From 7da45d65be36d36b880cc55c5036e96c24b53f00 Mon Sep 17 00:00:00 2001 From: Qiaowei Ren Date: Thu, 1 Mar 2018 14:38:11 +0800 Subject: remove ceph code This patch removes initial ceph code, due to license issue. Change-Id: I092d44f601cdf34aed92300fe13214925563081c Signed-off-by: Qiaowei Ren --- src/ceph/doc/install/manual-deployment.rst | 488 ----------------------------- 1 file changed, 488 deletions(-) delete mode 100644 src/ceph/doc/install/manual-deployment.rst (limited to 'src/ceph/doc/install/manual-deployment.rst') diff --git a/src/ceph/doc/install/manual-deployment.rst b/src/ceph/doc/install/manual-deployment.rst deleted file mode 100644 index 0d789a6..0000000 --- a/src/ceph/doc/install/manual-deployment.rst +++ /dev/null @@ -1,488 +0,0 @@ -=================== - Manual Deployment -=================== - -All Ceph clusters require at least one monitor, and at least as many OSDs as -copies of an object stored on the cluster. Bootstrapping the initial monitor(s) -is the first step in deploying a Ceph Storage Cluster. Monitor deployment also -sets important criteria for the entire cluster, such as the number of replicas -for pools, the number of placement groups per OSD, the heartbeat intervals, -whether authentication is required, etc. Most of these values are set by -default, so it's useful to know about them when setting up your cluster for -production. - -Following the same configuration as `Installation (Quick)`_, we will set up a -cluster with ``node1`` as the monitor node, and ``node2`` and ``node3`` for -OSD nodes. - - - -.. ditaa:: - /------------------\ /----------------\ - | Admin Node | | node1 | - | +-------->+ | - | | | cCCC | - \---------+--------/ \----------------/ - | - | /----------------\ - | | node2 | - +----------------->+ | - | | cCCC | - | \----------------/ - | - | /----------------\ - | | node3 | - +----------------->| | - | cCCC | - \----------------/ - - -Monitor Bootstrapping -===================== - -Bootstrapping a monitor (a Ceph Storage Cluster, in theory) requires -a number of things: - -- **Unique Identifier:** The ``fsid`` is a unique identifier for the cluster, - and stands for File System ID from the days when the Ceph Storage Cluster was - principally for the Ceph Filesystem. Ceph now supports native interfaces, - block devices, and object storage gateway interfaces too, so ``fsid`` is a - bit of a misnomer. - -- **Cluster Name:** Ceph clusters have a cluster name, which is a simple string - without spaces. The default cluster name is ``ceph``, but you may specify - a different cluster name. Overriding the default cluster name is - especially useful when you are working with multiple clusters and you need to - clearly understand which cluster your are working with. - - For example, when you run multiple clusters in a `federated architecture`_, - the cluster name (e.g., ``us-west``, ``us-east``) identifies the cluster for - the current CLI session. **Note:** To identify the cluster name on the - command line interface, specify the Ceph configuration file with the - cluster name (e.g., ``ceph.conf``, ``us-west.conf``, ``us-east.conf``, etc.). - Also see CLI usage (``ceph --cluster {cluster-name}``). - -- **Monitor Name:** Each monitor instance within a cluster has a unique name. - In common practice, the Ceph Monitor name is the host name (we recommend one - Ceph Monitor per host, and no commingling of Ceph OSD Daemons with - Ceph Monitors). You may retrieve the short hostname with ``hostname -s``. - -- **Monitor Map:** Bootstrapping the initial monitor(s) requires you to - generate a monitor map. The monitor map requires the ``fsid``, the cluster - name (or uses the default), and at least one host name and its IP address. - -- **Monitor Keyring**: Monitors communicate with each other via a - secret key. You must generate a keyring with a monitor secret and provide - it when bootstrapping the initial monitor(s). - -- **Administrator Keyring**: To use the ``ceph`` CLI tools, you must have - a ``client.admin`` user. So you must generate the admin user and keyring, - and you must also add the ``client.admin`` user to the monitor keyring. - -The foregoing requirements do not imply the creation of a Ceph Configuration -file. However, as a best practice, we recommend creating a Ceph configuration -file and populating it with the ``fsid``, the ``mon initial members`` and the -``mon host`` settings. - -You can get and set all of the monitor settings at runtime as well. However, -a Ceph Configuration file may contain only those settings that override the -default values. When you add settings to a Ceph configuration file, these -settings override the default settings. Maintaining those settings in a -Ceph configuration file makes it easier to maintain your cluster. - -The procedure is as follows: - - -#. Log in to the initial monitor node(s):: - - ssh {hostname} - - For example:: - - ssh node1 - - -#. Ensure you have a directory for the Ceph configuration file. By default, - Ceph uses ``/etc/ceph``. When you install ``ceph``, the installer will - create the ``/etc/ceph`` directory automatically. :: - - ls /etc/ceph - - **Note:** Deployment tools may remove this directory when purging a - cluster (e.g., ``ceph-deploy purgedata {node-name}``, ``ceph-deploy purge - {node-name}``). - -#. Create a Ceph configuration file. By default, Ceph uses - ``ceph.conf``, where ``ceph`` reflects the cluster name. :: - - sudo vim /etc/ceph/ceph.conf - - -#. Generate a unique ID (i.e., ``fsid``) for your cluster. :: - - uuidgen - - -#. Add the unique ID to your Ceph configuration file. :: - - fsid = {UUID} - - For example:: - - fsid = a7f64266-0894-4f1e-a635-d0aeaca0e993 - - -#. Add the initial monitor(s) to your Ceph configuration file. :: - - mon initial members = {hostname}[,{hostname}] - - For example:: - - mon initial members = node1 - - -#. Add the IP address(es) of the initial monitor(s) to your Ceph configuration - file and save the file. :: - - mon host = {ip-address}[,{ip-address}] - - For example:: - - mon host = 192.168.0.1 - - **Note:** You may use IPv6 addresses instead of IPv4 addresses, but - you must set ``ms bind ipv6`` to ``true``. See `Network Configuration - Reference`_ for details about network configuration. - -#. Create a keyring for your cluster and generate a monitor secret key. :: - - ceph-authtool --create-keyring /tmp/ceph.mon.keyring --gen-key -n mon. --cap mon 'allow *' - - -#. Generate an administrator keyring, generate a ``client.admin`` user and add - the user to the keyring. :: - - sudo ceph-authtool --create-keyring /etc/ceph/ceph.client.admin.keyring --gen-key -n client.admin --set-uid=0 --cap mon 'allow *' --cap osd 'allow *' --cap mds 'allow *' --cap mgr 'allow *' - - -#. Add the ``client.admin`` key to the ``ceph.mon.keyring``. :: - - ceph-authtool /tmp/ceph.mon.keyring --import-keyring /etc/ceph/ceph.client.admin.keyring - - -#. Generate a monitor map using the hostname(s), host IP address(es) and the FSID. - Save it as ``/tmp/monmap``:: - - monmaptool --create --add {hostname} {ip-address} --fsid {uuid} /tmp/monmap - - For example:: - - monmaptool --create --add node1 192.168.0.1 --fsid a7f64266-0894-4f1e-a635-d0aeaca0e993 /tmp/monmap - - -#. Create a default data directory (or directories) on the monitor host(s). :: - - sudo mkdir /var/lib/ceph/mon/{cluster-name}-{hostname} - - For example:: - - sudo mkdir /var/lib/ceph/mon/ceph-node1 - - See `Monitor Config Reference - Data`_ for details. - -#. Populate the monitor daemon(s) with the monitor map and keyring. :: - - sudo -u ceph ceph-mon [--cluster {cluster-name}] --mkfs -i {hostname} --monmap /tmp/monmap --keyring /tmp/ceph.mon.keyring - - For example:: - - sudo -u ceph ceph-mon --mkfs -i node1 --monmap /tmp/monmap --keyring /tmp/ceph.mon.keyring - - -#. Consider settings for a Ceph configuration file. Common settings include - the following:: - - [global] - fsid = {cluster-id} - mon initial members = {hostname}[, {hostname}] - mon host = {ip-address}[, {ip-address}] - public network = {network}[, {network}] - cluster network = {network}[, {network}] - auth cluster required = cephx - auth service required = cephx - auth client required = cephx - osd journal size = {n} - osd pool default size = {n} # Write an object n times. - osd pool default min size = {n} # Allow writing n copy in a degraded state. - osd pool default pg num = {n} - osd pool default pgp num = {n} - osd crush chooseleaf type = {n} - - In the foregoing example, the ``[global]`` section of the configuration might - look like this:: - - [global] - fsid = a7f64266-0894-4f1e-a635-d0aeaca0e993 - mon initial members = node1 - mon host = 192.168.0.1 - public network = 192.168.0.0/24 - auth cluster required = cephx - auth service required = cephx - auth client required = cephx - osd journal size = 1024 - osd pool default size = 2 - osd pool default min size = 1 - osd pool default pg num = 333 - osd pool default pgp num = 333 - osd crush chooseleaf type = 1 - -#. Touch the ``done`` file. - - Mark that the monitor is created and ready to be started:: - - sudo touch /var/lib/ceph/mon/ceph-node1/done - -#. Start the monitor(s). - - For Ubuntu, use Upstart:: - - sudo start ceph-mon id=node1 [cluster={cluster-name}] - - In this case, to allow the start of the daemon at each reboot you - must create two empty files like this:: - - sudo touch /var/lib/ceph/mon/{cluster-name}-{hostname}/upstart - - For example:: - - sudo touch /var/lib/ceph/mon/ceph-node1/upstart - - For Debian/CentOS/RHEL, use sysvinit:: - - sudo /etc/init.d/ceph start mon.node1 - - -#. Verify that Ceph created the default pools. :: - - ceph osd lspools - - You should see output like this:: - - 0 data,1 metadata,2 rbd, - - -#. Verify that the monitor is running. :: - - ceph -s - - You should see output that the monitor you started is up and running, and - you should see a health error indicating that placement groups are stuck - inactive. It should look something like this:: - - cluster a7f64266-0894-4f1e-a635-d0aeaca0e993 - health HEALTH_ERR 192 pgs stuck inactive; 192 pgs stuck unclean; no osds - monmap e1: 1 mons at {node1=192.168.0.1:6789/0}, election epoch 1, quorum 0 node1 - osdmap e1: 0 osds: 0 up, 0 in - pgmap v2: 192 pgs, 3 pools, 0 bytes data, 0 objects - 0 kB used, 0 kB / 0 kB avail - 192 creating - - **Note:** Once you add OSDs and start them, the placement group health errors - should disappear. See the next section for details. - -Manager daemon configuration -============================ - -On each node where you run a ceph-mon daemon, you should also set up a ceph-mgr daemon. - -See :ref:`mgr-administrator-guide` - -Adding OSDs -=========== - -Once you have your initial monitor(s) running, you should add OSDs. Your cluster -cannot reach an ``active + clean`` state until you have enough OSDs to handle the -number of copies of an object (e.g., ``osd pool default size = 2`` requires at -least two OSDs). After bootstrapping your monitor, your cluster has a default -CRUSH map; however, the CRUSH map doesn't have any Ceph OSD Daemons mapped to -a Ceph Node. - - -Short Form ----------- - -Ceph provides the ``ceph-disk`` utility, which can prepare a disk, partition or -directory for use with Ceph. The ``ceph-disk`` utility creates the OSD ID by -incrementing the index. Additionally, ``ceph-disk`` will add the new OSD to the -CRUSH map under the host for you. Execute ``ceph-disk -h`` for CLI details. -The ``ceph-disk`` utility automates the steps of the `Long Form`_ below. To -create the first two OSDs with the short form procedure, execute the following -on ``node2`` and ``node3``: - - -#. Prepare the OSD. :: - - ssh {node-name} - sudo ceph-disk prepare --cluster {cluster-name} --cluster-uuid {uuid} {data-path} [{journal-path}] - - For example:: - - ssh node1 - sudo ceph-disk prepare --cluster ceph --cluster-uuid a7f64266-0894-4f1e-a635-d0aeaca0e993 --fs-type ext4 /dev/hdd1 - - -#. Activate the OSD:: - - sudo ceph-disk activate {data-path} [--activate-key {path}] - - For example:: - - sudo ceph-disk activate /dev/hdd1 - - **Note:** Use the ``--activate-key`` argument if you do not have a copy - of ``/var/lib/ceph/bootstrap-osd/{cluster}.keyring`` on the Ceph Node. - - -Long Form ---------- - -Without the benefit of any helper utilities, create an OSD and add it to the -cluster and CRUSH map with the following procedure. To create the first two -OSDs with the long form procedure, execute the following steps for each OSD. - -.. note:: This procedure does not describe deployment on top of dm-crypt - making use of the dm-crypt 'lockbox'. - -#. Connect to the OSD host and become root. :: - - ssh {node-name} - sudo bash - -#. Generate a UUID for the OSD. :: - - UUID=$(uuidgen) - -#. Generate a cephx key for the OSD. :: - - OSD_SECRET=$(ceph-authtool --gen-print-key) - -#. Create the OSD. Note that an OSD ID can be provided as an - additional argument to ``ceph osd new`` if you need to reuse a - previously-destroyed OSD id. We assume that the - ``client.bootstrap-osd`` key is present on the machine. You may - alternatively execute this command as ``client.admin`` on a - different host where that key is present.:: - - ID=$(echo "{\"cephx_secret\": \"$OSD_SECRET\"}" | \ - ceph osd new $UUID -i - \ - -n client.bootstrap-osd -k /var/lib/ceph/bootstrap-osd/ceph.keyring) - -#. Create the default directory on your new OSD. :: - - mkdir /var/lib/ceph/osd/ceph-$ID - -#. If the OSD is for a drive other than the OS drive, prepare it - for use with Ceph, and mount it to the directory you just created. :: - - mkfs.xfs /dev/{DEV} - mount /dev/{DEV} /var/lib/ceph/osd/ceph-$ID - -#. Write the secret to the OSD keyring file. :: - - ceph-authtool --create-keyring /var/lib/ceph/osd/ceph-$ID/keyring \ - --name osd.$ID --add-key $OSD_SECRET - -#. Initialize the OSD data directory. :: - - ceph-osd -i $ID --mkfs --osd-uuid $UUID - -#. Fix ownership. :: - - chown -R ceph:ceph /var/lib/ceph/osd/ceph-$ID - -#. After you add an OSD to Ceph, the OSD is in your configuration. However, - it is not yet running. You must start - your new OSD before it can begin receiving data. - - For modern systemd distributions:: - - systemctl enable ceph-osd@$ID - systemctl start ceph-osd@$ID - - For example:: - - systemctl enable ceph-osd@12 - systemctl start ceph-osd@12 - - -Adding MDS -========== - -In the below instructions, ``{id}`` is an arbitrary name, such as the hostname of the machine. - -#. Create the mds data directory.:: - - mkdir -p /var/lib/ceph/mds/{cluster-name}-{id} - -#. Create a keyring.:: - - ceph-authtool --create-keyring /var/lib/ceph/mds/{cluster-name}-{id}/keyring --gen-key -n mds.{id} - -#. Import the keyring and set caps.:: - - ceph auth add mds.{id} osd "allow rwx" mds "allow" mon "allow profile mds" -i /var/lib/ceph/mds/{cluster}-{id}/keyring - -#. Add to ceph.conf.:: - - [mds.{id}] - host = {id} - -#. Start the daemon the manual way.:: - - ceph-mds --cluster {cluster-name} -i {id} -m {mon-hostname}:{mon-port} [-f] - -#. Start the daemon the right way (using ceph.conf entry).:: - - service ceph start - -#. If starting the daemon fails with this error:: - - mds.-1.0 ERROR: failed to authenticate: (22) Invalid argument - - Then make sure you do not have a keyring set in ceph.conf in the global section; move it to the client section; or add a keyring setting specific to this mds daemon. And verify that you see the same key in the mds data directory and ``ceph auth get mds.{id}`` output. - -#. Now you are ready to `create a Ceph filesystem`_. - - -Summary -======= - -Once you have your monitor and two OSDs up and running, you can watch the -placement groups peer by executing the following:: - - ceph -w - -To view the tree, execute the following:: - - ceph osd tree - -You should see output that looks something like this:: - - # id weight type name up/down reweight - -1 2 root default - -2 2 host node1 - 0 1 osd.0 up 1 - -3 1 host node2 - 1 1 osd.1 up 1 - -To add (or remove) additional monitors, see `Add/Remove Monitors`_. -To add (or remove) additional Ceph OSD Daemons, see `Add/Remove OSDs`_. - - -.. _federated architecture: ../../radosgw/federated-config -.. _Installation (Quick): ../../start -.. _Add/Remove Monitors: ../../rados/operations/add-or-rm-mons -.. _Add/Remove OSDs: ../../rados/operations/add-or-rm-osds -.. _Network Configuration Reference: ../../rados/configuration/network-config-ref -.. _Monitor Config Reference - Data: ../../rados/configuration/mon-config-ref#data -.. _create a Ceph filesystem: ../../cephfs/createfs -- cgit 1.2.3-korg