From d10939601932809da1d5ae717323ac33a72a0d75 Mon Sep 17 00:00:00 2001 From: Martin Klozik Date: Tue, 6 Jun 2017 15:02:07 +0100 Subject: ci: Plot graphs from CI results CI scripts were enhanced to plot graphs from last results and push them into artifactory. Graphs will be updated by every CI run and can be included e.g. in VSPERF results WIKI page. Change-Id: Iada4acd7cc2c3dc73b9f30a429fe2b53020c4d3b Signed-off-by: Martin Klozik --- ci/build-vsperf.sh | 22 ++++++-- ci/plot-results.sh | 146 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 165 insertions(+), 3 deletions(-) create mode 100755 ci/plot-results.sh (limited to 'ci') diff --git a/ci/build-vsperf.sh b/ci/build-vsperf.sh index 5a3ed8c1..5cc4385e 100755 --- a/ci/build-vsperf.sh +++ b/ci/build-vsperf.sh @@ -1,6 +1,6 @@ #!/bin/bash # -# Copyright 2015-2016 Intel Corporation. +# Copyright 2015-2017 Intel Corporation. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -40,6 +40,7 @@ LOG_FILE_PREFIX="/tmp/vsperf_build" DATE=$(date -u +"%Y-%m-%d_%H-%M-%S") BRANCH=${GIT_BRANCH##*/} VSPERFENV_DIR="$HOME/vsperfenv" +RESULTS_ARCHIVE="$HOME/ci_results_archive" # CI job specific configuration # VERIFY - run basic set of TCs with default settings @@ -282,8 +283,8 @@ function generate_report() { # prepare final tarball with all logs... tar --exclude "${TEST_REPORT_TARBALL}" -czf "${TEST_REPORT_LOG_DIR}/${TEST_REPORT_TARBALL}" $(find "${TEST_REPORT_LOG_DIR}" -mindepth 1 -maxdepth 1 -type d) - # ...and remove original log files - find "${TEST_REPORT_LOG_DIR}" -mindepth 1 -maxdepth 1 -type d -exec rm -rf \{\} \; + # ...and move original log files to the archive directory + find "${TEST_REPORT_LOG_DIR}" -mindepth 1 -maxdepth 1 -type d -exec mv \{\} ${RESULTS_ARCHIVE} \; # clone opnfvdocs repository echo "Cloning opnfvdocs repository..." @@ -304,6 +305,19 @@ function generate_report() { fi } +# generates graphs from recent test results +function generate_and_push_graphs() { + # create graphs from results in archive directory + ./ci/plot-results.sh "phy2phy_tput back2back pvp_tput pvvp_tput" ",OvsDpdkVhost," $RESULTS_ARCHIVE + + # push graphs into artifactory + if ls *png &> /dev/null ; then + gsutil cp *png gs://artifacts.opnfv.org/logs/vswitchperf/intel-pod12/graphs/ + else + echo "Graphs were not created." + fi +} + # pushes test report and logs collected during test execution into artifactory function push_results_to_artifactory() { # clone releng repository @@ -507,6 +521,8 @@ case $1 in push_results_to_artifactory + generate_and_push_graphs + cleanup exit $EXIT diff --git a/ci/plot-results.sh b/ci/plot-results.sh new file mode 100755 index 00000000..78855537 --- /dev/null +++ b/ci/plot-results.sh @@ -0,0 +1,146 @@ +#!/bin/bash +# +# Copyright 2017 Intel Corporation. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +# Script for graphical representation of VSPERF results +# +# Usage: +# ./create_graph ["test names" [filter [directory]]] +# +# where: +# "test names" is a !!! quoted !!! string with vsperf testcase names separated +# by spaces +# Default value: "phy2phy_tput" +# +# "filter" is used to select matching VSPERF results; Its value +# will be used as PATTERN of grep command executed on selected +# csv result files. +# Default value: ",OvsDpdkVhost," +# +# "directory" is a directory name, where vsperf results (i.e. results_* +# subdirectories) are located +# Default value: "/tmp" +# +# Example of invocation: +# ./create_graph "phy2phy_tput phy2phy_cont pvp_cont pvvp_cont" ",OvsVanilla," + +TESTS="phy2phy_tput" # default set of TCs to be plotted +FILTER=",OvsDpdkVhost," # default filter to be applied on matching CSV files +NUMBER_OF_RESULTS=5 # max number of recent results to be compared in graph +CSV_RESULT_COL=2 # column number with result to be plotted, e.g. 2 for rx_throughput_fps +B2B_CSV_RESULT_COL=1 # column number with result to be plotted for back2back TCs +CSV_PKT_SIZE_COL=12 # column number with frame/packet size +B2B_CSV_PKT_SIZE_COL=4 # column number with frame/packet size for back2back TCs +NUMBER_OF_PKT_SIZES=0 # to be detected automatically +MAX_NUMBER_OF_PKT_SIZES=10 +DIR="/tmp" # directory where vsperf results are stored +PNG_PREFIX='vsperf_' + +function clean_data() { + rm -rf *csv + rm -rf *plot + rm -rf *png +} + +function prepare_data() { + for test_name in $TESTS; do + FIRST=1 + CSV_LIST=`grep -r ",${test_name}," ${DIR}/results_*/*csv | grep $FILTER | cut -d':' -f1 | uniq | sort | tail -n ${NUMBER_OF_RESULTS}` + for result_file in $CSV_LIST ; do + tmp_dir=`dirname $result_file` + TIMESTAMP=`basename $tmp_dir | cut -d'_' -f2-` + if [ $FIRST -eq 1 ] ; then + NUMBER_OF_PKT_SIZES=$((`wc -l ${result_file} | cut -d' ' -f1`-1)) + if [ $NUMBER_OF_PKT_SIZES -gt $MAX_NUMBER_OF_PKT_SIZES ] ; then + NUMBER_OF_PKT_SIZES=$MAX_NUMBER_OF_PKT_SIZES + fi + if grep back2back ${result_file} &> /dev/null ; then + PKT_SIZE_COL=$B2B_CSV_PKT_SIZE_COL + RES_COL=$B2B_CSV_RESULT_COL + else + PKT_SIZE_COL=$CSV_PKT_SIZE_COL + RES_COL=$CSV_RESULT_COL + fi + RESULT_HEADER=`tail -n+2 ${result_file} | head -n ${NUMBER_OF_PKT_SIZES} | cut -d',' -f${PKT_SIZE_COL} | paste -d',' -s` + echo "Date/PKT Size [B],${RESULT_HEADER}" > "${test_name}.csv" + FIRST=0 + fi + RESULT_4ALL_PKT_SIZES=`tail -n+2 ${result_file} | head -n ${NUMBER_OF_PKT_SIZES} | cut -d',' -f${RES_COL} | paste -d',' -s` + echo "${TIMESTAMP},${RESULT_4ALL_PKT_SIZES}" >> "${test_name}.csv" + done + done +} + +function plot_data() { + echo "Created graphs:" + SUFFIX=`echo $FILTER | tr -d -C [:alnum:]` + for TEST_CSV in *csv; do + [ ! -f $TEST_CSV ] && continue + TEST_NAME=`basename ${TEST_CSV} .csv`"_${SUFFIX}" + OUTPUT="$TEST_NAME.plot" + cat > $OUTPUT <<- EOM +set datafile separator "," +set xdata time +set timefmt "%Y-%m-%d_%H:%M:%S" +set format x "%m-%d" +set xlabel "date" +set format y "%8.0f" +set ylabel "fps" +set yrange [0:] +set term png size 1024,768 +EOM + iter=0 + echo "set title \"$TEST_NAME\"" >> $OUTPUT + echo "set output \"${PNG_PREFIX}${TEST_NAME}.png\"" >> $OUTPUT + echo -n "plot " >> $OUTPUT + SEP="" + while [ $iter -lt $NUMBER_OF_PKT_SIZES ] ; do + COL=$((2+$iter)) + echo $"$SEP '$TEST_CSV' using 1:$COL with linespoints title columnheader($COL) \\" >> $OUTPUT + iter=$(($iter+1)) + SEP="," + done + echo -e "\t${PNG_PREFIX}${TEST_NAME}.png" + gnuplot $OUTPUT + done +} + +# +# Main body +# + +# override default set of TESTS if specified by 1st parameter +if [ "$1" != "" ] ; then + TESTS="$1" +fi + +# override default filter if specified by 2nd parameter +if [ "$2" != "" ] ; then + FILTER="$2" +fi + +# override default directory with results by 3rd parameter +if [ "$3" != "" ] ; then + DIR="$3" +fi +clean_data + +echo -e "Plot data input:" +echo -e "\tTESTS: $TESTS" +echo -e "\tFilter: $FILTER" +echo -e "\tResults direcotry: $DIR" + +prepare_data +plot_data -- cgit 1.2.3-korg