From b9f16e2669ff5a0cde006951ffec5dff84ac29df Mon Sep 17 00:00:00 2001 From: leonwang Date: Fri, 23 Feb 2018 15:01:06 +0000 Subject: Update opensds ansible This patch is designed for solving some problems below: - Sync the latest code with opensds community - Enable containerized deployment in ansible script - Fix some bugs in port conflicts of etcd deployment Change-Id: Id48906b91c08b3a98e6fc3d8d424a1cd2b11f2be Signed-off-by: leonwang --- ci/ansible/README.md | 356 +++---- ci/ansible/clean.yml | 26 +- ci/ansible/group_vars/ceph/all.yml | 1002 ++++++++++---------- ci/ansible/group_vars/ceph/ceph.hosts | 16 +- ci/ansible/group_vars/ceph/ceph.yaml | 8 +- ci/ansible/group_vars/ceph/osds.yml | 518 +++++----- ci/ansible/group_vars/cinder/cinder.yaml | 28 +- ci/ansible/group_vars/common.yml | 69 +- ci/ansible/group_vars/lvm/lvm.yaml | 8 +- ci/ansible/group_vars/osdsdb.yml | 64 +- ci/ansible/group_vars/osdsdock.yml | 159 ++-- ci/ansible/group_vars/osdslet.yml | 45 +- ci/ansible/local.hosts | 10 +- ci/ansible/roles/cleaner/tasks/main.yml | 314 +++--- ci/ansible/roles/common/tasks/main.yml | 256 +++-- ci/ansible/roles/osdsdb/scenarios/container.yml | 10 + ci/ansible/roles/osdsdb/scenarios/etcd.yml | 77 +- ci/ansible/roles/osdsdb/tasks/main.yml | 12 +- ci/ansible/roles/osdsdock/scenarios/ceph.yml | 141 +-- ci/ansible/roles/osdsdock/scenarios/cinder.yml | 6 +- .../roles/osdsdock/scenarios/cinder_standalone.yml | 287 +++--- ci/ansible/roles/osdsdock/scenarios/lvm.yml | 49 +- ci/ansible/roles/osdsdock/tasks/main.yml | 75 +- ci/ansible/roles/osdslet/tasks/main.yml | 41 +- ci/ansible/site.yml | 36 +- 25 files changed, 1832 insertions(+), 1781 deletions(-) mode change 100644 => 100755 ci/ansible/README.md mode change 100644 => 100755 ci/ansible/clean.yml mode change 100644 => 100755 ci/ansible/group_vars/ceph/all.yml mode change 100644 => 100755 ci/ansible/group_vars/ceph/ceph.hosts mode change 100644 => 100755 ci/ansible/group_vars/ceph/ceph.yaml mode change 100644 => 100755 ci/ansible/group_vars/ceph/osds.yml mode change 100644 => 100755 ci/ansible/group_vars/common.yml mode change 100644 => 100755 ci/ansible/group_vars/lvm/lvm.yaml mode change 100644 => 100755 ci/ansible/group_vars/osdsdb.yml mode change 100644 => 100755 ci/ansible/group_vars/osdsdock.yml mode change 100644 => 100755 ci/ansible/group_vars/osdslet.yml mode change 100644 => 100755 ci/ansible/local.hosts mode change 100644 => 100755 ci/ansible/roles/cleaner/tasks/main.yml mode change 100644 => 100755 ci/ansible/roles/common/tasks/main.yml create mode 100644 ci/ansible/roles/osdsdb/scenarios/container.yml mode change 100644 => 100755 ci/ansible/roles/osdsdb/scenarios/etcd.yml mode change 100644 => 100755 ci/ansible/roles/osdsdb/tasks/main.yml mode change 100644 => 100755 ci/ansible/roles/osdsdock/scenarios/ceph.yml mode change 100644 => 100755 ci/ansible/roles/osdsdock/scenarios/cinder.yml mode change 100644 => 100755 ci/ansible/roles/osdsdock/scenarios/lvm.yml mode change 100644 => 100755 ci/ansible/roles/osdsdock/tasks/main.yml mode change 100644 => 100755 ci/ansible/roles/osdslet/tasks/main.yml mode change 100644 => 100755 ci/ansible/site.yml diff --git a/ci/ansible/README.md b/ci/ansible/README.md old mode 100644 new mode 100755 index 2bf2a80..1bda3b3 --- a/ci/ansible/README.md +++ b/ci/ansible/README.md @@ -1,178 +1,178 @@ -# opensds-ansible -This is an installation tool for opensds using ansible. - -## 1. How to install an opensds local cluster -This installation document assumes there is a clean Ubuntu 16.04 environment. If golang is already installed in the environment, make sure the following parameters are configured in ```/etc/profile``` and run ``source /etc/profile``: -```conf -export GOROOT=/usr/local/go -export GOPATH=$HOME/gopath -export PATH=$PATH:$GOROOT/bin:$GOPATH/bin -``` - -### Pre-config (Ubuntu 16.04) -First download some system packages: -``` -sudo apt-get install -y openssh-server git make gcc -``` -Then config ```/etc/ssh/sshd_config``` file and change one line: -```conf -PermitRootLogin yes -``` -Next generate ssh-token: -```bash -ssh-keygen -t rsa -ssh-copy-id -i ~/.ssh/id_rsa.pub # IP address of the target machine of the installation -``` - -### Install docker -If use a standalone cinder as backend, you also need to install docker to run cinder service. Please see the [docker installation document](https://docs.docker.com/engine/installation/linux/docker-ce/ubuntu/) for details. - -### Install ansible tool -```bash -sudo add-apt-repository ppa:ansible/ansible # This step is needed to upgrade ansible to version 2.4.2 which is required for the ceph backend. -sudo apt-get update -sudo apt-get install ansible -ansible --version # Ansible version 2.4.2 or higher is required for ceph; 2.0.0.2 or higher is needed for other backends. -``` - -### Download opensds source code -```bash -mkdir -p $HOME/gopath/src/github.com/opensds && cd $HOME/gopath/src/github.com/opensds -git clone https://github.com/opensds/opensds.git -b -cd opensds/contrib/ansible -``` - -### Configure opensds cluster variables: -##### System environment: -Configure the ```workplace``` in `group_vars/common.yml`: -```yaml -workplace: /home/your_username # Change this field according to your username. If login as root, configure this parameter to '/root' -``` - -##### LVM -If `lvm` is chosen as storage backend, modify `group_vars/osdsdock.yml`: -```yaml -enabled_backend: lvm # Change it according to the chosen backend. Supported backends include 'lvm', 'ceph', and 'cinder' -pv_device: "your_pv_device_path" # Specify a block device and ensure it exists if lvm is chosen -vg_name: "specified_vg_name" # Specify a name for VG if choosing lvm -``` -Modify ```group_vars/lvm/lvm.yaml```, change pool name to be the same as `vg_name` above: -```yaml -"vg001" # change pool name to be the same as vg_name -``` -##### Ceph -If `ceph` is chosen as storage backend, modify `group_vars/osdsdock.yml`: -```yaml -enabled_backend: ceph # Change it according to the chosen backend. Supported backends include 'lvm', 'ceph', and 'cinder'. -ceph_pool_name: "specified_pool_name" # Specify a name for ceph pool if choosing ceph -``` -Modify ```group_vars/ceph/ceph.yaml```, change pool name to be the same as `ceph_pool_name`: -```yaml -"rbd" # change pool name to be the same as ceph pool -``` -Configure two files under ```group_vars/ceph```: `all.yml` and `osds.yml`. Here is an example: - -```group_vars/ceph/all.yml```: -```yml -ceph_origin: repository -ceph_repository: community -ceph_stable_release: luminous # Choose luminous as default version -public_network: "192.168.3.0/24" # Run 'ip -4 address' to check the ip address -cluster_network: "{{ public_network }}" -monitor_interface: eth1 # Change to the network interface on the target machine -``` -```group_vars/ceph/osds.yml```: -```yml -devices: # For ceph devices, append one or multiple devices like the example below: - - '/dev/sda' # Ensure this device exists and available if ceph is chosen - - '/dev/sdb' # Ensure this device exists and available if ceph is chosen -osd_scenario: collocated -``` - -##### Cinder -If `cinder` is chosen as storage backend, modify `group_vars/osdsdock.yml`: -```yaml -enabled_backend: cinder # Change it according to the chosen backend. Supported backends include 'lvm', 'ceph', and 'cinder' - -# Use block-box install cinder_standalone if true, see details in: -use_cinder_standalone: true -# If true, you can configure cinder_container_platform, cinder_image_tag, -# cinder_volume_group. - -# Default: debian:stretch, and ubuntu:xenial, centos:7 is also supported. -cinder_container_platform: debian:stretch -# The image tag can be arbitrarily modified, as long as follow the image naming -# conventions, default: debian-cinder -cinder_image_tag: debian-cinder -# The cinder standalone use lvm driver as default driver, therefore `volume_group` -# should be configured, the default is: cinder-volumes. The volume group will be -# removed when use ansible script clean environment. -cinder_volume_group: cinder-volumes -``` - -Configure the auth and pool options to access cinder in `group_vars/cinder/cinder.yaml`. Do not need to make additional configure changes if using cinder standalone. - -### Check if the hosts can be reached -```bash -sudo ansible all -m ping -i local.hosts -``` - -### Run opensds-ansible playbook to start deploy -```bash -sudo ansible-playbook site.yml -i local.hosts -``` - -## 2. How to test opensds cluster - -### Configure opensds CLI tool -```bash -sudo cp $GOPATH/src/github.com/opensds/opensds/build/out/bin/osdsctl /usr/local/bin -export OPENSDS_ENDPOINT=http://127.0.0.1:50040 -osdsctl pool list # Check if the pool resource is available -``` - -### Create a default profile first. -``` -osdsctl profile create '{"name": "default", "description": "default policy"}' -``` - -### Create a volume. -``` -osdsctl volume create 1 --name=test-001 -``` -For cinder, az needs to be specified. -``` -osdsctl volume create 1 --name=test-001 --az nova -``` - -### List all volumes. -``` -osdsctl volume list -``` - -### Delete the volume. -``` -osdsctl volume delete -``` - - -## 3. How to purge and clean opensds cluster - -### Run opensds-ansible playbook to clean the environment -```bash -sudo ansible-playbook clean.yml -i local.hosts -``` - -### Run ceph-ansible playbook to clean ceph cluster if ceph is deployed -```bash -cd /opt/ceph-ansible -sudo ansible-playbook infrastructure-playbooks/purge-cluster.yml -i ceph.hosts -``` - -In addition, clean up the logical partition on the physical block device used by ceph, using the ```fdisk``` tool. - -### Remove ceph-ansible source code (optional) -```bash -cd .. -sudo rm -rf /opt/ceph-ansible -``` +# opensds-ansible +This is an installation tool for opensds using ansible. + +## 1. How to install an opensds local cluster +This installation document assumes there is a clean Ubuntu 16.04 environment. If golang is already installed in the environment, make sure the following parameters are configured in ```/etc/profile``` and run ``source /etc/profile``: +```conf +export GOROOT=/usr/local/go +export GOPATH=$HOME/gopath +export PATH=$PATH:$GOROOT/bin:$GOPATH/bin +``` + +### Pre-config (Ubuntu 16.04) +First download some system packages: +``` +sudo apt-get install -y openssh-server git make gcc +``` +Then config ```/etc/ssh/sshd_config``` file and change one line: +```conf +PermitRootLogin yes +``` +Next generate ssh-token: +```bash +ssh-keygen -t rsa +ssh-copy-id -i ~/.ssh/id_rsa.pub # IP address of the target machine of the installation +``` + +### Install docker +If use a standalone cinder as backend, you also need to install docker to run cinder service. Please see the [docker installation document](https://docs.docker.com/engine/installation/linux/docker-ce/ubuntu/) for details. + +### Install ansible tool +```bash +sudo add-apt-repository ppa:ansible/ansible # This step is needed to upgrade ansible to version 2.4.2 which is required for the ceph backend. +sudo apt-get update +sudo apt-get install ansible +ansible --version # Ansible version 2.4.2 or higher is required for ceph; 2.0.0.2 or higher is needed for other backends. +``` + +### Download opensds source code +```bash +mkdir -p $HOME/gopath/src/github.com/opensds && cd $HOME/gopath/src/github.com/opensds +git clone https://github.com/opensds/opensds.git -b +cd opensds/contrib/ansible +``` + +### Configure opensds cluster variables: +##### System environment: +Configure the ```workplace``` in `group_vars/common.yml`: +```yaml +workplace: /home/your_username # Change this field according to your username. If login as root, configure this parameter to '/root' +``` + +##### LVM +If `lvm` is chosen as storage backend, modify `group_vars/osdsdock.yml`: +```yaml +enabled_backend: lvm # Change it according to the chosen backend. Supported backends include 'lvm', 'ceph', and 'cinder' +pv_device: "your_pv_device_path" # Specify a block device and ensure it exists if lvm is chosen +vg_name: "specified_vg_name" # Specify a name for VG if choosing lvm +``` +Modify ```group_vars/lvm/lvm.yaml```, change pool name to be the same as `vg_name` above: +```yaml +"vg001" # change pool name to be the same as vg_name +``` +##### Ceph +If `ceph` is chosen as storage backend, modify `group_vars/osdsdock.yml`: +```yaml +enabled_backend: ceph # Change it according to the chosen backend. Supported backends include 'lvm', 'ceph', and 'cinder'. +ceph_pool_name: "specified_pool_name" # Specify a name for ceph pool if choosing ceph +``` +Modify ```group_vars/ceph/ceph.yaml```, change pool name to be the same as `ceph_pool_name`: +```yaml +"rbd" # change pool name to be the same as ceph pool +``` +Configure two files under ```group_vars/ceph```: `all.yml` and `osds.yml`. Here is an example: + +```group_vars/ceph/all.yml```: +```yml +ceph_origin: repository +ceph_repository: community +ceph_stable_release: luminous # Choose luminous as default version +public_network: "192.168.3.0/24" # Run 'ip -4 address' to check the ip address +cluster_network: "{{ public_network }}" +monitor_interface: eth1 # Change to the network interface on the target machine +``` +```group_vars/ceph/osds.yml```: +```yml +devices: # For ceph devices, append one or multiple devices like the example below: + - '/dev/sda' # Ensure this device exists and available if ceph is chosen + - '/dev/sdb' # Ensure this device exists and available if ceph is chosen +osd_scenario: collocated +``` + +##### Cinder +If `cinder` is chosen as storage backend, modify `group_vars/osdsdock.yml`: +```yaml +enabled_backend: cinder # Change it according to the chosen backend. Supported backends include 'lvm', 'ceph', and 'cinder' + +# Use block-box install cinder_standalone if true, see details in: +use_cinder_standalone: true +# If true, you can configure cinder_container_platform, cinder_image_tag, +# cinder_volume_group. + +# Default: debian:stretch, and ubuntu:xenial, centos:7 is also supported. +cinder_container_platform: debian:stretch +# The image tag can be arbitrarily modified, as long as follow the image naming +# conventions, default: debian-cinder +cinder_image_tag: debian-cinder +# The cinder standalone use lvm driver as default driver, therefore `volume_group` +# should be configured, the default is: cinder-volumes. The volume group will be +# removed when use ansible script clean environment. +cinder_volume_group: cinder-volumes +``` + +Configure the auth and pool options to access cinder in `group_vars/cinder/cinder.yaml`. Do not need to make additional configure changes if using cinder standalone. + +### Check if the hosts can be reached +```bash +sudo ansible all -m ping -i local.hosts +``` + +### Run opensds-ansible playbook to start deploy +```bash +sudo ansible-playbook site.yml -i local.hosts +``` + +## 2. How to test opensds cluster + +### Configure opensds CLI tool +```bash +sudo cp $GOPATH/src/github.com/opensds/opensds/build/out/bin/osdsctl /usr/local/bin +export OPENSDS_ENDPOINT=http://127.0.0.1:50040 +osdsctl pool list # Check if the pool resource is available +``` + +### Create a default profile first. +``` +osdsctl profile create '{"name": "default", "description": "default policy"}' +``` + +### Create a volume. +``` +osdsctl volume create 1 --name=test-001 +``` +For cinder, az needs to be specified. +``` +osdsctl volume create 1 --name=test-001 --az nova +``` + +### List all volumes. +``` +osdsctl volume list +``` + +### Delete the volume. +``` +osdsctl volume delete +``` + + +## 3. How to purge and clean opensds cluster + +### Run opensds-ansible playbook to clean the environment +```bash +sudo ansible-playbook clean.yml -i local.hosts +``` + +### Run ceph-ansible playbook to clean ceph cluster if ceph is deployed +```bash +cd /opt/ceph-ansible +sudo ansible-playbook infrastructure-playbooks/purge-cluster.yml -i ceph.hosts +``` + +In addition, clean up the logical partition on the physical block device used by ceph, using the ```fdisk``` tool. + +### Remove ceph-ansible source code (optional) +```bash +cd .. +sudo rm -rf /opt/ceph-ansible +``` diff --git a/ci/ansible/clean.yml b/ci/ansible/clean.yml old mode 100644 new mode 100755 index fd2f1c9..505c85b --- a/ci/ansible/clean.yml +++ b/ci/ansible/clean.yml @@ -1,14 +1,14 @@ ---- -# Defines some clean processes when banishing the cluster. - -- name: destory an opensds cluster - hosts: all - remote_user: root - vars_files: - - group_vars/common.yml - - group_vars/osdsdb.yml - - group_vars/osdsdock.yml - gather_facts: false - become: True - roles: +--- +# Defines some clean processes when banishing the cluster. + +- name: destory an opensds cluster + hosts: all + remote_user: root + vars_files: + - group_vars/common.yml + - group_vars/osdsdb.yml + - group_vars/osdsdock.yml + gather_facts: false + become: True + roles: - cleaner \ No newline at end of file diff --git a/ci/ansible/group_vars/ceph/all.yml b/ci/ansible/group_vars/ceph/all.yml old mode 100644 new mode 100755 index 9594d33..1d49e6c --- a/ci/ansible/group_vars/ceph/all.yml +++ b/ci/ansible/group_vars/ceph/all.yml @@ -1,501 +1,501 @@ ---- -# Variables here are applicable to all host groups NOT roles - -# This sample file generated by generate_group_vars_sample.sh - -# Dummy variable to avoid error because ansible does not recognize the -# file as a good configuration file when no variable in it. -dummy: - -# You can override vars by using host or group vars - -########### -# GENERAL # -########### - -###################################### -# Releases name to number dictionary # -###################################### -#ceph_release_num: -# dumpling: 0.67 -# emperor: 0.72 -# firefly: 0.80 -# giant: 0.87 -# hammer: 0.94 -# infernalis: 9 -# jewel: 10 -# kraken: 11 -# luminous: 12 -# mimic: 13 - -# Directory to fetch cluster fsid, keys etc... -#fetch_directory: fetch/ - -# The 'cluster' variable determines the name of the cluster. -# Changing the default value to something else means that you will -# need to change all the command line calls as well, for example if -# your cluster name is 'foo': -# "ceph health" will become "ceph --cluster foo health" -# -# An easier way to handle this is to use the environment variable CEPH_ARGS -# So run: "export CEPH_ARGS="--cluster foo" -# With that you will be able to run "ceph health" normally -#cluster: ceph - -# Inventory host group variables -#mon_group_name: mons -#osd_group_name: osds -#rgw_group_name: rgws -#mds_group_name: mdss -#nfs_group_name: nfss -#restapi_group_name: restapis -#rbdmirror_group_name: rbdmirrors -#client_group_name: clients -#iscsi_gw_group_name: iscsi-gws -#mgr_group_name: mgrs - -# If check_firewall is true, then ansible will try to determine if the -# Ceph ports are blocked by a firewall. If the machine running ansible -# cannot reach the Ceph ports for some other reason, you may need or -# want to set this to False to skip those checks. -#check_firewall: False - - -############ -# PACKAGES # -############ -#debian_package_dependencies: -# - python-pycurl -# - hdparm - -#centos_package_dependencies: -# - python-pycurl -# - hdparm -# - epel-release -# - python-setuptools -# - libselinux-python - -#redhat_package_dependencies: -# - python-pycurl -# - hdparm -# - python-setuptools - -# Whether or not to install the ceph-test package. -#ceph_test: false - -# Enable the ntp service by default to avoid clock skew on -# ceph nodes -#ntp_service_enabled: true - -# Set uid/gid to default '64045' for bootstrap directories. -# '64045' is used for debian based distros. It must be set to 167 in case of rhel based distros. -# These values have to be set according to the base OS used by the container image, NOT the host. -#bootstrap_dirs_owner: "64045" -#bootstrap_dirs_group: "64045" - -# This variable determines if ceph packages can be updated. If False, the -# package resources will use "state=present". If True, they will use -# "state=latest". -#upgrade_ceph_packages: False - -#ceph_use_distro_backports: false # DEBIAN ONLY - - -########### -# INSTALL # -########### -#ceph_rhcs_cdn_install: False # backward compatibility with stable-2.2, will disappear in stable 3.1 -#ceph_repository_type: "{{ 'cdn' if ceph_rhcs_cdn_install else 'iso' if ceph_rhcs_iso_install else 'dummy' }}" # backward compatibility with stable-2.2, will disappear in stable 3.1 -#ceph_rhcs_iso_install: False # backward compatibility with stable-2.2, will disappear in stable 3.1 -#ceph_rhcs: False # backward compatibility with stable-2.2, will disappear in stable 3.1 -#ceph_stable: False # backward compatibility with stable-2.2, will disappear in stable 3.1 -#ceph_dev: False # backward compatibility with stable-2.2, will disappear in stable 3.1 -#ceph_stable_uca: False # backward compatibility with stable-2.2, will disappear in stable 3.1 -#ceph_custom: False # backward compatibility with stable-2.2, will disappear in stable 3.1 - -# ORIGIN SOURCE -# -# Choose between: -# - 'repository' means that you will get ceph installed through a new repository. Later below choose between 'community', 'rhcs' or 'dev' -# - 'distro' means that no separate repo file will be added -# you will get whatever version of Ceph is included in your Linux distro. -# 'local' means that the ceph binaries will be copied over from the local machine -#ceph_origin: "{{ 'repository' if ceph_rhcs or ceph_stable or ceph_dev or ceph_stable_uca or ceph_custom else 'dummy' }}" # backward compatibility with stable-2.2, will disappear in stable 3.1 -#valid_ceph_origins: -# - repository -# - distro -# - local -ceph_origin: repository -ceph_repository: community - -#ceph_repository: "{{ 'community' if ceph_stable else 'rhcs' if ceph_rhcs else 'dev' if ceph_dev else 'uca' if ceph_stable_uca else 'custom' if ceph_custom else 'dummy' }}" # backward compatibility with stable-2.2, will disappear in stable 3.1 -#valid_ceph_repository: -# - community -# - rhcs -# - dev -# - uca -# - custom - - -# REPOSITORY: COMMUNITY VERSION -# -# Enabled when ceph_repository == 'community' -# -#ceph_mirror: http://download.ceph.com -#ceph_stable_key: https://download.ceph.com/keys/release.asc -ceph_stable_release: luminous -#ceph_stable_repo: "{{ ceph_mirror }}/debian-{{ ceph_stable_release }}" - -#nfs_ganesha_stable: true # use stable repos for nfs-ganesha -#nfs_ganesha_stable_branch: V2.5-stable -#nfs_ganesha_stable_deb_repo: "{{ ceph_mirror }}/nfs-ganesha/deb-{{ nfs_ganesha_stable_branch }}/{{ ceph_stable_release }}" - - -# Use the option below to specify your applicable package tree, eg. when using non-LTS Ubuntu versions -# # for a list of available Debian distributions, visit http://download.ceph.com/debian-{{ ceph_stable_release }}/dists/ -# for more info read: https://github.com/ceph/ceph-ansible/issues/305 -#ceph_stable_distro_source: "{{ ansible_lsb.codename }}" - -# This option is needed for _both_ stable and dev version, so please always fill the right version -# # for supported distros, see http://download.ceph.com/rpm-{{ ceph_stable_release }}/ -#ceph_stable_redhat_distro: el7 - - -# REPOSITORY: RHCS VERSION RED HAT STORAGE (from 1.3) -# -# Enabled when ceph_repository == 'rhcs' -# -# This version is only supported on RHEL >= 7.1 -# As of RHEL 7.1, libceph.ko and rbd.ko are now included in Red Hat's kernel -# packages natively. The RHEL 7.1 kernel packages are more stable and secure than -# using these 3rd-party kmods with RHEL 7.0. Please update your systems to RHEL -# 7.1 or later if you want to use the kernel RBD client. -# -# The CephFS kernel client is undergoing rapid development upstream, and we do -# not recommend running the CephFS kernel module on RHEL 7's 3.10 kernel at this -# time. Please use ELRepo's latest upstream 4.x kernels if you want to run CephFS -# on RHEL 7. -# -# -#ceph_rhcs_version: "{{ ceph_stable_rh_storage_version | default(2) }}" -#valid_ceph_repository_type: -# - cdn -# - iso -#ceph_rhcs_iso_path: "{{ ceph_stable_rh_storage_iso_path | default('') }}" -#ceph_rhcs_mount_path: "{{ ceph_stable_rh_storage_mount_path | default('/tmp/rh-storage-mount') }}" -#ceph_rhcs_repository_path: "{{ ceph_stable_rh_storage_repository_path | default('/tmp/rh-storage-repo') }}" # where to copy iso's content - -# RHCS installation in Debian systems -#ceph_rhcs_cdn_debian_repo: https://customername:customerpasswd@rhcs.download.redhat.com -#ceph_rhcs_cdn_debian_repo_version: "/3-release/" # for GA, later for updates use /3-updates/ - - -# REPOSITORY: UBUNTU CLOUD ARCHIVE -# -# Enabled when ceph_repository == 'uca' -# -# This allows the install of Ceph from the Ubuntu Cloud Archive. The Ubuntu Cloud Archive -# usually has newer Ceph releases than the normal distro repository. -# -# -#ceph_stable_repo_uca: "http://ubuntu-cloud.archive.canonical.com/ubuntu" -#ceph_stable_openstack_release_uca: liberty -#ceph_stable_release_uca: "{{ansible_lsb.codename}}-updates/{{ceph_stable_openstack_release_uca}}" - - -# REPOSITORY: DEV -# -# Enabled when ceph_repository == 'dev' -# -#ceph_dev_branch: master # development branch you would like to use e.g: master, wip-hack -#ceph_dev_sha1: latest # distinct sha1 to use, defaults to 'latest' (as in latest built) - -#nfs_ganesha_dev: false # use development repos for nfs-ganesha - -# Set this to choose the version of ceph dev libraries used in the nfs-ganesha packages from shaman -# flavors so far include: ceph_master, ceph_jewel, ceph_kraken, ceph_luminous -#nfs_ganesha_flavor: "ceph_master" - -#ceph_iscsi_config_dev: true # special repo for deploying iSCSI gateways - - -# REPOSITORY: CUSTOM -# -# Enabled when ceph_repository == 'custom' -# -# Use a custom repository to install ceph. For RPM, ceph_custom_repo should be -# a URL to the .repo file to be installed on the targets. For deb, -# ceph_custom_repo should be the URL to the repo base. -# -#ceph_custom_repo: https://server.domain.com/ceph-custom-repo - - -# ORIGIN: LOCAL CEPH INSTALLATION -# -# Enabled when ceph_repository == 'local' -# -# Path to DESTDIR of the ceph install -#ceph_installation_dir: "/path/to/ceph_installation/" -# Whether or not to use installer script rundep_installer.sh -# This script takes in rundep and installs the packages line by line onto the machine -# If this is set to false then it is assumed that the machine ceph is being copied onto will already have -# all runtime dependencies installed -#use_installer: false -# Root directory for ceph-ansible -#ansible_dir: "/path/to/ceph-ansible" - - -###################### -# CEPH CONFIGURATION # -###################### - -## Ceph options -# -# Each cluster requires a unique, consistent filesystem ID. By -# default, the playbook generates one for you and stores it in a file -# in `fetch_directory`. If you want to customize how the fsid is -# generated, you may find it useful to disable fsid generation to -# avoid cluttering up your ansible repo. If you set `generate_fsid` to -# false, you *must* generate `fsid` in another way. -# ACTIVATE THE FSID VARIABLE FOR NON-VAGRANT DEPLOYMENT -#fsid: "{{ cluster_uuid.stdout }}" -#generate_fsid: true - -#ceph_conf_key_directory: /etc/ceph - -#cephx: true - -## Client options -# -#rbd_cache: "true" -#rbd_cache_writethrough_until_flush: "true" -#rbd_concurrent_management_ops: 20 - -#rbd_client_directories: true # this will create rbd_client_log_path and rbd_client_admin_socket_path directories with proper permissions - -# Permissions for the rbd_client_log_path and -# rbd_client_admin_socket_path. Depending on your use case for Ceph -# you may want to change these values. The default, which is used if -# any of the variables are unset or set to a false value (like `null` -# or `false`) is to automatically determine what is appropriate for -# the Ceph version with non-OpenStack workloads -- ceph:ceph and 0770 -# for infernalis releases, and root:root and 1777 for pre-infernalis -# releases. -# -# For other use cases, including running Ceph with OpenStack, you'll -# want to set these differently: -# -# For OpenStack on RHEL, you'll want: -# rbd_client_directory_owner: "qemu" -# rbd_client_directory_group: "libvirtd" (or "libvirt", depending on your version of libvirt) -# rbd_client_directory_mode: "0755" -# -# For OpenStack on Ubuntu or Debian, set: -# rbd_client_directory_owner: "libvirt-qemu" -# rbd_client_directory_group: "kvm" -# rbd_client_directory_mode: "0755" -# -# If you set rbd_client_directory_mode, you must use a string (e.g., -# 'rbd_client_directory_mode: "0755"', *not* -# 'rbd_client_directory_mode: 0755', or Ansible will complain: mode -# must be in octal or symbolic form -#rbd_client_directory_owner: null -#rbd_client_directory_group: null -#rbd_client_directory_mode: null - -#rbd_client_log_path: /var/log/ceph -#rbd_client_log_file: "{{ rbd_client_log_path }}/qemu-guest-$pid.log" # must be writable by QEMU and allowed by SELinux or AppArmor -#rbd_client_admin_socket_path: /var/run/ceph # must be writable by QEMU and allowed by SELinux or AppArmor - -## Monitor options -# -# You must define either monitor_interface, monitor_address or monitor_address_block. -# These variables must be defined at least in all.yml and overrided if needed (inventory host file or group_vars/*.yml). -# Eg. If you want to specify for each monitor which address the monitor will bind to you can set it in your **inventory host file** by using 'monitor_address' variable. -# Preference will go to monitor_address if both monitor_address and monitor_interface are defined. -# To use an IPv6 address, use the monitor_address setting instead (and set ip_version to ipv6) -monitor_interface: ens3 -#monitor_address: 0.0.0.0 -#monitor_address_block: subnet -# set to either ipv4 or ipv6, whichever your network is using -#ip_version: ipv4 -#mon_use_fqdn: false # if set to true, the MON name used will be the fqdn in the ceph.conf - -## OSD options -# -journal_size: 100 # OSD journal size in MB -public_network: 100.64.128.40/24 -cluster_network: "{{ public_network }}" -#osd_mkfs_type: xfs -#osd_mkfs_options_xfs: -f -i size=2048 -#osd_mount_options_xfs: noatime,largeio,inode64,swalloc -#osd_objectstore: filestore - -# xattrs. by default, 'filestore xattr use omap' is set to 'true' if -# 'osd_mkfs_type' is set to 'ext4'; otherwise it isn't set. This can -# be set to 'true' or 'false' to explicitly override those -# defaults. Leave it 'null' to use the default for your chosen mkfs -# type. -#filestore_xattr_use_omap: null - -## MDS options -# -#mds_use_fqdn: false # if set to true, the MDS name used will be the fqdn in the ceph.conf -#mds_allow_multimds: false -#mds_max_mds: 3 - -## Rados Gateway options -# -#radosgw_dns_name: your.subdomain.tld # subdomains used by radosgw. See http://ceph.com/docs/master/radosgw/config/#enabling-subdomain-s3-calls -#radosgw_resolve_cname: false # enable for radosgw to resolve DNS CNAME based bucket names -#radosgw_civetweb_port: 8080 -#radosgw_civetweb_num_threads: 100 -# For additional civetweb configuration options available such as SSL, logging, -# keepalive, and timeout settings, please see the civetweb docs at -# https://github.com/civetweb/civetweb/blob/master/docs/UserManual.md -#radosgw_civetweb_options: "num_threads={{ radosgw_civetweb_num_threads }}" -# You must define either radosgw_interface, radosgw_address. -# These variables must be defined at least in all.yml and overrided if needed (inventory host file or group_vars/*.yml). -# Eg. If you want to specify for each radosgw node which address the radosgw will bind to you can set it in your **inventory host file** by using 'radosgw_address' variable. -# Preference will go to radosgw_address if both radosgw_address and radosgw_interface are defined. -# To use an IPv6 address, use the radosgw_address setting instead (and set ip_version to ipv6) -#radosgw_interface: interface -#radosgw_address: "{{ '0.0.0.0' if rgw_containerized_deployment else 'address' }}" # backward compatibility with stable-2.2, will disappear in stable 3.1 -#radosgw_address_block: subnet -#radosgw_keystone: false # activate OpenStack Keystone options full detail here: http://ceph.com/docs/master/radosgw/keystone/ -# Rados Gateway options -#email_address: foo@bar.com - -## REST API options -# -#restapi_interface: "{{ monitor_interface }}" -#restapi_address: "{{ monitor_address }}" -#restapi_port: 5000 - -## Testing mode -# enable this mode _only_ when you have a single node -# if you don't want it keep the option commented -#common_single_host_mode: true - -## Handlers - restarting daemons after a config change -# if for whatever reasons the content of your ceph configuration changes -# ceph daemons will be restarted as well. At the moment, we can not detect -# which config option changed so all the daemons will be restarted. Although -# this restart will be serialized for each node, in between a health check -# will be performed so we make sure we don't move to the next node until -# ceph is not healthy -# Obviously between the checks (for monitors to be in quorum and for osd's pgs -# to be clean) we have to wait. These retries and delays can be configurable -# for both monitors and osds. -# -# Monitor handler checks -#handler_health_mon_check_retries: 5 -#handler_health_mon_check_delay: 10 -# -# OSD handler checks -#handler_health_osd_check_retries: 40 -#handler_health_osd_check_delay: 30 -#handler_health_osd_check: true -# -# MDS handler checks -#handler_health_mds_check_retries: 5 -#handler_health_mds_check_delay: 10 -# -# RGW handler checks -#handler_health_rgw_check_retries: 5 -#handler_health_rgw_check_delay: 10 - -# NFS handler checks -#handler_health_nfs_check_retries: 5 -#handler_health_nfs_check_delay: 10 - -# RBD MIRROR handler checks -#handler_health_rbd_mirror_check_retries: 5 -#handler_health_rbd_mirror_check_delay: 10 - -# MGR handler checks -#handler_health_mgr_check_retries: 5 -#handler_health_mgr_check_delay: 10 - -############### -# NFS-GANESHA # -############### - -# Confiure the type of NFS gatway access. At least one must be enabled for an -# NFS role to be useful -# -# Set this to true to enable File access via NFS. Requires an MDS role. -#nfs_file_gw: false -# Set this to true to enable Object access via NFS. Requires an RGW role. -#nfs_obj_gw: true - -################### -# CONFIG OVERRIDE # -################### - -# Ceph configuration file override. -# This allows you to specify more configuration options -# using an INI style format. -# The following sections are supported: [global], [mon], [osd], [mds], [rgw] -# -# Example: -# ceph_conf_overrides: -# global: -# foo: 1234 -# bar: 5678 -# -#ceph_conf_overrides: {} - - -############# -# OS TUNING # -############# - -#disable_transparent_hugepage: true -#os_tuning_params: -# - { name: kernel.pid_max, value: 4194303 } -# - { name: fs.file-max, value: 26234859 } -# - { name: vm.zone_reclaim_mode, value: 0 } -# - { name: vm.swappiness, value: 10 } -# - { name: vm.min_free_kbytes, value: "{{ vm_min_free_kbytes }}" } - -# For Debian & Red Hat/CentOS installs set TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES -# Set this to a byte value (e.g. 134217728) -# A value of 0 will leave the package default. -#ceph_tcmalloc_max_total_thread_cache: 0 - - -########## -# DOCKER # -########## -#docker_exec_cmd: -#docker: false -#ceph_docker_image: "ceph/daemon" -#ceph_docker_image_tag: latest -#ceph_docker_registry: docker.io -#ceph_docker_enable_centos_extra_repo: false -#ceph_docker_on_openstack: false -#ceph_mon_docker_interface: "{{ monitor_interface }}" # backward compatibility with stable-2.2, will disappear in stable 3.1 -#ceph_mon_docker_subnet: "{{ public_network }}" # backward compatibility with stable-2.2, will disappear in stable 3.1 -#mon_containerized_deployment: False # backward compatibility with stable-2.2, will disappear in stable 3.1 -#osd_containerized_deployment: False # backward compatibility with stable-2.2, will disappear in stable 3.1 -#mds_containerized_deployment: False # backward compatibility with stable-2.2, will disappear in stable 3.1 -#rgw_containerized_deployment: False # backward compatibility with stable-2.2, will disappear in stable 3.1 -#containerized_deployment: "{{ True if mon_containerized_deployment or osd_containerized_deployment or mds_containerized_deployment or rgw_containerized_deployment else False }}" # backward compatibility with stable-2.2, will disappear in stable 3.1 - - -############ -# KV store # -############ -#containerized_deployment_with_kv: false -#mon_containerized_default_ceph_conf_with_kv: false -#kv_type: etcd -#kv_endpoint: 127.0.0.1 -#kv_port: 2379 - - -# this is only here for usage with the rolling_update.yml playbook -# do not ever change this here -#rolling_update: false - - +--- +# Variables here are applicable to all host groups NOT roles + +# This sample file generated by generate_group_vars_sample.sh + +# Dummy variable to avoid error because ansible does not recognize the +# file as a good configuration file when no variable in it. +dummy: + +# You can override vars by using host or group vars + +########### +# GENERAL # +########### + +###################################### +# Releases name to number dictionary # +###################################### +#ceph_release_num: +# dumpling: 0.67 +# emperor: 0.72 +# firefly: 0.80 +# giant: 0.87 +# hammer: 0.94 +# infernalis: 9 +# jewel: 10 +# kraken: 11 +# luminous: 12 +# mimic: 13 + +# Directory to fetch cluster fsid, keys etc... +#fetch_directory: fetch/ + +# The 'cluster' variable determines the name of the cluster. +# Changing the default value to something else means that you will +# need to change all the command line calls as well, for example if +# your cluster name is 'foo': +# "ceph health" will become "ceph --cluster foo health" +# +# An easier way to handle this is to use the environment variable CEPH_ARGS +# So run: "export CEPH_ARGS="--cluster foo" +# With that you will be able to run "ceph health" normally +#cluster: ceph + +# Inventory host group variables +#mon_group_name: mons +#osd_group_name: osds +#rgw_group_name: rgws +#mds_group_name: mdss +#nfs_group_name: nfss +#restapi_group_name: restapis +#rbdmirror_group_name: rbdmirrors +#client_group_name: clients +#iscsi_gw_group_name: iscsi-gws +#mgr_group_name: mgrs + +# If check_firewall is true, then ansible will try to determine if the +# Ceph ports are blocked by a firewall. If the machine running ansible +# cannot reach the Ceph ports for some other reason, you may need or +# want to set this to False to skip those checks. +#check_firewall: False + + +############ +# PACKAGES # +############ +#debian_package_dependencies: +# - python-pycurl +# - hdparm + +#centos_package_dependencies: +# - python-pycurl +# - hdparm +# - epel-release +# - python-setuptools +# - libselinux-python + +#redhat_package_dependencies: +# - python-pycurl +# - hdparm +# - python-setuptools + +# Whether or not to install the ceph-test package. +#ceph_test: false + +# Enable the ntp service by default to avoid clock skew on +# ceph nodes +#ntp_service_enabled: true + +# Set uid/gid to default '64045' for bootstrap directories. +# '64045' is used for debian based distros. It must be set to 167 in case of rhel based distros. +# These values have to be set according to the base OS used by the container image, NOT the host. +#bootstrap_dirs_owner: "64045" +#bootstrap_dirs_group: "64045" + +# This variable determines if ceph packages can be updated. If False, the +# package resources will use "state=present". If True, they will use +# "state=latest". +#upgrade_ceph_packages: False + +#ceph_use_distro_backports: false # DEBIAN ONLY + + +########### +# INSTALL # +########### +#ceph_rhcs_cdn_install: False # backward compatibility with stable-2.2, will disappear in stable 3.1 +#ceph_repository_type: "{{ 'cdn' if ceph_rhcs_cdn_install else 'iso' if ceph_rhcs_iso_install else 'dummy' }}" # backward compatibility with stable-2.2, will disappear in stable 3.1 +#ceph_rhcs_iso_install: False # backward compatibility with stable-2.2, will disappear in stable 3.1 +#ceph_rhcs: False # backward compatibility with stable-2.2, will disappear in stable 3.1 +#ceph_stable: False # backward compatibility with stable-2.2, will disappear in stable 3.1 +#ceph_dev: False # backward compatibility with stable-2.2, will disappear in stable 3.1 +#ceph_stable_uca: False # backward compatibility with stable-2.2, will disappear in stable 3.1 +#ceph_custom: False # backward compatibility with stable-2.2, will disappear in stable 3.1 + +# ORIGIN SOURCE +# +# Choose between: +# - 'repository' means that you will get ceph installed through a new repository. Later below choose between 'community', 'rhcs' or 'dev' +# - 'distro' means that no separate repo file will be added +# you will get whatever version of Ceph is included in your Linux distro. +# 'local' means that the ceph binaries will be copied over from the local machine +#ceph_origin: "{{ 'repository' if ceph_rhcs or ceph_stable or ceph_dev or ceph_stable_uca or ceph_custom else 'dummy' }}" # backward compatibility with stable-2.2, will disappear in stable 3.1 +#valid_ceph_origins: +# - repository +# - distro +# - local +ceph_origin: repository +ceph_repository: community + +#ceph_repository: "{{ 'community' if ceph_stable else 'rhcs' if ceph_rhcs else 'dev' if ceph_dev else 'uca' if ceph_stable_uca else 'custom' if ceph_custom else 'dummy' }}" # backward compatibility with stable-2.2, will disappear in stable 3.1 +#valid_ceph_repository: +# - community +# - rhcs +# - dev +# - uca +# - custom + + +# REPOSITORY: COMMUNITY VERSION +# +# Enabled when ceph_repository == 'community' +# +#ceph_mirror: http://download.ceph.com +#ceph_stable_key: https://download.ceph.com/keys/release.asc +ceph_stable_release: luminous +#ceph_stable_repo: "{{ ceph_mirror }}/debian-{{ ceph_stable_release }}" + +#nfs_ganesha_stable: true # use stable repos for nfs-ganesha +#nfs_ganesha_stable_branch: V2.5-stable +#nfs_ganesha_stable_deb_repo: "{{ ceph_mirror }}/nfs-ganesha/deb-{{ nfs_ganesha_stable_branch }}/{{ ceph_stable_release }}" + + +# Use the option below to specify your applicable package tree, eg. when using non-LTS Ubuntu versions +# # for a list of available Debian distributions, visit http://download.ceph.com/debian-{{ ceph_stable_release }}/dists/ +# for more info read: https://github.com/ceph/ceph-ansible/issues/305 +#ceph_stable_distro_source: "{{ ansible_lsb.codename }}" + +# This option is needed for _both_ stable and dev version, so please always fill the right version +# # for supported distros, see http://download.ceph.com/rpm-{{ ceph_stable_release }}/ +#ceph_stable_redhat_distro: el7 + + +# REPOSITORY: RHCS VERSION RED HAT STORAGE (from 1.3) +# +# Enabled when ceph_repository == 'rhcs' +# +# This version is only supported on RHEL >= 7.1 +# As of RHEL 7.1, libceph.ko and rbd.ko are now included in Red Hat's kernel +# packages natively. The RHEL 7.1 kernel packages are more stable and secure than +# using these 3rd-party kmods with RHEL 7.0. Please update your systems to RHEL +# 7.1 or later if you want to use the kernel RBD client. +# +# The CephFS kernel client is undergoing rapid development upstream, and we do +# not recommend running the CephFS kernel module on RHEL 7's 3.10 kernel at this +# time. Please use ELRepo's latest upstream 4.x kernels if you want to run CephFS +# on RHEL 7. +# +# +#ceph_rhcs_version: "{{ ceph_stable_rh_storage_version | default(2) }}" +#valid_ceph_repository_type: +# - cdn +# - iso +#ceph_rhcs_iso_path: "{{ ceph_stable_rh_storage_iso_path | default('') }}" +#ceph_rhcs_mount_path: "{{ ceph_stable_rh_storage_mount_path | default('/tmp/rh-storage-mount') }}" +#ceph_rhcs_repository_path: "{{ ceph_stable_rh_storage_repository_path | default('/tmp/rh-storage-repo') }}" # where to copy iso's content + +# RHCS installation in Debian systems +#ceph_rhcs_cdn_debian_repo: https://customername:customerpasswd@rhcs.download.redhat.com +#ceph_rhcs_cdn_debian_repo_version: "/3-release/" # for GA, later for updates use /3-updates/ + + +# REPOSITORY: UBUNTU CLOUD ARCHIVE +# +# Enabled when ceph_repository == 'uca' +# +# This allows the install of Ceph from the Ubuntu Cloud Archive. The Ubuntu Cloud Archive +# usually has newer Ceph releases than the normal distro repository. +# +# +#ceph_stable_repo_uca: "http://ubuntu-cloud.archive.canonical.com/ubuntu" +#ceph_stable_openstack_release_uca: liberty +#ceph_stable_release_uca: "{{ansible_lsb.codename}}-updates/{{ceph_stable_openstack_release_uca}}" + + +# REPOSITORY: DEV +# +# Enabled when ceph_repository == 'dev' +# +#ceph_dev_branch: master # development branch you would like to use e.g: master, wip-hack +#ceph_dev_sha1: latest # distinct sha1 to use, defaults to 'latest' (as in latest built) + +#nfs_ganesha_dev: false # use development repos for nfs-ganesha + +# Set this to choose the version of ceph dev libraries used in the nfs-ganesha packages from shaman +# flavors so far include: ceph_master, ceph_jewel, ceph_kraken, ceph_luminous +#nfs_ganesha_flavor: "ceph_master" + +#ceph_iscsi_config_dev: true # special repo for deploying iSCSI gateways + + +# REPOSITORY: CUSTOM +# +# Enabled when ceph_repository == 'custom' +# +# Use a custom repository to install ceph. For RPM, ceph_custom_repo should be +# a URL to the .repo file to be installed on the targets. For deb, +# ceph_custom_repo should be the URL to the repo base. +# +#ceph_custom_repo: https://server.domain.com/ceph-custom-repo + + +# ORIGIN: LOCAL CEPH INSTALLATION +# +# Enabled when ceph_repository == 'local' +# +# Path to DESTDIR of the ceph install +#ceph_installation_dir: "/path/to/ceph_installation/" +# Whether or not to use installer script rundep_installer.sh +# This script takes in rundep and installs the packages line by line onto the machine +# If this is set to false then it is assumed that the machine ceph is being copied onto will already have +# all runtime dependencies installed +#use_installer: false +# Root directory for ceph-ansible +#ansible_dir: "/path/to/ceph-ansible" + + +###################### +# CEPH CONFIGURATION # +###################### + +## Ceph options +# +# Each cluster requires a unique, consistent filesystem ID. By +# default, the playbook generates one for you and stores it in a file +# in `fetch_directory`. If you want to customize how the fsid is +# generated, you may find it useful to disable fsid generation to +# avoid cluttering up your ansible repo. If you set `generate_fsid` to +# false, you *must* generate `fsid` in another way. +# ACTIVATE THE FSID VARIABLE FOR NON-VAGRANT DEPLOYMENT +#fsid: "{{ cluster_uuid.stdout }}" +#generate_fsid: true + +#ceph_conf_key_directory: /etc/ceph + +#cephx: true + +## Client options +# +#rbd_cache: "true" +#rbd_cache_writethrough_until_flush: "true" +#rbd_concurrent_management_ops: 20 + +#rbd_client_directories: true # this will create rbd_client_log_path and rbd_client_admin_socket_path directories with proper permissions + +# Permissions for the rbd_client_log_path and +# rbd_client_admin_socket_path. Depending on your use case for Ceph +# you may want to change these values. The default, which is used if +# any of the variables are unset or set to a false value (like `null` +# or `false`) is to automatically determine what is appropriate for +# the Ceph version with non-OpenStack workloads -- ceph:ceph and 0770 +# for infernalis releases, and root:root and 1777 for pre-infernalis +# releases. +# +# For other use cases, including running Ceph with OpenStack, you'll +# want to set these differently: +# +# For OpenStack on RHEL, you'll want: +# rbd_client_directory_owner: "qemu" +# rbd_client_directory_group: "libvirtd" (or "libvirt", depending on your version of libvirt) +# rbd_client_directory_mode: "0755" +# +# For OpenStack on Ubuntu or Debian, set: +# rbd_client_directory_owner: "libvirt-qemu" +# rbd_client_directory_group: "kvm" +# rbd_client_directory_mode: "0755" +# +# If you set rbd_client_directory_mode, you must use a string (e.g., +# 'rbd_client_directory_mode: "0755"', *not* +# 'rbd_client_directory_mode: 0755', or Ansible will complain: mode +# must be in octal or symbolic form +#rbd_client_directory_owner: null +#rbd_client_directory_group: null +#rbd_client_directory_mode: null + +#rbd_client_log_path: /var/log/ceph +#rbd_client_log_file: "{{ rbd_client_log_path }}/qemu-guest-$pid.log" # must be writable by QEMU and allowed by SELinux or AppArmor +#rbd_client_admin_socket_path: /var/run/ceph # must be writable by QEMU and allowed by SELinux or AppArmor + +## Monitor options +# +# You must define either monitor_interface, monitor_address or monitor_address_block. +# These variables must be defined at least in all.yml and overrided if needed (inventory host file or group_vars/*.yml). +# Eg. If you want to specify for each monitor which address the monitor will bind to you can set it in your **inventory host file** by using 'monitor_address' variable. +# Preference will go to monitor_address if both monitor_address and monitor_interface are defined. +# To use an IPv6 address, use the monitor_address setting instead (and set ip_version to ipv6) +monitor_interface: ens3 +#monitor_address: 0.0.0.0 +#monitor_address_block: subnet +# set to either ipv4 or ipv6, whichever your network is using +#ip_version: ipv4 +#mon_use_fqdn: false # if set to true, the MON name used will be the fqdn in the ceph.conf + +## OSD options +# +journal_size: 100 # OSD journal size in MB +public_network: 100.64.128.40/24 +cluster_network: "{{ public_network }}" +#osd_mkfs_type: xfs +#osd_mkfs_options_xfs: -f -i size=2048 +#osd_mount_options_xfs: noatime,largeio,inode64,swalloc +#osd_objectstore: filestore + +# xattrs. by default, 'filestore xattr use omap' is set to 'true' if +# 'osd_mkfs_type' is set to 'ext4'; otherwise it isn't set. This can +# be set to 'true' or 'false' to explicitly override those +# defaults. Leave it 'null' to use the default for your chosen mkfs +# type. +#filestore_xattr_use_omap: null + +## MDS options +# +#mds_use_fqdn: false # if set to true, the MDS name used will be the fqdn in the ceph.conf +#mds_allow_multimds: false +#mds_max_mds: 3 + +## Rados Gateway options +# +#radosgw_dns_name: your.subdomain.tld # subdomains used by radosgw. See http://ceph.com/docs/master/radosgw/config/#enabling-subdomain-s3-calls +#radosgw_resolve_cname: false # enable for radosgw to resolve DNS CNAME based bucket names +#radosgw_civetweb_port: 8080 +#radosgw_civetweb_num_threads: 100 +# For additional civetweb configuration options available such as SSL, logging, +# keepalive, and timeout settings, please see the civetweb docs at +# https://github.com/civetweb/civetweb/blob/master/docs/UserManual.md +#radosgw_civetweb_options: "num_threads={{ radosgw_civetweb_num_threads }}" +# You must define either radosgw_interface, radosgw_address. +# These variables must be defined at least in all.yml and overrided if needed (inventory host file or group_vars/*.yml). +# Eg. If you want to specify for each radosgw node which address the radosgw will bind to you can set it in your **inventory host file** by using 'radosgw_address' variable. +# Preference will go to radosgw_address if both radosgw_address and radosgw_interface are defined. +# To use an IPv6 address, use the radosgw_address setting instead (and set ip_version to ipv6) +#radosgw_interface: interface +#radosgw_address: "{{ '0.0.0.0' if rgw_containerized_deployment else 'address' }}" # backward compatibility with stable-2.2, will disappear in stable 3.1 +#radosgw_address_block: subnet +#radosgw_keystone: false # activate OpenStack Keystone options full detail here: http://ceph.com/docs/master/radosgw/keystone/ +# Rados Gateway options +#email_address: foo@bar.com + +## REST API options +# +#restapi_interface: "{{ monitor_interface }}" +#restapi_address: "{{ monitor_address }}" +#restapi_port: 5000 + +## Testing mode +# enable this mode _only_ when you have a single node +# if you don't want it keep the option commented +#common_single_host_mode: true + +## Handlers - restarting daemons after a config change +# if for whatever reasons the content of your ceph configuration changes +# ceph daemons will be restarted as well. At the moment, we can not detect +# which config option changed so all the daemons will be restarted. Although +# this restart will be serialized for each node, in between a health check +# will be performed so we make sure we don't move to the next node until +# ceph is not healthy +# Obviously between the checks (for monitors to be in quorum and for osd's pgs +# to be clean) we have to wait. These retries and delays can be configurable +# for both monitors and osds. +# +# Monitor handler checks +#handler_health_mon_check_retries: 5 +#handler_health_mon_check_delay: 10 +# +# OSD handler checks +#handler_health_osd_check_retries: 40 +#handler_health_osd_check_delay: 30 +#handler_health_osd_check: true +# +# MDS handler checks +#handler_health_mds_check_retries: 5 +#handler_health_mds_check_delay: 10 +# +# RGW handler checks +#handler_health_rgw_check_retries: 5 +#handler_health_rgw_check_delay: 10 + +# NFS handler checks +#handler_health_nfs_check_retries: 5 +#handler_health_nfs_check_delay: 10 + +# RBD MIRROR handler checks +#handler_health_rbd_mirror_check_retries: 5 +#handler_health_rbd_mirror_check_delay: 10 + +# MGR handler checks +#handler_health_mgr_check_retries: 5 +#handler_health_mgr_check_delay: 10 + +############### +# NFS-GANESHA # +############### + +# Confiure the type of NFS gatway access. At least one must be enabled for an +# NFS role to be useful +# +# Set this to true to enable File access via NFS. Requires an MDS role. +#nfs_file_gw: false +# Set this to true to enable Object access via NFS. Requires an RGW role. +#nfs_obj_gw: true + +################### +# CONFIG OVERRIDE # +################### + +# Ceph configuration file override. +# This allows you to specify more configuration options +# using an INI style format. +# The following sections are supported: [global], [mon], [osd], [mds], [rgw] +# +# Example: +# ceph_conf_overrides: +# global: +# foo: 1234 +# bar: 5678 +# +#ceph_conf_overrides: {} + + +############# +# OS TUNING # +############# + +#disable_transparent_hugepage: true +#os_tuning_params: +# - { name: kernel.pid_max, value: 4194303 } +# - { name: fs.file-max, value: 26234859 } +# - { name: vm.zone_reclaim_mode, value: 0 } +# - { name: vm.swappiness, value: 10 } +# - { name: vm.min_free_kbytes, value: "{{ vm_min_free_kbytes }}" } + +# For Debian & Red Hat/CentOS installs set TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES +# Set this to a byte value (e.g. 134217728) +# A value of 0 will leave the package default. +#ceph_tcmalloc_max_total_thread_cache: 0 + + +########## +# DOCKER # +########## +#docker_exec_cmd: +#docker: false +#ceph_docker_image: "ceph/daemon" +#ceph_docker_image_tag: latest +#ceph_docker_registry: docker.io +#ceph_docker_enable_centos_extra_repo: false +#ceph_docker_on_openstack: false +#ceph_mon_docker_interface: "{{ monitor_interface }}" # backward compatibility with stable-2.2, will disappear in stable 3.1 +#ceph_mon_docker_subnet: "{{ public_network }}" # backward compatibility with stable-2.2, will disappear in stable 3.1 +#mon_containerized_deployment: False # backward compatibility with stable-2.2, will disappear in stable 3.1 +#osd_containerized_deployment: False # backward compatibility with stable-2.2, will disappear in stable 3.1 +#mds_containerized_deployment: False # backward compatibility with stable-2.2, will disappear in stable 3.1 +#rgw_containerized_deployment: False # backward compatibility with stable-2.2, will disappear in stable 3.1 +#containerized_deployment: "{{ True if mon_containerized_deployment or osd_containerized_deployment or mds_containerized_deployment or rgw_containerized_deployment else False }}" # backward compatibility with stable-2.2, will disappear in stable 3.1 + + +############ +# KV store # +############ +#containerized_deployment_with_kv: false +#mon_containerized_default_ceph_conf_with_kv: false +#kv_type: etcd +#kv_endpoint: 127.0.0.1 +#kv_port: 2379 + + +# this is only here for usage with the rolling_update.yml playbook +# do not ever change this here +#rolling_update: false + + diff --git a/ci/ansible/group_vars/ceph/ceph.hosts b/ci/ansible/group_vars/ceph/ceph.hosts old mode 100644 new mode 100755 index 34a7b26..42f5da8 --- a/ci/ansible/group_vars/ceph/ceph.hosts +++ b/ci/ansible/group_vars/ceph/ceph.hosts @@ -1,8 +1,8 @@ -[mons] -localhost ansible_connection=local - -[osds] -localhost ansible_connection=local - -[mgrs] -localhost ansible_connection=local +[mons] +localhost ansible_connection=local + +[osds] +localhost ansible_connection=local + +[mgrs] +localhost ansible_connection=local diff --git a/ci/ansible/group_vars/ceph/ceph.yaml b/ci/ansible/group_vars/ceph/ceph.yaml old mode 100644 new mode 100755 index 8f2f918..8272cd1 --- a/ci/ansible/group_vars/ceph/ceph.yaml +++ b/ci/ansible/group_vars/ceph/ceph.yaml @@ -1,5 +1,5 @@ -configFile: /etc/ceph/ceph.conf -pool: - "rbd": # change pool name same to ceph pool, but don't change it if you choose lvm backend - diskType: SSD +configFile: /etc/ceph/ceph.conf +pool: + "rbd": # change pool name same to ceph pool, but don't change it if you choose lvm backend + diskType: SSD AZ: default \ No newline at end of file diff --git a/ci/ansible/group_vars/ceph/osds.yml b/ci/ansible/group_vars/ceph/osds.yml old mode 100644 new mode 100755 index 57cf581..1f12204 --- a/ci/ansible/group_vars/ceph/osds.yml +++ b/ci/ansible/group_vars/ceph/osds.yml @@ -1,259 +1,259 @@ ---- -# Variables here are applicable to all host groups NOT roles - -# This sample file generated by generate_group_vars_sample.sh - -# Dummy variable to avoid error because ansible does not recognize the -# file as a good configuration file when no variable in it. -dummy: - -# You can override default vars defined in defaults/main.yml here, -# but I would advice to use host or group vars instead - -#raw_journal_devices: "{{ dedicated_devices }}" # backward compatibility with stable-2.2, will disappear in stable 3.1 -#journal_collocation: False # backward compatibility with stable-2.2, will disappear in stable 3.1 -#raw_multi_journal: False # backward compatibility with stable-2.2, will disappear in stable 3.1 -#dmcrytpt_journal_collocation: False # backward compatibility with stable-2.2, will disappear in stable 3.1 -#dmcrypt_dedicated_journal: False # backward compatibility with stable-2.2, will disappear in stable 3.1 - - -########### -# GENERAL # -########### - -# Even though OSD nodes should not have the admin key -# at their disposal, some people might want to have it -# distributed on OSD nodes. Setting 'copy_admin_key' to 'true' -# will copy the admin key to the /etc/ceph/ directory -#copy_admin_key: false - - -#################### -# OSD CRUSH LOCATION -#################### - -# /!\ -# -# BE EXTREMELY CAREFUL WITH THIS OPTION -# DO NOT USE IT UNLESS YOU KNOW WHAT YOU ARE DOING -# -# /!\ -# -# It is probably best to keep this option to 'false' as the default -# suggests it. This option should only be used while doing some complex -# CRUSH map. It allows you to force a specific location for a set of OSDs. -# -# The following options will build a ceph.conf with OSD sections -# Example: -# [osd.X] -# osd crush location = "root=location" -# -# This works with your inventory file -# To match the following 'osd_crush_location' option the inventory must look like: -# -# [osds] -# osd0 ceph_crush_root=foo ceph_crush_rack=bar - -#crush_location: false -#osd_crush_location: "\"root={{ ceph_crush_root }} rack={{ ceph_crush_rack }} host={{ ansible_hostname }}\"" - - -############## -# CEPH OPTIONS -############## - -# Devices to be used as OSDs -# You can pre-provision disks that are not present yet. -# Ansible will just skip them. Newly added disk will be -# automatically configured during the next run. -# - - -# Declare devices to be used as OSDs -# All scenario(except 3rd) inherit from the following device declaration - -devices: -# - /dev/sda -# - /dev/sdc -# - /dev/sdd -# - /dev/sde - -#devices: [] - - -#'osd_auto_discovery' mode prevents you from filling out the 'devices' variable above. -# You can use this option with First and Forth and Fifth OSDS scenario. -# Device discovery is based on the Ansible fact 'ansible_devices' -# which reports all the devices on a system. If chosen all the disks -# found will be passed to ceph-disk. You should not be worried on using -# this option since ceph-disk has a built-in check which looks for empty devices. -# Thus devices with existing partition tables will not be used. -# -#osd_auto_discovery: false - -# Encrypt your OSD device using dmcrypt -# If set to True, no matter which osd_objecstore and osd_scenario you use the data will be encrypted -#dmcrypt: "{{ True if dmcrytpt_journal_collocation or dmcrypt_dedicated_journal else False }}" # backward compatibility with stable-2.2, will disappear in stable 3.1 - - -# I. First scenario: collocated -# -# To enable this scenario do: osd_scenario: collocated -# -# -# If osd_objectstore: filestore is enabled both 'ceph data' and 'ceph journal' partitions -# will be stored on the same device. -# -# If osd_objectstore: bluestore is enabled 'ceph data', 'ceph block', 'ceph block.db', 'ceph block.wal' will be stored -# on the same device. The device will get 2 partitions: -# - One for 'data', called 'ceph data' -# - One for 'ceph block', 'ceph block.db', 'ceph block.wal' called 'ceph block' -# -# Example of what you will get: -# [root@ceph-osd0 ~]# blkid /dev/sda* -# /dev/sda: PTTYPE="gpt" -# /dev/sda1: UUID="9c43e346-dd6e-431f-92d8-cbed4ccb25f6" TYPE="xfs" PARTLABEL="ceph data" PARTUUID="749c71c9-ed8f-4930-82a7-a48a3bcdb1c7" -# /dev/sda2: PARTLABEL="ceph block" PARTUUID="e6ca3e1d-4702-4569-abfa-e285de328e9d" -# - -#osd_scenario: "{{ 'collocated' if journal_collocation or dmcrytpt_journal_collocation else 'non-collocated' if raw_multi_journal or dmcrypt_dedicated_journal else 'dummy' }}" # backward compatibility with stable-2.2, will disappear in stable 3.1 -#valid_osd_scenarios: -# - collocated -# - non-collocated -# - lvm -osd_scenario: collocated - -# II. Second scenario: non-collocated -# -# To enable this scenario do: osd_scenario: non-collocated -# -# If osd_objectstore: filestore is enabled 'ceph data' and 'ceph journal' partitions -# will be stored on different devices: -# - 'ceph data' will be stored on the device listed in 'devices' -# - 'ceph journal' will be stored on the device listed in 'dedicated_devices' -# -# Let's take an example, imagine 'devices' was declared like this: -# -# devices: -# - /dev/sda -# - /dev/sdb -# - /dev/sdc -# - /dev/sdd -# -# And 'dedicated_devices' was declared like this: -# -# dedicated_devices: -# - /dev/sdf -# - /dev/sdf -# - /dev/sdg -# - /dev/sdg -# -# This will result in the following mapping: -# - /dev/sda will have /dev/sdf1 as journal -# - /dev/sdb will have /dev/sdf2 as a journal -# - /dev/sdc will have /dev/sdg1 as a journal -# - /dev/sdd will have /dev/sdg2 as a journal -# -# -# If osd_objectstore: bluestore is enabled, both 'ceph block.db' and 'ceph block.wal' partitions will be stored -# on a dedicated device. -# -# So the following will happen: -# - The devices listed in 'devices' will get 2 partitions, one for 'block' and one for 'data'. -# 'data' is only 100MB big and do not store any of your data, it's just a bunch of Ceph metadata. -# 'block' will store all your actual data. -# - The devices in 'dedicated_devices' will get 1 partition for RocksDB DB, called 'block.db' -# and one for RocksDB WAL, called 'block.wal' -# -# By default dedicated_devices will represent block.db -# -# Example of what you will get: -# [root@ceph-osd0 ~]# blkid /dev/sd* -# /dev/sda: PTTYPE="gpt" -# /dev/sda1: UUID="c6821801-2f21-4980-add0-b7fc8bd424d5" TYPE="xfs" PARTLABEL="ceph data" PARTUUID="f2cc6fa8-5b41-4428-8d3f-6187453464d0" -# /dev/sda2: PARTLABEL="ceph block" PARTUUID="ea454807-983a-4cf2-899e-b2680643bc1c" -# /dev/sdb: PTTYPE="gpt" -# /dev/sdb1: PARTLABEL="ceph block.db" PARTUUID="af5b2d74-4c08-42cf-be57-7248c739e217" -# /dev/sdb2: PARTLABEL="ceph block.wal" PARTUUID="af3f8327-9aa9-4c2b-a497-cf0fe96d126a" -#dedicated_devices: [] - - -# More device granularity for Bluestore -# -# ONLY if osd_objectstore: bluestore is enabled. -# -# By default, if 'bluestore_wal_devices' is empty, it will get the content of 'dedicated_devices'. -# If set, then you will have a dedicated partition on a specific device for block.wal. -# -# Example of what you will get: -# [root@ceph-osd0 ~]# blkid /dev/sd* -# /dev/sda: PTTYPE="gpt" -# /dev/sda1: UUID="39241ae9-d119-4335-96b3-0898da8f45ce" TYPE="xfs" PARTLABEL="ceph data" PARTUUID="961e7313-bdb7-49e7-9ae7-077d65c4c669" -# /dev/sda2: PARTLABEL="ceph block" PARTUUID="bff8e54e-b780-4ece-aa16-3b2f2b8eb699" -# /dev/sdb: PTTYPE="gpt" -# /dev/sdb1: PARTLABEL="ceph block.db" PARTUUID="0734f6b6-cc94-49e9-93de-ba7e1d5b79e3" -# /dev/sdc: PTTYPE="gpt" -# /dev/sdc1: PARTLABEL="ceph block.wal" PARTUUID="824b84ba-6777-4272-bbbd-bfe2a25cecf3" -#bluestore_wal_devices: "{{ dedicated_devices }}" - -# III. Use ceph-volume to create OSDs from logical volumes. -# Use 'osd_scenario: lvm' to enable this scenario. Currently we only support dedicated journals -# when using lvm, not collocated journals. -# lvm_volumes is a list of dictionaries. Each dictionary must contain a data, journal and vg_name -# key. Any logical volume or logical group used must be a name and not a path. -# data must be a logical volume -# journal can be either a lv, device or partition. You can not use the same journal for many data lvs. -# data_vg must be the volume group name of the data lv -# journal_vg is optional and must be the volume group name of the journal lv, if applicable -# For example: -# lvm_volumes: -# - data: data-lv1 -# data_vg: vg1 -# journal: journal-lv1 -# journal_vg: vg2 -# - data: data-lv2 -# journal: /dev/sda -# data_vg: vg1 -# - data: data-lv3 -# journal: /dev/sdb1 -# data_vg: vg2 -#lvm_volumes: [] - - -########## -# DOCKER # -########## - -#ceph_config_keys: [] # DON'T TOUCH ME - -# Resource limitation -# For the whole list of limits you can apply see: docs.docker.com/engine/admin/resource_constraints -# Default values are based from: https://access.redhat.com/documentation/en-us/red_hat_ceph_storage/2/html/red_hat_ceph_storage_hardware_guide/minimum_recommendations -# These options can be passed using the 'ceph_osd_docker_extra_env' variable. -#ceph_osd_docker_memory_limit: 1g -#ceph_osd_docker_cpu_limit: 1 - -# PREPARE DEVICE -# -# WARNING /!\ DMCRYPT scenario ONLY works with Docker version 1.12.5 and above -# -#ceph_osd_docker_devices: "{{ devices }}" -#ceph_osd_docker_prepare_env: -e OSD_JOURNAL_SIZE={{ journal_size }} - -# ACTIVATE DEVICE -# -#ceph_osd_docker_extra_env: -#ceph_osd_docker_run_script_path: "/usr/share" # script called by systemd to run the docker command - - -########### -# SYSTEMD # -########### - -# ceph_osd_systemd_overrides will override the systemd settings -# for the ceph-osd services. -# For example,to set "PrivateDevices=false" you can specify: -#ceph_osd_systemd_overrides: -# Service: -# PrivateDevices: False - +--- +# Variables here are applicable to all host groups NOT roles + +# This sample file generated by generate_group_vars_sample.sh + +# Dummy variable to avoid error because ansible does not recognize the +# file as a good configuration file when no variable in it. +dummy: + +# You can override default vars defined in defaults/main.yml here, +# but I would advice to use host or group vars instead + +#raw_journal_devices: "{{ dedicated_devices }}" # backward compatibility with stable-2.2, will disappear in stable 3.1 +#journal_collocation: False # backward compatibility with stable-2.2, will disappear in stable 3.1 +#raw_multi_journal: False # backward compatibility with stable-2.2, will disappear in stable 3.1 +#dmcrytpt_journal_collocation: False # backward compatibility with stable-2.2, will disappear in stable 3.1 +#dmcrypt_dedicated_journal: False # backward compatibility with stable-2.2, will disappear in stable 3.1 + + +########### +# GENERAL # +########### + +# Even though OSD nodes should not have the admin key +# at their disposal, some people might want to have it +# distributed on OSD nodes. Setting 'copy_admin_key' to 'true' +# will copy the admin key to the /etc/ceph/ directory +#copy_admin_key: false + + +#################### +# OSD CRUSH LOCATION +#################### + +# /!\ +# +# BE EXTREMELY CAREFUL WITH THIS OPTION +# DO NOT USE IT UNLESS YOU KNOW WHAT YOU ARE DOING +# +# /!\ +# +# It is probably best to keep this option to 'false' as the default +# suggests it. This option should only be used while doing some complex +# CRUSH map. It allows you to force a specific location for a set of OSDs. +# +# The following options will build a ceph.conf with OSD sections +# Example: +# [osd.X] +# osd crush location = "root=location" +# +# This works with your inventory file +# To match the following 'osd_crush_location' option the inventory must look like: +# +# [osds] +# osd0 ceph_crush_root=foo ceph_crush_rack=bar + +#crush_location: false +#osd_crush_location: "\"root={{ ceph_crush_root }} rack={{ ceph_crush_rack }} host={{ ansible_hostname }}\"" + + +############## +# CEPH OPTIONS +############## + +# Devices to be used as OSDs +# You can pre-provision disks that are not present yet. +# Ansible will just skip them. Newly added disk will be +# automatically configured during the next run. +# + + +# Declare devices to be used as OSDs +# All scenario(except 3rd) inherit from the following device declaration + +devices: +# - /dev/sda +# - /dev/sdc +# - /dev/sdd +# - /dev/sde + +#devices: [] + + +#'osd_auto_discovery' mode prevents you from filling out the 'devices' variable above. +# You can use this option with First and Forth and Fifth OSDS scenario. +# Device discovery is based on the Ansible fact 'ansible_devices' +# which reports all the devices on a system. If chosen all the disks +# found will be passed to ceph-disk. You should not be worried on using +# this option since ceph-disk has a built-in check which looks for empty devices. +# Thus devices with existing partition tables will not be used. +# +#osd_auto_discovery: false + +# Encrypt your OSD device using dmcrypt +# If set to True, no matter which osd_objecstore and osd_scenario you use the data will be encrypted +#dmcrypt: "{{ True if dmcrytpt_journal_collocation or dmcrypt_dedicated_journal else False }}" # backward compatibility with stable-2.2, will disappear in stable 3.1 + + +# I. First scenario: collocated +# +# To enable this scenario do: osd_scenario: collocated +# +# +# If osd_objectstore: filestore is enabled both 'ceph data' and 'ceph journal' partitions +# will be stored on the same device. +# +# If osd_objectstore: bluestore is enabled 'ceph data', 'ceph block', 'ceph block.db', 'ceph block.wal' will be stored +# on the same device. The device will get 2 partitions: +# - One for 'data', called 'ceph data' +# - One for 'ceph block', 'ceph block.db', 'ceph block.wal' called 'ceph block' +# +# Example of what you will get: +# [root@ceph-osd0 ~]# blkid /dev/sda* +# /dev/sda: PTTYPE="gpt" +# /dev/sda1: UUID="9c43e346-dd6e-431f-92d8-cbed4ccb25f6" TYPE="xfs" PARTLABEL="ceph data" PARTUUID="749c71c9-ed8f-4930-82a7-a48a3bcdb1c7" +# /dev/sda2: PARTLABEL="ceph block" PARTUUID="e6ca3e1d-4702-4569-abfa-e285de328e9d" +# + +#osd_scenario: "{{ 'collocated' if journal_collocation or dmcrytpt_journal_collocation else 'non-collocated' if raw_multi_journal or dmcrypt_dedicated_journal else 'dummy' }}" # backward compatibility with stable-2.2, will disappear in stable 3.1 +#valid_osd_scenarios: +# - collocated +# - non-collocated +# - lvm +osd_scenario: collocated + +# II. Second scenario: non-collocated +# +# To enable this scenario do: osd_scenario: non-collocated +# +# If osd_objectstore: filestore is enabled 'ceph data' and 'ceph journal' partitions +# will be stored on different devices: +# - 'ceph data' will be stored on the device listed in 'devices' +# - 'ceph journal' will be stored on the device listed in 'dedicated_devices' +# +# Let's take an example, imagine 'devices' was declared like this: +# +# devices: +# - /dev/sda +# - /dev/sdb +# - /dev/sdc +# - /dev/sdd +# +# And 'dedicated_devices' was declared like this: +# +# dedicated_devices: +# - /dev/sdf +# - /dev/sdf +# - /dev/sdg +# - /dev/sdg +# +# This will result in the following mapping: +# - /dev/sda will have /dev/sdf1 as journal +# - /dev/sdb will have /dev/sdf2 as a journal +# - /dev/sdc will have /dev/sdg1 as a journal +# - /dev/sdd will have /dev/sdg2 as a journal +# +# +# If osd_objectstore: bluestore is enabled, both 'ceph block.db' and 'ceph block.wal' partitions will be stored +# on a dedicated device. +# +# So the following will happen: +# - The devices listed in 'devices' will get 2 partitions, one for 'block' and one for 'data'. +# 'data' is only 100MB big and do not store any of your data, it's just a bunch of Ceph metadata. +# 'block' will store all your actual data. +# - The devices in 'dedicated_devices' will get 1 partition for RocksDB DB, called 'block.db' +# and one for RocksDB WAL, called 'block.wal' +# +# By default dedicated_devices will represent block.db +# +# Example of what you will get: +# [root@ceph-osd0 ~]# blkid /dev/sd* +# /dev/sda: PTTYPE="gpt" +# /dev/sda1: UUID="c6821801-2f21-4980-add0-b7fc8bd424d5" TYPE="xfs" PARTLABEL="ceph data" PARTUUID="f2cc6fa8-5b41-4428-8d3f-6187453464d0" +# /dev/sda2: PARTLABEL="ceph block" PARTUUID="ea454807-983a-4cf2-899e-b2680643bc1c" +# /dev/sdb: PTTYPE="gpt" +# /dev/sdb1: PARTLABEL="ceph block.db" PARTUUID="af5b2d74-4c08-42cf-be57-7248c739e217" +# /dev/sdb2: PARTLABEL="ceph block.wal" PARTUUID="af3f8327-9aa9-4c2b-a497-cf0fe96d126a" +#dedicated_devices: [] + + +# More device granularity for Bluestore +# +# ONLY if osd_objectstore: bluestore is enabled. +# +# By default, if 'bluestore_wal_devices' is empty, it will get the content of 'dedicated_devices'. +# If set, then you will have a dedicated partition on a specific device for block.wal. +# +# Example of what you will get: +# [root@ceph-osd0 ~]# blkid /dev/sd* +# /dev/sda: PTTYPE="gpt" +# /dev/sda1: UUID="39241ae9-d119-4335-96b3-0898da8f45ce" TYPE="xfs" PARTLABEL="ceph data" PARTUUID="961e7313-bdb7-49e7-9ae7-077d65c4c669" +# /dev/sda2: PARTLABEL="ceph block" PARTUUID="bff8e54e-b780-4ece-aa16-3b2f2b8eb699" +# /dev/sdb: PTTYPE="gpt" +# /dev/sdb1: PARTLABEL="ceph block.db" PARTUUID="0734f6b6-cc94-49e9-93de-ba7e1d5b79e3" +# /dev/sdc: PTTYPE="gpt" +# /dev/sdc1: PARTLABEL="ceph block.wal" PARTUUID="824b84ba-6777-4272-bbbd-bfe2a25cecf3" +#bluestore_wal_devices: "{{ dedicated_devices }}" + +# III. Use ceph-volume to create OSDs from logical volumes. +# Use 'osd_scenario: lvm' to enable this scenario. Currently we only support dedicated journals +# when using lvm, not collocated journals. +# lvm_volumes is a list of dictionaries. Each dictionary must contain a data, journal and vg_name +# key. Any logical volume or logical group used must be a name and not a path. +# data must be a logical volume +# journal can be either a lv, device or partition. You can not use the same journal for many data lvs. +# data_vg must be the volume group name of the data lv +# journal_vg is optional and must be the volume group name of the journal lv, if applicable +# For example: +# lvm_volumes: +# - data: data-lv1 +# data_vg: vg1 +# journal: journal-lv1 +# journal_vg: vg2 +# - data: data-lv2 +# journal: /dev/sda +# data_vg: vg1 +# - data: data-lv3 +# journal: /dev/sdb1 +# data_vg: vg2 +#lvm_volumes: [] + + +########## +# DOCKER # +########## + +#ceph_config_keys: [] # DON'T TOUCH ME + +# Resource limitation +# For the whole list of limits you can apply see: docs.docker.com/engine/admin/resource_constraints +# Default values are based from: https://access.redhat.com/documentation/en-us/red_hat_ceph_storage/2/html/red_hat_ceph_storage_hardware_guide/minimum_recommendations +# These options can be passed using the 'ceph_osd_docker_extra_env' variable. +#ceph_osd_docker_memory_limit: 1g +#ceph_osd_docker_cpu_limit: 1 + +# PREPARE DEVICE +# +# WARNING /!\ DMCRYPT scenario ONLY works with Docker version 1.12.5 and above +# +#ceph_osd_docker_devices: "{{ devices }}" +#ceph_osd_docker_prepare_env: -e OSD_JOURNAL_SIZE={{ journal_size }} + +# ACTIVATE DEVICE +# +#ceph_osd_docker_extra_env: +#ceph_osd_docker_run_script_path: "/usr/share" # script called by systemd to run the docker command + + +########### +# SYSTEMD # +########### + +# ceph_osd_systemd_overrides will override the systemd settings +# for the ceph-osd services. +# For example,to set "PrivateDevices=false" you can specify: +#ceph_osd_systemd_overrides: +# Service: +# PrivateDevices: False + diff --git a/ci/ansible/group_vars/cinder/cinder.yaml b/ci/ansible/group_vars/cinder/cinder.yaml index 4dbd5b1..bfb1d85 100644 --- a/ci/ansible/group_vars/cinder/cinder.yaml +++ b/ci/ansible/group_vars/cinder/cinder.yaml @@ -1,14 +1,14 @@ -authOptions: - noAuth: true - endpoint: "http://127.0.0.1/identity" - cinderEndpoint: "http://127.0.0.1:8776/v2" - domainId: "Default" - domainName: "Default" - username: "" - password: "" - tenantId: "myproject" - tenantName: "myproject" -pool: - "cinder-lvm@lvm#lvm": - AZ: nova - thin: true +authOptions: + noAuth: true + endpoint: "http://127.0.0.1/identity" + cinderEndpoint: "http://127.0.0.1:8776/v2" + domainId: "Default" + domainName: "Default" + username: "" + password: "" + tenantId: "myproject" + tenantName: "myproject" +pool: + "cinder-lvm@lvm#lvm": + AZ: nova + thin: true diff --git a/ci/ansible/group_vars/common.yml b/ci/ansible/group_vars/common.yml old mode 100644 new mode 100755 index a67b8c8..734d2e3 --- a/ci/ansible/group_vars/common.yml +++ b/ci/ansible/group_vars/common.yml @@ -1,35 +1,34 @@ ---- -# Variables here are applicable to all host groups NOT roles - -# This sample file generated by generate_group_vars_sample.sh - -# Dummy variable to avoid error because ansible does not recognize the -# file as a good configuration file when no variable in it. -dummy: - -# You can override default vars defined in defaults/main.yml here, -# but I would advice to use host or group vars instead - - -########### -# GENERAL # -########### - -workplace: /home/krej # Change this field according to your username, use '/root' if you login as root. - -# These fields are NOT suggested to be modified -remote_url: https://github.com/opensds/opensds.git -opensds_root_dir: "{{ workplace }}/gopath/src/github.com/opensds/opensds" -opensds_build_dir: "{{ opensds_root_dir }}/build" -opensds_config_dir: /etc/opensds -opensds_log_dir: /var/log/opensds - -########### -# GOLANG # -########### - -golang_release: 1.9.2 - -# These fields are NOT suggested to be modified -golang_tarball: go{{ golang_release }}.linux-amd64.tar.gz -golang_download_url: https://storage.googleapis.com/golang/{{ golang_tarball }} +--- +# Dummy variable to avoid error because ansible does not recognize the +# file as a good configuration file when no variable in it. +dummy: + + +########### +# GENERAL # +########### + +workplace: /home/krej # Change this field according to your username, use '/root' if you login as root. + +# These fields are NOT suggested to be modified +remote_url: https://github.com/opensds/opensds.git +opensds_root_dir: "{{ workplace }}/gopath/src/github.com/opensds/opensds" +opensds_build_dir: "{{ opensds_root_dir }}/build" +opensds_config_dir: /etc/opensds +opensds_log_dir: /var/log/opensds + +########### +# GOLANG # +########### + +golang_release: 1.9.2 + +# These fields are NOT suggested to be modified +golang_tarball: go{{ golang_release }}.linux-amd64.tar.gz +golang_download_url: https://storage.googleapis.com/golang/{{ golang_tarball }} + +########### +#CONTAINER# +########### + +container_enabled: false diff --git a/ci/ansible/group_vars/lvm/lvm.yaml b/ci/ansible/group_vars/lvm/lvm.yaml old mode 100644 new mode 100755 index 71d12bb..a5aecb8 --- a/ci/ansible/group_vars/lvm/lvm.yaml +++ b/ci/ansible/group_vars/lvm/lvm.yaml @@ -1,5 +1,5 @@ -tgtBindIp: 127.0.0.1 -pool: - "vg001": # change pool name same to vg_name, but don't change it if you choose ceph backend - diskType: SSD +tgtBindIp: 127.0.0.1 +pool: + "vg001": # change pool name same to vg_name, but don't change it if you choose ceph backend + diskType: SSD AZ: default \ No newline at end of file diff --git a/ci/ansible/group_vars/osdsdb.yml b/ci/ansible/group_vars/osdsdb.yml old mode 100644 new mode 100755 index f5dfdef..c8ef864 --- a/ci/ansible/group_vars/osdsdb.yml +++ b/ci/ansible/group_vars/osdsdb.yml @@ -1,31 +1,33 @@ ---- -# Variables here are applicable to all host groups NOT roles - -# This sample file generated by generate_group_vars_sample.sh - -# Dummy variable to avoid error because ansible does not recognize the -# file as a good configuration file when no variable in it. -dummy: - -# You can override default vars defined in defaults/main.yml here, -# but I would advice to use host or group vars instead - - -########### -# GENERAL # -########### - -db_driver: etcd -db_endpoint: localhost:2379,localhost:2380 -#db_credential: opensds:password@127.0.0.1:3306/dbname - -########### -# ETCD # -########### - -etcd_release: v3.2.0 - -# These fields are not suggested to be modified -etcd_tarball: etcd-{{ etcd_release }}-linux-amd64.tar.gz -etcd_download_url: https://github.com/coreos/etcd/releases/download/{{ etcd_release }}/{{ etcd_tarball }} -etcd_dir: /opt/etcd-{{ etcd_release }}-linux-amd64 +--- +# Dummy variable to avoid error because ansible does not recognize the +# file as a good configuration file when no variable in it. +dummy: + + +########### +# GENERAL # +########### + +db_driver: etcd +db_endpoint: localhost:2379,localhost:2380 +#db_credential: opensds:password@127.0.0.1:3306/dbname + +########### +# ETCD # +########### + +etcd_release: v3.2.0 +etcd_host: 127.0.0.1 +etcd_port: 2379 +etcd_peer_port: 2380 + +# These fields are not suggested to be modified +etcd_tarball: etcd-{{ etcd_release }}-linux-amd64.tar.gz +etcd_download_url: https://github.com/coreos/etcd/releases/download/{{ etcd_release }}/{{ etcd_tarball }} +etcd_dir: /opt/etcd-{{ etcd_release }}-linux-amd64 + +########### +# DOCKER # +########### + +etcd_docker_image: quay.io/coreos/etcd:latest diff --git a/ci/ansible/group_vars/osdsdock.yml b/ci/ansible/group_vars/osdsdock.yml old mode 100644 new mode 100755 index edbfa2a..a8c4ce9 --- a/ci/ansible/group_vars/osdsdock.yml +++ b/ci/ansible/group_vars/osdsdock.yml @@ -1,83 +1,76 @@ ---- -# Variables here are applicable to all host groups NOT roles - -# This sample file generated by generate_group_vars_sample.sh - -# Dummy variable to avoid error because ansible does not recognize the -# file as a good configuration file when no variable in it. -dummy: - -# You can override default vars defined in defaults/main.yml here, -# but I would advice to use host or group vars instead - - -########### -# GENERAL # -########### - -# Change it according to your backend, currently support 'lvm', 'ceph', 'cinder' -enabled_backend: lvm - -# These fields are NOT suggested to be modified -dock_endpoint: localhost:50050 -dock_log_file: "{{ opensds_log_dir }}/osdsdock.log" - -########### -# LVM # -########### - -pv_device: /dev/sdb # Specify a block device and ensure it existed if you choose lvm -vg_name: vg001 # Specify a name randomly - -# These fields are NOT suggested to be modified -lvm_name: lvm backend -lvm_description: This is a lvm backend service -lvm_driver_name: lvm -lvm_config_path: "{{ opensds_config_dir }}/driver/lvm.yaml" - -########### -# CEPH # -########### - -ceph_pool_name: rbd # Specify a name randomly - -# These fields are NOT suggested to be modified -ceph_name: ceph backend -ceph_description: This is a ceph backend service -ceph_driver_name: ceph -ceph_config_path: "{{ opensds_config_dir }}/driver/ceph.yaml" - -########### -# CINDER # -########### - -# Use block-box install cinder_standalone if true, see details in: -# https://github.com/openstack/cinder/tree/master/contrib/block-box -use_cinder_standalone: true -# If true, you can configure cinder_container_platform, cinder_image_tag, -# cinder_volume_group. - -# Default: debian:stretch, and ubuntu:xenial, centos:7 is also supported. -cinder_container_platform: debian:stretch -# The image tag can be arbitrarily modified, as long as follow the image naming -# conventions, default: debian-cinder -cinder_image_tag: debian-cinder -# The cinder standalone use lvm driver as default driver, therefore `volume_group` -# should be configured, the default is: cinder-volumes. The volume group will be -# removed when use ansible script clean environment. -cinder_volume_group: cinder-volumes -# All source code and volume group file will be placed in the cinder_data_dir: -cinder_data_dir: "{{ workplace }}/cinder_data_dir" - - -# These fields are not suggested to be modified -cinder_name: cinder backend -cinder_description: This is a cinder backend service -cinder_driver_name: cinder -cinder_config_path: "{{ opensds_config_dir }}/driver/cinder.yaml" - -########### -# DOCKER # -########### - -dock_docker_image: dockerio/opensds-dock:zealand +--- +# Dummy variable to avoid error because ansible does not recognize the +# file as a good configuration file when no variable in it. +dummy: + + +########### +# GENERAL # +########### + +# Change it according to your backend, currently support 'lvm', 'ceph', 'cinder' +enabled_backend: lvm + +# These fields are NOT suggested to be modified +dock_endpoint: localhost:50050 +dock_log_file: "{{ opensds_log_dir }}/osdsdock.log" + +########### +# LVM # +########### + +pv_device: /dev/sdc # Specify a block device and ensure it existed if you choose lvm +vg_name: vg001 # Specify a name randomly + +# These fields are NOT suggested to be modified +lvm_name: lvm backend +lvm_description: This is a lvm backend service +lvm_driver_name: lvm +lvm_config_path: "{{ opensds_config_dir }}/driver/lvm.yaml" + +########### +# CEPH # +########### + +ceph_pool_name: rbd # Specify a name randomly + +# These fields are NOT suggested to be modified +ceph_name: ceph backend +ceph_description: This is a ceph backend service +ceph_driver_name: ceph +ceph_config_path: "{{ opensds_config_dir }}/driver/ceph.yaml" + +########### +# CINDER # +########### + +# Use block-box install cinder_standalone if true, see details in: +# https://github.com/openstack/cinder/tree/master/contrib/block-box +use_cinder_standalone: true +# If true, you can configure cinder_container_platform, cinder_image_tag, +# cinder_volume_group. + +# Default: debian:stretch, and ubuntu:xenial, centos:7 is also supported. +cinder_container_platform: debian:stretch +# The image tag can be arbitrarily modified, as long as follow the image naming +# conventions, default: debian-cinder +cinder_image_tag: debian-cinder +# The cinder standalone use lvm driver as default driver, therefore `volume_group` +# should be configured, the default is: cinder-volumes. The volume group will be +# removed when use ansible script clean environment. +cinder_volume_group: cinder-volumes +# All source code and volume group file will be placed in the cinder_data_dir: +cinder_data_dir: "{{ workplace }}/cinder_data_dir" + + +# These fields are not suggested to be modified +cinder_name: cinder backend +cinder_description: This is a cinder backend service +cinder_driver_name: cinder +cinder_config_path: "{{ opensds_config_dir }}/driver/cinder.yaml" + +########### +# DOCKER # +########### + +dock_docker_image: opensdsio/opensds-dock:latest diff --git a/ci/ansible/group_vars/osdslet.yml b/ci/ansible/group_vars/osdslet.yml old mode 100644 new mode 100755 index ab82c0a..f9be9de --- a/ci/ansible/group_vars/osdslet.yml +++ b/ci/ansible/group_vars/osdslet.yml @@ -1,26 +1,19 @@ ---- -# Variables here are applicable to all host groups NOT roles - -# This sample file generated by generate_group_vars_sample.sh - -# Dummy variable to avoid error because ansible does not recognize the -# file as a good configuration file when no variable in it. -dummy: - -# You can override default vars defined in defaults/main.yml here, -# but I would advice to use host or group vars instead - - -########### -# GENERAL # -########### - -# These fields are NOT suggested to be modified -controller_endpoint: localhost:50040 -controller_log_file: "{{ opensds_log_dir }}/osdslet.log" - -########### -# DOCKER # -########### - -controller_docker_image: dockerio/opensds-controller:zealand +--- +# Dummy variable to avoid error because ansible does not recognize the +# file as a good configuration file when no variable in it. +dummy: + + +########### +# GENERAL # +########### + +# These fields are NOT suggested to be modified +controller_endpoint: 0.0.0.0:50040 +controller_log_file: "{{ opensds_log_dir }}/osdslet.log" + +########### +# DOCKER # +########### + +controller_docker_image: opensdsio/opensds-controller:latest diff --git a/ci/ansible/local.hosts b/ci/ansible/local.hosts old mode 100644 new mode 100755 index 36b7cbb..a48639c --- a/ci/ansible/local.hosts +++ b/ci/ansible/local.hosts @@ -1,5 +1,5 @@ -[controllers] -localhost ansible_connection=local - -[docks] -localhost ansible_connection=local +[controllers] +localhost ansible_connection=local + +[docks] +localhost ansible_connection=local diff --git a/ci/ansible/roles/cleaner/tasks/main.yml b/ci/ansible/roles/cleaner/tasks/main.yml old mode 100644 new mode 100755 index 334d5bb..c1c465c --- a/ci/ansible/roles/cleaner/tasks/main.yml +++ b/ci/ansible/roles/cleaner/tasks/main.yml @@ -1,147 +1,167 @@ ---- -- name: remove golang tarball - file: - path: "/opt/{{ golang_tarball }}" - state: absent - force: yes - ignore_errors: yes - -- name: kill etcd daemon service - shell: killall etcd - ignore_errors: yes - when: db_driver == "etcd" - -- name: remove etcd service data - file: - path: "{{ etcd_dir }}" - state: absent - force: yes - ignore_errors: yes - when: db_driver == "etcd" - -- name: remove etcd tarball - file: - path: "/opt/{{ etcd_tarball }}" - state: absent - force: yes - ignore_errors: yes - when: db_driver == "etcd" - -- name: kill osdslet daemon service - shell: killall osdslet - ignore_errors: yes - -- name: kill osdsdock daemon service - shell: killall osdsdock - ignore_errors: yes - -- name: clean all opensds build files - shell: . /etc/profile; make clean - args: - chdir: "{{ opensds_root_dir }}" - -- name: clean all opensds configuration files - file: - path: "{{ opensds_config_dir }}" - state: absent - force: yes - ignore_errors: yes - -- name: clean all opensds log files - file: - path: "{{ opensds_log_dir }}" - state: absent - force: yes - ignore_errors: yes - -- name: check if it existed before cleaning a volume group - shell: vgdisplay {{ vg_name }} - ignore_errors: yes - register: vg_existed - when: enabled_backend == "lvm" - -- name: remove a volume group if lvm backend specified - shell: vgremove {{ vg_name }} - when: enabled_backend == "lvm" and vg_existed.rc == 0 - -- name: check if it existed before cleaning a physical volume - shell: pvdisplay {{ pv_device }} - ignore_errors: yes - register: pv_existed - when: enabled_backend == "lvm" - -- name: remove a physical volume if lvm backend specified - shell: pvremove {{ pv_device }} - when: enabled_backend == "lvm" and pv_existed.rc == 0 - -- name: stop cinder-standalone service - shell: docker-compose down - become: true - args: - chdir: "{{ cinder_data_dir }}/cinder/contrib/block-box" - when: enabled_backend == "cinder" - -- name: clean the volume group of cinder - shell: - _raw_params: | - - # _clean_lvm_volume_group removes all default LVM volumes - # - # Usage: _clean_lvm_volume_group $vg - function _clean_lvm_volume_group { - local vg=$1 - - # Clean out existing volumes - sudo lvremove -f $vg - } - - # _remove_lvm_volume_group removes the volume group - # - # Usage: _remove_lvm_volume_group $vg - function _remove_lvm_volume_group { - local vg=$1 - - # Remove the volume group - sudo vgremove -f $vg - } - - # _clean_lvm_backing_file() removes the backing file of the - # volume group - # - # Usage: _clean_lvm_backing_file() $backing_file - function _clean_lvm_backing_file { - local backing_file=$1 - - # If the backing physical device is a loop device, it was probably setup by DevStack - if [[ -n "$backing_file" ]] && [[ -e "$backing_file" ]]; then - local vg_dev - vg_dev=$(sudo losetup -j $backing_file | awk -F':' '/'.img'/ { print $1}') - if [[ -n "$vg_dev" ]]; then - sudo losetup -d $vg_dev - fi - rm -f $backing_file - fi - } - - # clean_lvm_volume_group() cleans up the volume group and removes the - # backing file - # - # Usage: clean_lvm_volume_group $vg - function clean_lvm_volume_group { - local vg=$1 - - _clean_lvm_volume_group $vg - _remove_lvm_volume_group $vg - # if there is no logical volume left, it's safe to attempt a cleanup - # of the backing file - if [[ -z "$(sudo lvs --noheadings -o lv_name $vg 2>/dev/null)" ]]; then - _clean_lvm_backing_file {{ cinder_data_dir }}/${vg}.img - fi - } - - clean_lvm_volume_group {{cinder_volume_group}} - - args: - executable: /bin/bash - become: true - when: enabled_backend == "cinder" +--- +- name: remove golang tarball + file: + path: "/opt/{{ golang_tarball }}" + state: absent + force: yes + ignore_errors: yes + +- name: kill etcd daemon service + shell: killall etcd + ignore_errors: yes + when: db_driver == "etcd" and container_enabled == false + +- name: kill etcd containerized service + docker: + image: quay.io/coreos/etcd:latest + state: stopped + when: container_enabled == true + +- name: remove etcd service data + file: + path: "{{ etcd_dir }}" + state: absent + force: yes + ignore_errors: yes + when: db_driver == "etcd" + +- name: remove etcd tarball + file: + path: "/opt/{{ etcd_tarball }}" + state: absent + force: yes + ignore_errors: yes + when: db_driver == "etcd" + +- name: kill osdslet daemon service + shell: killall osdslet + ignore_errors: yes + when: container_enabled == false + +- name: kill osdslet containerized service + docker: + image: opensdsio/opensds-controller:latest + state: stopped + when: container_enabled == true + +- name: kill osdsdock daemon service + shell: killall osdsdock + ignore_errors: yes + when: container_enabled == false + +- name: kill osdsdock containerized service + docker: + image: opensdsio/opensds-dock:latest + state: stopped + when: container_enabled == true + +- name: clean all opensds build files + shell: . /etc/profile; make clean + args: + chdir: "{{ opensds_root_dir }}" + +- name: clean all opensds configuration files + file: + path: "{{ opensds_config_dir }}" + state: absent + force: yes + ignore_errors: yes + +- name: clean all opensds log files + file: + path: "{{ opensds_log_dir }}" + state: absent + force: yes + ignore_errors: yes + +- name: check if it existed before cleaning a volume group + shell: vgdisplay {{ vg_name }} + ignore_errors: yes + register: vg_existed + when: enabled_backend == "lvm" + +- name: remove a volume group if lvm backend specified + shell: vgremove {{ vg_name }} + when: enabled_backend == "lvm" and vg_existed.rc == 0 + +- name: check if it existed before cleaning a physical volume + shell: pvdisplay {{ pv_device }} + ignore_errors: yes + register: pv_existed + when: enabled_backend == "lvm" + +- name: remove a physical volume if lvm backend specified + shell: pvremove {{ pv_device }} + when: enabled_backend == "lvm" and pv_existed.rc == 0 + +- name: stop cinder-standalone service + shell: docker-compose down + become: true + args: + chdir: "{{ cinder_data_dir }}/cinder/contrib/block-box" + when: enabled_backend == "cinder" + +- name: clean the volume group of cinder + shell: + _raw_params: | + + # _clean_lvm_volume_group removes all default LVM volumes + # + # Usage: _clean_lvm_volume_group $vg + function _clean_lvm_volume_group { + local vg=$1 + + # Clean out existing volumes + sudo lvremove -f $vg + } + + # _remove_lvm_volume_group removes the volume group + # + # Usage: _remove_lvm_volume_group $vg + function _remove_lvm_volume_group { + local vg=$1 + + # Remove the volume group + sudo vgremove -f $vg + } + + # _clean_lvm_backing_file() removes the backing file of the + # volume group + # + # Usage: _clean_lvm_backing_file() $backing_file + function _clean_lvm_backing_file { + local backing_file=$1 + + # If the backing physical device is a loop device, it was probably setup by DevStack + if [[ -n "$backing_file" ]] && [[ -e "$backing_file" ]]; then + local vg_dev + vg_dev=$(sudo losetup -j $backing_file | awk -F':' '/'.img'/ { print $1}') + if [[ -n "$vg_dev" ]]; then + sudo losetup -d $vg_dev + fi + rm -f $backing_file + fi + } + + # clean_lvm_volume_group() cleans up the volume group and removes the + # backing file + # + # Usage: clean_lvm_volume_group $vg + function clean_lvm_volume_group { + local vg=$1 + + _clean_lvm_volume_group $vg + _remove_lvm_volume_group $vg + # if there is no logical volume left, it's safe to attempt a cleanup + # of the backing file + if [[ -z "$(sudo lvs --noheadings -o lv_name $vg 2>/dev/null)" ]]; then + _clean_lvm_backing_file {{ cinder_data_dir }}/${vg}.img + fi + } + + clean_lvm_volume_group {{cinder_volume_group}} + + args: + executable: /bin/bash + become: true + when: enabled_backend == "cinder" diff --git a/ci/ansible/roles/common/tasks/main.yml b/ci/ansible/roles/common/tasks/main.yml old mode 100644 new mode 100755 index 7c9a49a..d6bef82 --- a/ci/ansible/roles/common/tasks/main.yml +++ b/ci/ansible/roles/common/tasks/main.yml @@ -1,135 +1,121 @@ ---- -# If we can't get golang installed before any module is used we will fail -# so just try what we can to get it installed -- name: check for golang - stat: - path: /usr/local/go - ignore_errors: yes - register: systemgolang - -- name: install golang for debian based systems - shell: - cmd: | - set -e - set -x - - wget {{ golang_download_url }} -P /opt/ - tar xvf /opt/{{ golang_tarball }} -C /usr/local/ - cat >> /etc/profile < opensds.conf <> /etc/profile < opensds.conf <>etcd.log & - become: true - args: - chdir: "{{ etcd_dir }}" - when: service_etcd_status.rc != 0 - -- name: check etcd cluster health - shell: ./etcdctl cluster-health - become: true - args: - chdir: "{{ etcd_dir }}" +--- +- name: check for etcd existed + stat: + path: "{{ etcd_dir }}/etcd" + ignore_errors: yes + register: etcdexisted + +- name: download etcd + get_url: + url={{ etcd_download_url }} + dest=/opt/{{ etcd_tarball }} + when: + - etcdexisted.stat.exists is undefined or etcdexisted.stat.exists == false + +- name: extract the etcd tarball + unarchive: + src=/opt/{{ etcd_tarball }} + dest=/opt/ + when: + - etcdexisted.stat.exists is undefined or etcdexisted.stat.exists == false + +- name: Check if etcd is running + shell: ps aux | grep etcd | grep -v grep + ignore_errors: true + register: service_etcd_status + +- name: run etcd daemon service + shell: nohup ./etcd --advertise-client-urls http://{{ etcd_host }}:{{ etcd_port }} --listen-client-urls http://{{ etcd_host }}:{{ etcd_port }} -advertise-client-urls http://{{ etcd_host }}:{{ etcd_peer_port }} -listen-peer-urls http://{{ etcd_host }}:{{ etcd_peer_port }} &>>etcd.log & + become: true + args: + chdir: "{{ etcd_dir }}" + when: service_etcd_status.rc != 0 + +- name: check etcd cluster health + shell: ./etcdctl cluster-health + become: true + ignore_errors: true + args: + chdir: "{{ etcd_dir }}" diff --git a/ci/ansible/roles/osdsdb/tasks/main.yml b/ci/ansible/roles/osdsdb/tasks/main.yml old mode 100644 new mode 100755 index 41cbd09..03530b4 --- a/ci/ansible/roles/osdsdb/tasks/main.yml +++ b/ci/ansible/roles/osdsdb/tasks/main.yml @@ -1,4 +1,8 @@ ---- -- name: include scenarios/etcd.yml - include: scenarios/etcd.yml - when: db_driver == "etcd" \ No newline at end of file +--- +- name: include scenarios/etcd.yml + include: scenarios/etcd.yml + when: db_driver == "etcd" and container_enabled == false + +- name: include scenarios/container.yml + include: scenarios/container.yml + when: db_driver == "etcd" and container_enabled == true diff --git a/ci/ansible/roles/osdsdock/scenarios/ceph.yml b/ci/ansible/roles/osdsdock/scenarios/ceph.yml old mode 100644 new mode 100755 index 2fa66b2..77c8b49 --- a/ci/ansible/roles/osdsdock/scenarios/ceph.yml +++ b/ci/ansible/roles/osdsdock/scenarios/ceph.yml @@ -1,69 +1,74 @@ ---- -- name: install ceph-common external package when ceph backend enabled - apt: - name: ceph-common - when: enabled_backend == "ceph" - -- name: check for ceph-ansible source code existed - stat: - path: /opt/ceph-ansible - ignore_errors: yes - register: cephansibleexisted - -- name: download ceph-ansible source code - git: - repo: https://github.com/ceph/ceph-ansible.git - dest: /opt/ceph-ansible - when: - - cephansibleexisted.stat.exists is undefined or cephansibleexisted.stat.exists == false - -- name: copy ceph inventory host into ceph-ansible directory - copy: - src: ../../../group_vars/ceph/ceph.hosts - dest: /opt/ceph-ansible/ceph.hosts - -- name: copy ceph all.yml file into ceph-ansible group_vars directory - copy: - src: ../../../group_vars/ceph/all.yml - dest: /opt/ceph-ansible/group_vars/all.yml - -- name: copy ceph osds.yml file into ceph-ansible group_vars directory - copy: - src: ../../../group_vars/ceph/osds.yml - dest: /opt/ceph-ansible/group_vars/osds.yml - -- name: copy site.yml.sample to site.yml in ceph-ansible - copy: - src: /opt/ceph-ansible/site.yml.sample - dest: /opt/ceph-ansible/site.yml - -- name: ping all hosts - shell: ansible all -m ping -i ceph.hosts - become: true - args: - chdir: /opt/ceph-ansible - -- name: run ceph-ansible playbook - shell: ansible-playbook site.yml -i ceph.hosts - become: true - args: - chdir: /opt/ceph-ansible - -- name: Check if ceph osd is running - shell: ps aux | grep ceph-osd | grep -v grep - ignore_errors: false - changed_when: false - register: service_ceph_osd_status - -- name: Check if ceph mon is running - shell: ps aux | grep ceph-mon | grep -v grep - ignore_errors: false - changed_when: false - register: service_ceph_mon_status - -- name: Create a pool and initialize it. - shell: ceph osd pool create {{ ceph_pool_name }} 100 && ceph osd pool set {{ ceph_pool_name }} size 1 - ignore_errors: yes - changed_when: false - register: ceph_init_pool +--- +- name: install ceph-common external package when ceph backend enabled + apt: + name: ceph-common + when: enabled_backend == "ceph" + +- name: copy opensds ceph backend file if specify ceph backend + copy: + src: ../../../group_vars/ceph/ceph.yaml + dest: "{{ ceph_config_path }}" + +- name: check for ceph-ansible source code existed + stat: + path: /opt/ceph-ansible + ignore_errors: yes + register: cephansibleexisted + +- name: download ceph-ansible source code + git: + repo: https://github.com/ceph/ceph-ansible.git + dest: /opt/ceph-ansible + when: + - cephansibleexisted.stat.exists is undefined or cephansibleexisted.stat.exists == false + +- name: copy ceph inventory host into ceph-ansible directory + copy: + src: ../../../group_vars/ceph/ceph.hosts + dest: /opt/ceph-ansible/ceph.hosts + +- name: copy ceph all.yml file into ceph-ansible group_vars directory + copy: + src: ../../../group_vars/ceph/all.yml + dest: /opt/ceph-ansible/group_vars/all.yml + +- name: copy ceph osds.yml file into ceph-ansible group_vars directory + copy: + src: ../../../group_vars/ceph/osds.yml + dest: /opt/ceph-ansible/group_vars/osds.yml + +- name: copy site.yml.sample to site.yml in ceph-ansible + copy: + src: /opt/ceph-ansible/site.yml.sample + dest: /opt/ceph-ansible/site.yml + +- name: ping all hosts + shell: ansible all -m ping -i ceph.hosts + become: true + args: + chdir: /opt/ceph-ansible + +- name: run ceph-ansible playbook + shell: ansible-playbook site.yml -i ceph.hosts + become: true + args: + chdir: /opt/ceph-ansible + +- name: Check if ceph osd is running + shell: ps aux | grep ceph-osd | grep -v grep + ignore_errors: false + changed_when: false + register: service_ceph_osd_status + +- name: Check if ceph mon is running + shell: ps aux | grep ceph-mon | grep -v grep + ignore_errors: false + changed_when: false + register: service_ceph_mon_status + +- name: Create a pool and initialize it. + shell: ceph osd pool create {{ ceph_pool_name }} 100 && ceph osd pool set {{ ceph_pool_name }} size 1 + ignore_errors: yes + changed_when: false + register: ceph_init_pool when: service_ceph_mon_status.rc == 0 and service_ceph_osd_status.rc == 0 \ No newline at end of file diff --git a/ci/ansible/roles/osdsdock/scenarios/cinder.yml b/ci/ansible/roles/osdsdock/scenarios/cinder.yml old mode 100644 new mode 100755 index 7313caa..333c5c0 --- a/ci/ansible/roles/osdsdock/scenarios/cinder.yml +++ b/ci/ansible/roles/osdsdock/scenarios/cinder.yml @@ -1 +1,5 @@ ---- +--- +- name: copy opensds cinder backend file if specify cinder backend + copy: + src: ../../../group_vars/cinder/cinder.yaml + dest: "{{ cinder_config_path }}" diff --git a/ci/ansible/roles/osdsdock/scenarios/cinder_standalone.yml b/ci/ansible/roles/osdsdock/scenarios/cinder_standalone.yml index 7939d75..7bf2b97 100644 --- a/ci/ansible/roles/osdsdock/scenarios/cinder_standalone.yml +++ b/ci/ansible/roles/osdsdock/scenarios/cinder_standalone.yml @@ -1,141 +1,146 @@ ---- - -- name: install python-pip - apt: - name: python-pip - -- name: install lvm2 - apt: - name: lvm2 - -- name: install thin-provisioning-tools - apt: - name: thin-provisioning-tools - -- name: install docker-compose - pip: - name: docker-compose - -- name: create directory to save source code and volume group file - file: - path: "{{ cinder_data_dir }}" - state: directory - recurse: yes - -- name: create volume group in thin mode - shell: - _raw_params: | - function _create_lvm_volume_group { - local vg=$1 - local size=$2 - - local backing_file={{ cinder_data_dir }}/${vg}.img - if ! sudo vgs $vg; then - # Only create if the file doesn't already exists - [[ -f $backing_file ]] || truncate -s $size $backing_file - local vg_dev - vg_dev=`sudo losetup -f --show $backing_file` - - # Only create volume group if it doesn't already exist - if ! sudo vgs $vg; then - sudo vgcreate $vg $vg_dev - fi - fi - } - modprobe dm_thin_pool - _create_lvm_volume_group {{ cinder_volume_group }} 10G - args: - executable: /bin/bash - become: true - -- name: check for python-cinderclient source code existed - stat: - path: "{{ cinder_data_dir }}/python-cinderclient" - ignore_errors: yes - register: cinderclient_existed - -- name: download python-cinderclient source code - git: - repo: https://github.com/openstack/python-cinderclient.git - dest: "{{ cinder_data_dir }}/python-cinderclient" - when: - - cinderclient_existed.stat.exists is undefined or cinderclient_existed.stat.exists == false - -# Tested successfully in this version `ab0185bfc6e8797a35a2274c2a5ee03afb03dd60` -# git checkout -b ab0185bfc6e8797a35a2274c2a5ee03afb03dd60 -- name: pip install cinderclinet - shell: | - pip install -e . - become: true - args: - chdir: "{{ cinder_data_dir }}/python-cinderclient" - -- name: check for python-brick-cinderclient-ext source code existed - stat: - path: "{{ cinder_data_dir }}/python-brick-cinderclient-ext" - ignore_errors: yes - register: brick_existed - -- name: download python-brick-cinderclient-ext source code - git: - repo: https://github.com/openstack/python-brick-cinderclient-ext.git - dest: "{{ cinder_data_dir }}/python-brick-cinderclient-ext" - when: - - brick_existed.stat.exists is undefined or brick_existed.stat.exists == false - -# Tested successfully in this version `a281e67bf9c12521ea5433f86cec913854826a33` -# git checkout -b a281e67bf9c12521ea5433f86cec913854826a33 -- name: pip install python-brick-cinderclient-ext - shell: | - pip install -e . - become: true - args: - chdir: "{{ cinder_data_dir }}/python-brick-cinderclient-ext" - - -- name: check for cinder source code existed - stat: - path: "{{ cinder_data_dir }}/cinder" - ignore_errors: yes - register: cinder_existed - -- name: download cinder source code - git: - repo: https://github.com/openstack/cinder.git - dest: "{{ cinder_data_dir }}/cinder" - when: - - cinder_existed.stat.exists is undefined or cinder_existed.stat.exists == false - -# Tested successfully in this version `7bbc95344d3961d0bf059252723fa40b33d4b3fe` -# git checkout -b 7bbc95344d3961d0bf059252723fa40b33d4b3fe -- name: update blockbox configuration - shell: | - sed -i "s/PLATFORM ?= debian:stretch/PLATFORM ?= {{ cinder_container_platform }}/g" Makefile - sed -i "s/TAG ?= debian-cinder:latest/TAG ?= {{ cinder_image_tag }}:latest/g" Makefile - - sed -i "s/image: debian-cinder/image: {{ cinder_image_tag }}/g" docker-compose.yml - sed -i "s/image: lvm-debian-cinder/image: lvm-{{ cinder_image_tag }}/g" docker-compose.yml - - sed -i "s/volume_group = cinder-volumes /volume_group = {{ cinder_volume_group }}/g" etc/cinder.conf - become: true - args: - chdir: "{{ cinder_data_dir }}/cinder/contrib/block-box" - -- name: make blockbox - shell: make blockbox - become: true - args: - chdir: "{{ cinder_data_dir }}/cinder/contrib/block-box" - -- name: start cinder-standalone service - shell: docker-compose up -d - become: true - args: - chdir: "{{ cinder_data_dir }}/cinder/contrib/block-box" - -- name: wait for cinder service to start normally - wait_for: - host: 127.0.0.1 - port: 8776 - delay: 2 - timeout: 120 +--- + +- name: install python-pip + apt: + name: python-pip + +- name: install lvm2 + apt: + name: lvm2 + +- name: install thin-provisioning-tools + apt: + name: thin-provisioning-tools + +- name: install docker-compose + pip: + name: docker-compose + +- name: copy opensds cinder backend file if specify cinder backend + copy: + src: ../../../group_vars/cinder/cinder.yaml + dest: "{{ cinder_config_path }}" + +- name: create directory to save source code and volume group file + file: + path: "{{ cinder_data_dir }}" + state: directory + recurse: yes + +- name: create volume group in thin mode + shell: + _raw_params: | + function _create_lvm_volume_group { + local vg=$1 + local size=$2 + + local backing_file={{ cinder_data_dir }}/${vg}.img + if ! sudo vgs $vg; then + # Only create if the file doesn't already exists + [[ -f $backing_file ]] || truncate -s $size $backing_file + local vg_dev + vg_dev=`sudo losetup -f --show $backing_file` + + # Only create volume group if it doesn't already exist + if ! sudo vgs $vg; then + sudo vgcreate $vg $vg_dev + fi + fi + } + modprobe dm_thin_pool + _create_lvm_volume_group {{ cinder_volume_group }} 10G + args: + executable: /bin/bash + become: true + +- name: check for python-cinderclient source code existed + stat: + path: "{{ cinder_data_dir }}/python-cinderclient" + ignore_errors: yes + register: cinderclient_existed + +- name: download python-cinderclient source code + git: + repo: https://github.com/openstack/python-cinderclient.git + dest: "{{ cinder_data_dir }}/python-cinderclient" + when: + - cinderclient_existed.stat.exists is undefined or cinderclient_existed.stat.exists == false + +# Tested successfully in this version `ab0185bfc6e8797a35a2274c2a5ee03afb03dd60` +# git checkout -b ab0185bfc6e8797a35a2274c2a5ee03afb03dd60 +- name: pip install cinderclinet + shell: | + pip install -e . + become: true + args: + chdir: "{{ cinder_data_dir }}/python-cinderclient" + +- name: check for python-brick-cinderclient-ext source code existed + stat: + path: "{{ cinder_data_dir }}/python-brick-cinderclient-ext" + ignore_errors: yes + register: brick_existed + +- name: download python-brick-cinderclient-ext source code + git: + repo: https://github.com/openstack/python-brick-cinderclient-ext.git + dest: "{{ cinder_data_dir }}/python-brick-cinderclient-ext" + when: + - brick_existed.stat.exists is undefined or brick_existed.stat.exists == false + +# Tested successfully in this version `a281e67bf9c12521ea5433f86cec913854826a33` +# git checkout -b a281e67bf9c12521ea5433f86cec913854826a33 +- name: pip install python-brick-cinderclient-ext + shell: | + pip install -e . + become: true + args: + chdir: "{{ cinder_data_dir }}/python-brick-cinderclient-ext" + + +- name: check for cinder source code existed + stat: + path: "{{ cinder_data_dir }}/cinder" + ignore_errors: yes + register: cinder_existed + +- name: download cinder source code + git: + repo: https://github.com/openstack/cinder.git + dest: "{{ cinder_data_dir }}/cinder" + when: + - cinder_existed.stat.exists is undefined or cinder_existed.stat.exists == false + +# Tested successfully in this version `7bbc95344d3961d0bf059252723fa40b33d4b3fe` +# git checkout -b 7bbc95344d3961d0bf059252723fa40b33d4b3fe +- name: update blockbox configuration + shell: | + sed -i "s/PLATFORM ?= debian:stretch/PLATFORM ?= {{ cinder_container_platform }}/g" Makefile + sed -i "s/TAG ?= debian-cinder:latest/TAG ?= {{ cinder_image_tag }}:latest/g" Makefile + + sed -i "s/image: debian-cinder/image: {{ cinder_image_tag }}/g" docker-compose.yml + sed -i "s/image: lvm-debian-cinder/image: lvm-{{ cinder_image_tag }}/g" docker-compose.yml + + sed -i "s/volume_group = cinder-volumes /volume_group = {{ cinder_volume_group }}/g" etc/cinder.conf + become: true + args: + chdir: "{{ cinder_data_dir }}/cinder/contrib/block-box" + +- name: make blockbox + shell: make blockbox + become: true + args: + chdir: "{{ cinder_data_dir }}/cinder/contrib/block-box" + +- name: start cinder-standalone service + shell: docker-compose up -d + become: true + args: + chdir: "{{ cinder_data_dir }}/cinder/contrib/block-box" + +- name: wait for cinder service to start normally + wait_for: + host: 127.0.0.1 + port: 8776 + delay: 2 + timeout: 120 diff --git a/ci/ansible/roles/osdsdock/scenarios/lvm.yml b/ci/ansible/roles/osdsdock/scenarios/lvm.yml old mode 100644 new mode 100755 index d1d7b36..5847aa3 --- a/ci/ansible/roles/osdsdock/scenarios/lvm.yml +++ b/ci/ansible/roles/osdsdock/scenarios/lvm.yml @@ -1,22 +1,27 @@ ---- -- name: install lvm2 external package when lvm backend enabled - apt: - name: lvm2 - -- name: check if physical volume existed - shell: pvdisplay {{ pv_device }} - ignore_errors: yes - register: pv_existed - -- name: create a physical volume - shell: pvcreate {{ pv_device }} - when: pv_existed is undefined or pv_existed.rc != 0 - -- name: check if volume group existed - shell: vgdisplay {{ vg_name }} - ignore_errors: yes - register: vg_existed - -- name: create a volume group - shell: vgcreate {{ vg_name }} {{ pv_device }} - when: vg_existed is undefined or vg_existed.rc != 0 +--- +- name: install lvm2 external package when lvm backend enabled + apt: + name: lvm2 + +- name: copy opensds lvm backend file if specify lvm backend + copy: + src: ../../../group_vars/lvm/lvm.yaml + dest: "{{ lvm_config_path }}" + +- name: check if physical volume existed + shell: pvdisplay {{ pv_device }} + ignore_errors: yes + register: pv_existed + +- name: create a physical volume + shell: pvcreate {{ pv_device }} + when: pv_existed is undefined or pv_existed.rc != 0 + +- name: check if volume group existed + shell: vgdisplay {{ vg_name }} + ignore_errors: yes + register: vg_existed + +- name: create a volume group + shell: vgcreate {{ vg_name }} {{ pv_device }} + when: vg_existed is undefined or vg_existed.rc != 0 diff --git a/ci/ansible/roles/osdsdock/tasks/main.yml b/ci/ansible/roles/osdsdock/tasks/main.yml old mode 100644 new mode 100755 index 2462905..68f9fdb --- a/ci/ansible/roles/osdsdock/tasks/main.yml +++ b/ci/ansible/roles/osdsdock/tasks/main.yml @@ -1,31 +1,44 @@ ---- -- name: include scenarios/lvm.yml - include: scenarios/lvm.yml - when: enabled_backend == "lvm" - -- name: include scenarios/ceph.yml - include: scenarios/ceph.yml - when: enabled_backend == "ceph" - -- name: include scenarios/cinder.yml - include: scenarios/cinder.yml - when: enabled_backend == "cinder" and use_cinder_standalone == false - -- name: include scenarios/cinder_standalone.yml - include: scenarios/cinder_standalone.yml - when: enabled_backend == "cinder" and use_cinder_standalone == true - -- name: run osdsdock daemon service - shell: - cmd: | - i=0 - while - i="$((i+1))" - [ "$i" -lt 4 ] - do - nohup bin/osdsdock &>/dev/null & - sleep 5 - ps aux | grep osdsdock | grep -v grep && break - done - args: - chdir: "{{ opensds_build_dir }}/out" +--- +- name: include scenarios/lvm.yml + include: scenarios/lvm.yml + when: enabled_backend == "lvm" + +- name: include scenarios/ceph.yml + include: scenarios/ceph.yml + when: enabled_backend == "ceph" + +- name: include scenarios/cinder.yml + include: scenarios/cinder.yml + when: enabled_backend == "cinder" and use_cinder_standalone == false + +- name: include scenarios/cinder_standalone.yml + include: scenarios/cinder_standalone.yml + when: enabled_backend == "cinder" and use_cinder_standalone == true + +- name: run osdsdock daemon service + shell: + cmd: | + i=0 + while + i="$((i+1))" + [ "$i" -lt 4 ] + do + nohup bin/osdsdock &>/dev/null & + sleep 5 + ps aux | grep osdsdock | grep -v grep && break + done + args: + chdir: "{{ opensds_build_dir }}/out" + when: container_enabled == false + +- name: run osdsdock containerized service + docker: + name: osdsdock + image: opensdsio/opensds-dock:latest + state: started + net: host + privileged: true + volumes: + - "/etc/opensds/:/etc/opensds" + - "/etc/ceph/:/etc/ceph" + when: container_enabled == true diff --git a/ci/ansible/roles/osdslet/tasks/main.yml b/ci/ansible/roles/osdslet/tasks/main.yml old mode 100644 new mode 100755 index 2c3e0aa..14ab40e --- a/ci/ansible/roles/osdslet/tasks/main.yml +++ b/ci/ansible/roles/osdslet/tasks/main.yml @@ -1,15 +1,26 @@ ---- -- name: run osdslet daemon service - shell: - cmd: | - i=0 - while - i="$((i+1))" - [ "$i" -lt 4 ] - do - nohup bin/osdslet > osdslet.out 2> osdslet.err < /dev/null & - sleep 5 - ps aux | grep osdslet | grep -v grep && break - done - args: - chdir: "{{ opensds_build_dir }}/out" +--- +- name: run osdslet daemon service + shell: + cmd: | + i=0 + while + i="$((i+1))" + [ "$i" -lt 4 ] + do + nohup bin/osdslet > osdslet.out 2> osdslet.err < /dev/null & + sleep 5 + ps aux | grep osdslet | grep -v grep && break + done + args: + chdir: "{{ opensds_build_dir }}/out" + when: container_enabled == false + +- name: run osdslet containerized service + docker: + name: osdslet + image: opensdsio/opensds-controller:latest + state: started + net: host + volumes: + - "/etc/opensds/:/etc/opensds" + when: container_enabled == true diff --git a/ci/ansible/site.yml b/ci/ansible/site.yml old mode 100644 new mode 100755 index 40d5950..ea43610 --- a/ci/ansible/site.yml +++ b/ci/ansible/site.yml @@ -1,18 +1,18 @@ ---- -# Defines deployment design and assigns role to server groups - -- name: deploy an opensds local cluster - hosts: all - remote_user: root - vars_files: - - group_vars/common.yml - - group_vars/osdsdb.yml - - group_vars/osdslet.yml - - group_vars/osdsdock.yml - gather_facts: false - become: True - roles: - - common - - osdsdb - - osdslet - - osdsdock +--- +# Defines deployment design and assigns role to server groups + +- name: deploy an opensds local cluster + hosts: all + remote_user: root + vars_files: + - group_vars/common.yml + - group_vars/osdsdb.yml + - group_vars/osdslet.yml + - group_vars/osdsdock.yml + gather_facts: false + become: True + roles: + - common + - osdsdb + - osdslet + - osdsdock -- cgit 1.2.3-korg