aboutsummaryrefslogtreecommitdiffstats
path: root/docs/testing/user/userguide
diff options
context:
space:
mode:
Diffstat (limited to 'docs/testing/user/userguide')
-rw-r--r--docs/testing/user/userguide/index.rst1
-rw-r--r--docs/testing/user/userguide/trafficcapture.rst297
2 files changed, 298 insertions, 0 deletions
diff --git a/docs/testing/user/userguide/index.rst b/docs/testing/user/userguide/index.rst
index 64d91657..350fbe54 100644
--- a/docs/testing/user/userguide/index.rst
+++ b/docs/testing/user/userguide/index.rst
@@ -16,5 +16,6 @@ VSPERF Test Guide
./testusage.rst
./teststeps.rst
./integration.rst
+ ./trafficcapture.rst
./yardstick.rst
./testlist.rst
diff --git a/docs/testing/user/userguide/trafficcapture.rst b/docs/testing/user/userguide/trafficcapture.rst
new file mode 100644
index 00000000..fa09bfed
--- /dev/null
+++ b/docs/testing/user/userguide/trafficcapture.rst
@@ -0,0 +1,297 @@
+Traffic Capture
+---------------
+
+Tha ability to capture traffic at multiple points of the system is crucial to
+many of the functional tests. It allows the verification of functionality for
+both the vSwitch and the NICs using hardware acceleration for packet
+manipulation and modification.
+
+There are three different methods of traffic capture supported by VSPERF.
+Detailed descriptions of these methods as well as their pros and cons can be
+found in the following chapters.
+
+Traffic Capture inside of a VM
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+This method uses the standard PVP scenario, in which vSwitch first processes
+and modifies the packet before forwarding it to the VM. Inside of the VM we
+capture the traffic using **tcpdump** or a similiar technique. The capture
+information is the used to verify the expected modifications to the packet done
+by vSwitch.
+
+.. code-block:: console
+
+ _
+ +--------------------------------------------------+ |
+ | | |
+ | +------------------------------------------+ | |
+ | | Traffic capture and Packet Forwarding | | |
+ | +------------------------------------------+ | |
+ | ^ : | |
+ | | | | | Guest
+ | : v | |
+ | +---------------+ +---------------+ | |
+ | | logical port 0| | logical port 1| | |
+ +---+---------------+----------+---------------+---+ _|
+ ^ :
+ | |
+ : v _
+ +---+---------------+----------+---------------+---+ |
+ | | logical port 0| | logical port 1| | |
+ | +---------------+ +---------------+ | |
+ | ^ : | |
+ | | | | | Host
+ | : v | |
+ | +--------------+ +--------------+ | |
+ | | phy port | vSwitch | phy port | | |
+ +---+--------------+------------+--------------+---+ _|
+ ^ :
+ | |
+ : v
+ +--------------------------------------------------+
+ | |
+ | traffic generator |
+ | |
+ +--------------------------------------------------+
+
+PROS:
+
+- supports testing with all traffic generators
+- easy to use and implement into test
+- allows testing hardware offloading on the ingress side
+
+CONS:
+
+- does not allow testing hardware offloading on the egress side
+
+An example of Traffic Capture in VM test:
+
+.. code-block:: python
+
+ # Capture Example 1 - Traffic capture inside VM (PVP scenario)
+ # This TestCase will modify VLAN ID set by the traffic generator to the new value.
+ # Correct VLAN ID settings is verified by inspection of captured frames.
+ {
+ Name: capture_pvp_modify_vid,
+ Deployment: pvp,
+ Description: Test and verify VLAN ID modification by Open vSwitch,
+ Parameters : {
+ VSWITCH : OvsDpdkVhost, # works also for Vanilla OVS
+ TRAFFICGEN_DURATION : 5,
+ TRAFFIC : {
+ traffic_type : rfc2544_continuous,
+ frame_rate : 100,
+ 'vlan': {
+ 'enabled': True,
+ 'id': 8,
+ 'priority': 1,
+ 'cfi': 0,
+ },
+ },
+ GUEST_LOOPBACK : ['linux_bridge'],
+ },
+ TestSteps: [
+ # replace original flows with vlan ID modification
+ ['!vswitch', 'add_flow', 'br0', {'in_port': '1', 'actions': ['mod_vlan_vid:4','output:3']}],
+ ['!vswitch', 'add_flow', 'br0', {'in_port': '2', 'actions': ['mod_vlan_vid:4','output:4']}],
+ ['vswitch', 'dump_flows', 'br0'],
+ # verify that received frames have modified vlan ID
+ ['VNF0', 'execute_and_wait', 'tcpdump -i eth0 -c 5 -w dump.pcap vlan 4 &'],
+ ['trafficgen', 'send_traffic',{}],
+ ['!VNF0', 'execute_and_wait', 'tcpdump -qer dump.pcap vlan 4 2>/dev/null | wc -l','|^(\d+)$'],
+ ['tools', 'assert', '#STEP[-1][0] == 5'],
+ ],
+ },
+
+Traffic Capture for testing NICs with HW offloading/acceleration
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The NIC with hardware acceleration/offloading is inserted as an additional card
+into the server. Two ports on this card are then connected together using
+a patch cable as shown in the diagram. Only a single port of the tested NIC is
+setup with DPDK acceleration, while the other is handled by the Linux Ip stack
+allowing for traffic capture. The two NICs are then connected by vSwitch so the
+original card can forward the processed packets to the traffic generator. The
+ports handled by Linux IP stack allow for capturing packets, which are then
+analyzed for changes done by both the vSwitch and the NIC with hardware
+acceleration.
+
+.. code-block:: console
+
+ _
+ +------------------------------------------------+ |
+ | | |
+ | +----------------------------------------+ | |
+ | | vSwitch | | |
+ | | +----------------------------------+ | | |
+ | | | | | | |
+ | | | +------------------+ | | | |
+ | | | | | v | | |
+ | +----------------------------------------+ | | Device under Test
+ | ^ | ^ | | |
+ | | | | | | |
+ | | v | v | |
+ | +--------------+ +--------------+ | |
+ | | | | NIC w HW acc | | |
+ | | phy ports | | phy ports | | |
+ +---+--------------+----------+--------------+---+ _|
+ ^ : ^ :
+ | | | |
+ | | +-------+
+ : v Patch Cable
+ +------------------------------------------------+
+ | |
+ | traffic generator |
+ | |
+ +------------------------------------------------+
+
+PROS:
+
+- allows testing hardware offloading on both the ingress and egress side
+- supports testing with all traffic generators
+- relatively easy to use and implement into tests
+
+CONS:
+
+- a more complex setup with two cards
+- if the tested card only has one port, an additional card is needed
+
+An example of Traffic Capture for testing NICs with HW offloading test:
+
+.. code-block:: python
+
+ # Capture Example 2 - Setup with 2 NICs, where traffic is captured after it is
+ # processed by NIC under the test (2nd NIC). See documentation for further details.
+ # This TestCase will strip VLAN headers from traffic sent by the traffic generator.
+ # The removal of VLAN headers is verified by inspection of captured frames.
+ #
+ # NOTE: This setup expects a DUT with two NICs with two ports each. First NIC is
+ # connected to the traffic generator (standard VSPERF setup). Ports of a second NIC
+ # are interconnected by a patch cable. PCI addresses of all four ports have to be
+ # properly configured in the WHITELIST_NICS parameter.
+ {
+ Name: capture_p2p2p_strip_vlan_ovs,
+ Deployment: clean,
+ Description: P2P Continuous Stream,
+ Parameters : {
+ _CAPTURE_P2P2P_OVS_ACTION : 'strip_vlan',
+ TRAFFIC : {
+ bidir : False,
+ traffic_type : rfc2544_continuous,
+ frame_rate : 100,
+ 'l2': {
+ 'srcmac': ca:fe:00:00:00:00,
+ 'dstmac': 00:00:00:00:00:01
+ },
+ 'vlan': {
+ 'enabled': True,
+ 'id': 8,
+ 'priority': 1,
+ 'cfi': 0,
+ },
+ },
+ # suppress DPDK configuration, so physical interfaces are not bound to DPDK driver
+ 'WHITELIST_NICS' : [],
+ 'NICS' : [],
+ },
+ TestSteps: _CAPTURE_P2P2P_SETUP + [
+ # capture traffic after processing by NIC under the test (after possible egress HW offloading)
+ ['tools', 'exec_shell_background', 'tcpdump -i [2][device] -c 5 -w capture.pcap '
+ 'ether src [l2][srcmac]'],
+ ['trafficgen', 'send_traffic', {}],
+ ['vswitch', 'dump_flows', 'br0'],
+ ['vswitch', 'dump_flows', 'br1'],
+ # there must be 5 captured frames...
+ ['tools', 'exec_shell', 'tcpdump -r capture.pcap | wc -l', '|^(\d+)$'],
+ ['tools', 'assert', '#STEP[-1][0] == 5'],
+ # ...but no vlan headers
+ ['tools', 'exec_shell', 'tcpdump -r capture.pcap vlan | wc -l', '|^(\d+)$'],
+ ['tools', 'assert', '#STEP[-1][0] == 0'],
+ ],
+ },
+
+
+Traffic Capture on the Traffic Generator
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Using the functionality of the Traffic generator makes it possible to configure
+Traffic Capture on both it's ports. With Traffic Capture enabled, VSPERF
+instructs the Traffic Generator to automatically export captured data into
+a pcap file. The captured packets are then sent to VSPERF for analysis and
+verification, monitoring any changes done by both vSwitch and the NICs.
+
+Vsperf currently only supports this functionality with the **T-Rex** generator.
+
+.. code-block:: console
+
+ _
+ +--------------------------------------------------+ |
+ | | |
+ | +--------------------------+ | |
+ | | | | |
+ | | v | | Host
+ | +--------------+ +--------------+ | |
+ | | phy port | vSwitch | phy port | | |
+ +---+--------------+------------+--------------+---+ _|
+ ^ :
+ | |
+ : v
+ +--------------------------------------------------+
+ | |
+ | traffic generator |
+ | |
+ +--------------------------------------------------+
+
+PROS:
+
+- allows testing hardware offloading on both the ingress and egress side
+- does not require an additional NIC
+
+CONS:
+
+- currently only supported by **T-Rex** traffic generator
+
+An example Traffic Capture on the Traffic Generator test:
+
+.. code-block:: python
+
+
+ # Capture Example 3 - Traffic capture by traffic generator.
+ # This TestCase uses OVS flow to add VLAN tag with given ID into every
+ # frame send by traffic generator. Correct frame modificaiton is verified by
+ # inspection of packet capture received by T-Rex.
+ {
+ Name: capture_p2p_add_vlan_ovs_trex,
+ Deployment: clean,
+ Description: OVS: Test VLAN tag modification and verify it by traffic capture,
+ vSwitch : OvsDpdkVhost, # works also for Vanilla OVS
+ Parameters : {
+ TRAFFICGEN : Trex,
+ TRAFFICGEN_DURATION : 5,
+ TRAFFIC : {
+ traffic_type : rfc2544_continuous,
+ frame_rate : 100,
+ # enable capture of five RX frames
+ 'capture': {
+ 'enabled': True,
+ 'tx_ports' : [],
+ 'rx_ports' : [1],
+ 'count' : 5,
+ },
+ },
+ },
+ TestSteps : STEP_VSWITCH_P2P_INIT + [
+ # replace standard L2 flows by flows, which will add VLAN tag with ID 3
+ ['!vswitch', 'add_flow', 'int_br0', {'in_port': '1', 'actions': ['mod_vlan_vid:3','output:2']}],
+ ['!vswitch', 'add_flow', 'int_br0', {'in_port': '2', 'actions': ['mod_vlan_vid:3','output:1']}],
+ ['vswitch', 'dump_flows', 'int_br0'],
+ ['trafficgen', 'send_traffic', {}],
+ ['trafficgen', 'get_results'],
+ # verify that captured frames have vlan tag with ID 3
+ ['tools', 'exec_shell', 'tcpdump -qer /#STEP[-1][0][capture_rx] vlan 3 '
+ '2>/dev/null | wc -l', '|^(\d+)$'],
+ # number of received frames with expected VLAN id must match the number of captured frames
+ ['tools', 'assert', '#STEP[-1][0] == 5'],
+ ] + STEP_VSWITCH_P2P_FINIT,
+ },
+