From ea4376cb3c89f4e3605d7f48036fd61325a52fcf Mon Sep 17 00:00:00 2001 From: Martin Klozik Date: Thu, 26 Jan 2017 15:08:11 +0000 Subject: docs: Remove hyperlinks to docs in artifacts It is possible to use sphinx cross referencing feature in case, that only one level of toctree is used. Thus documentation was reorganized to utilize just one top level index with toctree. After that it was possible to use rst native syntax to create a cross links among vsperf documentation chapters. As a result only 2 hyperlinks to the yardstick documentation are version specific. JIRA: VSPERF-442 Change-Id: I15c2f53922e88765506448de61af4a299f5d53c5 Signed-off-by: Martin Klozik Reviewed-by: Al Morton Reviewed-by: Christian Trautman Reviewed-by: Bill Michalowski Reviewed-by: Antonio Fischetti Reviewed-by: Sridhar Rao Reviewed-by: Martin Goldammer Reviewed-by: Trevor Cooper --- docs/requirements/vswitchperf_ltd.rst | 63 ++++++++++++++++++----------------- 1 file changed, 32 insertions(+), 31 deletions(-) (limited to 'docs/requirements/vswitchperf_ltd.rst') diff --git a/docs/requirements/vswitchperf_ltd.rst b/docs/requirements/vswitchperf_ltd.rst index 69497c5c..e1372520 100644 --- a/docs/requirements/vswitchperf_ltd.rst +++ b/docs/requirements/vswitchperf_ltd.rst @@ -127,6 +127,8 @@ expected that more will be added. .. 3.2.2.1.1 +.. _PacketLossRatio: + Test ID: LTD.Throughput.RFC2544.PacketLossRatio ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -144,8 +146,8 @@ Test ID: LTD.Throughput.RFC2544.PacketLossRatio Note: Other values can be tested if required by the user. - The selected frame sizes are those previously defined under `Default - Test Parameters `__. + The selected frame sizes are those previously defined under + :ref:`default-test-parameters`. The test can also be used to determine the average latency of the traffic. Under the `RFC2544 `__ @@ -178,6 +180,8 @@ Test ID: LTD.Throughput.RFC2544.PacketLossRatio .. 3.2.2.1.2 +.. _PacketLossRatioFrameModification: + Test ID: LTD.Throughput.RFC2544.PacketLossRatioFrameModification ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -196,8 +200,8 @@ Test ID: LTD.Throughput.RFC2544.PacketLossRatioFrameModification Note: Other values can be tested if required by the user. - The selected frame sizes are those previously defined under `Default - Test Parameters `__. + The selected frame sizes are those previously defined under + :ref:`default-test-parameters`. The test can also be used to determine the average latency of the traffic. Under the `RFC2544 `__ @@ -267,8 +271,8 @@ Test ID: LTD.Throughput.RFC2544.Profile and latency as the offered rate increases is slow and graceful or sudden and severe. - The selected frame sizes are those previously defined under `Default - Test Parameters `__. + The selected frame sizes are those previously defined under + :ref:`default-test-parameters`. The offered traffic rate is described as a percentage delta with respect to the DUT's RFC 2544 Throughput as determined by @@ -319,8 +323,7 @@ Test ID: LTD.Throughput.RFC2544.SystemRecoveryTime The aim of this test is to determine the length of time it takes the DUT to recover from an overload condition for a constant load (fixed length frames at a fixed interval time). The selected frame sizes are those - previously defined under `Default Test Parameters - `__, + previously defined under :ref:`default-test-parameters`, traffic should be sent to the DUT under normal conditions. During the duration of the test and while the traffic flows are passing though the DUT, at least one situation leading to an overload condition for the DUT @@ -359,6 +362,8 @@ Test ID: LTD.Throughput.RFC2544.SystemRecoveryTime .. 3.2.2.1.5 +.. _BackToBackFrames: + Test ID: LTD.Throughput.RFC2544.BackToBackFrames ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -372,9 +377,7 @@ Test ID: LTD.Throughput.RFC2544.BackToBackFrames The aim of this test is to characterize the ability of the DUT to process back-to-back frames. For each frame size previously defined - under `Default Test Parameters - `__, - a burst of traffic + under :ref:`default-test-parameters`, a burst of traffic is sent to the DUT with the minimum inter-frame gap between each frame. If the number of received frames equals the number of frames that were transmitted, the burst size should be increased and traffic is sent to @@ -527,8 +530,7 @@ Test ID: LTD.Throughput.RFC6201.ResetTime Both reset methods SHOULD be exercised. - For each frame size previously defined under `Default Test - Parameters `__, + For each frame size previously defined under :ref:`default-test-parameters`, traffic should be sent to the DUT under normal conditions. During the duration of the test and while the traffic flows are passing through the DUT, the DUT should be reset and the Reset @@ -613,8 +615,7 @@ Test ID: LTD.Throughput.RFC2889.MaxForwardingRate This test measures the DUT's Max Forwarding Rate when the Offered Load is varied between the throughput and the Maximum Offered Load for fixed length frames at a fixed time interval. The selected frame sizes are - those previously defined under `Default Test - Parameters `__. + those previously defined under :ref:`default-test-parameters`. The throughput is the maximum offered load with 0% frame loss (measured by the prerequisite test), and the Maximum Offered Load (as defined by @@ -749,8 +750,7 @@ Test ID: LTD.Throughput.RFC2889.BroadcastFrameForwarding The aim of this test is to determine the maximum forwarding rate of the DUT when forwarding broadcast traffic. For each frame previously defined - under `Default Test Parameters `__, - the traffic should + under :ref:`default-test-parameters`, the traffic should be set up as broadcast traffic. The traffic throughput of the DUT should be measured. @@ -917,8 +917,8 @@ Test ID: LTD.Throughput.Overlay.Network..RFC2544.PacketLossRatio - De-encapsulate the packet, if required - Switch the packet to the correct port - The selected frame sizes are those previously defined under `Default - Test Parameters `__. + The selected frame sizes are those previously defined under + :ref:`default-test-parameters`. Thus, each test comprises an overlay technology, a network function, and a packet size *with* overlay network overhead included @@ -1041,8 +1041,8 @@ Test ID: LTD.Throughput.RFC2544.MatchAction.PacketLossRatio The default loss percentages to be tested are: - X = 0% - X = 10^-7% Other values can be tested if required by the user. The selected - frame sizes are those previously defined under `Default Test Parameters - `__. + frame sizes are those previously defined under + :ref:`default-test-parameters`. The test can also be used to determine the average latency of the traffic when a match action is applied to packets in a flow. Under @@ -1189,6 +1189,8 @@ It is expected that more will be added. .. 3.2.2.3.1 +.. _Scalability0PacketLoss: + Test ID: LTD.Scalability.Flows.RFC2544.0PacketLoss ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -1207,8 +1209,7 @@ Test ID: LTD.Scalability.Flows.RFC2544.0PacketLoss through the fastpath, as such the flows need to be installed on the DUT before passing traffic. - For each frame size previously defined under `Default Test - Parameters `__ + For each frame size previously defined under :ref:`default-test-parameters` and for each of the following number of flows: - 1,000 @@ -1336,8 +1337,8 @@ Test ID: LTD.Scalability.VNF.RFC2544.PacketLossRatio would be to continue to add VNFs without bringing down the DUT. The approach used needs to be documented as part of the test report. - The selected frame sizes are those previously defined under `Default - Test Parameters `__. + The selected frame sizes are those previously defined under + :ref:`default-test-parameters`. The test can also be used to determine the average latency of the traffic. Under the `RFC2544 `__ @@ -1397,8 +1398,8 @@ Test ID: LTD.Scalability.VNF.RFC2544.PacketLossProfile and graceful, or sudden and severe. The minimum number of VNFs to be tested is 3. - The selected frame sizes are those previously defined under `Default - Test Parameters `__. + The selected frame sizes are those previously defined under + :ref:`default-test-parameters`. The offered traffic rate is described as a percentage delta with respect to the DUT's RFC 2544 Throughput as determined by @@ -1479,8 +1480,7 @@ Test ID: LTD.Activation.RFC2889.AddressCachingCapacity MAC learning. The aim of this test is to determine the address caching capacity of the DUT for a constant load (fixed length frames at a fixed interval time). The selected frame sizes are those previously defined - under `Default Test Parameters - `__. + under :ref:`default-test-parameters`. In order to run this test the aging time, that is the maximum time the DUT will keep a learned address in its flow table, and a set of initial @@ -1533,8 +1533,7 @@ Test ID: LTD.Activation.RFC2889.AddressLearningRate MAC learning. The aim of this test is to determine the rate of address learning of the DUT for a constant load (fixed length frames at a fixed interval time). The selected frame sizes are those previously defined - under `Default Test Parameters `__, - traffic should be + under :ref:`default-test-parameters`, traffic should be sent with each IPv4/IPv6 address incremented by one. The rate at which the DUT learns a new address should be measured. The maximum caching capacity from LTD.Memory.RFC2889.AddressCachingCapacity should be taken @@ -1626,6 +1625,8 @@ should be required. It is expected that more will be added. .. 3.2.2.6.1 +.. _CPU0PacketLoss: + Test ID: LTD.Stress.RFC2544.0PacketLoss ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -- cgit 1.2.3-korg