; Copyright (c) 2017 Intel Corporation
;
; Licensed under the Apache License, Version 2.0 (the "License");
; you may not use this file except in compliance with the License.
; You may obtain a copy of the License at
;
;      http:#www.apache.org/licenses/LICENSE-2.0
;
; Unless required by applicable law or agreed to in writing, software
; distributed under the License is distributed on an "AS IS" BASIS,
; WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
; See the License for the specific language governing permissions and
; limitations under the License.

[PIPELINE0]
type = MASTER
core = 0

[PIPELINE1]
type =  ARPICMP
core = 1

pktq_in  = SWQ0 SWQ1 SWQ2 SWQ3
pktq_out = TXQ0.0 TXQ1.0
; ARP route table entries (ip, mask, if_port, nh) hex values with no 0x
arp_route_tbl = (ac102814,ff000000,1,ac102814) (ca106414,ff000000,0,ca106414)
;arp_route_tbl = (ac102814,ff000000,3,ac102814) (ca106414,ff000000,1,ca106414)
; Link MAC addresses in order aa:bb:cc:dd:ee:ff separated by space
;
; Hex values with no leading 0x, MACs in ascending port order starting @P0
ports_mac_list = 00:cb:10:64:14:00 00:ad:10:28:14:00
;
; egress (private interface) info
pktq_in_prv =  RXQ0.0
;
;for pub port <-> prv port mapping (prv, pub)
prv_to_pub_map = (0,1)
prv_que_handler = (0)

[PIPELINE2]
type = VFW
core = 2
pktq_in  = RXQ0.0 RXQ1.0
pktq_out = TXQ0.1 TXQ1.1 SWQ0

n_rules = 4096

;n_flows gets round up to power of 2
n_flows = 1000000
pkt_type = ipv4
traffic_type = 4

; tcp_time_wait controls timeout for closed connection, normally 120
tcp_time_wait = 10
tcp_be_liberal = 0
;udp_unreplied and udp_replied controls udp "connection" timeouts, normally 30/180
;udp_unreplied = 20
;udp_replied = 20

[PIPELINE3]
type = VFW
core = 3
pktq_in  = RXQ0.1 RXQ1.1
pktq_out = TXQ0.2 TXQ1.2 SWQ1

n_rules = 4096

;n_flows gets round up to power of 2
n_flows = 1000000
pkt_type = ipv4
traffic_type = 4

; tcp_time_wait controls timeout for closed connection, normally 120
tcp_time_wait = 10
tcp_be_liberal = 0
;udp_unreplied and udp_replied controls udp "connection" timeouts, normally 30/180
;udp_unreplied = 20
;udp_replied = 20

[PIPELINE4]
type = VFW
core = 4
pktq_in  = RXQ0.2 RXQ1.2
pktq_out = TXQ0.3 TXQ1.3 SWQ2

n_rules = 4096

;n_flows gets round up to power of 2
n_flows = 1000000
pkt_type = ipv4
traffic_type = 4

; tcp_time_wait controls timeout for closed connection, normally 120
tcp_time_wait = 10
tcp_be_liberal = 0
;udp_unreplied and udp_replied controls udp "connection" timeouts, normally 30/180
;udp_unreplied = 20
;udp_replied = 20

[PIPELINE5]
type = VFW
core = 5
pktq_in  = RXQ0.3 RXQ1.3
pktq_out = TXQ0.4 TXQ1.4 SWQ3
;
;
n_rules = 4096
;n_flows gets round up to power of 2

n_flows = 1000000
pkt_type = ipv4
traffic_type = 4
; tcp_time_wait controls timeout for closed connection, normally 120
tcp_time_wait = 10

tcp_be_liberal = 0