow specified by ``flow`` dictionary into - the bridge ``br_name``; Content of flow dictionary will be passed to the vSwitch. - In case of Open vSwitch it will be passed to the ``ovs-ofctl add-flow`` command. - Please see Open vSwitch documentation for the list of supported flow parameters. - * ``del_flow br_name [flow]`` - deletes flow specified by ``flow`` dictionary from - bridge ``br_name``; In case that optional parameter ``flow`` is not specified - or set to an empty dictionary ``{}``, then all flows from bridge ``br_name`` - will be deleted. - * ``dump_flows br_name`` - dumps all flows from bridge specified by ``br_name`` - * ``enable_stp br_name`` - enables Spanning Tree Protocol for bridge ``br_name`` - * ``disable_stp br_name`` - disables Spanning Tree Protocol for bridge ``br_name`` - * ``enable_rstp br_name`` - enables Rapid Spanning Tree Protocol for bridge ``br_name`` - * ``disable_rstp br_name`` - disables Rapid Spanning Tree Protocol for bridge ``br_name`` - - Examples: - - .. code-block:: python - - ['vswitch', 'add_switch', 'int_br0'] - - ['vswitch', 'del_switch', 'int_br0'] - - ['vswitch', 'add_phy_port', 'int_br0'] - - ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'] - - ['vswitch', 'add_flow', 'int_br0', {'in_port': '1', 'actions': ['output:2'], - 'idle_timeout': '0'}], - - ['vswitch', 'enable_rstp', 'int_br0'] - - * ``vnf[ID]`` - provides functions for deployment and termination of VNFs; Optional - alfanumerical ``ID`` is used for VNF identification in case that testcase - deploys multiple VNFs. - - List of supported functions: - - * ``start`` - starts a VNF based on VSPERF configuration - * ``stop`` - gracefully terminates given VNF - - Examples: - - .. code-block:: python - - ['vnf1', 'start'] - ['vnf2', 'start'] - ['vnf2', 'stop'] - ['vnf1', 'stop'] - - * ``trafficgen`` - triggers traffic generation - - List of supported functions: - - * ``send_traffic traffic`` - starts a traffic based on the vsperf configuration - and given ``traffic`` dictionary. More details about ``traffic`` dictionary - and its possible values are available at :ref:`Traffic Generator Integration Guide - ` - - Examples: - - .. code-block:: python - - ['trafficgen', 'send_traffic', {'traffic_type' : 'rfc2544_throughput'}] - - ['trafficgen', 'send_traffic', {'traffic_type' : 'rfc2544_back2back', 'bidir' : 'True'}] - - * ``settings`` - reads or modifies VSPERF configuration - - List of supported functions: - - * ``getValue param`` - returns value of given ``param`` - * ``setValue param value`` - sets value of ``param`` to given ``value`` - - Examples: - - .. code-block:: python - - ['settings', 'getValue', 'TOOLS'] - - ['settings', 'setValue', 'GUEST_USERNAME', ['root']] - - * ``namespace`` - creates or modifies network namespaces - - List of supported functions: - - * ``create_namespace name`` - creates new namespace with given ``name`` - * ``delete_namespace name`` - deletes namespace specified by its ``name`` - * ``assign_port_to_namespace port name [port_up]`` - assigns NIC specified by ``port`` - into given namespace ``name``; If optional parameter ``port_up`` is set to ``True``, - then port will be brought up. - * ``add_ip_to_namespace_eth port name addr cidr`` - assigns an IP address ``addr``/``cidr`` - to the NIC specified by ``port`` within namespace ``name`` - * ``reset_port_to_root port name`` - returns given ``port`` from namespace ``name`` back - to the root namespace - - Examples: - - .. code-block:: python - - ['namespace', 'create_namespace', 'testns'] - - ['namespace', 'assign_port_to_namespace', 'eth0', 'testns'] - - * ``veth`` - manipulates with eth and veth devices - - List of supported functions: - - * ``add_veth_port port peer_port`` - adds a pair of veth ports named ``port`` and - ``peer_port`` - * ``del_veth_port port peer_port`` - deletes a veth port pair specified by ``port`` - and ``peer_port`` - * ``bring_up_eth_port eth_port [namespace]`` - brings up ``eth_port`` in (optional) - ``namespace`` - - Examples: - - .. code-block:: python - - ['veth', 'add_veth_port', 'veth', 'veth1'] - - ['veth', 'bring_up_eth_port', 'eth1'] - - * ``tools`` - provides a set of helper functions - - List of supported functions: - - * ``Assert condition`` - evaluates given ``condition`` and raises ``AssertionError`` - in case that condition is not ``True`` - * ``Eval expression`` - evaluates given expression as a python code and returns - its result - * ``Exec command [regex]`` - executes a shell command and filters its output by - (optional) regular expression - - Examples: - - .. code-block:: python - - ['tools', 'exec', 'numactl -H', 'available: ([0-9]+)'] - ['tools', 'assert', '#STEP[-1][0]>1'] - - * ``wait`` - is used for test case interruption. This object doesn't have - any functions. Once reached, vsperf will pause test execution and waits - for press of ``Enter key``. It can be used during testcase design - for debugging purposes. - - Examples: - - .. code-block:: python - - ['wait'] - -Test Macros ------------ - -Test profiles can include macros as part of the test step. Each step in the -profile may return a value such as a port name. Recall macros use #STEP to -indicate the recalled value inside the return structure. If the method the -test step calls returns a value it can be later recalled, for example: - -.. code-block:: python - - { - "Name": "vswitch_add_del_vport", - "Deployment": "clean", - "Description": "vSwitch - add and delete virtual port", - "TestSteps": [ - ['vswitch', 'add_switch', 'int_br0'], # STEP 0 - ['vswitch', 'add_vport', 'int_br0'], # STEP 1 - ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'], # STEP 2 - ['vswitch', 'del_switch', 'int_br0'], # STEP 3 - ] - } - -This test profile uses the vswitch add_vport method which returns a string -value of the port added. This is later called by the del_port method using the -name from step 1. - -It is also possible to use negative indexes in step macros. In that case -``#STEP[-1]`` will refer to the result from previous step, ``#STEP[-2]`` -will refer to result of step called before previous step, etc. It means, -that you could change ``STEP 2`` from previous example to achieve the same -functionality: - -.. code-block:: python - - ['vswitch', 'del_port', 'int_br0', '#STEP[-1][0]'], # STEP 2 - -Also commonly used steps can be created as a separate profile. - -.. code-block:: python - - STEP_VSWITCH_PVP_INIT = [ - ['vswitch', 'add_switch', 'int_br0'], # STEP 0 - ['vswitch', 'add_phy_port', 'int_br0'], # STEP 1 - ['vswitch', 'add_phy_port', 'int_br0'], # STEP 2 - ['vswitch', 'add_vport', 'int_br0'], # STEP 3 - ['vswitch', 'add_vport', 'int_br0'], # STEP 4 - ] - -This profile can then be used inside other testcases - -.. code-block:: python - - { - "Name": "vswitch_pvp", - "Deployment": "clean", - "Description": "vSwitch - configure switch and one vnf", - "TestSteps": STEP_VSWITCH_PVP_INIT + - [ - ['vnf', 'start'], - ['vnf', 'stop'], - ] + - STEP_VSWITCH_PVP_FINIT - } - -HelloWorld and other basic Testcases ------------------------------------- - -The following examples are for demonstration purposes. -You can run them by copying and pasting into the -conf/integration/01_testcases.conf file. -A command-line instruction is shown at the end of each -example. - -HelloWorld -^^^^^^^^^^ - -The first example is a HelloWorld testcase. -It simply creates a bridge with 2 physical ports, then sets up a flow to drop -incoming packets from the port that was instantiated at the STEP #1. -There's no interaction with the traffic generator. -Then the flow, the 2 ports and the bridge are deleted. -'add_phy_port' method creates a 'dpdk' type interface that will manage the -physical port. The string value returned is the port name that will be referred -by 'del_port' later on. - -.. code-block:: python - - { - "Name": "HelloWorld", - "Description": "My first testcase", - "Deployment": "clean", - "TestSteps": [ - ['vswitch', 'add_switch', 'int_br0'], # STEP 0 - ['vswitch', 'add_phy_port', 'int_br0'], # STEP 1 - ['vswitch', 'add_phy_port', 'int_br0'], # STEP 2 - ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \ - 'actions': ['drop'], 'idle_timeout': '0'}], - ['vswitch', 'del_flow', 'int_br0'], - ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'], - ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'], - ['vswitch', 'del_switch', 'int_br0'], - ] - - }, - -To run HelloWorld test: - - .. code-block:: console - - ./vsperf --conf-file user_settings.py --integration HelloWorld - -Specify a Flow by the IP address -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -The next example shows how to explicitly set up a flow by specifying a -destination IP address. -All packets received from the port created at STEP #1 that have a destination -IP address = 90.90.90.90 will be forwarded to the port created at the STEP #2. - -.. code-block:: python - - { - "Name": "p2p_rule_l3da", - "Description": "Phy2Phy with rule on L3 Dest Addr", - "Deployment": "clean", - "biDirectional": "False", - "TestSteps": [ - ['vswitch', 'add_switch', 'int_br0'], # STEP 0 - ['vswitch', 'add_phy_port', 'int_br0'], # STEP 1 - ['vswitch', 'add_phy_port', 'int_br0'], # STEP 2 - ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \ - 'dl_type': '0x0800', 'nw_dst': '90.90.90.90', \ - 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}], - ['trafficgen', 'send_traffic', \ - {'traffic_type' : 'rfc2544_continuous'}], - ['vswitch', 'dump_flows', 'int_br0'], # STEP 5 - ['vswitch', 'del_flow', 'int_br0'], # STEP 7 == del-flows - ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'], - ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'], - ['vswitch', 'del_switch', 'int_br0'], - ] - }, - -To run the test: - - .. code-block:: console - - ./vsperf --conf-file user_settings.py --integration p2p_rule_l3da - -Multistream feature -^^^^^^^^^^^^^^^^^^^ - -The next testcase uses the multistream feature. -The traffic generator will send packets with different UDP ports. -That is accomplished by using "Stream Type" and "MultiStream" keywords. -4 different flows are set to forward all incoming packets. - -.. code-block:: python - - { - "Name": "multistream_l4", - "Description": "Multistream on UDP ports", - "Deployment": "clean", - "Parameters": { - 'TRAFFIC' : { - "multistream": 4, - "stream_type": "L4", - }, - }, - "TestSteps": [ - ['vswitch', 'add_switch', 'int_br0'], # STEP 0 - ['vswitch', 'add_phy_port', 'int_br0'], # STEP 1 - ['vswitch', 'add_phy_port', 'int_br0'], # STEP 2 - # Setup Flows - ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \ - 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '0', \ - 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}], - ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \ - 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '1', \ - 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}], - ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \ - 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '2', \ - 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}], - ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \ - 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '3', \ - 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}], - # Send mono-dir traffic - ['trafficgen', 'send_traffic', \ - {'traffic_type' : 'rfc2544_continuous', \ - 'bidir' : 'False'}], - # Clean up - ['vswitch', 'del_flow', 'int_br0'], - ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'], - ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'], - ['vswitch', 'del_switch', 'int_br0'], - ] - }, - -To run the test: - - .. code-block:: console - - ./vsperf --conf-file user_settings.py --integration multistream_l4 - -PVP with a VM Replacement -^^^^^^^^^^^^^^^^^^^^^^^^^ - -This example launches a 1st VM in a PVP topology, then the VM is replaced -by another VM. -When VNF setup parameter in ./conf/04_vnf.conf is "QemuDpdkVhostUser" -'add_vport' method creates a 'dpdkvhostuser' type port to connect a VM. - -.. code-block:: python - - { - "Name": "ex_replace_vm", - "Description": "PVP with VM replacement", - "Deployment": "clean", - "TestSteps": [ - ['vswitch', 'add_switch', 'int_br0'], # STEP 0 - ['vswitch', 'add_phy_port', 'int_br0'], # STEP 1 - ['vswitch', 'add_phy_port', 'int_br0'], # STEP 2 - ['vswitch', 'add_vport', 'int_br0'], # STEP 3 vm1 - ['vswitch', 'add_vport', 'int_br0'], # STEP 4 - - # Setup Flows - ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \ - 'actions': ['output:#STEP[3][1]'], 'idle_timeout': '0'}], - ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[4][1]', \ - 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}], - ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[2][1]', \ - 'actions': ['output:#STEP[4][1]'], 'idle_timeout': '0'}], - ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[3][1]', \ - 'actions': ['output:#STEP[1][1]'], 'idle_timeout': '0'}], - - # Start VM 1 - ['vnf1', 'start'], - # Now we want to replace VM 1 with another VM - ['vnf1', 'stop'], - - ['vswitch', 'add_vport', 'int_br0'], # STEP 11 vm2 - ['vswitch', 'add_vport', 'int_br0'], # STEP 12 - ['vswitch', 'del_flow', 'int_br0'], - ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \ - 'actions': ['output:#STEP[11][1]'], 'idle_timeout': '0'}], - ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[12][1]', \ - 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}], - - # Start VM 2 - ['vnf2', 'start'], - ['vnf2', 'stop'], - ['vswitch', 'dump_flows', 'int_br0'], - - # Clean up - ['vswitch', 'del_flow', 'int_br0'], - ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'], - ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'], - ['vswitch', 'del_port', 'int_br0', '#STEP[3][0]'], # vm1 - ['vswitch', 'del_port', 'int_br0', '#STEP[4][0]'], - ['vswitch', 'del_port', 'int_br0', '#STEP[11][0]'], # vm2 - ['vswitch', 'del_port', 'int_br0', '#STEP[12][0]'], - ['vswitch', 'del_switch', 'int_br0'], - ] - }, - -To run the test: - - .. code-block:: console - - ./vsperf --conf-file user_settings.py --integration ex_replace_vm - -VM with a Linux bridge -^^^^^^^^^^^^^^^^^^^^^^ - -This example setups a PVP topology and routes traffic to the VM based on -the destination IP address. A command-line parameter is used to select a Linux -bridge as a guest loopback application. It is also possible to select a guest -loopback application by a configuration option ``GUEST_LOOPBACK``. - -.. code-block:: python - - { - "Name": "ex_pvp_rule_l3da", - "Description": "PVP with flow on L3 Dest Addr", - "Deployment": "clean", - "TestSteps": [ - ['vswitch', 'add_switch', 'int_br0'], # STEP 0 - ['vswitch', 'add_phy_port', 'int_br0'], # STEP 1 - ['vswitch', 'add_phy_port', 'int_br0'], # STEP 2 - ['vswitch', 'add_vport', 'int_br0'], # STEP 3 vm1 - ['vswitch', 'add_vport', 'int_br0'], # STEP 4 - # Setup Flows - ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \ - 'dl_type': '0x0800', 'nw_dst': '90.90.90.90', \ - 'actions': ['output:#STEP[3][1]'], 'idle_timeout': '0'}], - # Each pkt from the VM is forwarded to the 2nd dpdk port - ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[4][1]', \ - 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}], - # Start VMs - ['vnf1', 'start'], - ['trafficgen', 'send_traffic', \ - {'traffic_type' : 'rfc2544_continuous', \ - 'bidir' : 'False'}], - ['vnf1', 'stop'], - # Clean up - ['vswitch', 'dump_flows', 'int_br0'], # STEP 10 - ['vswitch', 'del_flow', 'int_br0'], # STEP 11 - ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'], - ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'], - ['vswitch', 'del_port', 'int_br0', '#STEP[3][0]'], # vm1 ports - ['vswitch', 'del_port', 'int_br0', '#STEP[4][0]'], - ['vswitch', 'del_switch', 'int_br0'], - ] - }, - -To run the test: - - .. code-block:: console - - ./vsperf --conf-file user_settings.py --test-params \ - "GUEST_LOOPBACK=['linux_bridge']" --integration ex_pvp_rule_l3da - -Forward packets based on UDP port -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -This examples launches 2 VMs connected in parallel. -Incoming packets will be forwarded to one specific VM depending on the -destination UDP port. - -.. code-block:: python - - { - "Name": "ex_2pvp_rule_l4dp", - "Description": "2 PVP with flows on L4 Dest Port", - "Deployment": "clean", - "Parameters": { - 'TRAFFIC' : { - "multistream": 2, - "stream_type": "L4", - }, - }, - "TestSteps": [ - ['vswitch', 'add_switch', 'int_br0'], # STEP 0 - ['vswitch', 'add_phy_port', 'int_br0'], # STEP 1 - ['vswitch', 'add_phy_port', 'int_br0'], # STEP 2 - ['vswitch', 'add_vport', 'int_br0'], # STEP 3 vm1 - ['vswitch', 'add_vport', 'int_br0'], # STEP 4 - ['vswitch', 'add_vport', 'int_br0'], # STEP 5 vm2 - ['vswitch', 'add_vport', 'int_br0'], # STEP 6 - # Setup Flows to reply ICMPv6 and similar packets, so to - # avoid flooding internal port with their re-transmissions - ['vswitch', 'add_flow', 'int_br0', \ - {'priority': '1', 'dl_src': '00:00:00:00:00:01', \ - 'actions': ['output:#STEP[3][1]'], 'idle_timeout': '0'}], - ['vswitch', 'add_flow', 'int_br0', \ - {'priority': '1', 'dl_src': '00:00:00:00:00:02', \ - 'actions': ['output:#STEP[4][1]'], 'idle_timeout': '0'}], - ['vswitch', 'add_flow', 'int_br0', \ - {'priority': '1', 'dl_src': '00:00:00:00:00:03', \ - 'actions': ['output:#STEP[5][1]'], 'idle_timeout': '0'}], - ['vswitch', 'add_flow', 'int_br0', \ - {'priority': '1', 'dl_src': '00:00:00:00:00:04', \ - 'actions': ['output:#STEP[6][1]'], 'idle_timeout': '0'}], - # Forward UDP packets depending on dest port - ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \ - 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '0', \ - 'actions': ['output:#STEP[3][1]'], 'idle_timeout': '0'}], - ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \ - 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '1', \ - 'actions': ['output:#STEP[5][1]'], 'idle_timeout': '0'}], - # Send VM output to phy port #2 - ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[4][1]', \ - 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}], - ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[6][1]', \ - 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}], - # Start VMs - ['vnf1', 'start'], # STEP 16 - ['vnf2', 'start'], # STEP 17 - ['trafficgen', 'send_traffic', \ - {'traffic_type' : 'rfc2544_continuous', \ - 'bidir' : 'False'}], - ['vnf1', 'stop'], - ['vnf2', 'stop'], - ['vswitch', 'dump_flows', 'int_br0'], - # Clean up - ['vswitch', 'del_flow', 'int_br0'], - ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'], - ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'], - ['vswitch', 'del_port', 'int_br0', '#STEP[3][0]'], # vm1 ports - ['vswitch', 'del_port', 'int_br0', '#STEP[4][0]'], - ['vswitch', 'del_port', 'int_br0', '#STEP[5][0]'], # vm2 ports - ['vswitch', 'del_port', 'int_br0', '#STEP[6][0]'], - ['vswitch', 'del_switch', 'int_br0'], - ] - }, - -To run the test: - - .. code-block:: console - - ./vsperf --conf-file user_settings.py --integration ex_2pvp_rule_l4dp - -Modification of existing PVVP deployment -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -This is an example of modification of a standard deployment scenario with additional TestSteps. -Standard PVVP scenario is used to configure a vSwitch and to deploy two VNFs connected -in series. Additional TestSteps will deploy a 3rd VNF and connect it in parallel to -already configured VNFs. Traffic generator is instructed (by Multistream feature) to send -two separate traffic streams. One stream will be sent to the standalone VNF and second -to two chained VNFs. - -In case, that test is defined as a performance test, then traffic results will be collected -and available in both csv and rst report files. - -.. code-block:: python - - { - "Name": "pvvp_pvp_cont", - "Deployment": "pvvp", - "Description": "PVVP and PVP in parallel with Continuous Stream", - "Parameters" : { - "TRAFFIC" : { - "traffic_type" : "rfc2544_continuous", - "multistream": 2, - }, - }, - "TestSteps": [ - ['vswitch', 'add_vport', 'br0'], - ['vswitch', 'add_vport', 'br0'], - # priority must be higher than default 32768, otherwise flows won't match - ['vswitch', 'add_flow', 'br0', - {'in_port': '1', 'actions': ['output:#STEP[-2][1]'], 'idle_timeout': '0', 'dl_type':'0x0800', - 'nw_proto':'17', 'tp_dst':'0', 'priority': '33000'}], - ['vswitch', 'add_flow', 'br0', - {'in_port': '2', 'actions': ['output:#STEP[-2][1]'], 'idle_timeout': '0', 'dl_type':'0x0800', - 'nw_proto':'17', 'tp_dst':'0', 'priority': '33000'}], - ['vswitch', 'add_flow', 'br0', {'in_port': '#STEP[-4][1]', 'actions': ['output:1'], - 'idle_timeout': '0'}], - ['vswitch', 'add_flow', 'br0', {'in_port': '#STEP[-4][1]', 'actions': ['output:2'], - 'idle_timeout': '0'}], - ['vswitch', 'dump_flows', 'br0'], - ['vnf1', 'start'], - ] - }, - -To run the test: - - .. code-block:: console - - ./vsperf --conf-file user_settings.py pvvp_pvp_cont - diff --git a/docs/testing/user/userguide/testusage.rst b/docs/testing/user/userguide/testusage.rst deleted file mode 100644 index c6037aaf..00000000 --- a/docs/testing/user/userguide/testusage.rst +++ /dev/null @@ -1,848 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, Intel Corporation, AT&T and others. - -vSwitchPerf test suites userguide ---------------------------------- - -General -^^^^^^^ - -VSPERF requires a traffic generators to run tests, automated traffic gen -support in VSPERF includes: - -- IXIA traffic generator (IxNetwork hardware) and a machine that runs the IXIA - client software. -- Spirent traffic generator (TestCenter hardware chassis or TestCenter virtual - in a VM) and a VM to run the Spirent Virtual Deployment Service image, - formerly known as "Spirent LabServer". -- Xena Network traffic generator (Xena hardware chassis) that houses the Xena - Traffic generator modules. -- Moongen software traffic generator. Requires a separate machine running - moongen to execute packet generation. - -If you want to use another traffic generator, please select the :ref:`trafficgen-dummy` -generator. - -VSPERF Installation -^^^^^^^^^^^^^^^^^^^ - -To see the supported Operating Systems, vSwitches and system requirements, -please follow the `installation instructions `. - -Traffic Generator Setup -^^^^^^^^^^^^^^^^^^^^^^^ - -Follow the `Traffic generator instructions ` to -install and configure a suitable traffic generator. - -Cloning and building src dependencies -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -In order to run VSPERF, you will need to download DPDK and OVS. You can -do this manually and build them in a preferred location, OR you could -use vswitchperf/src. The vswitchperf/src directory contains makefiles -that will allow you to clone and build the libraries that VSPERF depends -on, such as DPDK and OVS. To clone and build simply: - -.. code-block:: console - - $ cd src - $ make - -VSPERF can be used with stock OVS (without DPDK support). When build -is finished, the libraries are stored in src_vanilla directory. - -The 'make' builds all options in src: - -* Vanilla OVS -* OVS with vhost_user as the guest access method (with DPDK support) - -The vhost_user build will reside in src/ovs/ -The Vanilla OVS build will reside in vswitchperf/src_vanilla - -To delete a src subdirectory and its contents to allow you to re-clone simply -use: - -.. code-block:: console - - $ make clobber - -Configure the ``./conf/10_custom.conf`` file -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -The ``10_custom.conf`` file is the configuration file that overrides -default configurations in all the other configuration files in ``./conf`` -The supplied ``10_custom.conf`` file **MUST** be modified, as it contains -configuration items for which there are no reasonable default values. - -The configuration items that can be added is not limited to the initial -contents. Any configuration item mentioned in any .conf file in -``./conf`` directory can be added and that item will be overridden by -the custom configuration value. - -Further details about configuration files evaluation and special behaviour -of options with ``GUEST_`` prefix could be found at :ref:`design document -`. - -Using a custom settings file -^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -If your ``10_custom.conf`` doesn't reside in the ``./conf`` directory -of if you want to use an alternative configuration file, the file can -be passed to ``vsperf`` via the ``--conf-file`` argument. - -.. code-block:: console - - $ ./vsperf --conf-file ... - -Note that configuration passed in via the environment (``--load-env``) -or via another command line argument will override both the default and -your custom configuration files. This "priority hierarchy" can be -described like so (1 = max priority): - -1. Testcase definition section ``Parameters`` -2. Command line arguments -3. Environment variables -4. Configuration file(s) - -Further details about configuration files evaluation and special behaviour -of options with ``GUEST_`` prefix could be found at :ref:`design document -`. - -.. _overriding-parameters-documentation: - -Overriding values defined in configuration files -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -The configuration items can be overridden by command line argument -``--test-params``. In this case, the configuration items and -their values should be passed in form of ``item=value`` and separated -by semicolon. - -Example: - -.. code:: console - - $ ./vsperf --test-params "TRAFFICGEN_DURATION=10;TRAFFICGEN_PKT_SIZES=(128,);" \ - "GUEST_LOOPBACK=['testpmd','l2fwd']" pvvp_tput - -The second option is to override configuration items by ``Parameters`` section -of the test case definition. The configuration items can be added into ``Parameters`` -dictionary with their new values. These values will override values defined in -configuration files or specified by ``--test-params`` command line argument. - -Example: - -.. code:: python - - "Parameters" : {'TRAFFICGEN_PKT_SIZES' : (128,), - 'TRAFFICGEN_DURATION' : 10, - 'GUEST_LOOPBACK' : ['testpmd','l2fwd'], - } - -**NOTE:** In both cases, configuration item names and their values must be specified -in the same form as they are defined inside configuration files. Parameter names -must be specified in uppercase and data types of original and new value must match. -Python syntax rules related to data types and structures must be followed. -For example, parameter ``TRAFFICGEN_PKT_SIZES`` above is defined as a tuple -with a single value ``128``. In this case trailing comma is mandatory, otherwise -value can be wrongly interpreted as a number instead of a tuple and vsperf -execution would fail. Please check configuration files for default values and their -types and use them as a basis for any customized values. In case of any doubt, please -check official python documentation related to data structures like tuples, lists -and dictionaries. - -**NOTE:** Vsperf execution will terminate with runtime error in case, that unknown -parameter name is passed via ``--test-params`` CLI argument or defined in ``Parameters`` -section of test case definition. It is also forbidden to redefine a value of -``TEST_PARAMS`` configuration item via CLI or ``Parameters`` section. - -vloop_vnf -^^^^^^^^^ - -VSPERF uses a VM image called vloop_vnf for looping traffic in the deployment -scenarios involving VMs. The image can be downloaded from -``__. - -Please see the installation instructions for information on :ref:`vloop-vnf` -images. - -.. _l2fwd-module: - -l2fwd Kernel Module -^^^^^^^^^^^^^^^^^^^ - -A Kernel Module that provides OSI Layer 2 Ipv4 termination or forwarding with -support for Destination Network Address Translation (DNAT) for both the MAC and -IP addresses. l2fwd can be found in /src/l2fwd - -Executing tests -^^^^^^^^^^^^^^^ - -All examples inside these docs assume, that user is inside the VSPERF -directory. VSPERF can be executed from any directory. - -Before running any tests make sure you have root permissions by adding -the following line to /etc/sudoers: - -.. code-block:: console - - username ALL=(ALL) NOPASSWD: ALL - -username in the example above should be replaced with a real username. - -To list the available tests: - -.. code-block:: console - - $ ./vsperf --list - -To run a single test: - -.. code-block:: console - - $ ./vsperf $TESTNAME - -Where $TESTNAME is the name of the vsperf test you would like to run. - -To run a group of tests, for example all tests with a name containing -'RFC2544': - -.. code-block:: console - - $ ./vsperf --conf-file=/10_custom.conf --tests="RFC2544" - -To run all tests: - -.. code-block:: console - - $ ./vsperf --conf-file=/10_custom.conf - -Some tests allow for configurable parameters, including test duration -(in seconds) as well as packet sizes (in bytes). - -.. code:: bash - - $ ./vsperf --conf-file user_settings.py \ - --tests RFC2544Tput \ - --test-params "TRAFFICGEN_DURATION=10;TRAFFICGEN_PKT_SIZES=(128,)" - -For all available options, check out the help dialog: - -.. code-block:: console - - $ ./vsperf --help - -Executing Vanilla OVS tests -^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -1. If needed, recompile src for all OVS variants - - .. code-block:: console - - $ cd src - $ make distclean - $ make - -2. Update your ``10_custom.conf`` file to use Vanilla OVS: - - .. code-block:: python - - VSWITCH = 'OvsVanilla' - -3. Run test: - - .. code-block:: console - - $ ./vsperf --conf-file= - - Please note if you don't want to configure Vanilla OVS through the - configuration file, you can pass it as a CLI argument. - - .. code-block:: console - - $ ./vsperf --vswitch OvsVanilla - - -Executing tests with VMs -^^^^^^^^^^^^^^^^^^^^^^^^ - -To run tests using vhost-user as guest access method: - -1. Set VHOST_METHOD and VNF of your settings file to: - - .. code-block:: python - - VSWITCH = 'OvsDpdkVhost' - VNF = 'QemuDpdkVhost' - -2. If needed, recompile src for all OVS variants - - .. code-block:: console - - $ cd src - $ make distclean - $ make - -3. Run test: - - .. code-block:: console - - $ ./vsperf --conf-file=/10_custom.conf - -Executing tests with VMs using Vanilla OVS -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -To run tests using Vanilla OVS: - -1. Set the following variables: - - .. code-block:: python - - VSWITCH = 'OvsVanilla' - VNF = 'QemuVirtioNet' - - VANILLA_TGEN_PORT1_IP = n.n.n.n - VANILLA_TGEN_PORT1_MAC = nn:nn:nn:nn:nn:nn - - VANILLA_TGEN_PORT2_IP = n.n.n.n - VANILLA_TGEN_PORT2_MAC = nn:nn:nn:nn:nn:nn - - VANILLA_BRIDGE_IP = n.n.n.n - - or use ``--test-params`` option - - .. code-block:: console - - $ ./vsperf --conf-file=/10_custom.conf \ - --test-params "VANILLA_TGEN_PORT1_IP=n.n.n.n;" \ - "VANILLA_TGEN_PORT1_MAC=nn:nn:nn:nn:nn:nn;" \ - "VANILLA_TGEN_PORT2_IP=n.n.n.n;" \ - "VANILLA_TGEN_PORT2_MAC=nn:nn:nn:nn:nn:nn" - -2. If needed, recompile src for all OVS variants - - .. code-block:: console - - $ cd src - $ make distclean - $ make - -3. Run test: - - .. code-block:: console - - $ ./vsperf --conf-file/10_custom.conf - -.. _vpp-test: - -Executing VPP tests -^^^^^^^^^^^^^^^^^^^ - -Currently it is not possible to use standard scenario deployments for execution of -tests with VPP. It means, that deployments ``p2p``, ``pvp``, ``pvvp`` and in general any -:ref:`pxp-deployment` won't work with VPP. However it is possible to use VPP in -:ref:`step-driven-tests`. A basic set of VPP testcases covering ``phy2phy``, ``pvp`` -and ``pvvp`` tests are already prepared. - -List of performance tests with VPP support follows: - -* phy2phy_tput_vpp: VPP: LTD.Throughput.RFC2544.PacketLossRatio -* phy2phy_cont_vpp: VPP: Phy2Phy Continuous Stream -* phy2phy_back2back_vpp: VPP: LTD.Throughput.RFC2544.BackToBackFrames -* pvp_tput_vpp: VPP: LTD.Throughput.RFC2544.PacketLossRatio -* pvp_cont_vpp: VPP: PVP Continuous Stream -* pvp_back2back_vpp: VPP: LTD.Throughput.RFC2544.BackToBackFrames -* pvvp_tput_vpp: VPP: LTD.Throughput.RFC2544.PacketLossRatio -* pvvp_cont_vpp: VPP: PVP Continuous Stream -* pvvp_back2back_vpp: VPP: LTD.Throughput.RFC2544.BackToBackFrames - -In order to execute testcases with VPP it is required to: - -* install VPP manually, see :ref:`vpp-installation` -* configure ``WHITELIST_NICS``, with two physical NICs connected to the traffic generator -* configure traffic generator, see :ref:`trafficgen-installation` - -After that it is possible to execute VPP testcases listed above. - -For example: - -.. code-block:: console - - $ ./vsperf --conf-file= phy2phy_tput_vpp - -.. _vfio-pci: - -Using vfio_pci with DPDK -^^^^^^^^^^^^^^^^^^^^^^^^^ - -To use vfio with DPDK instead of igb_uio add into your custom configuration -file the following parameter: - -.. code-block:: python - - PATHS['dpdk']['src']['modules'] = ['uio', 'vfio-pci'] - - -**NOTE:** In case, that DPDK is installed from binary package, then please -set ``PATHS['dpdk']['bin']['modules']`` instead. - -**NOTE:** Please ensure that Intel VT-d is enabled in BIOS. - -**NOTE:** Please ensure your boot/grub parameters include -the following: - -.. code-block:: console - - iommu=pt intel_iommu=on - -To check that IOMMU is enabled on your platform: - -.. code-block:: console - - $ dmesg | grep IOMMU - [ 0.000000] Intel-IOMMU: enabled - [ 0.139882] dmar: IOMMU 0: reg_base_addr fbffe000 ver 1:0 cap d2078c106f0466 ecap f020de - [ 0.139888] dmar: IOMMU 1: reg_base_addr ebffc000 ver 1:0 cap d2078c106f0466 ecap f020de - [ 0.139893] IOAPIC id 2 under DRHD base 0xfbffe000 IOMMU 0 - [ 0.139894] IOAPIC id 0 under DRHD base 0xebffc000 IOMMU 1 - [ 0.139895] IOAPIC id 1 under DRHD base 0xebffc000 IOMMU 1 - [ 3.335744] IOMMU: dmar0 using Queued invalidation - [ 3.335746] IOMMU: dmar1 using Queued invalidation - .... - -.. _SRIOV-support: - -Using SRIOV support -^^^^^^^^^^^^^^^^^^^ - -To use virtual functions of NIC with SRIOV support, use extended form -of NIC PCI slot definition: - -.. code-block:: python - - WHITELIST_NICS = ['0000:05:00.0|vf0', '0000:05:00.1|vf3'] - -Where 'vf' is an indication of virtual function usage and following -number defines a VF to be used. In case that VF usage is detected, -then vswitchperf will enable SRIOV support for given card and it will -detect PCI slot numbers of selected VFs. - -So in example above, one VF will be configured for NIC '0000:05:00.0' -and four VFs will be configured for NIC '0000:05:00.1'. Vswitchperf -will detect PCI addresses of selected VFs and it will use them during -test execution. - -At the end of vswitchperf execution, SRIOV support will be disabled. - -SRIOV support is generic and it can be used in different testing scenarios. -For example: - -* vSwitch tests with DPDK or without DPDK support to verify impact - of VF usage on vSwitch performance -* tests without vSwitch, where traffic is forwared directly - between VF interfaces by packet forwarder (e.g. testpmd application) -* tests without vSwitch, where VM accesses VF interfaces directly - by PCI-passthrough_ to measure raw VM throughput performance. - -.. _PCI-passthrough: - -Using QEMU with PCI passthrough support -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -Raw virtual machine throughput performance can be measured by execution of PVP -test with direct access to NICs by PCI passthrough. To execute VM with direct -access to PCI devices, enable vfio-pci_. In order to use virtual functions, -SRIOV-support_ must be enabled. - -Execution of test with PCI passthrough with vswitch disabled: - -.. code-block:: console - - $ ./vsperf --conf-file=/10_custom.conf \ - --vswitch none --vnf QemuPciPassthrough pvp_tput - -Any of supported guest-loopback-application_ can be used inside VM with -PCI passthrough support. - -Note: Qemu with PCI passthrough support can be used only with PVP test -deployment. - -.. _guest-loopback-application: - -Selection of loopback application for tests with VMs -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -To select the loopback applications which will forward packets inside VMs, -the following parameter should be configured: - -.. code-block:: python - - GUEST_LOOPBACK = ['testpmd'] - -or use ``--test-params`` CLI argument: - -.. code-block:: console - - $ ./vsperf --conf-file=/10_custom.conf \ - --test-params "GUEST_LOOPBACK=['testpmd']" - -Supported loopback applications are: - -.. code-block:: console - - 'testpmd' - testpmd from dpdk will be built and used - 'l2fwd' - l2fwd module provided by Huawei will be built and used - 'linux_bridge' - linux bridge will be configured - 'buildin' - nothing will be configured by vsperf; VM image must - ensure traffic forwarding between its interfaces - -Guest loopback application must be configured, otherwise traffic -will not be forwarded by VM and testcases with VM related deployments -will fail. Guest loopback application is set to 'testpmd' by default. - -**NOTE:** In case that only 1 or more than 2 NICs are configured for VM, -then 'testpmd' should be used. As it is able to forward traffic between -multiple VM NIC pairs. - -**NOTE:** In case of linux_bridge, all guest NICs are connected to the same -bridge inside the guest. - -Mergable Buffers Options with QEMU -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -Mergable buffers can be disabled with VSPerf within QEMU. This option can -increase performance significantly when not using jumbo frame sized packets. -By default VSPerf disables mergable buffers. If you wish to enable it you -can modify the setting in the a custom conf file. - -.. code-block:: python - - GUEST_NIC_MERGE_BUFFERS_DISABLE = [False] - -Then execute using the custom conf file. - -.. code-block:: console - - $ ./vsperf --conf-file=/10_custom.conf - -Alternatively you can just pass the param during execution. - -.. code-block:: console - - $ ./vsperf --test-params "GUEST_NIC_MERGE_BUFFERS_DISABLE=[False]" - - -Selection of dpdk binding driver for tests with VMs -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -To select dpdk binding driver, which will specify which driver the vm NICs will -use for dpdk bind, the following configuration parameter should be configured: - -.. code-block:: console - - GUEST_DPDK_BIND_DRIVER = ['igb_uio_from_src'] - -The supported dpdk guest bind drivers are: - -.. code-block:: console - - 'uio_pci_generic' - Use uio_pci_generic driver - 'igb_uio_from_src' - Build and use the igb_uio driver from the dpdk src - files - 'vfio_no_iommu' - Use vfio with no iommu option. This requires custom - guest images that support this option. The default - vloop image does not support this driver. - -Note: uio_pci_generic does not support sr-iov testcases with guests attached. -This is because uio_pci_generic only supports legacy interrupts. In case -uio_pci_generic is selected with the vnf as QemuPciPassthrough it will be -modified to use igb_uio_from_src instead. - -Note: vfio_no_iommu requires kernels equal to or greater than 4.5 and dpdk -16.04 or greater. Using this option will also taint the kernel. - -Please refer to the dpdk documents at http://dpdk.org/doc/guides for more -information on these drivers. - -Multi-Queue Configuration -^^^^^^^^^^^^^^^^^^^^^^^^^ - -VSPerf currently supports multi-queue with the following limitations: - -1. Requires QEMU 2.5 or greater and any OVS version higher than 2.5. The - default upstream package versions installed by VSPerf satisfies this - requirement. - -2. Guest image must have ethtool utility installed if using l2fwd or linux - bridge inside guest for loopback. - -3. If using OVS versions 2.5.0 or less enable old style multi-queue as shown - in the ''02_vswitch.conf'' file. - - .. code-block:: python - - OVS_OLD_STYLE_MQ = True - -To enable multi-queue for dpdk modify the ''02_vswitch.conf'' file. - -.. code-block:: python - - VSWITCH_DPDK_MULTI_QUEUES = 2 - -**NOTE:** you should consider using the switch affinity to set a pmd cpu mask -that can optimize your performance. Consider the numa of the NIC in use if this -applies by checking /sys/class/net//device/numa_node and setting an -appropriate mask to create PMD threads on the same numa node. - -When multi-queue is enabled, each dpdk or dpdkvhostuser port that is created -on the switch will set the option for multiple queues. If old style multi queue -has been enabled a global option for multi queue will be used instead of the -port by port option. - -To enable multi-queue on the guest modify the ''04_vnf.conf'' file. - -.. code-block:: python - - GUEST_NIC_QUEUES = [2] - -Enabling multi-queue at the guest will add multiple queues to each NIC port when -qemu launches the guest. - -In case of Vanilla OVS, multi-queue is enabled on the tuntap ports and nic -queues will be enabled inside the guest with ethtool. Simply enabling the -multi-queue on the guest is sufficient for Vanilla OVS multi-queue. - -Testpmd should be configured to take advantage of multi-queue on the guest if -using DPDKVhostUser. This can be done by modifying the ''04_vnf.conf'' file. - -.. code-block:: python - - GUEST_TESTPMD_PARAMS = ['-l 0,1,2,3,4 -n 4 --socket-mem 512 -- ' - '--burst=64 -i --txqflags=0xf00 ' - '--nb-cores=4 --rxq=2 --txq=2 ' - '--disable-hw-vlan'] - -**NOTE:** The guest SMP cores must be configured to allow for testpmd to use the -optimal number of cores to take advantage of the multiple guest queues. - -In case of using Vanilla OVS and qemu virtio-net you can increase performance -by binding vhost-net threads to cpus. This can be done by enabling the affinity -in the ''04_vnf.conf'' file. This can be done to non multi-queue enabled -configurations as well as there will be 2 vhost-net threads. - -.. code-block:: python - - VSWITCH_VHOST_NET_AFFINITIZATION = True - - VSWITCH_VHOST_CPU_MAP = [4,5,8,11] - -**NOTE:** This method of binding would require a custom script in a real -environment. - -**NOTE:** For optimal performance guest SMPs and/or vhost-net threads should be -on the same numa as the NIC in use if possible/applicable. Testpmd should be -assigned at least (nb_cores +1) total cores with the cpu mask. - -Executing Packet Forwarding tests -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -To select the applications which will forward packets, -the following parameters should be configured: - -.. code-block:: python - - VSWITCH = 'none' - PKTFWD = 'TestPMD' - -or use ``--vswitch`` and ``--fwdapp`` CLI arguments: - -.. code-block:: console - - $ ./vsperf phy2phy_cont --conf-file user_settings.py \ - --vswitch none \ - --fwdapp TestPMD - -Supported Packet Forwarding applications are: - -.. code-block:: console - - 'testpmd' - testpmd from dpdk - - -1. Update your ''10_custom.conf'' file to use the appropriate variables - for selected Packet Forwarder: - - .. code-block:: python - - # testpmd configuration - TESTPMD_ARGS = [] - # packet forwarding mode supported by testpmd; Please see DPDK documentation - # for comprehensive list of modes supported by your version. - # e.g. io|mac|mac_retry|macswap|flowgen|rxonly|txonly|csum|icmpecho|... - # Note: Option "mac_retry" has been changed to "mac retry" since DPDK v16.07 - TESTPMD_FWD_MODE = 'csum' - # checksum calculation layer: ip|udp|tcp|sctp|outer-ip - TESTPMD_CSUM_LAYER = 'ip' - # checksum calculation place: hw (hardware) | sw (software) - TESTPMD_CSUM_CALC = 'sw' - # recognize tunnel headers: on|off - TESTPMD_CSUM_PARSE_TUNNEL = 'off' - -2. Run test: - - .. code-block:: console - - $ ./vsperf phy2phy_tput --conf-file - -Executing Packet Forwarding tests with one guest -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -TestPMD with DPDK 16.11 or greater can be used to forward packets as a switch to a single guest using TestPMD vdev -option. To set this configuration the following parameters should be used. - - .. code-block:: python - - VSWITCH = 'none' - PKTFWD = 'TestPMD' - -or use ``--vswitch`` and ``--fwdapp`` CLI arguments: - - .. code-block:: console - - $ ./vsperf pvp_tput --conf-file user_settings.py \ - --vswitch none \ - --fwdapp TestPMD - -Guest forwarding application only supports TestPMD in this configuration. - - .. code-block:: python - - GUEST_LOOPBACK = ['testpmd'] - -For optimal performance one cpu per port +1 should be used for TestPMD. Also set additional params for packet forwarding -application to use the correct number of nb-cores. - - .. code-block:: python - - DPDK_SOCKET_MEM = ['1024', '0'] - VSWITCHD_DPDK_ARGS = ['-l', '46,44,42,40,38', '-n', '4'] - TESTPMD_ARGS = ['--nb-cores=4', '--txq=1', '--rxq=1'] - -For guest TestPMD 3 VCpus should be assigned with the following TestPMD params. - - .. code-block:: python - - GUEST_TESTPMD_PARAMS = ['-l 0,1,2 -n 4 --socket-mem 1024 -- ' - '--burst=64 -i --txqflags=0xf00 ' - '--disable-hw-vlan --nb-cores=2 --txq=1 --rxq=1'] - -Execution of TestPMD can be run with the following command line - - .. code-block:: console - - ./vsperf pvp_tput --vswitch=none --fwdapp=TestPMD --conf-file - -**NOTE:** To achieve the best 0% loss numbers with rfc2544 throughput testing, other tunings should be applied to host -and guest such as tuned profiles and CPU tunings to prevent possible interrupts to worker threads. - -VSPERF modes of operation -^^^^^^^^^^^^^^^^^^^^^^^^^ - -VSPERF can be run in different modes. By default it will configure vSwitch, -traffic generator and VNF. However it can be used just for configuration -and execution of traffic generator. Another option is execution of all -components except traffic generator itself. - -Mode of operation is driven by configuration parameter -m or --mode - -.. code-block:: console - - -m MODE, --mode MODE vsperf mode of operation; - Values: - "normal" - execute vSwitch, VNF and traffic generator - "trafficgen" - execute only traffic generator - "trafficgen-off" - execute vSwitch and VNF - "trafficgen-pause" - execute vSwitch and VNF but wait before traffic transmission - -In case, that VSPERF is executed in "trafficgen" mode, then configuration -of traffic generator can be modified through ``TRAFFIC`` dictionary passed to the -``--test-params`` option. It is not needed to specify all values of ``TRAFFIC`` -dictionary. It is sufficient to specify only values, which should be changed. -Detailed description of ``TRAFFIC`` dictionary can be found at -:ref:`configuration-of-traffic-dictionary`. - -Example of execution of VSPERF in "trafficgen" mode: - -.. code-block:: console - - $ ./vsperf -m trafficgen --trafficgen IxNet --conf-file vsperf.conf \ - --test-params "TRAFFIC={'traffic_type':'rfc2544_continuous','bidir':'False','framerate':60}" - -Code change verification by pylint -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -Every developer participating in VSPERF project should run -pylint before his python code is submitted for review. Project -specific configuration for pylint is available at 'pylint.rc'. - -Example of manual pylint invocation: - -.. code-block:: console - - $ pylint --rcfile ./pylintrc ./vsperf - -GOTCHAs: -^^^^^^^^ - -Custom image fails to boot -~~~~~~~~~~~~~~~~~~~~~~~~~~ - -Using custom VM images may not boot within VSPerf pxp testing because of -the drive boot and shared type which could be caused by a missing scsi -driver inside the image. In case of issues you can try changing the drive -boot type to ide. - -.. code-block:: python - - GUEST_BOOT_DRIVE_TYPE = ['ide'] - GUEST_SHARED_DRIVE_TYPE = ['ide'] - -OVS with DPDK and QEMU -~~~~~~~~~~~~~~~~~~~~~~~ - -If you encounter the following error: "before (last 100 chars): -'-path=/dev/hugepages,share=on: unable to map backing store for -hugepages: Cannot allocate memory\r\n\r\n" during qemu initialization, -check the amount of hugepages on your system: - -.. code-block:: console - - $ cat /proc/meminfo | grep HugePages - - -By default the vswitchd is launched with 1Gb of memory, to change -this, modify --socket-mem parameter in conf/02_vswitch.conf to allocate -an appropriate amount of memory: - -.. code-block:: python - - DPDK_SOCKET_MEM = ['1024', '0'] - VSWITCHD_DPDK_ARGS = ['-c', '0x4', '-n', '4'] - VSWITCHD_DPDK_CONFIG = { - 'dpdk-init' : 'true', - 'dpdk-lcore-mask' : '0x4', - 'dpdk-socket-mem' : '1024,0', - } - -Note: Option ``VSWITCHD_DPDK_ARGS`` is used for vswitchd, which supports ``--dpdk`` -parameter. In recent vswitchd versions, option ``VSWITCHD_DPDK_CONFIG`` will be -used to configure vswitchd via ``ovs-vsctl`` calls. - - -More information -^^^^^^^^^^^^^^^^ - -For more information and details refer to the rest of vSwitchPerfuser documentation. - diff --git a/docs/testing/user/userguide/yardstick.rst b/docs/testing/user/userguide/yardstick.rst deleted file mode 100644 index b5e5c72d..00000000 --- a/docs/testing/user/userguide/yardstick.rst +++ /dev/null @@ -1,250 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, Intel Corporation, AT&T and others. - -Execution of vswitchperf testcases by Yardstick ------------------------------------------------ - -General -^^^^^^^ - -Yardstick is a generic framework for a test execution, which is used for -validation of installation of OPNFV platform. In the future, Yardstick will -support two options of vswitchperf testcase execution: - -- plugin mode, which will execute native vswitchperf testcases; Tests will - be executed natively by vsperf, and test results will be processed and - reported by yardstick. -- traffic generator mode, which will run vswitchperf in **trafficgen** - mode only; Yardstick framework will be used to launch VNFs and to configure - flows to ensure, that traffic is properly routed. This mode will allow to - test OVS performance in real world scenarios. - -In Colorado release only the traffic generator mode is supported. - -Yardstick Installation -^^^^^^^^^^^^^^^^^^^^^^ - -In order to run Yardstick testcases, you will need to prepare your test -environment. Please follow the `installation instructions -`__ -to install the yardstick. - -Please note, that yardstick uses OpenStack for execution of testcases. -OpenStack must be installed with Heat and Neutron services. Otherwise -vswitchperf testcases cannot be executed. - -VM image with vswitchperf -^^^^^^^^^^^^^^^^^^^^^^^^^ - -A special VM image is required for execution of vswitchperf specific testcases -by yardstick. It is possible to use a sample VM image available at OPNFV -artifactory or to build customized image. - -Sample VM image with vswitchperf -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -Sample VM image is available at vswitchperf section of OPNFV artifactory -for free download: - -.. code-block:: console - - $ wget http://artifacts.opnfv.org/vswitchperf/vnf/vsperf-yardstick-image.qcow2 - -This image can be used for execution of sample testcases with dummy traffic -generator. - -**NOTE:** Traffic generators might require an installation of client software. -This software is not included in the sample image and must be installed by user. - -**NOTE:** This image will be updated only in case, that new features related -to yardstick integration will be added to the vswitchperf. - -Preparation of custom VM image -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -In general, any Linux distribution supported by vswitchperf can be used as -a base image for vswitchperf. One of the possibilities is to modify vloop-vnf -image, which can be downloaded from ``__ -(see :ref:`vloop-vnf`). - -Please follow the :ref:`vsperf-installation` to -install vswitchperf inside vloop-vnf image. As vswitchperf will be run in -trafficgen mode, it is possible to skip installation and compilation of OVS, -QEMU and DPDK to keep image size smaller. - -In case, that selected traffic generator requires installation of additional -client software, please follow appropriate documentation. For example in case -of IXIA, you would need to install IxOS and IxNetowrk TCL API. - -VM image usage -~~~~~~~~~~~~~~ - -Image with vswitchperf must be uploaded into the glance service and -vswitchperf specific flavor configured, e.g.: - -.. code-block:: console - - $ glance --os-username admin --os-image-api-version 1 image-create --name \ - vsperf --is-public true --disk-format qcow2 --container-format bare --file \ - vsperf-yardstick-image.qcow2 - - $ nova --os-username admin flavor-create vsperf-flavor 100 2048 25 1 - -Testcase execution -^^^^^^^^^^^^^^^^^^ - -After installation, yardstick is available as python package within yardstick -specific virtual environment. It means, that yardstick environment must be -enabled before the test execution, e.g.: - -.. code-block:: console - - source ~/yardstick_venv/bin/activate - - -Next step is configuration of OpenStack environment, e.g. in case of devstack: - -.. code-block:: console - - source /opt/openstack/devstack/openrc - export EXTERNAL_NETWORK=public - -Vswitchperf testcases executable by yardstick are located at vswitchperf -repository inside ``yardstick/tests`` directory. Example of their download -and execution follows: - -.. code-block:: console - - git clone https://gerrit.opnfv.org/gerrit/vswitchperf - cd vswitchperf - - yardstick -d task start yardstick/tests/rfc2544_throughput_dummy.yaml - -**NOTE:** Optional argument ``-d`` shows debug output. - -Testcase customization -^^^^^^^^^^^^^^^^^^^^^^ - -Yardstick testcases are described by YAML files. vswitchperf specific testcases -are part of the vswitchperf repository and their yaml files can be found at -``yardstick/tests`` directory. For detailed description of yaml file structure, -please see yardstick documentation and testcase samples. Only vswitchperf specific -parts will be discussed here. - -Example of yaml file: - -.. code-block:: yaml - - ... - scenarios: - - - type: Vsperf - options: - testname: 'p2p_rfc2544_throughput' - trafficgen_port1: 'eth1' - trafficgen_port2: 'eth3' - external_bridge: 'br-ex' - test_params: 'TRAFFICGEN_DURATION=30;TRAFFIC={'traffic_type':'rfc2544_throughput}' - conf_file: '~/vsperf-yardstick.conf' - - host: vsperf.demo - - runner: - type: Sequence - scenario_option_name: frame_size - sequence: - - 64 - - 128 - - 512 - - 1024 - - 1518 - sla: - metrics: 'throughput_rx_fps' - throughput_rx_fps: 500000 - action: monitor - - context: - ... - -Section option -~~~~~~~~~~~~~~ - -Section **option** defines details of vswitchperf test scenario. Lot of options -are identical to the vswitchperf parameters passed through ``--test-params`` -argument. Following options are supported: - -- **frame_size** - a packet size for which test should be executed; - Multiple packet sizes can be tested by modification of Sequence runner - section inside YAML definition. Default: '64' -- **conf_file** - sets path to the vswitchperf configuration file, which will be - uploaded to VM; Default: '~/vsperf-yardstick.conf' -- **setup_script** - sets path to the setup script, which will be executed - during setup and teardown phases -- **trafficgen_port1** - specifies device name of 1st interface connected to - the trafficgen -- **trafficgen_port2** - specifies device name of 2nd interface connected to - the trafficgen -- **external_bridge** - specifies name of external bridge configured in OVS; - Default: 'br-ex' -- **test_params** - specifies a string with a list of vsperf configuration - parameters, which will be passed to the ``--test-params`` CLI argument; - Parameters should be stated in the form of ``param=value`` and separated - by a semicolon. Configuration of traffic generator is driven by ``TRAFFIC`` - dictionary, which can be also updated by values defined by ``test_params``. - Please check VSPERF documentation for details about available configuration - parameters and their data types. - In case that both **test_params** and **conf_file** are specified, - then values from **test_params** will override values defined - in the configuration file. - -In case that **trafficgen_port1** and/or **trafficgen_port2** are defined, then -these interfaces will be inserted into the **external_bridge** of OVS. It is -expected, that OVS runs at the same node, where the testcase is executed. In case -of more complex OpenStack installation or a need of additional OVS configuration, -**setup_script** can be used. - -**NOTE** It is essential to specify a configuration for selected traffic generator. -In case, that standalone testcase is created, then traffic generator can be -selected and configured directly in YAML file by **test_params**. On the other -hand, if multiple testcases should be executed with the same traffic generator -settings, then a customized configuration file should be prepared and its name -passed by **conf_file** option. - -Section runner -~~~~~~~~~~~~~~ - -Yardstick supports several `runner types -`__. -In case of vswitchperf specific TCs, **Sequence** runner type can be used to -execute the testcase for given list of frame sizes. - - -Section sla -~~~~~~~~~~~ - -In case that sla section is not defined, then testcase will be always -considered as successful. On the other hand, it is possible to define a set of -test metrics and their minimal values to evaluate test success. Any numeric -value, reported by vswitchperf inside CSV result file, can be used. -Multiple metrics can be defined as a coma separated list of items. Minimal -value must be set separately for each metric. - -e.g.: - -.. code-block:: yaml - - sla: - metrics: 'throughput_rx_fps,throughput_rx_mbps' - throughput_rx_fps: 500000 - throughput_rx_mbps: 1000 - -In case that any of defined metrics will be lower than defined value, then -testcase will be marked as failed. Based on ``action`` policy, yardstick -will either stop test execution (value ``assert``) or it will run next test -(value ``monitor``). - -**NOTE** The throughput SLA (or any other SLA) cannot be set to a meaningful -value without knowledge of the server and networking environment, possibly -including prior testing in that environment to establish a baseline SLA level -under well-understood circumstances. -- cgit 1.2.3-korg