From 4fa105c5b4113a9ff4311569709ca99a8fbf5028 Mon Sep 17 00:00:00 2001 From: "Sridhar K. N. Rao" Date: Wed, 10 Nov 2021 21:26:14 +0530 Subject: Minor Fixes. This patch add multiple minor changes. Signed-off-by: Sridhar K. N. Rao Change-Id: Ieda8af0b8145c1ffde6bfdb7a7394776b42df988 --- .../dpdk-forwarding-pods/Dockerfile | 110 -------- .../trafficgen-pods/pktgen/Dockerfile | 48 ---- .../trafficgen-pods/prox/Dockerfile | 75 ------ .../trafficgen-pods/prox/deploycentostools.sh | 298 --------------------- .../trafficgen-pods/prox/port_info/Makefile | 42 --- .../trafficgen-pods/prox/port_info/port_info.c | 66 ----- .../trafficgen-pods/prox/rapid_rsa_key | 49 ---- .../trafficgen-pods/prox/rapid_rsa_key.pub | 1 - .../test-containers/trafficgen-pods/prox/start.sh | 39 --- .../trafficgen-pods/prox/vhost_substitute.sh | 19 -- .../trafficgen-pods/trex/Dockerfile | 46 ---- .../trafficgen-pods/trex/deploycentostools.sh | 126 --------- .../trafficgen-pods/trex/rapid_rsa_key | 49 ---- .../trafficgen-pods/trex/rapid_rsa_key.pub | 1 - .../trafficgen-pods/trex/trex_cfg.yaml | 10 - .../trafficgen-pods/trex/trex_cfg.yaml.j2 | 8 - .../trafficgen-pods/trex/vppconf.py | 70 ----- 17 files changed, 1057 deletions(-) delete mode 100644 tools/k8s/test-containers/dpdk-forwarding-pods/Dockerfile delete mode 100644 tools/k8s/test-containers/trafficgen-pods/pktgen/Dockerfile delete mode 100644 tools/k8s/test-containers/trafficgen-pods/prox/Dockerfile delete mode 100644 tools/k8s/test-containers/trafficgen-pods/prox/deploycentostools.sh delete mode 100644 tools/k8s/test-containers/trafficgen-pods/prox/port_info/Makefile delete mode 100644 tools/k8s/test-containers/trafficgen-pods/prox/port_info/port_info.c delete mode 100644 tools/k8s/test-containers/trafficgen-pods/prox/rapid_rsa_key delete mode 100644 tools/k8s/test-containers/trafficgen-pods/prox/rapid_rsa_key.pub delete mode 100755 tools/k8s/test-containers/trafficgen-pods/prox/start.sh delete mode 100755 tools/k8s/test-containers/trafficgen-pods/prox/vhost_substitute.sh delete mode 100644 tools/k8s/test-containers/trafficgen-pods/trex/Dockerfile delete mode 100644 tools/k8s/test-containers/trafficgen-pods/trex/deploycentostools.sh delete mode 100644 tools/k8s/test-containers/trafficgen-pods/trex/rapid_rsa_key delete mode 100644 tools/k8s/test-containers/trafficgen-pods/trex/rapid_rsa_key.pub delete mode 100644 tools/k8s/test-containers/trafficgen-pods/trex/trex_cfg.yaml delete mode 100644 tools/k8s/test-containers/trafficgen-pods/trex/trex_cfg.yaml.j2 delete mode 100644 tools/k8s/test-containers/trafficgen-pods/trex/vppconf.py (limited to 'tools/k8s') diff --git a/tools/k8s/test-containers/dpdk-forwarding-pods/Dockerfile b/tools/k8s/test-containers/dpdk-forwarding-pods/Dockerfile deleted file mode 100644 index 58f558fb..00000000 --- a/tools/k8s/test-containers/dpdk-forwarding-pods/Dockerfile +++ /dev/null @@ -1,110 +0,0 @@ -FROM centos:7 - -# -# Install required packages -# -RUN rpm --import https://mirror.go-repo.io/centos/RPM-GPG-KEY-GO-REPO && curl -s https://mirror.go-repo.io/centos/go-repo.repo | tee /etc/yum.repos.d/go-repo.repo -RUN yum groupinstall -y "Development Tools" -RUN yum install -y wget numactl-devel git golang make; yum clean all -# Debug Tools (if needed): -#RUN yum install -y pciutils iproute; yum clean all - -# -# Download and Build APP-NetUtil -# -WORKDIR /root/go/src/ -RUN go get github.com/openshift/app-netutil 2>&1 > /tmp/UserspaceDockerBuild.log || echo "Can ignore no GO files." -WORKDIR /root/go/src/github.com/openshift/app-netutil -RUN make c_sample -RUN cp bin/libnetutil_api.so /lib64/libnetutil_api.so; cp bin/libnetutil_api.h /usr/include/libnetutil_api.h - -# -# Download and Build DPDK -# -ENV DPDK_VER 20.05 -ENV DPDK_DIR /usr/src/dpdk-${DPDK_VER} -WORKDIR /usr/src/ -RUN wget http://fast.dpdk.org/rel/dpdk-${DPDK_VER}.tar.xz -RUN tar -xpvf dpdk-${DPDK_VER}.tar.xz - -ENV RTE_TARGET=x86_64-native-linuxapp-gcc -ENV RTE_SDK=${DPDK_DIR} -WORKDIR ${DPDK_DIR} -# DPDK_VER 19.08 -RUN sed -i -e 's/EAL_IGB_UIO=y/EAL_IGB_UIO=n/' config/common_linux -RUN sed -i -e 's/KNI_KMOD=y/KNI_KMOD=n/' config/common_linux -RUN sed -i -e 's/LIBRTE_KNI=y/LIBRTE_KNI=n/' config/common_linux -RUN sed -i -e 's/LIBRTE_PMD_KNI=y/LIBRTE_PMD_KNI=n/' config/common_linux -# Additional Debug if Needed -#RUN sed -i -e 's/CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n/CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=y/' config/common_base - -# DPDK_VER 19.02 -#RUN sed -i -e 's/EAL_IGB_UIO=y/EAL_IGB_UIO=n/' config/common_linuxapp -#RUN sed -i -e 's/KNI_KMOD=y/KNI_KMOD=n/' config/common_linuxapp -#RUN sed -i -e 's/LIBRTE_KNI=y/LIBRTE_KNI=n/' config/common_linuxapp -#RUN sed -i -e 's/LIBRTE_PMD_KNI=y/LIBRTE_PMD_KNI=n/' config/common_linuxapp - -# Add vhost patch -COPY ./vhost_substitute.sh ./vhost_substitute.sh -RUN ./vhost_substitute.sh - -RUN make install T=${RTE_TARGET} DESTDIR=${RTE_SDK} - -# -# Build TestPmd -# -WORKDIR ${DPDK_DIR}/app/test-pmd -COPY ./dpdk-args.c ./dpdk-args.c -COPY ./dpdk-args.h ./dpdk-args.h -COPY ./testpmd_eal_init.txt ./testpmd_eal_init.txt -COPY ./testpmd_launch_args_parse.txt ./testpmd_launch_args_parse.txt -COPY ./testpmd_substitute.sh ./testpmd_substitute.sh -RUN ./testpmd_substitute.sh -RUN make -RUN cp testpmd /usr/bin/testpmd - -# -# Build l2fwd -# -WORKDIR ${DPDK_DIR}/examples/l2fwd -COPY ./dpdk-args.c ./dpdk-args.c -COPY ./dpdk-args.h ./dpdk-args.h -COPY ./l2fwd_eal_init.txt ./l2fwd_eal_init.txt -COPY ./l2fwd_parse_args.txt ./l2fwd_parse_args.txt -COPY ./l2fwd_substitute.sh ./l2fwd_substitute.sh -RUN ./l2fwd_substitute.sh -RUN make -RUN cp build/l2fwd /usr/bin/l2fwd - -# -# Build l3fwd -# -#WORKDIR ${DPDK_DIR}/examples/l3fwd -#COPY ./dpdk-args.c ./dpdk-args.c -#COPY ./dpdk-args.h ./dpdk-args.h -#COPY ./l3fwd_eal_init.txt ./l3fwd_eal_init.txt -#COPY ./l3fwd_parse_args.txt ./l3fwd_parse_args.txt -#COPY ./l3fwd_substitute.sh ./l3fwd_substitute.sh -#RUN ./l3fwd_substitute.sh -#RUN make -#RUN cp build/l3fwd /usr/bin/l3fwd - -# Copy default APP -RUN cp /usr/bin/l2fwd /usr/bin/dpdk-app - -# -------- Import stage. -# Docker 17.05 or higher -# BEGIN -FROM centos -COPY --from=0 /usr/bin/dpdk-app /usr/bin/dpdk-app -COPY --from=0 /usr/bin/l2fwd /usr/bin/l2fwd -#COPY --from=0 /usr/bin/l3fwd /usr/bin/l3fwd -COPY --from=0 /usr/bin/testpmd /usr/bin/testpmd -COPY --from=0 /lib64/libnetutil_api.so /lib64/libnetutil_api.so -COPY --from=0 /usr/lib64/libnuma.so.1 /usr/lib64/libnuma.so.1 -# END - -# COPY ./docker-entrypoint.sh / -# RUN chmod +x /docker-entrypoint.sh -# ENTRYPOINT ["sleep", "5s"] -#CMD ["l2fwd"] diff --git a/tools/k8s/test-containers/trafficgen-pods/pktgen/Dockerfile b/tools/k8s/test-containers/trafficgen-pods/pktgen/Dockerfile deleted file mode 100644 index 8288cf63..00000000 --- a/tools/k8s/test-containers/trafficgen-pods/pktgen/Dockerfile +++ /dev/null @@ -1,48 +0,0 @@ -FROM centos:7 as builder - -# -## Install required packages -## -RUN rpm --import https://mirror.go-repo.io/centos/RPM-GPG-KEY-GO-REPO && curl -s https://mirror.go-repo.io/centos/go-repo.repo | tee /etc/yum.repos.d/go-repo.repo -RUN yum groupinstall -y "Development Tools" -RUN yum install -y wget numactl-devel git golang make; yum clean all -## Debug Tools (if needed): -RUN yum install -y pciutils iproute; yum clean all - -## -## Download and Build APP-NetUtil -## -WORKDIR /root/go/src/ -RUN go get github.com/openshift/app-netutil 2>&1 > /tmp/UserspaceDockerBuild.log || echo "Can ignore no GO files." -WORKDIR /root/go/src/github.com/openshift/app-netutil -RUN make c_sample -RUN cp bin/libnetutil_api.so /lib64/libnetutil_api.so; cp bin/libnetutil_api.h /usr/include/libnetutil_api.h - -## Download and Build DPDK -## -ENV DPDK_VER 21.02 -ENV DPDK_DIR /usr/src/dpdk-${DPDK_VER} -WORKDIR /usr/src/ -RUN wget http://fast.dpdk.org/rel/dpdk-${DPDK_VER}.tar.xz -RUN tar -xpvf dpdk-${DPDK_VER}.tar.xz -ENV RTE_TARGET=x86_64-native-linuxapp-gcc -ENV RTE_SDK=${DPDK_DIR} -WORKDIR ${DPDK_DIR} - -COPY ./vhost_substitute.sh ./vhost_substitute.sh -RUN ./vhost_substitute.sh - -RUN yum install -y epel-release && yum install -y dnf -RUN dnf install -y meson ninja-build -RUN pip3 install pyelftools - -RUN meson build && ninja -C build && ninja -C build install && ldconfig - -EXPOSE 22 8474 - -WORKDIR /usr/src/ -ENV PKG_CONFIG_PATH /usr/local/lib64/pkgconfig -RUN git clone http://dpdk.org/git/apps/pktgen-dpdk -RUN yum install -y libpcap libpcap-devel -RUN cd pktgen-dpdk && make -j - diff --git a/tools/k8s/test-containers/trafficgen-pods/prox/Dockerfile b/tools/k8s/test-containers/trafficgen-pods/prox/Dockerfile deleted file mode 100644 index 3235e725..00000000 --- a/tools/k8s/test-containers/trafficgen-pods/prox/Dockerfile +++ /dev/null @@ -1,75 +0,0 @@ -## -## Copyright (c) 2019 Intel Corporation -## -## Licensed under the Apache License, Version 2.0 (the "License"); -## you may not use this file except in compliance with the License. -## You may obtain a copy of the License at -## -## http://www.apache.org/licenses/LICENSE-2.0 -## -## Unless required by applicable law or agreed to in writing, software -## distributed under the License is distributed on an "AS IS" BASIS, -## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -## See the License for the specific language governing permissions and -## limitations under the License. -## - -################################################## -# Build all components in separate builder image # -################################################## -FROM centos:7 as builder - -ARG BUILD_DIR=/opt/rapid - -COPY ./port_info ${BUILD_DIR}/port_info - -COPY ./deploycentostools.sh ${BUILD_DIR}/ -RUN chmod +x ${BUILD_DIR}/deploycentostools.sh \ - && ${BUILD_DIR}/deploycentostools.sh -k deploy - - -RUN rpm --import https://mirror.go-repo.io/centos/RPM-GPG-KEY-GO-REPO && curl -s https://mirror.go-repo.io/centos/go-repo.repo | tee /etc/yum.repos.d/go-repo.repo -RUN yum groupinstall -y "Development Tools" -RUN yum install -y golang; yum clean all - -## -## Download and Build APP-NetUtil -## -WORKDIR /root/go/src/ -RUN mkdir github.com && cd github.com && mkdir openshift && cd openshift && git clone https://github.com/openshift/app-netutil -WORKDIR /root/go/src/github.com/openshift/app-netutil -RUN make c_sample -#RUN cp bin/libnetutil_api.so /lib64/libnetutil_api.so; cp bin/libnetutil_api.h /usr/include/libnetutil_api.h - - -############################# -# Create slim runtime image # -############################# -FROM centos:7 - -ARG BUILD_DIR=/opt/rapid - -COPY ./deploycentostools.sh ${BUILD_DIR}/ -COPY --from=builder ${BUILD_DIR}/install_components.tgz ${BUILD_DIR}/install_components.tgz -COPY --from=builder ${BUILD_DIR}/src ${BUILD_DIR}/src -COPY --from=builder /root/go/src/github.com/openshift/app-netutil/bin/c_sample /usr/bin/c_sample -COPY --from=builder /root/go/src/github.com/openshift/app-netutil/bin/libnetutil_api.so /lib64/libnetutil_api.so -COPY --from=builder /root/go/src/github.com/openshift/app-netutil/bin/libnetutil_api.h /usr/include/libnetutil_api.h - -RUN chmod a+rwx ${BUILD_DIR} && chmod +x ${BUILD_DIR}/deploycentostools.sh \ - && ${BUILD_DIR}/deploycentostools.sh -k runtime_image - -RUN yum install -y pciutils iproute; yum clean all - -# Expose SSH and PROX ports -EXPOSE 22 8474 - -# Copy SSH keys -COPY ./rapid_rsa_key.pub /home/centos/.ssh/authorized_keys -COPY ./rapid_rsa_key.pub /root/.ssh/authorized_keys - -# Copy startup script -COPY ./start.sh /start.sh -RUN chmod +x /start.sh - -#ENTRYPOINT ["/start.sh"] diff --git a/tools/k8s/test-containers/trafficgen-pods/prox/deploycentostools.sh b/tools/k8s/test-containers/trafficgen-pods/prox/deploycentostools.sh deleted file mode 100644 index 80af81fd..00000000 --- a/tools/k8s/test-containers/trafficgen-pods/prox/deploycentostools.sh +++ /dev/null @@ -1,298 +0,0 @@ -#!/usr/bin/env bash -## -## Copyright (c) 2010-2020 Intel Corporation -## -## Licensed under the Apache License, Version 2.0 (the "License"); -## you may not use this file except in compliance with the License. -## You may obtain a copy of the License at -## -## http://www.apache.org/licenses/LICENSE-2.0 -## -## Unless required by applicable law or agreed to in writing, software -## distributed under the License is distributed on an "AS IS" BASIS, -## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -## See the License for the specific language governing permissions and -## limitations under the License. -## - -# Directory for package build -BUILD_DIR="/opt/rapid" -DPDK_VERSION="20.05" -MULTI_BUFFER_LIB_VER="0.52" -export RTE_SDK="${BUILD_DIR}/dpdk-${DPDK_VERSION}" -export RTE_TARGET="x86_64-native-linuxapp-gcc" - -# By default, do not update OS -OS_UPDATE="n" -# By default, asumming that we are in the VM -K8S_ENV="n" - -# If already running from root, no need for sudo -SUDO="" -[ $(id -u) -ne 0 ] && SUDO="sudo" - -function os_pkgs_install() -{ - ${SUDO} yum install -y deltarpm yum-utils - - # NASM repository for AESNI MB library - #${SUDO} yum-config-manager --add-repo http://www.nasm.us/nasm.repo - - [ "${OS_UPDATE}" == "y" ] && ${SUDO} yum update -y - ${SUDO} yum install -y git wget gcc unzip libpcap-devel ncurses-devel \ - libedit-devel lua-devel kernel-devel iperf3 pciutils \ - numactl-devel vim tuna openssl-devel wireshark \ - make driverctl - - ${SUDO} wget --no-check-certificate https://www.nasm.us/pub/nasm/releasebuilds/2.14.02/linux/nasm-2.14.02-0.fc27.x86_64.rpm - ${SUDO} rpm -ivh nasm-2.14.02-0.fc27.x86_64.rpm -} - -function k8s_os_pkgs_runtime_install() -{ - [ "${OS_UPDATE}" == "y" ] && ${SUDO} yum update -y - - # Install required dynamically linked libraries + required packages - ${SUDO} yum install -y numactl-libs libpcap openssh openssh-server \ - openssh-clients sudo -} - -function os_cfg() -{ - # huge pages to be used by DPDK - ${SUDO} sh -c '(echo "vm.nr_hugepages = 1024") > /etc/sysctl.conf' - - ${SUDO} sh -c '(echo "options vfio enable_unsafe_noiommu_mode=1") > /etc/modprobe.d/vfio.conf' - ${SUDO} sh -c '(echo "vfio") > /etc/modules-load.d/vfio.conf' - ${SUDO} sh -c '(echo "vfio-pci") > /etc/modules-load.d/vfio.conf' - # Enabling tuned with the realtime-virtual-guest profile - pushd ${BUILD_DIR} > /dev/null 2>&1 - wget http://linuxsoft.cern.ch/cern/centos/7/rt/x86_64/Packages/tuned-profiles-realtime-2.8.0-5.el7_4.2.noarch.rpm - wget http://linuxsoft.cern.ch/cern/centos/7/rt/x86_64/Packages/tuned-profiles-nfv-guest-2.8.0-5.el7_4.2.noarch.rpm - # Install with --nodeps. The latest CentOS cloud images come with a tuned version higher than 2.8. These 2 packages however - # do not depend on v2.8 and also work with tuned 2.9. Need to be careful in the future - ${SUDO} rpm -ivh ${BUILD_DIR}/tuned-profiles-realtime-2.8.0-5.el7_4.2.noarch.rpm --nodeps - ${SUDO} rpm -ivh ${BUILD_DIR}/tuned-profiles-nfv-guest-2.8.0-5.el7_4.2.noarch.rpm --nodeps - # Although we do no know how many cores the VM will have when begin deployed for real testing, we already put a number for the - # isolated CPUs so we can start the realtime-virtual-guest profile. If we don't, that command will fail. - # When the VM will be instantiated, the check_kernel_params service will check for the real number of cores available to this VM - # and update the realtime-virtual-guest-variables.conf accordingly. - echo "isolated_cores=1-3" | ${SUDO} tee -a /etc/tuned/realtime-virtual-guest-variables.conf - ${SUDO} tuned-adm profile realtime-virtual-guest - - # Install the check_tuned_params service to make sure that the grub cmd line has the right cpus in isolcpu. The actual number of cpu's - # assigned to this VM depends on the flavor used. We don't know at this time what that will be. - ${SUDO} chmod +x ${BUILD_DIR}/check_prox_system_setup.sh - ${SUDO} mv ${BUILD_DIR}/check_prox_system_setup.sh /usr/local/libexec/ - ${SUDO} mv ${BUILD_DIR}/check-prox-system-setup.service /etc/systemd/system/ - ${SUDO} systemctl daemon-reload - ${SUDO} systemctl enable check-prox-system-setup.service - popd > /dev/null 2>&1 -} - -function k8s_os_cfg() -{ - [ ! -f /etc/ssh/ssh_host_rsa_key ] && ssh-keygen -t rsa -f /etc/ssh/ssh_host_rsa_key -N '' - [ ! -f /etc/ssh/ssh_host_ecdsa_key ] && ssh-keygen -t ecdsa -f /etc/ssh/ssh_host_ecdsa_key -N '' - [ ! -f /etc/ssh/ssh_host_ed25519_key ] && ssh-keygen -t ed25519 -f /etc/ssh/ssh_host_ed25519_key -N '' - - [ ! -d /var/run/sshd ] && mkdir -p /var/run/sshd - - USER_NAME="centos" - USER_PWD="centos" - - useradd -m -d /home/${USER_NAME} -s /bin/bash -U ${USER_NAME} - echo "${USER_NAME}:${USER_PWD}" | chpasswd - usermod -aG wheel ${USER_NAME} - - echo "%wheel ALL=(ALL) NOPASSWD: ALL" > /etc/sudoers.d/wheelnopass -} - -function mblib_install() -{ - export AESNI_MULTI_BUFFER_LIB_PATH="${BUILD_DIR}/intel-ipsec-mb-${MULTI_BUFFER_LIB_VER}" - - # Downloading the Multi-buffer library. Note that the version to download is linked to the DPDK version being used - pushd ${BUILD_DIR} > /dev/null 2>&1 - wget https://github.com/01org/intel-ipsec-mb/archive/v${MULTI_BUFFER_LIB_VER}.zip - unzip v${MULTI_BUFFER_LIB_VER}.zip - pushd ${AESNI_MULTI_BUFFER_LIB_PATH} - make -j`getconf _NPROCESSORS_ONLN` - ${SUDO} make install - popd > /dev/null 2>&1 - popd > /dev/null 2>&1 -} - -function dpdk_install() -{ - # Build DPDK for the latest kernel installed - LATEST_KERNEL_INSTALLED=`ls -v1 /lib/modules/ | tail -1` - export RTE_KERNELDIR="/lib/modules/${LATEST_KERNEL_INSTALLED}/build" - - # Get and compile DPDK - pushd ${BUILD_DIR} > /dev/null 2>&1 - wget http://fast.dpdk.org/rel/dpdk-${DPDK_VERSION}.tar.xz - tar -xf ./dpdk-${DPDK_VERSION}.tar.xz - popd > /dev/null 2>&1 - - ${SUDO} ln -s ${RTE_SDK} ${BUILD_DIR}/dpdk - - pushd ${RTE_SDK} > /dev/null 2>&1 - make config T=${RTE_TARGET} - # Starting from DPDK 20.05, the IGB_UIO driver is not compiled by default. - # Uncomment the sed command to enable the driver compilation - #${SUDO} sed -i 's/CONFIG_RTE_EAL_IGB_UIO=n/c\/CONFIG_RTE_EAL_IGB_UIO=y' ${RTE_SDK}/build/.config - - # For Kubernetes environment we use host vfio module - if [ "${K8S_ENV}" == "y" ]; then - sed -i 's/CONFIG_RTE_EAL_IGB_UIO=y/CONFIG_RTE_EAL_IGB_UIO=n/g' ${RTE_SDK}/build/.config - sed -i 's/CONFIG_RTE_LIBRTE_KNI=y/CONFIG_RTE_LIBRTE_KNI=n/g' ${RTE_SDK}/build/.config - sed -i 's/CONFIG_RTE_KNI_KMOD=y/CONFIG_RTE_KNI_KMOD=n/g' ${RTE_SDK}/build/.config - fi - - # Compile with MB library - sed -i '/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n/c\CONFIG_RTE_LIBRTE_PMD_AESNI_MB=y' ${RTE_SDK}/build/.config - make -j`getconf _NPROCESSORS_ONLN` - ln -s ${RTE_SDK}/build ${RTE_SDK}/${RTE_TARGET} - popd > /dev/null 2>&1 -} - -function prox_compile() -{ - # Compile PROX - pushd ${BUILD_DIR}/samplevnf/VNFs/DPPD-PROX - COMMIT_ID=$(git rev-parse HEAD) - echo "${COMMIT_ID}" > ${BUILD_DIR}/commit_id - make -j`getconf _NPROCESSORS_ONLN` - ${SUDO} cp ${BUILD_DIR}/samplevnf/VNFs/DPPD-PROX/build/app/prox ${BUILD_DIR}/prox - popd > /dev/null 2>&1 -} - -function prox_install() -{ - # Clone PROX - pushd ${BUILD_DIR} > /dev/null 2>&1 - git clone https://git.opnfv.org/samplevnf - cp -R ./samplevnf/VNFs/DPPD-PROX/helper-scripts/rapid ./src - popd > /dev/null 2>&1 - prox_compile - - # Clean build folder - rm -rf ${BUILD_DIR}/samplevnf -} - -function port_info_build() -{ - [ ! -d ${BUILD_DIR}/port_info ] && echo "Skipping port_info compilation..." && return - - pushd ${BUILD_DIR}/port_info > /dev/null 2>&1 - make - ${SUDO} cp ${BUILD_DIR}/port_info/build/app/port_info_app ${BUILD_DIR}/port_info_app - popd > /dev/null 2>&1 -} - -function create_minimal_install() -{ - ldd ${BUILD_DIR}/prox | awk '{ if ($(NF-1) != "=>") print $(NF-1) }' >> ${BUILD_DIR}/list_of_install_components - - echo "${BUILD_DIR}/prox" >> ${BUILD_DIR}/list_of_install_components - echo "${BUILD_DIR}/port_info_app" >> ${BUILD_DIR}/list_of_install_components - echo "${BUILD_DIR}/commit_id" >> ${BUILD_DIR}/list_of_install_components - - tar -czvhf ${BUILD_DIR}/install_components.tgz -T ${BUILD_DIR}/list_of_install_components -} - -function cleanup() -{ - ${SUDO} yum autoremove -y - ${SUDO} yum clean all - ${SUDO} rm -rf /var/cache/yum -} - -function k8s_runtime_image() -{ - k8s_os_pkgs_runtime_install - k8s_os_cfg - cleanup - - pushd / > /dev/null 2>&1 - tar -xvf ${BUILD_DIR}/install_components.tgz --skip-old-files - popd > /dev/null 2>&1 - - ldconfig - - rm -rf ${BUILD_DIR}/install_components.tgz -} - -function print_usage() -{ - echo "Usage: ${0} [OPTIONS] [COMMAND]" - echo "Options:" - echo " -u, --update Full OS update" - echo " -k, --kubernetes Build for Kubernetes environment" - echo "Commands:" - echo " deploy Run through all deployment steps" - echo " compile PROX compile only" - echo " runtime_image Apply runtime configuration only" -} - -COMMAND="" -# Parse options and comman -for opt in "$@"; do - case ${opt} in - -u|--update) - echo 'Full OS update will be done!' - OS_UPDATE="y" - ;; - -k|--kubernetes) - echo "Kubernetes environment is set!" - K8S_ENV="y" - ;; - compile) - COMMAND="compile" - ;; - runtime_image) - COMMAND="runtime_image" - ;; - deploy) - COMMAND="deploy" - ;; - *) - echo "Unknown option/command ${opt}" - print_usage - exit 1 - ;; - esac -done - -if [ "${COMMAND}" == "compile" ]; then - echo "PROX compile only..." - prox_compile -elif [ "${COMMAND}" == "runtime_image" ]; then - echo "Runtime image intallation and configuration..." - k8s_runtime_image -elif [ "${COMMAND}" == "deploy" ]; then - [ ! -d ${BUILD_DIR} ] && ${SUDO} mkdir -p ${BUILD_DIR} - ${SUDO} chmod 0777 ${BUILD_DIR} - - os_pkgs_install - - if [ "${K8S_ENV}" == "y" ]; then - k8s_os_cfg - else - os_cfg - fi - - mblib_install - dpdk_install - prox_install - - if [ "${K8S_ENV}" == "y" ]; then - port_info_build - create_minimal_install - fi - - cleanup -else - print_usage -fi diff --git a/tools/k8s/test-containers/trafficgen-pods/prox/port_info/Makefile b/tools/k8s/test-containers/trafficgen-pods/prox/port_info/Makefile deleted file mode 100644 index f91cf156..00000000 --- a/tools/k8s/test-containers/trafficgen-pods/prox/port_info/Makefile +++ /dev/null @@ -1,42 +0,0 @@ -## -## Copyright (c) 2019 Intel Corporation -## -## Licensed under the Apache License, Version 2.0 (the "License"); -## you may not use this file except in compliance with the License. -## You may obtain a copy of the License at -## -## http://www.apache.org/licenses/LICENSE-2.0 -## -## Unless required by applicable law or agreed to in writing, software -## distributed under the License is distributed on an "AS IS" BASIS, -## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -## See the License for the specific language governing permissions and -## limitations under the License. -## - -ifeq ($(RTE_SDK),) -$(error "Please define RTE_SDK environment variable") -endif - -# Default target, can be overridden by command line or environment -RTE_TARGET ?= x86_64-native-linuxapp-gcc - -include $(RTE_SDK)/mk/rte.vars.mk - -# binary name -APP = port_info_app - -# all source are stored in SRCS-y -SRCS-y := port_info.c - -CFLAGS += $(WERROR_FLAGS) - -# workaround for a gcc bug with noreturn attribute -# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603 -ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) -CFLAGS_main.o += -Wno-return-type -endif - -EXTRA_CFLAGS += -O3 -g -Wfatal-errors - -include $(RTE_SDK)/mk/rte.extapp.mk diff --git a/tools/k8s/test-containers/trafficgen-pods/prox/port_info/port_info.c b/tools/k8s/test-containers/trafficgen-pods/prox/port_info/port_info.c deleted file mode 100644 index 79bd0c0b..00000000 --- a/tools/k8s/test-containers/trafficgen-pods/prox/port_info/port_info.c +++ /dev/null @@ -1,66 +0,0 @@ -/* -// Copyright (c) 2019 Intel Corporation -// -// Licensed under the Apache License, Version 2.0 (the "License"); -// you may not use this file except in compliance with the License. -// You may obtain a copy of the License at -// -// http://www.apache.org/licenses/LICENSE-2.0 -// -// Unless required by applicable law or agreed to in writing, software -// distributed under the License is distributed on an "AS IS" BASIS, -// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -// See the License for the specific language governing permissions and -// limitations under the License. -*/ - -#include -#include -#include -#include -#include - -static const uint16_t rx_rings = 1, tx_rings = 1; -static const struct rte_eth_conf port_conf = { .link_speeds = ETH_LINK_SPEED_AUTONEG }; - -static inline int -port_info(void) -{ - uint8_t port_id; - int ret_val; - - RTE_ETH_FOREACH_DEV(port_id) { - ret_val = rte_eth_dev_configure(port_id, rx_rings, tx_rings, &port_conf); - if (ret_val != 0) - return ret_val; - -#if RTE_VERSION < RTE_VERSION_NUM(19,8,0,0) - struct ether_addr addr; -#else - struct rte_ether_addr addr; -#endif - rte_eth_macaddr_get(port_id, &addr); - printf("Port %u MAC: %02" PRIx8 ":%02" PRIx8 ":%02" PRIx8 - ":%02" PRIx8 ":%02" PRIx8 ":%02" PRIx8 "\n", - (unsigned) port_id, - addr.addr_bytes[0], addr.addr_bytes[1], - addr.addr_bytes[2], addr.addr_bytes[3], - addr.addr_bytes[4], addr.addr_bytes[5]); - } - - return 0; -} - -int -main(int argc, char *argv[]) -{ - /* Initialize the Environment Abstraction Layer (EAL). */ - int ret = rte_eal_init(argc, argv); - if (ret < 0) - rte_exit(EXIT_FAILURE, "Error with EAL initialization\n"); - - argc -= ret; - argv += ret; - - return port_info(); -} diff --git a/tools/k8s/test-containers/trafficgen-pods/prox/rapid_rsa_key b/tools/k8s/test-containers/trafficgen-pods/prox/rapid_rsa_key deleted file mode 100644 index 6ecdb277..00000000 --- a/tools/k8s/test-containers/trafficgen-pods/prox/rapid_rsa_key +++ /dev/null @@ -1,49 +0,0 @@ ------BEGIN OPENSSH PRIVATE KEY----- -b3BlbnNzaC1rZXktdjEAAAAABG5vbmUAAAAEbm9uZQAAAAAAAAABAAACFwAAAAdzc2gtcn -NhAAAAAwEAAQAAAgEArNsWTFD70ljjL+WnXc0GblN7KliciiuGS2Cg/tcP8zZHvzk8/lkR -85EcXGpvYrHkTF1daZCbQUy3is0KvP27OholrxVv9HAn4BkA2ugWxp2FaePHKp0FBkMgup -GHFVhzeg4hA4oFtjpaM95ATMcWTB++7nul6dW+f5/vhxzya5ypEg19ywtZmDooiXz6fWoa -WgSqjy0NiLFoJEoNE5JYjz2XHTgBDKZ7Sr+oAto9/cOe3G5JsCyMFvCIIhrm/YIs8pwkqJ -sPMEPg6DbG6P6S1YbnL6rM/BswVjp1IoWpPVbmZhDbhlNSk/4ZDIrMtbKBQPHP90Ku+C5i -jY6ZNJ4gD7Cwm+ZLp4qdIqJoNoezmG8C0YvO8WvfMLRoyUChwSL3PmUGl02JdWJgYG/B37 -fJQbm80d6HOvAE5rvO5Z9dbwBvzZC0Yp5dX130OtNajpOhfBRN1qbIYYGgpIuLEgQUKC39 -/i1hGMNTOVDjJ4GNbiSUhUkbc64j0k2B+uYs947tfuwrotNumJIuDmwtqxUHwCuKNThUVh -A3U1tblCWMS6ExVY4zawElXBT/preiAYaFlzFuYoHjzuWXN0WOv08tiRJL1lrfMis8Z9so -fYc3qBSqlLgAsW5dtB5PMIy3JxXWqjFQIdgjlxWZ54Bu9t5fqPSggS+dNjDacl0v1e6ByB -kAAAdQW2kXgltpF4IAAAAHc3NoLXJzYQAAAgEArNsWTFD70ljjL+WnXc0GblN7KliciiuG -S2Cg/tcP8zZHvzk8/lkR85EcXGpvYrHkTF1daZCbQUy3is0KvP27OholrxVv9HAn4BkA2u -gWxp2FaePHKp0FBkMgupGHFVhzeg4hA4oFtjpaM95ATMcWTB++7nul6dW+f5/vhxzya5yp -Eg19ywtZmDooiXz6fWoaWgSqjy0NiLFoJEoNE5JYjz2XHTgBDKZ7Sr+oAto9/cOe3G5JsC -yMFvCIIhrm/YIs8pwkqJsPMEPg6DbG6P6S1YbnL6rM/BswVjp1IoWpPVbmZhDbhlNSk/4Z -DIrMtbKBQPHP90Ku+C5ijY6ZNJ4gD7Cwm+ZLp4qdIqJoNoezmG8C0YvO8WvfMLRoyUChwS -L3PmUGl02JdWJgYG/B37fJQbm80d6HOvAE5rvO5Z9dbwBvzZC0Yp5dX130OtNajpOhfBRN -1qbIYYGgpIuLEgQUKC39/i1hGMNTOVDjJ4GNbiSUhUkbc64j0k2B+uYs947tfuwrotNumJ -IuDmwtqxUHwCuKNThUVhA3U1tblCWMS6ExVY4zawElXBT/preiAYaFlzFuYoHjzuWXN0WO -v08tiRJL1lrfMis8Z9sofYc3qBSqlLgAsW5dtB5PMIy3JxXWqjFQIdgjlxWZ54Bu9t5fqP -SggS+dNjDacl0v1e6ByBkAAAADAQABAAACABLHepSv96vSnFwHxzcZnyk9SJRBLECWmfB2 -fwcwtjrmGsVbopS/eIPNsBcaOR+v0+239v4RB80AWLBrtk7yAfU+AfoTiiY0SSC/lqgxrs -fFNUlbxbeLd5BGmreqN9LJ2UHZZxzLUfOKQ2J/Mt0kg/ehO00Ngej1n8ydw5gaPPwT+QpN -DO2SPhmbt+u3+D7H2DUPbLhBXMcM/xNyOBl4PMbTGifCfdqx+5MTX11v+GwpZIjuMnNBY7 -baSu/pnE7OZbO14wWuUugbd8PCr7mAbtNj5Jn5JGv/SDEWCMPHYauYVU+hZTgitUX+xRnn -unXC/uffXYivZfLwlyRp6Zsd0r2z3dY+bjhZ/SBheAmP3FaKy4ZA1ggn7VHCM/RWywJJlP -/xdKHWQs2j/kF+s84Z5+eb6r1p3xBS7Dv3Lt9KQPN/nLciJNWYwUHiVXo3BtFw4IRosP+k -W4Km3bfmfs0yrgrAdypUeLHbD9fyYu/BjhdcDqCj9ntlxUnDfo4WQga1J1kY/5zUDOpVCV -LYit6y4SCvFM1H8mIHX9n3jxEfs1fdx52OhcahfGc7Qg8EbMJFt3CqXcc4ErVkUxC61sWX -7mfFqzp0eho1QrGU5a+1l9UaVTJhN1B0ruhEfdBm1FahcQ91ZEn2m6Wf1P0+RImI7m0cH1 -FZ0WDdX+DETUWNHr0BAAABAGEBn6UfyzTYtk/HWW8Px+ae60U4BJCcQ8m/ARSMGGLds2f3 -5NJjm6KliZJ+b7sdN4UYj2hm9zxjef+kwFXUEYmYVm16NufQRR1svF7YqLzNnOQ7eXluZS -S3SEj1siziCveQ6kyLYrfedNtX/TErdR5SFqcbuanMzd7mqw1vMpejoEGKriSpYOSohsZW -7Rkcej3XSR4jt5pzxfzUObcKrm5mWAYddINbflAYVswpT/LxNl7jduUsQd3Ul6fOBX4sBK -rWYMv3Qo4z25oShqvWOJbvvQ1voTOiDF8LTOu60/YbbOfF116J6BcWTHbwe8z+Du8SxdVi -1N4tFcadL7HqsZEAAAEBAN4ma7nbSI0fA3QM1IK9h5cN/h0qMk91Syh7+vFyNfe/DILFnJ -0TGNaYhAow1jNMOQKeyEJOfuZkeMdR9/ohtfwSvzSJml/k0JV9aIZHehncZOMt93Gi6WtC -+Os2owyhcXMJN7MbKo1e3Ln21OyaAJi6TAdwSDivFSytvNCKoX8NncQu/UIPzNQVJcrvJn -SZ+0AHFeuZVl9HgxZY1fUvIs24m9QnYH3HpMiYc2p8UT1hEOqq1bJpgKx9WHhj0fNCBsZ1 -6zTnCDa/HiDADHmlif6pyEu7nD+3MHAeGxS7LJjmMSvtbH/ltrYaz6wFSowlr/RiX7Z8pT -Ib1lf7KPYulYUAAAEBAMcxzoKSEZt/eYz5w4h9Bs6tdBEBnmSzwni8P0DTv1q0sDan1g4Q -+Mcuo42lSXS9aTmfI+hJDRSuRraLE9xzmxUJ+R2bQkpOLgG6QOF1uU36ZtMoxtptII8pXT -yQtIW2sHSz9Kgv16PFp98EaEfwzmdk/C8A6NxoGW7EpzAXzXZYLRSwgAr6wVE83jUsbIu5 -lAN6DG6vIm62PLsxmpDZuS5idQwxP8DP4itHMMRh2jE0+msQAWHRQ514nCTqeuy/ORbNSO -4A1yMy1KxXBH6hQ/oE8ZXqtBqJ3CbINPEyuLK9PYj9e2zABoEOcXTaJcvmVve97xhhw6om -zVgd4qw70oUAAAAVeWt5bHVsaW5AMGJkODI0NDk5MTYwAQIDBAUG ------END OPENSSH PRIVATE KEY----- diff --git a/tools/k8s/test-containers/trafficgen-pods/prox/rapid_rsa_key.pub b/tools/k8s/test-containers/trafficgen-pods/prox/rapid_rsa_key.pub deleted file mode 100644 index c735d178..00000000 --- a/tools/k8s/test-containers/trafficgen-pods/prox/rapid_rsa_key.pub +++ /dev/null @@ -1 +0,0 @@ -ssh-rsa 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 default@default diff --git a/tools/k8s/test-containers/trafficgen-pods/prox/start.sh b/tools/k8s/test-containers/trafficgen-pods/prox/start.sh deleted file mode 100755 index 7fbeedf8..00000000 --- a/tools/k8s/test-containers/trafficgen-pods/prox/start.sh +++ /dev/null @@ -1,39 +0,0 @@ -#!/usr/bin/env bash -## -## Copyright (c) 2010-2019 Intel Corporation -## -## Licensed under the Apache License, Version 2.0 (the "License"); -## you may not use this file except in compliance with the License. -## You may obtain a copy of the License at -## -## http://www.apache.org/licenses/LICENSE-2.0 -## -## Unless required by applicable law or agreed to in writing, software -## distributed under the License is distributed on an "AS IS" BASIS, -## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -## See the License for the specific language governing permissions and -## limitations under the License. -## - -function save_k8s_envs() -{ - printenv | grep "PCIDEVICE_INTEL_COM" > /opt/rapid/k8s_sriov_device_plugin_envs -} - -function create_tun() -{ - mkdir -p /dev/net - mknod /dev/net/tun c 10 200 - chmod 600 /dev/net/tun -} - -save_k8s_envs -create_tun - -# Ready for testing -touch /opt/rapid/system_ready_for_rapid - -# Start SSH server in background -/usr/sbin/sshd - -exec sleep infinity diff --git a/tools/k8s/test-containers/trafficgen-pods/prox/vhost_substitute.sh b/tools/k8s/test-containers/trafficgen-pods/prox/vhost_substitute.sh deleted file mode 100755 index b33f3521..00000000 --- a/tools/k8s/test-containers/trafficgen-pods/prox/vhost_substitute.sh +++ /dev/null @@ -1,19 +0,0 @@ -!/bin/bash - -# The first two commands update one of the 'if' checks to remove -# the check for 'master == VHOST_USER_SET_VRING_CALL'. -# -# Search for: " !(dev->flags & VIRTIO_DEV_VDPA_CONFIGURED) &&". -# Replace with: " !(dev->flags & VIRTIO_DEV_VDPA_CONFIGURED)) {". -sed -i -e 's/ !(dev->flags & VIRTIO_DEV_VDPA_CONFIGURED) &&/ !(dev->flags \& VIRTIO_DEV_VDPA_CONFIGURED)) {/g' lib/librte_vhost/vhost_user.c -# -# Search for line with: " msg.request.master == VHOST_USER_SET_VRING_CALL) {". -# Delete the line. -sed -i -e '/ msg\.request\.master == VHOST_USER_SET_VRING_CALL) {/d' lib/librte_vhost/vhost_user.c - - -# Force an RARP message to be sent out. -# -# Search for line with: " hw->started = true;". -# Append line: " virtio_notify_peers(dev);". -sed -i -e '/ hw->started = true;/a virtio_notify_peers(dev);' drivers/net/virtio/virtio_ethdev.c diff --git a/tools/k8s/test-containers/trafficgen-pods/trex/Dockerfile b/tools/k8s/test-containers/trafficgen-pods/trex/Dockerfile deleted file mode 100644 index 7258533a..00000000 --- a/tools/k8s/test-containers/trafficgen-pods/trex/Dockerfile +++ /dev/null @@ -1,46 +0,0 @@ -########################################################## -# Build app-netutil components in separate builder image # -########################################################## -FROM centos:7 as builder - -RUN rpm --import https://mirror.go-repo.io/centos/RPM-GPG-KEY-GO-REPO && curl -s https://mirror.go-repo.io/centos/go-repo.repo | tee /etc/yum.repos.d/go-repo.repo -RUN yum groupinstall -y "Development Tools" -RUN yum install -y wget numactl-devel git golang make; yum clean all - -## -## Download and Build APP-NetUtil -## -WORKDIR /root/go/src/ -RUN mkdir github.com && cd github.com && mkdir openshift && cd openshift && git clone https://github.com/openshift/app-netutil -WORKDIR /root/go/src/github.com/openshift/app-netutil -RUN make c_sample - -############################# -# Create slim runtime image # -############################# -FROM centos:7 - -ARG BUILD_DIR=/root - -COPY ./deploycentostools.sh ${BUILD_DIR}/ -COPY --from=builder /root/go/src/github.com/openshift/app-netutil/bin/c_sample /usr/bin/c_sample -COPY --from=builder /root/go/src/github.com/openshift/app-netutil/bin/libnetutil_api.so /lib64/libnetutil_api.so -COPY --from=builder /root/go/src/github.com/openshift/app-netutil/bin/libnetutil_api.h /usr/include/libnetutil_api.h - -RUN chmod a+rwx ${BUILD_DIR} && chmod +x ${BUILD_DIR}/deploycentostools.sh \ - && ${BUILD_DIR}/deploycentostools.sh - -WORKDIR /root -COPY trex_cfg.yaml.j2 /root/trex_cfg.yaml.j2 -COPY vppconf.py /root/vppconf.py -RUN wget --no-check-certificate https://trex-tgn.cisco.com/trex/release/latest; tar -xzvf latest; rm latest - -# Expose SSH -EXPOSE 22 - -# Copy SSH keys -COPY ./rapid_rsa_key.pub /home/centos/.ssh/authorized_keys -COPY ./rapid_rsa_key.pub /root/.ssh/authorized_keys - -RUN yum -y install python3 python3-pip; yum clean all -RUN pip3 install jinja2 diff --git a/tools/k8s/test-containers/trafficgen-pods/trex/deploycentostools.sh b/tools/k8s/test-containers/trafficgen-pods/trex/deploycentostools.sh deleted file mode 100644 index 69889b9d..00000000 --- a/tools/k8s/test-containers/trafficgen-pods/trex/deploycentostools.sh +++ /dev/null @@ -1,126 +0,0 @@ -#!/usr/bin/env bash -## -## Copyright (c) 2010-2020 Intel Corporation -## -## Licensed under the Apache License, Version 2.0 (the "License"); -## you may not use this file except in compliance with the License. -## You may obtain a copy of the License at -## -## http://www.apache.org/licenses/LICENSE-2.0 -## -## Unless required by applicable law or agreed to in writing, software -## distributed under the License is distributed on an "AS IS" BASIS, -## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -## See the License for the specific language governing permissions and -## limitations under the License. -## - -# Directory for package build -BUILD_DIR="/root" -DPDK_VERSION="20.05" -MULTI_BUFFER_LIB_VER="0.52" -export RTE_SDK="${BUILD_DIR}/dpdk-${DPDK_VERSION}" -export RTE_TARGET="x86_64-native-linuxapp-gcc" - -# By default, do not update OS -OS_UPDATE="n" -# By default, asumming that we are in the VM -K8S_ENV="y" - -# If already running from root, no need for sudo -SUDO="" -[ $(id -u) -ne 0 ] && SUDO="sudo" - -function os_pkgs_install() -{ - ${SUDO} yum install -y deltarpm yum-utils - - # NASM repository for AESNI MB library - #${SUDO} yum-config-manager --add-repo http://www.nasm.us/nasm.repo - - [ "${OS_UPDATE}" == "y" ] && ${SUDO} yum update -y - ${SUDO} yum install -y git wget gcc unzip libpcap-devel ncurses-devel \ - libedit-devel lua-devel kernel-devel iperf3 pciutils \ - numactl-devel vim tuna openssl-devel wireshark \ - make driverctl - - ${SUDO} wget https://www.nasm.us/pub/nasm/releasebuilds/2.14.02/linux/nasm-2.14.02-0.fc27.x86_64.rpm - ${SUDO} rpm -ivh nasm-2.14.02-0.fc27.x86_64.rpm -} - - -function os_pkgs_runtime_install() -{ - [ "${OS_UPDATE}" == "y" ] && ${SUDO} yum update -y - - # Install required dynamically linked libraries + required packages - ${SUDO} yum install -y numactl-libs libpcap openssh openssh-server \ - openssh-clients sudo iproute -} - - -function os_cfg() -{ - [ ! -f /etc/ssh/ssh_host_rsa_key ] && ssh-keygen -t rsa -f /etc/ssh/ssh_host_rsa_key -N '' - [ ! -f /etc/ssh/ssh_host_ecdsa_key ] && ssh-keygen -t ecdsa -f /etc/ssh/ssh_host_ecdsa_key -N '' - [ ! -f /etc/ssh/ssh_host_ed25519_key ] && ssh-keygen -t ed25519 -f /etc/ssh/ssh_host_ed25519_key -N '' - - [ ! -d /var/run/sshd ] && mkdir -p /var/run/sshd - - USER_NAME="centos" - USER_PWD="centos" - - useradd -m -d /home/${USER_NAME} -s /bin/bash -U ${USER_NAME} - echo "${USER_NAME}:${USER_PWD}" | chpasswd - usermod -aG wheel ${USER_NAME} - - echo "%wheel ALL=(ALL) NOPASSWD: ALL" > /etc/sudoers.d/wheelnopass -} - -function dpdk_install() -{ - # Build DPDK for the latest kernel installed - LATEST_KERNEL_INSTALLED=`ls -v1 /lib/modules/ | tail -1` - export RTE_KERNELDIR="/lib/modules/${LATEST_KERNEL_INSTALLED}/build" - - # Get and compile DPDK - pushd ${BUILD_DIR} > /dev/null 2>&1 - wget http://fast.dpdk.org/rel/dpdk-${DPDK_VERSION}.tar.xz - tar -xf ./dpdk-${DPDK_VERSION}.tar.xz - popd > /dev/null 2>&1 - - ${SUDO} ln -s ${RTE_SDK} ${BUILD_DIR}/dpdk - - pushd ${RTE_SDK} > /dev/null 2>&1 - make config T=${RTE_TARGET} - # Starting from DPDK 20.05, the IGB_UIO driver is not compiled by default. - # Uncomment the sed command to enable the driver compilation - #${SUDO} sed -i 's/CONFIG_RTE_EAL_IGB_UIO=n/c\/CONFIG_RTE_EAL_IGB_UIO=y' ${RTE_SDK}/build/.config - - # For Kubernetes environment we use host vfio module - if [ "${K8S_ENV}" == "y" ]; then - sed -i 's/CONFIG_RTE_EAL_IGB_UIO=y/CONFIG_RTE_EAL_IGB_UIO=n/g' ${RTE_SDK}/build/.config - sed -i 's/CONFIG_RTE_LIBRTE_KNI=y/CONFIG_RTE_LIBRTE_KNI=n/g' ${RTE_SDK}/build/.config - sed -i 's/CONFIG_RTE_KNI_KMOD=y/CONFIG_RTE_KNI_KMOD=n/g' ${RTE_SDK}/build/.config - fi - - # Compile with MB library if reqd. - # sed -i '/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n/c\CONFIG_RTE_LIBRTE_PMD_AESNI_MB=y' ${RTE_SDK}/build/.config - make -j`getconf _NPROCESSORS_ONLN` - ln -s ${RTE_SDK}/build ${RTE_SDK}/${RTE_TARGET} - popd > /dev/null 2>&1 -} - -function cleanup() -{ - ${SUDO} yum autoremove -y - ${SUDO} yum clean all - ${SUDO} rm -rf /var/cache/yum - ${SUDO} rm ${BUILD_DIR}/*.xz -} - -os_pkgs_install -os_cfg -dpdk_install -os_pkgs_runtime_install -cleanup diff --git a/tools/k8s/test-containers/trafficgen-pods/trex/rapid_rsa_key b/tools/k8s/test-containers/trafficgen-pods/trex/rapid_rsa_key deleted file mode 100644 index 6ecdb277..00000000 --- a/tools/k8s/test-containers/trafficgen-pods/trex/rapid_rsa_key +++ /dev/null @@ -1,49 +0,0 @@ ------BEGIN OPENSSH PRIVATE KEY----- -b3BlbnNzaC1rZXktdjEAAAAABG5vbmUAAAAEbm9uZQAAAAAAAAABAAACFwAAAAdzc2gtcn -NhAAAAAwEAAQAAAgEArNsWTFD70ljjL+WnXc0GblN7KliciiuGS2Cg/tcP8zZHvzk8/lkR -85EcXGpvYrHkTF1daZCbQUy3is0KvP27OholrxVv9HAn4BkA2ugWxp2FaePHKp0FBkMgup -GHFVhzeg4hA4oFtjpaM95ATMcWTB++7nul6dW+f5/vhxzya5ypEg19ywtZmDooiXz6fWoa -WgSqjy0NiLFoJEoNE5JYjz2XHTgBDKZ7Sr+oAto9/cOe3G5JsCyMFvCIIhrm/YIs8pwkqJ -sPMEPg6DbG6P6S1YbnL6rM/BswVjp1IoWpPVbmZhDbhlNSk/4ZDIrMtbKBQPHP90Ku+C5i -jY6ZNJ4gD7Cwm+ZLp4qdIqJoNoezmG8C0YvO8WvfMLRoyUChwSL3PmUGl02JdWJgYG/B37 -fJQbm80d6HOvAE5rvO5Z9dbwBvzZC0Yp5dX130OtNajpOhfBRN1qbIYYGgpIuLEgQUKC39 -/i1hGMNTOVDjJ4GNbiSUhUkbc64j0k2B+uYs947tfuwrotNumJIuDmwtqxUHwCuKNThUVh -A3U1tblCWMS6ExVY4zawElXBT/preiAYaFlzFuYoHjzuWXN0WOv08tiRJL1lrfMis8Z9so -fYc3qBSqlLgAsW5dtB5PMIy3JxXWqjFQIdgjlxWZ54Bu9t5fqPSggS+dNjDacl0v1e6ByB -kAAAdQW2kXgltpF4IAAAAHc3NoLXJzYQAAAgEArNsWTFD70ljjL+WnXc0GblN7KliciiuG -S2Cg/tcP8zZHvzk8/lkR85EcXGpvYrHkTF1daZCbQUy3is0KvP27OholrxVv9HAn4BkA2u -gWxp2FaePHKp0FBkMgupGHFVhzeg4hA4oFtjpaM95ATMcWTB++7nul6dW+f5/vhxzya5yp -Eg19ywtZmDooiXz6fWoaWgSqjy0NiLFoJEoNE5JYjz2XHTgBDKZ7Sr+oAto9/cOe3G5JsC -yMFvCIIhrm/YIs8pwkqJsPMEPg6DbG6P6S1YbnL6rM/BswVjp1IoWpPVbmZhDbhlNSk/4Z -DIrMtbKBQPHP90Ku+C5ijY6ZNJ4gD7Cwm+ZLp4qdIqJoNoezmG8C0YvO8WvfMLRoyUChwS -L3PmUGl02JdWJgYG/B37fJQbm80d6HOvAE5rvO5Z9dbwBvzZC0Yp5dX130OtNajpOhfBRN -1qbIYYGgpIuLEgQUKC39/i1hGMNTOVDjJ4GNbiSUhUkbc64j0k2B+uYs947tfuwrotNumJ -IuDmwtqxUHwCuKNThUVhA3U1tblCWMS6ExVY4zawElXBT/preiAYaFlzFuYoHjzuWXN0WO -v08tiRJL1lrfMis8Z9sofYc3qBSqlLgAsW5dtB5PMIy3JxXWqjFQIdgjlxWZ54Bu9t5fqP -SggS+dNjDacl0v1e6ByBkAAAADAQABAAACABLHepSv96vSnFwHxzcZnyk9SJRBLECWmfB2 -fwcwtjrmGsVbopS/eIPNsBcaOR+v0+239v4RB80AWLBrtk7yAfU+AfoTiiY0SSC/lqgxrs -fFNUlbxbeLd5BGmreqN9LJ2UHZZxzLUfOKQ2J/Mt0kg/ehO00Ngej1n8ydw5gaPPwT+QpN -DO2SPhmbt+u3+D7H2DUPbLhBXMcM/xNyOBl4PMbTGifCfdqx+5MTX11v+GwpZIjuMnNBY7 -baSu/pnE7OZbO14wWuUugbd8PCr7mAbtNj5Jn5JGv/SDEWCMPHYauYVU+hZTgitUX+xRnn -unXC/uffXYivZfLwlyRp6Zsd0r2z3dY+bjhZ/SBheAmP3FaKy4ZA1ggn7VHCM/RWywJJlP -/xdKHWQs2j/kF+s84Z5+eb6r1p3xBS7Dv3Lt9KQPN/nLciJNWYwUHiVXo3BtFw4IRosP+k -W4Km3bfmfs0yrgrAdypUeLHbD9fyYu/BjhdcDqCj9ntlxUnDfo4WQga1J1kY/5zUDOpVCV -LYit6y4SCvFM1H8mIHX9n3jxEfs1fdx52OhcahfGc7Qg8EbMJFt3CqXcc4ErVkUxC61sWX -7mfFqzp0eho1QrGU5a+1l9UaVTJhN1B0ruhEfdBm1FahcQ91ZEn2m6Wf1P0+RImI7m0cH1 -FZ0WDdX+DETUWNHr0BAAABAGEBn6UfyzTYtk/HWW8Px+ae60U4BJCcQ8m/ARSMGGLds2f3 -5NJjm6KliZJ+b7sdN4UYj2hm9zxjef+kwFXUEYmYVm16NufQRR1svF7YqLzNnOQ7eXluZS -S3SEj1siziCveQ6kyLYrfedNtX/TErdR5SFqcbuanMzd7mqw1vMpejoEGKriSpYOSohsZW -7Rkcej3XSR4jt5pzxfzUObcKrm5mWAYddINbflAYVswpT/LxNl7jduUsQd3Ul6fOBX4sBK -rWYMv3Qo4z25oShqvWOJbvvQ1voTOiDF8LTOu60/YbbOfF116J6BcWTHbwe8z+Du8SxdVi -1N4tFcadL7HqsZEAAAEBAN4ma7nbSI0fA3QM1IK9h5cN/h0qMk91Syh7+vFyNfe/DILFnJ -0TGNaYhAow1jNMOQKeyEJOfuZkeMdR9/ohtfwSvzSJml/k0JV9aIZHehncZOMt93Gi6WtC -+Os2owyhcXMJN7MbKo1e3Ln21OyaAJi6TAdwSDivFSytvNCKoX8NncQu/UIPzNQVJcrvJn -SZ+0AHFeuZVl9HgxZY1fUvIs24m9QnYH3HpMiYc2p8UT1hEOqq1bJpgKx9WHhj0fNCBsZ1 -6zTnCDa/HiDADHmlif6pyEu7nD+3MHAeGxS7LJjmMSvtbH/ltrYaz6wFSowlr/RiX7Z8pT -Ib1lf7KPYulYUAAAEBAMcxzoKSEZt/eYz5w4h9Bs6tdBEBnmSzwni8P0DTv1q0sDan1g4Q -+Mcuo42lSXS9aTmfI+hJDRSuRraLE9xzmxUJ+R2bQkpOLgG6QOF1uU36ZtMoxtptII8pXT -yQtIW2sHSz9Kgv16PFp98EaEfwzmdk/C8A6NxoGW7EpzAXzXZYLRSwgAr6wVE83jUsbIu5 -lAN6DG6vIm62PLsxmpDZuS5idQwxP8DP4itHMMRh2jE0+msQAWHRQ514nCTqeuy/ORbNSO -4A1yMy1KxXBH6hQ/oE8ZXqtBqJ3CbINPEyuLK9PYj9e2zABoEOcXTaJcvmVve97xhhw6om -zVgd4qw70oUAAAAVeWt5bHVsaW5AMGJkODI0NDk5MTYwAQIDBAUG ------END OPENSSH PRIVATE KEY----- diff --git a/tools/k8s/test-containers/trafficgen-pods/trex/rapid_rsa_key.pub b/tools/k8s/test-containers/trafficgen-pods/trex/rapid_rsa_key.pub deleted file mode 100644 index c735d178..00000000 --- a/tools/k8s/test-containers/trafficgen-pods/trex/rapid_rsa_key.pub +++ /dev/null @@ -1 +0,0 @@ -ssh-rsa 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 default@default diff --git a/tools/k8s/test-containers/trafficgen-pods/trex/trex_cfg.yaml b/tools/k8s/test-containers/trafficgen-pods/trex/trex_cfg.yaml deleted file mode 100644 index 384817a4..00000000 --- a/tools/k8s/test-containers/trafficgen-pods/trex/trex_cfg.yaml +++ /dev/null @@ -1,10 +0,0 @@ -- port_limit : 2 - version : 2 - c : 8 - interfaces : ["--vdev=net_memif0,socket=/var/lib/cni/usrspcni/memif--net1.sock,role=slave,id=0", "--vdev=net_memif1,socket=/var/lib/cni/usrspcni/memif--net2.sock,role=slave,id=1"] # list of the interfaces - port_info : # set eh mac addr - - - ip : 1.1.1.1 - default_gw : 2.2.2.2 - - ip : 2.2.2.2 - default_gw : 1.1.1.1 diff --git a/tools/k8s/test-containers/trafficgen-pods/trex/trex_cfg.yaml.j2 b/tools/k8s/test-containers/trafficgen-pods/trex/trex_cfg.yaml.j2 deleted file mode 100644 index 9a42bd97..00000000 --- a/tools/k8s/test-containers/trafficgen-pods/trex/trex_cfg.yaml.j2 +++ /dev/null @@ -1,8 +0,0 @@ -- port_limit : 2 - version : 2 - interfaces : ["--vdev=net_memif0,socket={{data.if1}},role=master", "--vdev=net_memif1,socket={{data.if2}},role=master"] # list of the interfaces - port_info : # set eth mac addr - - dest_mac : "3c:fd:fe:b4:41:09" # port 0 - src_mac : "3c:fd:fe:b4:41:08" - - dest_mac : "3c:fd:fe:b4:41:08" # port 1 - src_mac : "3c:fd:fe:b4:41:09" diff --git a/tools/k8s/test-containers/trafficgen-pods/trex/vppconf.py b/tools/k8s/test-containers/trafficgen-pods/trex/vppconf.py deleted file mode 100644 index ad7d63d8..00000000 --- a/tools/k8s/test-containers/trafficgen-pods/trex/vppconf.py +++ /dev/null @@ -1,70 +0,0 @@ -import select -import subprocess -import logging -import threading -import sys -import os -import locale -import time -from jinja2 import Environment, FileSystemLoader - -CMD_PREFIX = 'cmd : ' -VERBOSITY = 'info' -_logger = logging.getLogger(__name__) - -def run_task(cmd, logger=_logger, msg=None, check_error=False): - """Run task, report errors and log overall status. - - Run given task using ``subprocess.Popen``. Log the commands - used and any errors generated. Prints stdout to screen if - in verbose mode and returns it regardless. Prints stderr to - screen always. - - :param cmd: Exact command to be executed - :param logger: Logger to write details to - :param msg: Message to be shown to user - :param check_error: Throw exception on error - - :returns: (stdout, stderr) - """ - def handle_error(exception): - """Handle errors by logging and optionally raising an exception. - """ - logger.error( - 'Unable to execute %(cmd)s. Exception: %(exception)s', - {'cmd': ' '.join(cmd), 'exception': exception}) - if check_error: - raise exception - - try: - proc = subprocess.Popen(map(os.path.expanduser, cmd), - stdout=subprocess.PIPE, - stderr=subprocess.PIPE) - output = proc.communicate()[0].decode("utf-8") - except OSError as ex: - handle_error(ex) - else: - if proc.returncode: - ex = subprocess.CalledProcessError(proc.returncode, cmd, stderr) - handle_error(ex) - return output - -ifaces = [] -sout = run_task(['/usr/bin/c_sample']) -if sout: - for line in sout.split('\n'): - if 'Path=' in line: - print(line) - field = line.split(' ')[-1].split('=')[-1] - ifaces.append(field) -ifacesdir = { - 'if1' : ifaces[0], - 'if2' : ifaces[1]} - -if len(ifaces) == 2: - file_loader = FileSystemLoader('./') - env = Environment(loader = file_loader) - fileref = env.get_template('./trex_cfg.yaml.j2') - renderedcon = fileref.render(data=ifacesdir) - with open('/etc/trex_cfg.yaml', "w+") as fh: - fh.write(renderedcon) -- cgit 1.2.3-korg