From 812ff6ca9fcd3e629e49d4328905f33eee8ca3f5 Mon Sep 17 00:00:00 2001 From: Qiaowei Ren Date: Thu, 4 Jan 2018 13:43:33 +0800 Subject: initial code repo This patch creates initial code repo. For ceph, luminous stable release will be used for base code, and next changes and optimization for ceph will be added to it. For opensds, currently any changes can be upstreamed into original opensds repo (https://github.com/opensds/opensds), and so stor4nfv will directly clone opensds code to deploy stor4nfv environment. And the scripts for deployment based on ceph and opensds will be put into 'ci' directory. Change-Id: I46a32218884c75dda2936337604ff03c554648e4 Signed-off-by: Qiaowei Ren --- .../doc/rados/configuration/pool-pg-config-ref.rst | 270 +++++++++++++++++++++ 1 file changed, 270 insertions(+) create mode 100644 src/ceph/doc/rados/configuration/pool-pg-config-ref.rst (limited to 'src/ceph/doc/rados/configuration/pool-pg-config-ref.rst') diff --git a/src/ceph/doc/rados/configuration/pool-pg-config-ref.rst b/src/ceph/doc/rados/configuration/pool-pg-config-ref.rst new file mode 100644 index 0000000..89a3707 --- /dev/null +++ b/src/ceph/doc/rados/configuration/pool-pg-config-ref.rst @@ -0,0 +1,270 @@ +====================================== + Pool, PG and CRUSH Config Reference +====================================== + +.. index:: pools; configuration + +When you create pools and set the number of placement groups for the pool, Ceph +uses default values when you don't specifically override the defaults. **We +recommend** overridding some of the defaults. Specifically, we recommend setting +a pool's replica size and overriding the default number of placement groups. You +can specifically set these values when running `pool`_ commands. You can also +override the defaults by adding new ones in the ``[global]`` section of your +Ceph configuration file. + + +.. literalinclude:: pool-pg.conf + :language: ini + + + +``mon max pool pg num`` + +:Description: The maximum number of placement groups per pool. +:Type: Integer +:Default: ``65536`` + + +``mon pg create interval`` + +:Description: Number of seconds between PG creation in the same + Ceph OSD Daemon. + +:Type: Float +:Default: ``30.0`` + + +``mon pg stuck threshold`` + +:Description: Number of seconds after which PGs can be considered as + being stuck. + +:Type: 32-bit Integer +:Default: ``300`` + +``mon pg min inactive`` + +:Description: Issue a ``HEALTH_ERR`` in cluster log if the number of PGs stay + inactive longer than ``mon_pg_stuck_threshold`` exceeds this + setting. A non-positive number means disabled, never go into ERR. +:Type: Integer +:Default: ``1`` + + +``mon pg warn min per osd`` + +:Description: Issue a ``HEALTH_WARN`` in cluster log if the average number + of PGs per (in) OSD is under this number. (a non-positive number + disables this) +:Type: Integer +:Default: ``30`` + + +``mon pg warn max per osd`` + +:Description: Issue a ``HEALTH_WARN`` in cluster log if the average number + of PGs per (in) OSD is above this number. (a non-positive number + disables this) +:Type: Integer +:Default: ``300`` + + +``mon pg warn min objects`` + +:Description: Do not warn if the total number of objects in cluster is below + this number +:Type: Integer +:Default: ``1000`` + + +``mon pg warn min pool objects`` + +:Description: Do not warn on pools whose object number is below this number +:Type: Integer +:Default: ``1000`` + + +``mon pg check down all threshold`` + +:Description: Threshold of down OSDs percentage after which we check all PGs + for stale ones. +:Type: Float +:Default: ``0.5`` + + +``mon pg warn max object skew`` + +:Description: Issue a ``HEALTH_WARN`` in cluster log if the average object number + of a certain pool is greater than ``mon pg warn max object skew`` times + the average object number of the whole pool. (a non-positive number + disables this) +:Type: Float +:Default: ``10`` + + +``mon delta reset interval`` + +:Description: Seconds of inactivity before we reset the pg delta to 0. We keep + track of the delta of the used space of each pool, so, for + example, it would be easier for us to understand the progress of + recovery or the performance of cache tier. But if there's no + activity reported for a certain pool, we just reset the history of + deltas of that pool. +:Type: Integer +:Default: ``10`` + + +``mon osd max op age`` + +:Description: Maximum op age before we get concerned (make it a power of 2). + A ``HEALTH_WARN`` will be issued if a request has been blocked longer + than this limit. +:Type: Float +:Default: ``32.0`` + + +``osd pg bits`` + +:Description: Placement group bits per Ceph OSD Daemon. +:Type: 32-bit Integer +:Default: ``6`` + + +``osd pgp bits`` + +:Description: The number of bits per Ceph OSD Daemon for PGPs. +:Type: 32-bit Integer +:Default: ``6`` + + +``osd crush chooseleaf type`` + +:Description: The bucket type to use for ``chooseleaf`` in a CRUSH rule. Uses + ordinal rank rather than name. + +:Type: 32-bit Integer +:Default: ``1``. Typically a host containing one or more Ceph OSD Daemons. + + +``osd crush initial weight`` + +:Description: The initial crush weight for newly added osds into crushmap. + +:Type: Double +:Default: ``the size of newly added osd in TB``. By default, the initial crush + weight for the newly added osd is set to its volume size in TB. + See `Weighting Bucket Items`_ for details. + + +``osd pool default crush replicated ruleset`` + +:Description: The default CRUSH ruleset to use when creating a replicated pool. +:Type: 8-bit Integer +:Default: ``CEPH_DEFAULT_CRUSH_REPLICATED_RULESET``, which means "pick + a ruleset with the lowest numerical ID and use that". This is to + make pool creation work in the absence of ruleset 0. + + +``osd pool erasure code stripe unit`` + +:Description: Sets the default size, in bytes, of a chunk of an object + stripe for erasure coded pools. Every object of size S + will be stored as N stripes, with each data chunk + receiving ``stripe unit`` bytes. Each stripe of ``N * + stripe unit`` bytes will be encoded/decoded + individually. This option can is overridden by the + ``stripe_unit`` setting in an erasure code profile. + +:Type: Unsigned 32-bit Integer +:Default: ``4096`` + + +``osd pool default size`` + +:Description: Sets the number of replicas for objects in the pool. The default + value is the same as + ``ceph osd pool set {pool-name} size {size}``. + +:Type: 32-bit Integer +:Default: ``3`` + + +``osd pool default min size`` + +:Description: Sets the minimum number of written replicas for objects in the + pool in order to acknowledge a write operation to the client. + If minimum is not met, Ceph will not acknowledge the write to the + client. This setting ensures a minimum number of replicas when + operating in ``degraded`` mode. + +:Type: 32-bit Integer +:Default: ``0``, which means no particular minimum. If ``0``, + minimum is ``size - (size / 2)``. + + +``osd pool default pg num`` + +:Description: The default number of placement groups for a pool. The default + value is the same as ``pg_num`` with ``mkpool``. + +:Type: 32-bit Integer +:Default: ``8`` + + +``osd pool default pgp num`` + +:Description: The default number of placement groups for placement for a pool. + The default value is the same as ``pgp_num`` with ``mkpool``. + PG and PGP should be equal (for now). + +:Type: 32-bit Integer +:Default: ``8`` + + +``osd pool default flags`` + +:Description: The default flags for new pools. +:Type: 32-bit Integer +:Default: ``0`` + + +``osd max pgls`` + +:Description: The maximum number of placement groups to list. A client + requesting a large number can tie up the Ceph OSD Daemon. + +:Type: Unsigned 64-bit Integer +:Default: ``1024`` +:Note: Default should be fine. + + +``osd min pg log entries`` + +:Description: The minimum number of placement group logs to maintain + when trimming log files. + +:Type: 32-bit Int Unsigned +:Default: ``1000`` + + +``osd default data pool replay window`` + +:Description: The time (in seconds) for an OSD to wait for a client to replay + a request. + +:Type: 32-bit Integer +:Default: ``45`` + +``osd max pg per osd hard ratio`` + +:Description: The ratio of number of PGs per OSD allowed by the cluster before + OSD refuses to create new PGs. OSD stops creating new PGs if the number + of PGs it serves exceeds + ``osd max pg per osd hard ratio`` \* ``mon max pg per osd``. + +:Type: Float +:Default: ``2`` + +.. _pool: ../../operations/pools +.. _Monitoring OSDs and PGs: ../../operations/monitoring-osd-pg#peering +.. _Weighting Bucket Items: ../../operations/crush-map#weightingbucketitems -- cgit 1.2.3-korg