# Copyright 2015-2016 Intel Corporation.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# The 1st value of SUPPORTED_TUNNELING_PROTO is used as the default
# tunneling protocol for OP2P tests.
SUPPORTED_TUNNELING_PROTO = ['vxlan', 'gre', 'geneve']
#
# Generic test configuration options are described at conf/01_testcases.conf
#
#
# Options specific to integration testcases are described below:
#
# Required for OP2P tests
# "Tunnel Type": ["vxlan"|"gre"|"geneve"] # Tunnel Type defines tunneling protocol to use.
# # It can be overridden by cli option tunnel_type.
# # Values:
# # "vxlan" - iteration of destination MAC address
# # "gre" - iteration of destination IP address
# # "geneve" - iteration of destination UDP port
# # Default value is "vxlan".
#
# biDirectional testing for OP2P is not yet supported.
# biDirectional must be set to False.
#
# "TestSteps": [] # Definition of integration test steps.
# # In case that this list is defined, then
# # vsperf will execute defined test steps
# # one by one. It can be used to configure
# # vswitch, insert flows and transmit traffic.
# # It is possible to refer to result of any
# # previous step through #STEP[i][j] macro.
# # Where i is a number of step (starts from 0)
# # and j is index of result returned by step i.
#
# Common TestSteps parts ("macros")
#
# P2P macros
STEP_VSWITCH_P2P_FLOWS_INIT = [
['vswitch', 'add_switch', 'int_br0'], # STEP 0
['vswitch', 'add_phy_port', 'int_br0'], # STEP 1
['vswitch', 'add_phy_port', 'int_br0'], # STEP 2
['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[2][1]', 'actions': ['output:#STEP[1][1]'], 'idle_timeout': '0'}],
]
STEP_VSWITCH_P2P_FLOWS_FINIT = [
['vswitch', 'dump_flows', 'int_br0'],
['vswitch', 'del_flow', 'int_br0', {'in_port': '#STEP[1][1]'}],
['vswitch', 'del_flow', 'int_br0', {'in_port': '#STEP[2][1]'}],
['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'],
['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'],
['vswitch', 'del_switch', 'int_br0'],
]
# PVP and PVVP macros
STEP_VSWITCH_PVP_INIT = [
['vswitch', 'add_switch', 'int_br0'], # STEP 0
['vswitch', 'add_phy_port', 'int_br0'], # STEP 1
['vswitch', 'add_phy_port', 'int_br0'], # STEP 2
['vswitch', 'add_vport', 'int_br0'], # STEP 3
['vswitch', 'add_vport', 'int_br0'], # STEP 4
]
STEP_VSWITCH_PVP_FINIT = [
['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'],
['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'],
['vswitch', 'del_port', 'int_br0', '#STEP[3][0]'],
['vswitch', 'del_port', 'int_br0', '#STEP[4][0]'],
['vswitch', 'del_switch', 'int_br0'],
]
STEP_VSWITCH_PVP_FLOWS_INIT = STEP_VSWITCH_PVP_INIT + [
['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', 'actions': ['output:#STEP[3][1]'], 'idle_timeout': '0'}],
['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[4][1]', 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[2][1]', 'actions': ['output:#STEP[4][1]'], 'idle_timeout': '0'}],
['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[3][1]', 'actions': ['output:#STEP[1][1]'], 'idle_timeout': '0'}],
]
STEP_VSWITCH_PVP_FLOWS_FINIT = [
['vswitch', 'dump_flows', 'int_br0'],
['vswitch', 'del_flow', 'int_br0', {'in_port': '#STEP[1][1]'}],
['vswitch', 'del_flow', 'int_br0', {'in_port': '#STEP[4][1]'}],
['vswitch', 'del_flow', 'int_br0', {'in_port': '#STEP[2][1]'}],
['vswitch', 'del_flow', 'int_br0', {'in_port': '#STEP[3][1]'}],
] + STEP_VSWITCH_PVP_FINIT
STEP_VSWITCH_PVVP_INIT = STEP_VSWITCH_PVP_INIT + [
['vswitch', 'add_vport', 'int_br0'], # STEP 5
['vswitch', 'add_vport', 'int_br0'], # STEP 6
]
STEP_VSWITCH_PVVP_FINIT = [
['vswitch', 'del_port', 'int_br0', '#STEP[5][0]'],
['vswitch', 'del_port', 'int_br0', '#STEP[6][0]'],
] + STEP_VSWITCH_PVP_FINIT
STEP_VSWITCH_PVVP_FLOWS_INIT = STEP_VSWITCH_PVVP_INIT + [
['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', 'actions': ['output:#STEP[3][1]'], 'idle_timeout': '0'}],
['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[4][1]', 'actions': ['output:#STEP[5][1]'], 'idle_timeout': '0'}],
['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[6][1]', 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[2][1]', 'actions': ['output:#STEP[6][1]'], 'idle_timeout': '0'}],
['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[5][1]', 'actions': ['output:#STEP[4][1]'], 'idle_timeout': '0'}],
['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[3][1]', 'actions': ['output:#STEP[1][1]'], 'idle_timeout': '0'}],
]
STEP_VSWITCH_PVVP_FLOWS_FINIT = [
['vswitch', 'dump_flows', 'int_br0'],
['vswitch', 'del_flow', 'int_br0', {'in_port': '#STEP[1][1]'}],
['vswitch', 'del_flow', 'int_br0', {'in_port': '#STEP[4][1]'}],
['vswitch', 'del_flow', 'int_br0', {'in_port': '#STEP[6][1]'}],
['vswitch', 'del_flow', 'int_br0', {'in_port': '#STEP[2][1]'}],
['vswitch', 'del_flow', 'int_br0', {'in_port': '#STEP[5][1]'}],
['vswitch', 'del_flow', 'int_br0', {'in_port': '#STEP[3][1]'}],
] + STEP_VSWITCH_PVVP_FINIT
#
# Definition of integration tests
#
INTEGRATION_TESTS = [
{
"Name": "overlay_p2p_tput",
"Traffic Type": "rfc2544",
"Deployment": "op2p",
"biDirectional": 'False',
"Tunnel Type": SUPPORTED_TUNNELING_PROTO[0],
"Tunnel Operation": "encapsulation",
"Description": "Overlay Encapsulation Throughput RFC2544 Test",
},
{
"Name": "overlay_p2p_cont",
"Traffic Type": "continuous",
"Deployment": "op2p",
"biDirectional": 'False',
"Tunnel Type": SUPPORTED_TUNNELING_PROTO[0],
"Tunnel Operation": "encapsulation",
"Description": "Overlay Encapsulation Continuous Stream",
},
{
"Name": "overlay_p2p_decap_tput",
"Traffic Type": "rfc2544",
"Deployment": "op2p",
"biDirectional": 'False',
"Tunnel Type": SUPPORTED_TUNNELING_PROTO[0],
"Tunnel Operation": "decapsulation",
"Description": "Overlay Decapsulation Throughput RFC2544 Test",
},
{
"Name": "overlay_p2p_decap_cont",
"Traffic Type": "continuous",
"Deployment": "op2p",
"biDirectional": 'False',
"Tunnel Type": SUPPORTED_TUNNELING_PROTO[0],
"Tunnel Operation": "decapsulation",
"Description": "Overlay Decapsulation Continuous Stream",
},
{
"Name": "vswitch_add_del_bridge",
"Deployment": "clean",
"Description": "vSwitch - add and delete bridge",
"TestSteps": [
['vswitch', 'add_switch', 'int_br0'],
['vswitch', 'del_switch', 'int_br0'],
]
},
{
"Name": "vswitch_add_del_bridges",
"Deployment": "clean",
"Description": "vSwitch - add and delete bridges",
"TestSteps": [
['vswitch', 'add_switch', 'int_br0'],
['vswitch', 'add_switch', 'int_br1'],
['vswitch', 'del_switch', 'int_br0'],
['vswitch', 'del_switch', 'int_br1'],
]
},
{
"Name": "vswitch_add_del_phy_port",
"Deployment": "clean",
"Description": "vSwitch - add and delete physical port",
"TestSteps": [
['vswitch', 'add_switch', 'int_br0'],
['vswitch', 'add_phy_port', 'int_br0'],
['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'],
['vswitch', 'del_switch', 'int_br0'],
]
},
{
"Name": "vswitch_add_del_phy_ports",
"Deployment": "clean",
"Description": "vSwitch - add and delete physical ports",
"TestSteps": [
['vswitch', 'add_switch', 'int_br0'],
['vswitch', 'add_phy_port', 'int_br0'],
['vswitch', 'add_phy_port', 'int_br0'],
['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'],
['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'],
['vswitch', 'del_switch', 'int_br0'],
]
},
{
"Name": "vswitch_add_del_vport",
"Deployment": "clean",
"Description": "vSwitch - add and delete virtual port",
"TestSteps": [
['vswitch', 'add_switch', 'int_br0'],
['vswitch', 'add_vport', 'int_br0'],
['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'],
['vswitch', 'del_switch', 'int_br0'],
]
},
{
"Name": "vswitch_add_del_vports",
"Deployment": "clean",
"Description": "vSwitch - add and delete virtual ports",
"TestSteps": [
['vswitch', 'add_switch', 'int_br0'],
['vswitch', 'add_vport', 'int_br0'],
['vswitch', 'add_vport', 'int_br0'],
['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'],
['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'],
['vswitch', 'del_switch', 'int_br0'],
]
},
{
"Name": "vswitch_add_del_flow",
"Deployment": "clean",
"Description": "vSwitch - add and delete flow",
"TestSteps": [
['vswitch', 'add_switch', 'int_br0'],
['vswitch', 'add_phy_port', 'int_br0'],
['vswitch', 'add_phy_port', 'int_br0'],
['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
['vswitch', 'del_flow', 'int_br0', {'in_port': '#STEP[1][1]'}],
['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'],
['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'],
['vswitch', 'del_switch', 'int_br0'],
]
},
{
"Name": "vswitch_add_del_flows",
"Deployment": "clean",
"Description": "vSwitch - add and delete flows",
"TestSteps": STEP_VSWITCH_P2P_FLOWS_INIT +
STEP_VSWITCH_P2P_FLOWS_FINIT
},
{
"Name": "vswitch_p2p_tput",
"Deployment": "clean",
"Description": "vSwitch - configure switch and execute RFC2544 throughput test",
"TestSteps": STEP_VSWITCH_P2P_FLOWS_INIT +
[
['trafficgen', 'send_traffic', {'traffic_type' : 'throughput', 'bidir' : 'True'}],
] +
STEP_VSWITCH_P2P_FLOWS_FINIT
},
{
"Name": "vswitch_p2p_back2back",
"Deployment": "clean",
"Description": "vSwitch - configure switch and execute RFC2544 back2back test",
"TestSteps": STEP_VSWITCH_P2P_FLOWS_INIT +
[
['trafficgen', 'send_traffic', {'traffic_type' : 'back2back', 'bidir' : 'True'}],
] +
STEP_VSWITCH_P2P_FLOWS_FINIT
},
{
"Name": "vswitch_p2p_cont",
"Deployment": "clean",
"Description": "vSwitch - configure switch and execute continuous stream test",
"TestSteps": STEP_VSWITCH_P2P_FLOWS_INIT +
[
['trafficgen', 'send_traffic', {'traffic_type' : 'continuous', 'bidir' : 'True'}],
] +
STEP_VSWITCH_P2P_FLOWS_FINIT
},
{
"Name": "vswitch_pvp",
"Deployment": "clean",
"Description": "vSwitch - configure switch and one vnf",
"TestSteps": STEP_VSWITCH_PVP_INIT +
[
['vnf', 'start'],
['vnf', 'stop'],
] +
STEP_VSWITCH_PVP_FINIT
},
{
"Name": "vswitch_pvp_tput",
"Deployment": "clean",
"Description": "vSwitch - configure switch, vnf and execute RFC2544 throughput test",
"TestSteps": STEP_VSWITCH_PVP_FLOWS_INIT +
[
['vnf', 'start'],
['trafficgen', 'send_traffic', {'traffic_type' : 'throughput', 'bidir' : 'True'}],
['vnf', 'stop'],
] +
STEP_VSWITCH_PVP_FLOWS_FINIT
},
{
"Name": "vswitch_pvp_back2back",
"Deployment": "clean",
"Description": "vSwitch - configure switch, vnf and execute RFC2544 back2back test",
"TestSteps": STEP_VSWITCH_PVP_FLOWS_INIT +
[
['vnf', 'start'],
['trafficgen', 'send_traffic', {'traffic_type' : 'back2back', 'bidir' : 'True'}],
['vnf', 'stop'],
] +
STEP_VSWITCH_PVP_FLOWS_FINIT
},
{
"Name": "vswitch_pvp_cont",
"Deployment": "clean",
"Description": "vSwitch - configure switch, vnf and execute continuous stream test",
"TestSteps": STEP_VSWITCH_PVP_FLOWS_INIT +
[
['vnf', 'start'],
['trafficgen', 'send_traffic', {'traffic_type' : 'continuous', 'bidir' : 'True'}],
['vnf', 'stop'],
] +
STEP_VSWITCH_PVP_FLOWS_FINIT
},
{
"Name": "vswitch_pvp_all",
"Deployment": "clean",
"Description": "vSwitch - configure switch, vnf and execute all test types",
"TestSteps": STEP_VSWITCH_PVP_FLOWS_INIT +
[
['vnf', 'start'],
['trafficgen', 'send_traffic', {'traffic_type' : 'throughput', 'bidir' : 'True'}],
['trafficgen', 'send_traffic', {'traffic_type' : 'back2back', 'bidir' : 'True'}],
['trafficgen', 'send_traffic', {'traffic_type' : 'continuous', 'bidir' : 'True'}],
['vnf', 'stop'],
] +
STEP_VSWITCH_PVP_FLOWS_FINIT
},
{
"Name": "vswitch_pvvp",
"Deployment": "clean",
"Description": "vSwitch - configure switch and two vnfs",
"TestSteps": STEP_VSWITCH_PVVP_INIT +
[
['vnf1', 'start'],
['vnf2', 'start'],
['vnf1', 'stop'],
['vnf2', 'stop'],
] +
STEP_VSWITCH_PVVP_FINIT
},
{
"Name": "vswitch_pvvp_tput",
"Deployment": "clean",
"Description": "vSwitch - configure switch, two chained vnfs and execute RFC2544 throughput test",
"TestSteps": STEP_VSWITCH_PVVP_FLOWS_INIT +
[
['vnf1', 'start'],
['vnf2', 'start'],
['trafficgen', 'send_traffic', {'traffic_type' : 'throughput', 'bidir' : 'True'}],
['vnf1', 'stop'],
['vnf2', 'stop'],
] +
STEP_VSWITCH_PVVP_FLOWS_FINIT
},
{
"Name": "vswitch_pvvp_back2back",
"Deployment": "clean",
"Description": "vSwitch - configure switch, two chained vnfs and execute RFC2544 back2back test",
"TestSteps": STEP_VSWITCH_PVVP_FLOWS_INIT +
[
['vnf1', 'start'],
['vnf2', 'start'],
['trafficgen', 'send_traffic', {'traffic_type' : 'back2back', 'bidir' : 'True'}],
['vnf1', 'stop'],
['vnf2', 'stop'],
] +
STEP_VSWITCH_PVVP_FLOWS_FINIT
},
{
"Name": "vswitch_pvvp_cont",
"Deployment": "clean",
"Description": "vSwitch - configure switch, two chained vnfs and execute continuous stream test",
"TestSteps": STEP_VSWITCH_PVVP_FLOWS_INIT +
[
['vnf1', 'start'],
['vnf2', 'start'],
['trafficgen', 'send_traffic', {'traffic_type' : 'continuous', 'bidir' : 'True'}],
['vnf1', 'stop'],
['vnf2', 'stop'],
] +
STEP_VSWITCH_PVVP_FLOWS_FINIT
},
{
"Name": "vswitch_pvvp_all",
"Deployment": "clean",
"Description": "vSwitch - configure switch, two chained vnfs and execute all test types",
"TestSteps": STEP_VSWITCH_PVVP_FLOWS_INIT +
[
['vnf1', 'start'],
['vnf2', 'start'],
['trafficgen', 'send_traffic', {'traffic_type' : 'throughput', 'bidir' : 'True'}],
['trafficgen', 'send_traffic', {'traffic_type' : 'back2back', 'bidir' : 'True'}],
['trafficgen', 'send_traffic', {'traffic_type' : 'continuous', 'bidir' : 'True'}],
['vnf1', 'stop'],
['vnf2', 'stop'],
] +
STEP_VSWITCH_PVVP_FLOWS_FINIT
},
]
# Example of TC definition with exact vSwitch, VNF and TRAFFICGEN values.
# {
# "Name": "ovs_vanilla_linux_bridge_pvp_cont",
# "Deployment": "clean",
# "Description": "vSwitch - configure OVS Vanilla, QemuVirtioNet with linux bridge and execute continuous stream test",
# "vSwitch" : "OvsVanilla",
# "VNF" : "QemuVirtioNet",
# "Trafficgen": "IxNet",
# "Parameters": {"guest_loopback" : "linux_bridge"},
# "TestSteps": STEP_VSWITCH_PVP_FLOWS_INIT +
# [
# ['vnf', 'start'],
# ['trafficgen', 'send_traffic', {'traffic_type' : 'continuous', 'bidir' : 'True'}],
# ['vnf', 'stop'],
# ] +
# STEP_VSWITCH_PVP_FLOWS_FINIT
# },