.. This work is licensed under a Creative Commons Attribution 4.0 International License. .. http://creativecommons.org/licenses/by/4.0 .. (c) OPNFV, Intel Corporation, AT&T and others. .. _integration-tests: Integration tests ================= VSPERF includes a set of integration tests defined in conf/integration. These tests can be run by specifying --integration as a parameter to vsperf. Current tests in conf/integration include switch functionality and Overlay tests. Tests in the conf/integration can be used to test scaling of different switch configurations by adding steps into the test case. For the overlay tests VSPERF supports VXLAN, GRE and GENEVE tunneling protocols. Testing of these protocols is limited to unidirectional traffic and P2P (Physical to Physical scenarios). NOTE: The configuration for overlay tests provided in this guide is for unidirectional traffic only. Executing Integration Tests --------------------------- To execute integration tests VSPERF is run with the integration parameter. To view the current test list simply execute the following command: .. code-block:: console ./vsperf --integration --list The standard tests included are defined inside the ``conf/integration/01_testcases.conf`` file. Executing Tunnel encapsulation tests ------------------------------------ The VXLAN OVS DPDK encapsulation tests requires IPs, MAC addresses, bridge names and WHITELIST_NICS for DPDK. NOTE: Only Ixia traffic generators currently support the execution of the tunnel encapsulation tests. Support for other traffic generators may come in a future release. Default values are already provided. To customize for your environment, override the following variables in you user_settings.py file: .. code-block:: python # Variables defined in conf/integration/02_vswitch.conf # Tunnel endpoint for Overlay P2P deployment scenario # used for br0 VTEP_IP1 = '192.168.0.1/24' # Used as remote_ip in adding OVS tunnel port and # to set ARP entry in OVS (e.g. tnl/arp/set br-ext 192.168.240.10 02:00:00:00:00:02 VTEP_IP2 = '192.168.240.10' # Network to use when adding a route for inner frame data VTEP_IP2_SUBNET = '192.168.240.0/24' # Bridge names TUNNEL_INTEGRATION_BRIDGE = 'br0' TUNNEL_EXTERNAL_BRIDGE = 'br-ext' # IP of br-ext TUNNEL_EXTERNAL_BRIDGE_IP = '192.168.240.1/24' # vxlan|gre|geneve TUNNEL_TYPE = 'vxlan' # Variables defined conf/integration/03_traffic.conf # For OP2P deployment scenario TRAFFICGEN_PORT1_MAC = '02:00:00:00:00:01' TRAFFICGEN_PORT2_MAC = '02:00:00:00:00:02' TRAFFICGEN_PORT1_IP = '1.1.1.1' TRAFFICGEN_PORT2_IP = '192.168.240.10' To run VXLAN encapsulation tests: .. code-block:: console ./vsperf --conf-file user_settings.py --integration \ --test-params 'TUNNEL_TYPE=vxlan' overlay_p2p_tput To run GRE encapsulation tests: .. code-block:: console ./vsperf --conf-file user_settings.py --integration \ --test-params 'TUNNEL_TYPE=gre' overlay_p2p_tput To run GENEVE encapsulation tests: .. code-block:: console ./vsperf --conf-file user_settings.py --integration \ --test-params 'TUNNEL_TYPE=geneve' overlay_p2p_tput To run OVS NATIVE tunnel tests (VXLAN/GRE/GENEVE): 1. Install the OVS kernel modules .. code:: console cd src/ovs/ovs sudo -E make modules_install 2. Set the following variables: .. code-block:: python VSWITCH = 'OvsVanilla' # Specify vport_* kernel module to test. PATHS['vswitch']['OvsVanilla']['src']['modules'] = [ 'vport_vxlan', 'vport_gre', 'vport_geneve', 'datapath/linux/openvswitch.ko', ] **NOTE:** In case, that Vanilla OVS is installed from binary package, then please set ``PATHS['vswitch']['OvsVanilla']['bin']['modules']`` instead. 3. Run tests: .. code-block:: console ./vsperf --conf-file user_settings.py --integration \ --test-params 'TUNNEL_TYPE=vxlan' overlay_p2p_tput Executing VXLAN decapsulation tests ------------------------------------ To run VXLAN decapsulation tests: 1. Set the variables used in "Executing Tunnel encapsulation tests" 2. Run test: .. code-block:: console ./vsperf --conf-file user_settings.py --integration overlay_p2p_decap_cont If you want to use different values for your VXLAN frame, you may set: .. code-block:: python VXLAN_FRAME_L3 = {'proto': 'udp', 'packetsize': 64, 'srcip': TRAFFICGEN_PORT1_IP, 'dstip': '192.168.240.1', } VXLAN_FRAME_L4 = {'srcport': 4789, 'dstport': 4789, 'vni': VXLAN_VNI, 'inner_srcmac': '01:02:03:04:05:06', 'inner_dstmac': '06:05:04:03:02:01', 'inner_srcip': '192.168.0.10', 'inner_dstip': '192.168.240.9', 'inner_proto': 'udp', 'inner_srcport': 3000, 'inner_dstport': 3001, } Executing GRE decapsulation tests --------------------------------- To run GRE decapsulation tests: 1. Set the variables used in "Executing Tunnel encapsulation tests" 2. Run test: .. code-block:: console ./vsperf --conf-file user_settings.py --test-params 'TUNNEL_TYPE=gre' \ --integration overlay_p2p_decap_cont If you want to use different values for your GRE frame, you may set: .. code-block:: python GRE_FRAME_L3 = {'proto': 'gre', 'packetsize': 64, 'srcip': TRAFFICGEN_PORT1_IP, 'dstip': '192.168.240.1', } GRE_FRAME_L4 = {'srcport': 0, 'dstport': 0 'inner_srcmac': '01:02:03:04:05:06', 'inner_dstmac': '06:05:04:03:02:01', 'inner_srcip': '192.168.0.10', 'inner_dstip': '192.168.240.9', 'inner_proto': 'udp', 'inner_srcport': 3000, 'inner_dstport': 3001, } Executing GENEVE decapsulation tests ------------------------------------ IxNet 7.3X does not have native support of GENEVE protocol. The template, GeneveIxNetTemplate.xml_ClearText.xml, should be imported into IxNET for this testcase to work. To import the template do: 1. Run the IxNetwork TCL Server 2. Click on the Traffic menu 3. Click on the Traffic actions and click Edit Packet Templates 4. On the Template editor window, click Import. Select the template located at ``3rd_party/ixia/GeneveIxNetTemplate.xml_ClearText.xml`` and click import. 5. Restart the TCL Server. To run GENEVE decapsulation tests: 1. Set the variables used in "Executing Tunnel encapsulation tests" 2. Run test: .. code-block:: console ./vsperf --conf-file user_settings.py --test-params 'tunnel_type=geneve' \ --integration overlay_p2p_decap_cont If you want to use different values for your GENEVE frame, you may set: .. code-block:: python GENEVE_FRAME_L3 = {'proto': 'udp', 'packetsize': 64, 'srcip': TRAFFICGEN_PORT1_IP, 'dstip': '192.168.240.1', } GENEVE_FRAME_L4 = {'srcport': 6081, 'dstport': 6081, 'geneve_vni': 0, 'inner_srcmac': '01:02:03:04:05:06', 'inner_dstmac': '06:05:04:03:02:01', 'inner_srcip': '192.168.0.10', 'inner_dstip': '192.168.240.9', 'inner_proto': 'udp', 'inner_srcport': 3000, 'inner_dstport': 3001, } Executing Native/Vanilla OVS VXLAN decapsulation tests ------------------------------------------------------ To run VXLAN decapsulation tests: 1. Set the following variables in your user_settings.py file: .. code-block:: python PATHS['vswitch']['OvsVanilla']['src']['modules'] = [ 'vport_vxlan', 'datapath/linux/openvswitch.ko', ] TRAFFICGEN_PORT1_IP = '172.16.1.2' TRAFFICGEN_PORT2_IP = '192.168.1.11' VTEP_IP1 = '172.16.1.2/24' VTEP_IP2 = '192.168.1.1' VTEP_IP2_SUBNET = '192.168.1.0/24' TUNNEL_EXTERNAL_BRIDGE_IP = '172.16.1.1/24' TUNNEL_INT_BRIDGE_IP = '192.168.1.1' VXLAN_FRAME_L2 = {'srcmac': '01:02:03:04:05:06', 'dstmac': '06:05:04:03:02:01', } VXLAN_FRAME_L3 = {'proto': 'udp', 'packetsize': 64, 'srcip': TRAFFICGEN_PORT1_IP, 'dstip': '172.16.1.1', } VXLAN_FRAME_L4 = { 'srcport': 4789, 'dstport': 4789, 'protocolpad': 'true', 'vni': 99, 'inner_srcmac': '01:02:03:04:05:06', 'inner_dstmac': '06:05:04:03:02:01', 'inner_srcip': '192.168.1.2', 'inner_dstip': TRAFFICGEN_PORT2_IP, 'inner_proto': 'udp', 'inner_srcport': 3000, 'inner_dstport': 3001, } **NOTE:** In case, that Vanilla OVS is installed from binary package, then please set ``PATHS['vswitch']['OvsVanilla']['bin']['modules']`` instead. 2. Run test: .. code-block:: console ./vsperf --conf-file user_settings.py --integration \ --test-params 'tunnel_type=vxlan' overlay_p2p_decap_cont Executing Native/Vanilla OVS GRE decapsulation tests ---------------------------------------------------- To run GRE decapsulation tests: 1. Set the following variables in your user_settings.py file: .. code-block:: python PATHS['vswitch']['OvsVanilla']['src']['modules'] = [ 'vport_gre', 'datapath/linux/openvswitch.ko', ] TRAFFICGEN_PORT1_IP = '172.16.1.2' TRAFFICGEN_PORT2_IP = '192.168.1.11' VTEP_IP1 = '172.16.1.2/24' VTEP_IP2 = '192.168.1.1' VTEP_IP2_SUBNET = '192.168.1.0/24' TUNNEL_EXTERNAL_BRIDGE_IP = '172.16.1.1/24' TUNNEL_INT_BRIDGE_IP = '192.168.1.1' GRE_FRAME_L2 = {'srcmac': '01:02:03:04:05:06', 'dstmac': '06:05:04:03:02:01', } GRE_FRAME_L3 = {'proto': 'udp', 'packetsize': 64, 'srcip': TRAFFICGEN_PORT1_IP, 'dstip': '172.16.1.1', } GRE_FRAME_L4 = { 'srcport': 4789, 'dstport': 4789, 'protocolpad': 'true', 'inner_srcmac': '01:02:03:04:05:06', 'inner_dstmac': '06:05:04:03:02:01', 'inner_srcip': '192.168.1.2', 'inner_dstip': TRAFFICGEN_PORT2_IP, 'inner_proto': 'udp', 'inner_srcport': 3000, 'inner_dstport': 3001, } **NOTE:** In case, that Vanilla OVS is installed from binary package, then please set ``PATHS['vswitch']['OvsVanilla']['bin']['modules']`` instead. 2. Run test: .. code-block:: console ./vsperf --conf-file user_settings.py --integration \ --test-params 'tunnel_type=gre' overlay_p2p_decap_cont Executing Native/Vanilla OVS GENEVE decapsulation tests ------------------------------------------------------- To run GENEVE decapsulation tests: 1. Set the following variables in your user_settings.py file: .. code-block:: python PATHS['vswitch']['OvsVanilla']['src']['modules'] = [ 'vport_geneve', 'datapath/linux/openvswitch.ko', ] TRAFFICGEN_PORT1_IP = '172.16.1.2' TRAFFICGEN_PORT2_IP = '192.168.1.11' VTEP_IP1 = '172.16.1.2/24' VTEP_IP2 = '192.168.1.1' VTEP_IP2_SUBNET = '192.168.1.0/24' TUNNEL_EXTERNAL_BRIDGE_IP = '172.16.1.1/24' TUNNEL_INT_BRIDGE_IP = '192.168.1.1' GENEVE_FRAME_L2 = {'srcmac': '01:02:03:04:05:06', 'dstmac': '06:05:04:03:02:01', } GENEVE_FRAME_L3 = {'proto': 'udp', 'packetsize': 64, 'srcip': TRAFFICGEN_PORT1_IP, 'dstip': '172.16.1.1', } GENEVE_FRAME_L4 = {'srcport': 6081, 'dstport': 6081, 'protocolpad': 'true', 'geneve_vni': 0, 'inner_srcmac': '01:02:03:04:05:06', 'inner_dstmac': '06:05:04:03:02:01', 'inner_srcip': '192.168.1.2', 'inner_dstip': TRAFFICGEN_PORT2_IP, 'inner_proto': 'udp', 'inner_srcport': 3000, 'inner_dstport': 3001, } **NOTE:** In case, that Vanilla OVS is installed from binary package, then please set ``PATHS['vswitch']['OvsVanilla']['bin']['modules']`` instead. 2. Run test: .. code-block:: console ./vsperf --conf-file user_settings.py --integration \ --test-params 'tunnel_type=geneve' overlay_p2p_decap_cont Executing Tunnel encapsulation+decapsulation tests -------------------------------------------------- The OVS DPDK encapsulation/decapsulation tests requires IPs, MAC addresses, bridge names and WHITELIST_NICS for DPDK. The test cases can test the tunneling encap and decap without using any ingress overlay traffic as compared to above test cases. To achieve this the OVS is configured to perform encap and decap in a series on the same traffic stream as given below. TRAFFIC-IN --> [ENCAP] --> [MOD-PKT] --> [DECAP] --> TRAFFIC-OUT Default values are already provided. To customize for your environment, override the following variables in you user_settings.py file: .. code-block:: python # Variables defined in conf/integration/02_vswitch.conf # Bridge names TUNNEL_EXTERNAL_BRIDGE1 = 'br-phy1' TUNNEL_EXTERNAL_BRIDGE2 = 'br-phy2' TUNNEL_MODIFY_BRIDGE1 = 'br-mod1' TUNNEL_MODIFY_BRIDGE2 = 'br-mod2' # IP of br-mod1 TUNNEL_MODIFY_BRIDGE_IP1 = '10.0.0.1/24' # Mac of br-mod1 TUNNEL_MODIFY_BRIDGE_MAC1 = '00:00:10:00:00:01' # IP of br-mod2 TUNNEL_MODIFY_BRIDGE_IP2 = '20.0.0.1/24' #Mac of br-mod2 TUNNEL_MODIFY_BRIDGE_MAC2 = '00:00:20:00:00:01' # vxlan|gre|geneve, Only VXLAN is supported for now. TUNNEL_TYPE = 'vxlan' To run VXLAN encapsulation+decapsulation tests: .. code-block:: console ./vsperf --conf-file user_settings.py --integration \ overlay_p2p_mod_tput