From dba37f2ec6b915649a10d8dae550bfd0291e4584 Mon Sep 17 00:00:00 2001 From: "Sridhar K. N. Rao" Date: Wed, 23 Nov 2016 20:28:13 +0530 Subject: conf:Traffic-type naming convention and consistency Following changes are added following first review 1. Descriptions in integration/01_testcases.conf 2. Comment in conf/01_testcases.conf 3. Checking all cases of traffic types in traffic_controller_rfc2544.py 4. Removing whitespaces 5. Missing changes (throughput->rfc2544_throughput) 6. Syntax error in core/traffic_controller_rfc2544.py Currently the traffic-type values that are provided as part of the test case definition needs some fix to support additional traffic - apart from rfc2544. The Current and the proposed changed is summarized in the below table: |--------------------------------------------------------------------| | Parameter | Existing traffic_type value | Changed to | ---------------------------------------------------------------------- | Throughput | rfc2544 OR throughput | rfc2544_throughput | ---------------------------------------------------------------------- | Back2Back | back2back | rfc2544_back2back | ---------------------------------------------------------------------- | Continuous | continuous | rfc2544_continuous | ---------------------------------------------------------------------- JIRA: VSPERF-420 Change-Id: I22bd897f6389d2b568a6a3735c67f0003e813445 Signed-off-by: Sridhar K. N. Rao --- docs/design/trafficgen_integration_guide.rst | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'docs/design') diff --git a/docs/design/trafficgen_integration_guide.rst b/docs/design/trafficgen_integration_guide.rst index 266c6bc0..9bb0e825 100644 --- a/docs/design/trafficgen_integration_guide.rst +++ b/docs/design/trafficgen_integration_guide.rst @@ -196,7 +196,8 @@ functions: which are discussed in detail at `integration tests userguide`_ * param **traffic_type**: One of the supported traffic types, - e.g. **rfc2544**, **continuous** or **back2back**. + e.g. **rfc2544_throughput**, **rfc2544_continuous** + or **rfc2544_back2back**. * param **frame_rate**: Defines desired percentage of frame rate used during continuous stream tests. It can be set by test parameter iLoad or by CLI parameter iload. -- cgit 1.2.3-korg