From dba37f2ec6b915649a10d8dae550bfd0291e4584 Mon Sep 17 00:00:00 2001 From: "Sridhar K. N. Rao" Date: Wed, 23 Nov 2016 20:28:13 +0530 Subject: conf:Traffic-type naming convention and consistency Following changes are added following first review 1. Descriptions in integration/01_testcases.conf 2. Comment in conf/01_testcases.conf 3. Checking all cases of traffic types in traffic_controller_rfc2544.py 4. Removing whitespaces 5. Missing changes (throughput->rfc2544_throughput) 6. Syntax error in core/traffic_controller_rfc2544.py Currently the traffic-type values that are provided as part of the test case definition needs some fix to support additional traffic - apart from rfc2544. The Current and the proposed changed is summarized in the below table: |--------------------------------------------------------------------| | Parameter | Existing traffic_type value | Changed to | ---------------------------------------------------------------------- | Throughput | rfc2544 OR throughput | rfc2544_throughput | ---------------------------------------------------------------------- | Back2Back | back2back | rfc2544_back2back | ---------------------------------------------------------------------- | Continuous | continuous | rfc2544_continuous | ---------------------------------------------------------------------- JIRA: VSPERF-420 Change-Id: I22bd897f6389d2b568a6a3735c67f0003e813445 Signed-off-by: Sridhar K. N. Rao --- docs/userguide/teststeps.rst | 16 ++++++++++------ docs/userguide/testusage.rst | 9 +++++---- 2 files changed, 15 insertions(+), 10 deletions(-) (limited to 'docs/userguide') diff --git a/docs/userguide/teststeps.rst b/docs/userguide/teststeps.rst index 65a25b0a..c00a2749 100644 --- a/docs/userguide/teststeps.rst +++ b/docs/userguide/teststeps.rst @@ -122,9 +122,9 @@ of supported objects and their most common functions follows: .. code-block:: python - ['trafficgen', 'send_traffic', {'traffic_type' : 'throughput'}] + ['trafficgen', 'send_traffic', {'traffic_type' : 'rfc2544_throughput'}] - ['trafficgen', 'send_traffic', {'traffic_type' : 'back2back', 'bidir' : 'True'}] + ['trafficgen', 'send_traffic', {'traffic_type' : 'rfc2544_back2back', 'bidir' : 'True'}] * ``settings`` - reads or modifies VSPERF configuration @@ -344,7 +344,8 @@ IP address = 90.90.90.90 will be forwarded to the port created at the STEP #2. ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \ 'dl_type': '0x0800', 'nw_dst': '90.90.90.90', \ 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}], - ['trafficgen', 'send_traffic', {'traffic_type' : 'continuous'}], + ['trafficgen', 'send_traffic', \ + {'traffic_type' : 'rfc2544_continuous'}], ['vswitch', 'dump_flows', 'int_br0'], # STEP 5 ['vswitch', 'del_flow', 'int_br0'], # STEP 7 == del-flows ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'], @@ -393,7 +394,8 @@ That is accomplished by using "Stream Type" and "MultiStream" keywords. 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '3', \ 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}], # Send mono-dir traffic - ['trafficgen', 'send_traffic', {'traffic_type' : 'continuous', \ + ['trafficgen', 'send_traffic', \ + {'traffic_type' : 'rfc2544_continuous', \ 'bidir' : 'False'}], # Clean up ['vswitch', 'del_flow', 'int_br0'], @@ -505,7 +507,8 @@ loopback application by a configuration option ``GUEST_LOOPBACK``. 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}], # Start VMs ['vnf1', 'start'], - ['trafficgen', 'send_traffic', {'traffic_type' : 'continuous', \ + ['trafficgen', 'send_traffic', \ + {'traffic_type' : 'rfc2544_continuous', \ 'bidir' : 'False'}], ['vnf1', 'stop'], # Clean up @@ -578,7 +581,8 @@ destination UDP port. # Start VMs ['vnf1', 'start'], # STEP 16 ['vnf2', 'start'], # STEP 17 - ['trafficgen', 'send_traffic', {'traffic_type' : 'continuous', \ + ['trafficgen', 'send_traffic', \ + {'traffic_type' : 'rfc2544_continuous', \ 'bidir' : 'False'}], ['vnf1', 'stop'], ['vnf2', 'stop'], diff --git a/docs/userguide/testusage.rst b/docs/userguide/testusage.rst index f446f261..46413f03 100755 --- a/docs/userguide/testusage.rst +++ b/docs/userguide/testusage.rst @@ -674,9 +674,10 @@ Supported CLI options useful for traffic generator configuration are: .. code-block:: console - 'traffic_type' - One of the supported traffic types. E.g. rfc2544, - back2back or continuous - Default value is "rfc2544". + 'traffic_type' - One of the supported traffic types. E.g. + rfc2544_throughput, + rfc2544_back2back or rfc2544_continuous + Default value is "rfc2544_throughput". 'bidirectional' - Specifies if generated traffic will be full-duplex (true) or half-duplex (false) Default value is "false". @@ -697,7 +698,7 @@ Example of execution of VSPERF in "trafficgen" mode: .. code-block:: console $ ./vsperf -m trafficgen --trafficgen IxNet --conf-file vsperf.conf \ - --test-params "traffic_type=continuous;bidirectional=True;iload=60" + --test-params "traffic_type=rfc2544_continuous;bidirectional=True;iload=60" Code change verification by pylint ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -- cgit 1.2.3-korg