summaryrefslogtreecommitdiffstats
path: root/src/ceph/doc/rados/operations/control.rst
diff options
context:
space:
mode:
Diffstat (limited to 'src/ceph/doc/rados/operations/control.rst')
-rw-r--r--src/ceph/doc/rados/operations/control.rst453
1 files changed, 453 insertions, 0 deletions
diff --git a/src/ceph/doc/rados/operations/control.rst b/src/ceph/doc/rados/operations/control.rst
new file mode 100644
index 0000000..1a58076
--- /dev/null
+++ b/src/ceph/doc/rados/operations/control.rst
@@ -0,0 +1,453 @@
+.. index:: control, commands
+
+==================
+ Control Commands
+==================
+
+
+Monitor Commands
+================
+
+Monitor commands are issued using the ceph utility::
+
+ ceph [-m monhost] {command}
+
+The command is usually (though not always) of the form::
+
+ ceph {subsystem} {command}
+
+
+System Commands
+===============
+
+Execute the following to display the current status of the cluster. ::
+
+ ceph -s
+ ceph status
+
+Execute the following to display a running summary of the status of the cluster,
+and major events. ::
+
+ ceph -w
+
+Execute the following to show the monitor quorum, including which monitors are
+participating and which one is the leader. ::
+
+ ceph quorum_status
+
+Execute the following to query the status of a single monitor, including whether
+or not it is in the quorum. ::
+
+ ceph [-m monhost] mon_status
+
+
+Authentication Subsystem
+========================
+
+To add a keyring for an OSD, execute the following::
+
+ ceph auth add {osd} {--in-file|-i} {path-to-osd-keyring}
+
+To list the cluster's keys and their capabilities, execute the following::
+
+ ceph auth ls
+
+
+Placement Group Subsystem
+=========================
+
+To display the statistics for all placement groups, execute the following::
+
+ ceph pg dump [--format {format}]
+
+The valid formats are ``plain`` (default) and ``json``.
+
+To display the statistics for all placement groups stuck in a specified state,
+execute the following::
+
+ ceph pg dump_stuck inactive|unclean|stale|undersized|degraded [--format {format}] [-t|--threshold {seconds}]
+
+
+``--format`` may be ``plain`` (default) or ``json``
+
+``--threshold`` defines how many seconds "stuck" is (default: 300)
+
+**Inactive** Placement groups cannot process reads or writes because they are waiting for an OSD
+with the most up-to-date data to come back.
+
+**Unclean** Placement groups contain objects that are not replicated the desired number
+of times. They should be recovering.
+
+**Stale** Placement groups are in an unknown state - the OSDs that host them have not
+reported to the monitor cluster in a while (configured by
+``mon_osd_report_timeout``).
+
+Delete "lost" objects or revert them to their prior state, either a previous version
+or delete them if they were just created. ::
+
+ ceph pg {pgid} mark_unfound_lost revert|delete
+
+
+OSD Subsystem
+=============
+
+Query OSD subsystem status. ::
+
+ ceph osd stat
+
+Write a copy of the most recent OSD map to a file. See
+`osdmaptool`_. ::
+
+ ceph osd getmap -o file
+
+.. _osdmaptool: ../../man/8/osdmaptool
+
+Write a copy of the crush map from the most recent OSD map to
+file. ::
+
+ ceph osd getcrushmap -o file
+
+The foregoing functionally equivalent to ::
+
+ ceph osd getmap -o /tmp/osdmap
+ osdmaptool /tmp/osdmap --export-crush file
+
+Dump the OSD map. Valid formats for ``-f`` are ``plain`` and ``json``. If no
+``--format`` option is given, the OSD map is dumped as plain text. ::
+
+ ceph osd dump [--format {format}]
+
+Dump the OSD map as a tree with one line per OSD containing weight
+and state. ::
+
+ ceph osd tree [--format {format}]
+
+Find out where a specific object is or would be stored in the system::
+
+ ceph osd map <pool-name> <object-name>
+
+Add or move a new item (OSD) with the given id/name/weight at the specified
+location. ::
+
+ ceph osd crush set {id} {weight} [{loc1} [{loc2} ...]]
+
+Remove an existing item (OSD) from the CRUSH map. ::
+
+ ceph osd crush remove {name}
+
+Remove an existing bucket from the CRUSH map. ::
+
+ ceph osd crush remove {bucket-name}
+
+Move an existing bucket from one position in the hierarchy to another. ::
+
+ ceph osd crush move {id} {loc1} [{loc2} ...]
+
+Set the weight of the item given by ``{name}`` to ``{weight}``. ::
+
+ ceph osd crush reweight {name} {weight}
+
+Mark an OSD as lost. This may result in permanent data loss. Use with caution. ::
+
+ ceph osd lost {id} [--yes-i-really-mean-it]
+
+Create a new OSD. If no UUID is given, it will be set automatically when the OSD
+starts up. ::
+
+ ceph osd create [{uuid}]
+
+Remove the given OSD(s). ::
+
+ ceph osd rm [{id}...]
+
+Query the current max_osd parameter in the OSD map. ::
+
+ ceph osd getmaxosd
+
+Import the given crush map. ::
+
+ ceph osd setcrushmap -i file
+
+Set the ``max_osd`` parameter in the OSD map. This is necessary when
+expanding the storage cluster. ::
+
+ ceph osd setmaxosd
+
+Mark OSD ``{osd-num}`` down. ::
+
+ ceph osd down {osd-num}
+
+Mark OSD ``{osd-num}`` out of the distribution (i.e. allocated no data). ::
+
+ ceph osd out {osd-num}
+
+Mark ``{osd-num}`` in the distribution (i.e. allocated data). ::
+
+ ceph osd in {osd-num}
+
+Set or clear the pause flags in the OSD map. If set, no IO requests
+will be sent to any OSD. Clearing the flags via unpause results in
+resending pending requests. ::
+
+ ceph osd pause
+ ceph osd unpause
+
+Set the weight of ``{osd-num}`` to ``{weight}``. Two OSDs with the
+same weight will receive roughly the same number of I/O requests and
+store approximately the same amount of data. ``ceph osd reweight``
+sets an override weight on the OSD. This value is in the range 0 to 1,
+and forces CRUSH to re-place (1-weight) of the data that would
+otherwise live on this drive. It does not change the weights assigned
+to the buckets above the OSD in the crush map, and is a corrective
+measure in case the normal CRUSH distribution is not working out quite
+right. For instance, if one of your OSDs is at 90% and the others are
+at 50%, you could reduce this weight to try and compensate for it. ::
+
+ ceph osd reweight {osd-num} {weight}
+
+Reweights all the OSDs by reducing the weight of OSDs which are
+heavily overused. By default it will adjust the weights downward on
+OSDs which have 120% of the average utilization, but if you include
+threshold it will use that percentage instead. ::
+
+ ceph osd reweight-by-utilization [threshold]
+
+Describes what reweight-by-utilization would do. ::
+
+ ceph osd test-reweight-by-utilization
+
+Adds/removes the address to/from the blacklist. When adding an address,
+you can specify how long it should be blacklisted in seconds; otherwise,
+it will default to 1 hour. A blacklisted address is prevented from
+connecting to any OSD. Blacklisting is most often used to prevent a
+lagging metadata server from making bad changes to data on the OSDs.
+
+These commands are mostly only useful for failure testing, as
+blacklists are normally maintained automatically and shouldn't need
+manual intervention. ::
+
+ ceph osd blacklist add ADDRESS[:source_port] [TIME]
+ ceph osd blacklist rm ADDRESS[:source_port]
+
+Creates/deletes a snapshot of a pool. ::
+
+ ceph osd pool mksnap {pool-name} {snap-name}
+ ceph osd pool rmsnap {pool-name} {snap-name}
+
+Creates/deletes/renames a storage pool. ::
+
+ ceph osd pool create {pool-name} pg_num [pgp_num]
+ ceph osd pool delete {pool-name} [{pool-name} --yes-i-really-really-mean-it]
+ ceph osd pool rename {old-name} {new-name}
+
+Changes a pool setting. ::
+
+ ceph osd pool set {pool-name} {field} {value}
+
+Valid fields are:
+
+ * ``size``: Sets the number of copies of data in the pool.
+ * ``pg_num``: The placement group number.
+ * ``pgp_num``: Effective number when calculating pg placement.
+ * ``crush_ruleset``: rule number for mapping placement.
+
+Get the value of a pool setting. ::
+
+ ceph osd pool get {pool-name} {field}
+
+Valid fields are:
+
+ * ``pg_num``: The placement group number.
+ * ``pgp_num``: Effective number of placement groups when calculating placement.
+ * ``lpg_num``: The number of local placement groups.
+ * ``lpgp_num``: The number used for placing the local placement groups.
+
+
+Sends a scrub command to OSD ``{osd-num}``. To send the command to all OSDs, use ``*``. ::
+
+ ceph osd scrub {osd-num}
+
+Sends a repair command to OSD.N. To send the command to all OSDs, use ``*``. ::
+
+ ceph osd repair N
+
+Runs a simple throughput benchmark against OSD.N, writing ``TOTAL_DATA_BYTES``
+in write requests of ``BYTES_PER_WRITE`` each. By default, the test
+writes 1 GB in total in 4-MB increments.
+The benchmark is non-destructive and will not overwrite existing live
+OSD data, but might temporarily affect the performance of clients
+concurrently accessing the OSD. ::
+
+ ceph tell osd.N bench [TOTAL_DATA_BYTES] [BYTES_PER_WRITE]
+
+
+MDS Subsystem
+=============
+
+Change configuration parameters on a running mds. ::
+
+ ceph tell mds.{mds-id} injectargs --{switch} {value} [--{switch} {value}]
+
+Example::
+
+ ceph tell mds.0 injectargs --debug_ms 1 --debug_mds 10
+
+Enables debug messages. ::
+
+ ceph mds stat
+
+Displays the status of all metadata servers. ::
+
+ ceph mds fail 0
+
+Marks the active MDS as failed, triggering failover to a standby if present.
+
+.. todo:: ``ceph mds`` subcommands missing docs: set, dump, getmap, stop, setmap
+
+
+Mon Subsystem
+=============
+
+Show monitor stats::
+
+ ceph mon stat
+
+ e2: 3 mons at {a=127.0.0.1:40000/0,b=127.0.0.1:40001/0,c=127.0.0.1:40002/0}, election epoch 6, quorum 0,1,2 a,b,c
+
+
+The ``quorum`` list at the end lists monitor nodes that are part of the current quorum.
+
+This is also available more directly::
+
+ ceph quorum_status -f json-pretty
+
+.. code-block:: javascript
+
+ {
+ "election_epoch": 6,
+ "quorum": [
+ 0,
+ 1,
+ 2
+ ],
+ "quorum_names": [
+ "a",
+ "b",
+ "c"
+ ],
+ "quorum_leader_name": "a",
+ "monmap": {
+ "epoch": 2,
+ "fsid": "ba807e74-b64f-4b72-b43f-597dfe60ddbc",
+ "modified": "2016-12-26 14:42:09.288066",
+ "created": "2016-12-26 14:42:03.573585",
+ "features": {
+ "persistent": [
+ "kraken"
+ ],
+ "optional": []
+ },
+ "mons": [
+ {
+ "rank": 0,
+ "name": "a",
+ "addr": "127.0.0.1:40000\/0",
+ "public_addr": "127.0.0.1:40000\/0"
+ },
+ {
+ "rank": 1,
+ "name": "b",
+ "addr": "127.0.0.1:40001\/0",
+ "public_addr": "127.0.0.1:40001\/0"
+ },
+ {
+ "rank": 2,
+ "name": "c",
+ "addr": "127.0.0.1:40002\/0",
+ "public_addr": "127.0.0.1:40002\/0"
+ }
+ ]
+ }
+ }
+
+
+The above will block until a quorum is reached.
+
+For a status of just the monitor you connect to (use ``-m HOST:PORT``
+to select)::
+
+ ceph mon_status -f json-pretty
+
+
+.. code-block:: javascript
+
+ {
+ "name": "b",
+ "rank": 1,
+ "state": "peon",
+ "election_epoch": 6,
+ "quorum": [
+ 0,
+ 1,
+ 2
+ ],
+ "features": {
+ "required_con": "9025616074522624",
+ "required_mon": [
+ "kraken"
+ ],
+ "quorum_con": "1152921504336314367",
+ "quorum_mon": [
+ "kraken"
+ ]
+ },
+ "outside_quorum": [],
+ "extra_probe_peers": [],
+ "sync_provider": [],
+ "monmap": {
+ "epoch": 2,
+ "fsid": "ba807e74-b64f-4b72-b43f-597dfe60ddbc",
+ "modified": "2016-12-26 14:42:09.288066",
+ "created": "2016-12-26 14:42:03.573585",
+ "features": {
+ "persistent": [
+ "kraken"
+ ],
+ "optional": []
+ },
+ "mons": [
+ {
+ "rank": 0,
+ "name": "a",
+ "addr": "127.0.0.1:40000\/0",
+ "public_addr": "127.0.0.1:40000\/0"
+ },
+ {
+ "rank": 1,
+ "name": "b",
+ "addr": "127.0.0.1:40001\/0",
+ "public_addr": "127.0.0.1:40001\/0"
+ },
+ {
+ "rank": 2,
+ "name": "c",
+ "addr": "127.0.0.1:40002\/0",
+ "public_addr": "127.0.0.1:40002\/0"
+ }
+ ]
+ }
+ }
+
+A dump of the monitor state::
+
+ ceph mon dump
+
+ dumped monmap epoch 2
+ epoch 2
+ fsid ba807e74-b64f-4b72-b43f-597dfe60ddbc
+ last_changed 2016-12-26 14:42:09.288066
+ created 2016-12-26 14:42:03.573585
+ 0: 127.0.0.1:40000/0 mon.a
+ 1: 127.0.0.1:40001/0 mon.b
+ 2: 127.0.0.1:40002/0 mon.c
+