From 77348164208df28ca8545e552cc9c06eefd05256 Mon Sep 17 00:00:00 2001 From: mbeierl Date: Fri, 31 Mar 2017 03:01:17 -0400 Subject: Fixed paths to match standard Change-Id: I733d34eb8bbdf0201b06a21d0ceeda50a06dd49f Signed-off-by: mbeierl --- docs/testing/user/test-usage.rst | 244 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 244 insertions(+) create mode 100644 docs/testing/user/test-usage.rst (limited to 'docs/testing/user/test-usage.rst') diff --git a/docs/testing/user/test-usage.rst b/docs/testing/user/test-usage.rst new file mode 100644 index 0000000..2beae69 --- /dev/null +++ b/docs/testing/user/test-usage.rst @@ -0,0 +1,244 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, Dell EMC and others. + +============================= +StorPerf Test Execution Guide +============================= + +Prerequisites +============= + +This guide requires StorPerf to be running and have its ReST API accessible. If +the ReST API is not running on port 5000, adjust the commands provided here as +needed. + +Interacting With StorPerf +========================= + +Once the StorPerf container has been started and the ReST API exposed, you can +interact directly with it using the ReST API. StorPerf comes with a Swagger +interface that is accessible through the exposed port at: + +.. code-block:: console + + http://StorPerf:5000/swagger/index.html + +The typical test execution follows this pattern: + +#. Configure the environment +#. Initialize the cinder volumes +#. Execute one or more performance runs +#. Delete the environment + +Configure The Environment +========================= + +The following pieces of information are required to prepare the environment: + +- The number of VMs/Cinder volumes to create +- The Glance image that holds the VM operating system to use. StorPerf has + only been tested with Ubuntu 16.04 +- The name of the public network that agents will use +- The size, in gigabytes, of the Cinder volumes to create + +The ReST API is a POST to http://StorPerf:5000/api/v1.0/configurations and +takes a JSON payload as follows. + +.. code-block:: json + + { + "agent_count": int, + "agent_image": string, + "public_network": string, + "volume_size": int + } + +This call will block until the stack is created, at which point it will return +the OpenStack heat stack id. + +Initialize the Cinder Volumes +============================= +Before executing a test run for the purpose of measuring performance, it is +necessary to fill the Cinder volume with random data. Failure to execute this +step can result in meaningless numbers, especially for read performance. Most +Cinder drivers are smart enough to know what blocks contain data, and which do +not. Uninitialized blocks return "0" immediately without actually reading from +the volume. + +Initiating the data fill looks the same as a regular performance test, but uses +the special workload called "_warm_up". StorPerf will never push _warm_up +data to the OPNFV Test Results DB, nor will it terminate the run on steady state. +It is guaranteed to run to completion, which fills 100% of the volume with +random data. + +The ReST API is a POST to http://StorPerf:5000/api/v1.0/jobs and +takes a JSON payload as follows. + +.. code-block:: json + + { + "workload": "_warm_up" + } + +This will return a job ID as follows. + +.. code-block:: json + + { + "job_id": "edafa97e-457e-4d3d-9db4-1d6c0fc03f98" + } + +This job ID can be used to query the state to determine when it has completed. +See the section on querying jobs for more information. + +Execute a Performance Run +========================= +Performance runs can execute either a single workload, or iterate over a matrix +of workload types, block sizes and queue depths. + +Workload Types +~~~~~~~~~~~~~~ +rr + Read, Random. 100% read of random blocks +rs + Read, Sequential. 100% read of sequential blocks of data +rw + Read / Write Mix, Random. 70% random read, 30% random write +wr + Write, Random. 100% write of random blocks +ws + Write, Sequential. 100% write of sequential blocks. + +Block Sizes +~~~~~~~~~~~ +A comma delimited list of the different block sizes to use when reading and +writing data. Note: Some Cinder drivers (such as Ceph) cannot support block +sizes larger than 16k (16384). + +Queue Depths +~~~~~~~~~~~~ +A comma delimited list of the different queue depths to use when reading and +writing data. The queue depth parameter causes FIO to keep this many I/O +requests outstanding at one time. It is used to simulate traffic patterns +on the system. For example, a queue depth of 4 would simulate 4 processes +constantly creating I/O requests. + +Deadline +~~~~~~~~ +The deadline is the maximum amount of time in minutes for a workload to run. If +steady state has not been reached by the deadline, the workload will terminate +and that particular run will be marked as not having reached steady state. Any +remaining workloads will continue to execute in order. + +.. code-block:: json + + { + "block_sizes": "2048,16384, + "deadline": 20, + "queue_depths": "2,4", + "workload": "wr,rr,rw", + } + +Metadata +~~~~~~~~ +A job can have metadata associated with it for tagging. The following metadata +is required in order to push results to the OPNFV Test Results DB: + +.. code-block:: json + + "metadata": { + "disk_type": "HDD or SDD", + "pod_name": "OPNFV Pod Name", + "scenario_name": string, + "storage_node_count": int, + "version": string, + "build_tag": string, + "test_case": "snia_steady_state" + } + + + +Query Jobs Information +====================== + +By issuing a GET to the job API http://StorPerf:5000/api/v1.0/jobs?job_id=, +you can fetch information about the job as follows: + +- &type=status: to report on the status of the job. +- &type=metrics: to report on the collected metrics. +- &type=metadata: to report back any metadata sent with the job ReST API + +Status +~~~~~~ +The Status field can be: +- Running to indicate the job is still in progress, or +- Completed to indicate the job is done. This could be either normal completion + or manually terminated via HTTP DELETE call. + +Workloads can have a value of: +- Pending to indicate the workload has not yet started, +- Running to indicate this is the active workload, or +- Completed to indicate this workload has completed. + +This is an example of a type=status call. + +.. code-block:: json + + { + "Status": "Running", + "TestResultURL": null, + "Workloads": { + "eeb2e587-5274-4d2f-ad95-5c85102d055e.ws.queue-depth.1.block-size.16384": "Pending", + "eeb2e587-5274-4d2f-ad95-5c85102d055e.ws.queue-depth.1.block-size.4096": "Pending", + "eeb2e587-5274-4d2f-ad95-5c85102d055e.ws.queue-depth.1.block-size.512": "Pending", + "eeb2e587-5274-4d2f-ad95-5c85102d055e.ws.queue-depth.4.block-size.16384": "Running", + "eeb2e587-5274-4d2f-ad95-5c85102d055e.ws.queue-depth.4.block-size.4096": "Pending", + "eeb2e587-5274-4d2f-ad95-5c85102d055e.ws.queue-depth.4.block-size.512": "Pending", + "eeb2e587-5274-4d2f-ad95-5c85102d055e.ws.queue-depth.8.block-size.16384": "Completed", + "eeb2e587-5274-4d2f-ad95-5c85102d055e.ws.queue-depth.8.block-size.4096": "Pending", + "eeb2e587-5274-4d2f-ad95-5c85102d055e.ws.queue-depth.8.block-size.512": "Pending" + } + } + +Metrics +~~~~~~~ +Metrics can be queried at any time during or after the completion of a run. +Note that the metrics show up only after the first interval has passed, and +are subject to change until the job completes. + +This is a sample of a type=metrics call. + +.. code-block:: json + + { + "rw.queue-depth.1.block-size.512.read.bw": 52.8, + "rw.queue-depth.1.block-size.512.read.iops": 106.76199999999999, + "rw.queue-depth.1.block-size.512.read.lat.mean": 93.176, + "rw.queue-depth.1.block-size.512.write.bw": 22.5, + "rw.queue-depth.1.block-size.512.write.iops": 45.760000000000005, + "rw.queue-depth.1.block-size.512.write.lat.mean": 21764.184999999998 + } + +Abort a Job +=========== +Issuing an HTTP DELETE to the job api http://StorPerf:5000/api/v1.0/jobs will +force the termination of the whole job, regardless of how many workloads +remain to be executed. + +.. code-block:: bash + + curl -X DELETE --header 'Accept: application/json' http://StorPerf:5000/api/v1.0/jobs + +Delete the Environment +====================== +After you are done testing, you can have StorPerf delete the Heat stack by +issuing an HTTP DELETE to the configurations API. + +.. code-block:: bash + + curl -X DELETE --header 'Accept: application/json' http://StorPerf:5000/api/v1.0/configurations + +You may also want to delete an environment, and then create a new one with a +different number of VMs/Cinder volumes to test the impact of the number of VMs +in your environment. -- cgit 1.2.3-korg